Hello,
>On Tue, Sep 27, 2016 at 10:43:54PM +0900, 남영민 wrote:
>> This patch adds clock controls in s3c24xx_serial_resume_noirq() to set
>> S3C64XX_UINTM register.
>
>Code looks correct but the commit message is bogus. It does not bring any
>benefit over the code, not mentioning that it is quite cryptic (what does
>the "clock controls" mean?).
>
>Just describe here WHAT is the problem and WHY the fix is needed.
>
>Best regards,
>Krzysztof
>
Thank you for taking your time for the review.
I will improve the commit message applying your suggestions and resend this patch.
Best regards,
Youngmin Nam
>>
>> Signed-off-by: Youngmin Nam <youngmin.nam@xxxxxxxxxxx>
>> ---
>> drivers/tty/serial/samsung.c | 3 +++
>> 1 file changed, 3 insertions(+)
>>
>> diff --git a/drivers/tty/serial/samsung.c
>> b/drivers/tty/serial/samsung.c index ae2095a..97f7b3b 100644
>> --- a/drivers/tty/serial/samsung.c
>> +++ b/drivers/tty/serial/samsung.c
>> @@ -1921,6 +1921,7 @@ static int s3c24xx_serial_resume(struct device
>> *dev) static int s3c24xx_serial_resume_noirq(struct device *dev) {
>> struct uart_port *port = s3c24xx_dev_to_port(dev);
>> + struct s3c24xx_uart_port *ourport = to_ourport(port);
>>
>> if (port) {
>> /* restore IRQ mask */
>> @@ -1930,7 +1931,9 @@ static int s3c24xx_serial_resume_noirq(struct
>device *dev)
>> uintm &= ~S3C64XX_UINTM_TXD_MSK;
>> if (rx_enabled(port))
>> uintm &= ~S3C64XX_UINTM_RXD_MSK;
>> + clk_prepare_enable(ourport->clk);
>> wr_regl(port, S3C64XX_UINTM, uintm);
>> + clk_disable_unprepare(ourport->clk);
>> }
>> }
>>
>> --
>> 2.8.1
>>
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe
>> linux-samsung-soc" in the body of a message to
>> majordomo@xxxxxxxxxxxxxxx More majordomo info at
>http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
