Linux PCI
[Prev Page][Next Page]
- Re: [PATCH 0/5] PCI/pwrctl: Ensure that the pwrctl drivers are probed before PCI client drivers
- From: Krzysztof Wilczyński <kw@xxxxxxxxx>
- Re: [PATCH v2 00/10] sysfs: constify struct bin_attribute (Part 1)
- From: Krzysztof Wilczyński <kw@xxxxxxxxx>
- [PATCH v2 08/10] sysfs: implement all BIN_ATTR_* macros in terms of __BIN_ATTR()
- From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
- [PATCH v2 07/10] sysfs: treewide: constify attribute callback of bin_attribute::llseek()
- From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
- [PATCH v2 06/10] sysfs: treewide: constify attribute callback of bin_attribute::mmap()
- From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
- [PATCH v2 04/10] nvmem: core: calculate bin_attribute size through bin_size()
- From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
- [PATCH v2 03/10] PCI/sysfs: Calculate bin_attribute size through bin_size()
- From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
- [PATCH v2 10/10] driver core: Constify attribute arguments of binary attributes
- From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
- [PATCH v2 09/10] sysfs: bin_attribute: add const read/write callback variants
- From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
- [PATCH v2 05/10] sysfs: treewide: constify attribute callback of bin_is_visible()
- From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
- [PATCH v2 00/10] sysfs: constify struct bin_attribute (Part 1)
- From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
- [PATCH v2 02/10] sysfs: introduce callback attribute_group::bin_size
- From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
- [PATCH v2 01/10] sysfs: explicitly pass size to sysfs_add_bin_file_mode_ns()
- From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
- Re: [RFC PATCH 2/7] block: don't merge different kinds of P2P transfers in a single bio
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- Re: [PATCH v4 1/2] PCI: Add enable_device() and disable_device() callbacks for bridges
- From: Marc Zyngier <maz@xxxxxxxxxx>
- IWL errors when reading PCI config through /sys
- From: Jan Šídlo <me@xxxxxxxxx>
- Re: [PATCH] PCI/sysfs: Fix read permissions for VPD attributes
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- Re: [PATCH v6 4/7] PCI: keystone: Add support for PVU-based DMA isolation on AM654
- From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
- [pci:controller/vmd] BUILD SUCCESS 2a530f44f509c0b40e4880723a74de0f225b2650
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v3 2/2] PCI: imx6: Add IOMMU and ITS MSI support for i.MX95
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Re: [PATCH v6 4/7] PCI: keystone: Add support for PVU-based DMA isolation on AM654
- From: Vignesh Raghavendra <vigneshr@xxxxxx>
- [pci:controller/qcom] BUILD SUCCESS ba4a2e2317b9faeca9193ed6d3193ddc3cf2aba3
- From: kernel test robot <lkp@xxxxxxxxx>
- [pci:aspm] BUILD SUCCESS 1f37e72d586f280049e7c177bd47d6350cfbd494
- From: kernel test robot <lkp@xxxxxxxxx>
- [pci:dt-bindings] BUILD SUCCESS d38cc57c14ff9590e03da77987217eca19ea350d
- From: kernel test robot <lkp@xxxxxxxxx>
- [pci:bwctrl] BUILD REGRESSION 5ccc52fd1e5a9a7602b6e20ce931a7fd4f3be87b
- From: kernel test robot <lkp@xxxxxxxxx>
- [pci:controller/microchip] BUILD SUCCESS e071e6bd994056e31b445b7ab2255076777e426d
- From: kernel test robot <lkp@xxxxxxxxx>
- [pci:endpoint] BUILD SUCCESS f68da9a671739adacc02a6fcb5d0a4806147ecfa
