The following changes since commit a909d3e636995ba7c349e2ca5dbb528154d4ac30:
Linux 4.9-rc3 (2016-10-29 13:52:02 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git/ tags/tty-4.10-rc1
for you to fetch changes up to a9b01b5823f73dc741b623dfc52ccd68f8139b55:
serial: 8250_mid fix calltrace when hotplug 8250 serial controller (2016-11-30 13:06:08 +0100)
----------------------------------------------------------------
TTY/Serial patches for 4.10-rc1
Here's the tty/serial patchset for 4.10-rc1.
It's been a quiet kernel cycle for this subsystem, just a small number
of changes. A few new serial drivers, and some cleanups to the old
vgacon logic, and other minor serial driver changes as well.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
----------------------------------------------------------------
Aleksey Makarov (1):
serial: pl011: add console matching function
Andy Shevchenko (6):
serial: 8250_lpss: set PCI master only for private DMA
serial: 8250_lpss: Try to enable Memory-Write-Invalidate
serial: 8250_lpss: get IRQ via pci_irq_vector()
serial: 8250_port: export serial8250_rpm_{get|put}_tx()
serial: 8250_dma: power off device after TX is done
serial: core: don't check port twice in a row
Angelo Butti (1):
8250: FIX Fourth port offset of Pericom PI7C9X7954 boards
Arnd Bergmann (4):
serial: 8250_pxa: hide early console setup when disabled
serial: pxa2xx: remove __deprecated annotation
serial: pxa2xx: mark PM functions as __maybe_unused
tty: nozomi: avoid sprintf buffer overflow
Askar Safin (1):
tty: typo in comments in drivers/tty/vt/keyboard.c
Ed Blake (3):
serial: 8250: Add IrDA to UART capabilities
serial: 8250: Expose set_ldisc function
serial: 8250_dw: Add support for IrDA SIR mode
Gabriel Krisman Bertazi (1):
serial: 8250_pci: Detach low-level driver during PCI error recovery
Greg Kroah-Hartman (2):
serial: fsl_lpuart: remove build warning
Merge 4.9-rc3 into tty-next
Ji-Ze Hong (Peter Hong) (6):
serial: 8250_fintek: Refactoring read/write method
serial: 8250_fintek: Set IRQ Mode when port probed
serial: 8250_fintek: Set maximum FIFO of F81216H
serial: 8250_fintek: Add F81216 Support
serial: 8250_fintek: Add F81866 Support
serial: 8250_fintek: Add F81865 Support
Jiri Slaby (7):
tty: vt, cleanup and document con_scroll
tty: vt, unify scrolling functions
tty: vgacon+sisusb, move scrolldelta to a common helper
tty: vt, compute vc offsets in advance
tty: vt, rename variables to sane names
vgacon: switch boolean variables to bool
vgacon: remove prehistoric macros
Johan Hovold (3):
tty: amiserial: fix invalid user-pointer check
tty: rocket: fix invalid user-pointer checks
serial: crisv10: fix invalid user-pointer check
Josh Cartwright (1):
sc16is7xx: Drop bogus use of IRQF_ONESHOT
Julia Lawall (1):
tty: nozomi: use permission-specific DEVICE_ATTR variants
Kefeng Wang (1):
tty: amba-pl011: Add earlycon support for SBSA UART
Liwei Song (1):
serial: 8250_mid fix calltrace when hotplug 8250 serial controller
Maciej S. Szmigiero (1):
vt: fix Scroll Lock LED trigger name
Masahiro Yamada (2):
serial: 8250_uniphier: hardcode regshift to avoid unneeded memory read
serial: 8250_uniphier: avoid locking for FCR register write
Nicolae Rosia (2):
tty: serial: fsl_lpuart: add polled console functions
tty: serial: Makefile: move kgdb to be initialized last
Paul Gortmaker (1):
tty: serial: make crisv10 explicitly non-modular
Peter Robinson (1):
tty: serial: Make the STM32 serial port depend on it's arch
Robert Jarzmik (1):
serial: 8250: pxa: add devicetree earlyconsole
Sergey Yanovich (1):
serial: rewrite pxa2xx-uart to use 8250_core
Souptick Joarder (4):
serial: ioc4_serial: Free memory when kzalloc fails during probe
serial: ifx6x60: Free memory when probe fails
serial: sunhv: Free memory when remove() is called
serial: sunsu: Free memory when probe fails
Takatoshi Akiyama (1):
serial: sh-sci: Fix deadlock caused by serial output request
Waiman Long (1):
console: Move userspace I/O out of console_lock to fix lockdep warning
Wolfgang Ocker (1):
mxs-auart: count FIFO overrun errors
Documentation/VGA-softcursor.txt | 12 +-
arch/x86/platform/ce4100/ce4100.c | 2 +-
drivers/tty/amiserial.c | 2 -
drivers/tty/nozomi.c | 51 ++-----
drivers/tty/rocket.c | 4 -
drivers/tty/serial/8250/8250.h | 6 +
drivers/tty/serial/8250/8250_core.c | 7 +-
drivers/tty/serial/8250/8250_dma.c | 9 +-
drivers/tty/serial/8250/8250_dw.c | 22 +++
drivers/tty/serial/8250/8250_fintek.c | 231 ++++++++++++++++++++++++--------
drivers/tty/serial/8250/8250_lpss.c | 7 +-
drivers/tty/serial/8250/8250_mid.c | 4 +-
drivers/tty/serial/8250/8250_of.c | 2 -
drivers/tty/serial/8250/8250_pci.c | 57 +++++++-
drivers/tty/serial/8250/8250_port.c | 18 ++-
drivers/tty/serial/8250/8250_pxa.c | 190 ++++++++++++++++++++++++++
drivers/tty/serial/8250/8250_uniphier.c | 46 ++++---
drivers/tty/serial/8250/Kconfig | 10 ++
drivers/tty/serial/8250/Makefile | 1 +
drivers/tty/serial/Kconfig | 19 ++-
drivers/tty/serial/Makefile | 7 +-
drivers/tty/serial/amba-pl011.c | 56 ++++++++
drivers/tty/serial/crisv10.c | 8 +-
drivers/tty/serial/fsl_lpuart.c | 64 +++++++++
drivers/tty/serial/ifx6x60.c | 1 +
drivers/tty/serial/ioc4_serial.c | 7 +-
drivers/tty/serial/mxs-auart.c | 2 +-
drivers/tty/serial/pxa.c | 2 +
drivers/tty/serial/sc16is7xx.c | 2 +-
drivers/tty/serial/serial_core.c | 17 ++-
drivers/tty/serial/sh-sci.c | 20 +--
drivers/tty/serial/sunhv.c | 3 +-
drivers/tty/serial/sunsu.c | 1 +
drivers/tty/vt/consolemap.c | 115 ++++++++++------
drivers/tty/vt/keyboard.c | 4 +-
drivers/tty/vt/vt.c | 85 ++++++++----
drivers/usb/misc/sisusbvga/sisusb_con.c | 55 ++------
drivers/video/console/fbcon.c | 18 ++-
drivers/video/console/mdacon.c | 7 +-
drivers/video/console/newport_con.c | 8 +-
drivers/video/console/sticon.c | 7 +-
drivers/video/console/vgacon.c | 133 +++++-------------
include/linux/console.h | 16 ++-
include/linux/serial_8250.h | 8 +-
include/linux/serial_core.h | 2 +
include/linux/vt_kern.h | 2 +
46 files changed, 921 insertions(+), 429 deletions(-)
create mode 100644 drivers/tty/serial/8250/8250_pxa.c
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
