The mxs-auart driver does not count FIFO overrun errors. These errors never appear in /proc/tty/driver/ttyAPP. This is because the OERR status bit is masked by read_status_mask in the rx interrupt function, but the AUART_STAT_OERR bit is never set in read_status_mask. The patch enables the counting of overrun errors. Signed-off-by: Wolfgang Ocker <weo@xxxxxxxxxxxx> --- drivers/tty/serial/mxs-auart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index 770454e0dfa3..8c1c9112b3fd 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -1016,7 +1016,7 @@ static void mxs_auart_settermios(struct uart_port *u, ctrl |= AUART_LINECTRL_EPS; } - u->read_status_mask = 0; + u->read_status_mask = AUART_STAT_OERR; if (termios->c_iflag & INPCK) u->read_status_mask |= AUART_STAT_PERR; -- 2.10.0 -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