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v3 2/2] PCI: imx6: Add IOMMU and ITS MSI support for i.MX95
- From: Marc Zyngier <maz@xxxxxxxxxx>
- Re: pcie_bwctrl fails to probe on Rpi 4 (linux-next-20241101)
- From: Stefan Wahren <wahrenst@xxxxxxx>
- [pci:bwctrl 2/5] drivers/pci/msi/../pci.h:834:1: error: expected identifier or '('
- From: kernel test robot <lkp@xxxxxxxxx>
- [pci:bwctrl 2/5] drivers/pci/msi/../pci.h:834:1: error: expected identifier or '(' before '{' token
- From: kernel test robot <lkp@xxxxxxxxx>
- [PATCH] PCI: Fix typos
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: pcie_bwctrl fails to probe on Rpi 4 (linux-next-20241101)
- From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
- Re: [PATCH v3 2/2] PCI: imx6: Add IOMMU and ITS MSI support for i.MX95
- From: Frank Li <Frank.li@xxxxxxx>
- Re: [PATCH v3 2/2] PCI: mediatek-gen3: Add support for restricting link width
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Re: [PATCH v3 1/2] PCI: mediatek-gen3: Add support for setting max-link-speed limit
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Re: [PATCH 0/2] PCI: {qcom-ep/tegra194}: Move endpoint cleanups to PERST# deassert handler
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Re: [PATCH v3 05/12] PCI: of_property: Assign PCI instead of CPU bus address to dynamic bridge nodes
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- pcie_bwctrl fails to probe on Rpi 4 (linux-next-20241101)
- From: Stefan Wahren <wahrenst@xxxxxxx>
- [PATCH RFC 2/2] PCI: endpoint: Fix that API pci_epc_remove_epf() cleans up wrong EPC of EPF
- From: Zijun Hu <zijun_hu@xxxxxxxxxx>
- [PATCH RFC 1/2] PCI: endpoint: Fix API pci_epc_destroy() releasing domain_nr ID faults
- From: Zijun Hu <zijun_hu@xxxxxxxxxx>
- [PATCH RFC 0/2] PCI: endpoint: fix bugs for both API pci_epc_destroy() and pci_epc_remove_epf()
- From: Zijun Hu <zijun_hu@xxxxxxxxxx>
- Re: [PATCH] PCI: j721e: Deassert PERST# after a delay of PCIE_T_PVPERL_MS ms
- From: Krzysztof Wilczyński <kw@xxxxxxxxx>
- Re: [PATCH v3 1/2] PCI: Add enable_device() and disable_device() callbacks for bridges
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Re: [PATCH v3 1/2] PCI: Add enable_device() and disable_device() callbacks for bridges
- From: Marc Zyngier <maz@xxxxxxxxxx>
- [PATCH v2 2/2] PCI: endpoint: Simplify API pci_epc_get() implementation
- From: Zijun Hu <zijun_hu@xxxxxxxxxx>
- [PATCH v2 1/2] PCI: endpoint: Fix that API devm_pci_epc_destroy() fails to destroy the EPC device
- From: Zijun Hu <zijun_hu@xxxxxxxxxx>
- [PATCH v2 0/2] PCI: endpoint: fix bug for an API and simplify another API
- From: Zijun Hu <zijun_hu@xxxxxxxxxx>
- Re: [PATCH v4] PCI: imx6: Add suspend/resume support for i.MX6QDL
- From: Krzysztof Wilczyński <kw@xxxxxxxxx>
- Re: [PATCH v3 1/2] PCI: Add enable_device() and disable_device() callbacks for bridges
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Re: [PATCH v5 2/2] PCI: microchip: rework reg region handing to support using either instance 1 or 2
- From: Krzysztof Wilczyński <kw@xxxxxxxxx>
- Re: [PATCH v5 0/2] PCI: microchip: support using either instance 1 or 2
- From: Krzysztof Wilczyński <kw@xxxxxxxxx>
- Re: [PATCH v3 2/2] PCI: imx6: Add IOMMU and ITS MSI support for i.MX95
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- [pci:thunderbolt] BUILD SUCCESS 591dcd25b1f0d5e5744b17fd9f2f615131f91c98
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH 2/2] PCI: dwc: ep: Use align addr function for dw_pcie_ep_raise_{msi,msix}_irq()
- From: Krzysztof Wilczyński <kw@xxxxxxxxx>
- Re: [PATCH 1/2] PCI: dwc: ep: Fix dw_pcie_ep_align_addr()
- From: Krzysztof Wilczyński <kw@xxxxxxxxx>
- Re: [PATCH v3 1/2] PCI: Add enable_device() and disable_device() callbacks for bridges
- From: Marc Zyngier <maz@xxxxxxxxxx>
- Re: [PATCH v2] PCI: endpoint: test: Synchronously cancel command handler work
- From: Krzysztof Wilczyński <kw@xxxxxxxxx>
- Re: [PATCH v3 1/2] PCI: Add enable_device() and disable_device() callbacks for bridges
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Re: [PATCH v2] PCI: endpoint: Improve pci_epc_ops::align_addr() interface
- From: Krzysztof Wilczyński <kw@xxxxxxxxx>
- [pci:typos] BUILD SUCCESS 67096efe8d6564dda4aa4cbabe653add066ef850
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [RFC PATCH 2/7] block: don't merge different kinds of P2P transfers in a single bio
- From: Zhu Yanjun <yanjun.zhu@xxxxxxxxx>
- Re: [GIT PULL] PCI fixes for v6.12
- From: pr-tracker-bot@xxxxxxxxxx
- [PATCH] ata: ahci: Don't call pci_intx() directly
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- Re: [PATCH v6 2/2] PCI: Enable runtime pm of the host bridge
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH v2 0/14] Enable CXL PCIe port protocol error handling and logging
- From: Fan Ni <nifan.cxl@xxxxxxxxx>
- [PATCH v4 2/2] PCI: imx6: Add IOMMU and ITS MSI support for i.MX95
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v4 1/2] PCI: Add enable_device() and disable_device() callbacks for bridges
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v4 0/2] PCI: add enabe(disable)_device() hook for bridge
- From: Frank Li <Frank.Li@xxxxxxx>
- [GIT PULL] PCI fixes for v6.12
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH v5 2/2] PCI: microchip: rework reg region handing to support using either instance 1 or 2
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH v6 net-next 02/12] dt-bindings: net: add i.MX95 ENETC support
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v4] PCI: imx6: Add suspend/resume support for i.MX6QDL
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCHv2 2/2] pci: warn if a running device is unaware of reset
- From: Keith Busch <kbusch@xxxxxxxxxx>
- Re: [PATCH v2 0/14] Enable CXL PCIe port protocol error handling and logging
- From: Fan Ni <nifan.cxl@xxxxxxxxx>
- Re: [PATCH v2 0/14] Enable CXL PCIe port protocol error handling and logging
- From: "Bowman, Terry" <terry.bowman@xxxxxxx>
- Re: [PATCH 2/2] PCI: dwc: ep: Use align addr function for dw_pcie_ep_raise_{msi,msix}_irq()
- From: Niklas Cassel <cassel@xxxxxxxxxx>
- Re: [PATCH v2 0/14] Enable CXL PCIe port protocol error handling and logging
- From: Fan Ni <nifan.cxl@xxxxxxxxx>
- Re: [PATCH v3 2/2] PCI: imx6: Add IOMMU and ITS MSI support for i.MX95
- From: Robin Murphy <robin.murphy@xxxxxxx>
- Re: [PATCH v3 1/2] PCI: Add enable_device() and disable_device() callbacks for bridges
- From: Marc Zyngier <maz@xxxxxxxxxx>
- Re: [PATCH] PCI/sysfs: Fix read permissions for VPD attributes
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH v3 3/3] PCI: qcom: Update ICC and OPP values during link up event
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH v3 2/3] PCI: qcom: Set linkup_irq if global IRQ handler is present
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH v3 1/3] PCI: dwc: Skip waiting for link up if vendor drivers can detect Link up event
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- [pci:vpd] BUILD SUCCESS 34742a5f97c1fd52f4b115e24be9f7ab27d89409
- From: kernel test robot <lkp@xxxxxxxxx>
- [pci:next] BUILD SUCCESS 87f9a42bd6c1a7258425715ff9cd77c7e6316b48
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH] PCI/sysfs: Fix read permissions for VPD attributes
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- Re: [PATCH v2 06/14] PCI/AER: Change AER driver to read UCE fatal status for all CXL PCIe port devices
- From: "Bowman, Terry" <terry.bowman@xxxxxxx>
- Re: [PATCH v4 03/10] irqchip: Add Broadcom bcm2712 MSI-X interrupt controller
- From: Stanimir Varbanov <svarbanov@xxxxxxx>
- [PATCH v3 3/3] PCI: qcom: Update ICC and OPP values during link up event
- From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
- [PATCH v3 2/3] PCI: qcom: Set linkup_irq if global IRQ handler is present
- From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
- [PATCH v3 1/3] PCI: dwc: Skip waiting for link up if vendor drivers can detect Link up event
- From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
- [PATCH v3 0/3] PCI: dwc: Skip waiting for link up if vendor drivers can detect Link up event
- From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
- [no subject]
- Re: [PATCH v1 08/17] dma-mapping: add a dma_need_unmap helper
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- Re: [PATCH v4] Export PBEC Data register into sysfs
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v4 net-next 03/13] dt-bindings: net: add bindings for NETC blocks control
- From: Vladimir Oltean <vladimir.oltean@xxxxxxx>
- Re: [PATCH] ALSA: hda: intel: Switch to pci_alloc_irq_vectors API
- From: Takashi Iwai <tiwai@xxxxxxx>
- [pci:controller/imx6] BUILD SUCCESS 49a8f8a8419417b95386c43402d2e8f24ec84b50
- From: kernel test robot <lkp@xxxxxxxxx>
- [pci:controller/microchip] BUILD SUCCESS 61efe7e328bc4e9a646d78cc6c3b0525fc10bb70
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH 2/2] PCI: dwc: ep: Use align addr function for dw_pcie_ep_raise_{msi,msix}_irq()
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Re: [PATCH 1/2] PCI: dwc: ep: Fix dw_pcie_ep_align_addr()
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- [PATCH v6 10/10] arm64: dts: imx95: Add ref clock for i.MX95 PCIe
- From: Richard Zhu <hongxing.zhu@xxxxxxx>
- [PATCH v6 09/10] PCI: imx6: Add i.MX8MQ i.MX8Q and i.MX95 PCIe PM support
- From: Richard Zhu <hongxing.zhu@xxxxxxx>
- [PATCH v6 08/10] PCI: imx6: Use dwc common suspend resume method
- From: Richard Zhu <hongxing.zhu@xxxxxxx>
- [PATCH v6 07/10] PCI: imx6: Clean up codes by removing imx7d_pcie_init_phy()
- From: Richard Zhu <hongxing.zhu@xxxxxxx>
- [PATCH v6 06/10] PCI: imx6: Fix the missing reference clock disable logic
- From: Richard Zhu <hongxing.zhu@xxxxxxx>
- [PATCH v6 05/10] PCI: imx6: Make core reset assertion deassertion symmetric
- From: Richard Zhu <hongxing.zhu@xxxxxxx>
- [PATCH v6 04/10] PCI: imx6: Correct controller_id generation logic for i.MX7D
- From: Richard Zhu <hongxing.zhu@xxxxxxx>
- [PATCH v6 03/10] PCI: imx6: Fetch dbi2 and iATU base addesses from DT
- From: Richard Zhu <hongxing.zhu@xxxxxxx>
- [PATCH v6 02/10] PCI: imx6: Add ref clock for i.MX95 PCIe
- From: Richard Zhu <hongxing.zhu@xxxxxxx>
- [PATCH v6 01/10] dt-bindings: imx6q-pcie: Add ref clock for i.MX95 PCIe RC
- From: Richard Zhu <hongxing.zhu@xxxxxxx>
- [PATCH v6 0/10] A bunch of changes to refine i.MX PCIe driver
- From: Richard Zhu <hongxing.zhu@xxxxxxx>
- Re: [RFC PATCH 2/7] block: don't merge different kinds of P2P transfers in a single bio
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- Re: [PATCH v3 07/12] clk: rp1: Add support for clocks provided by RP1
- From: kernel test robot <lkp@xxxxxxxxx>
- [PATCH v8 4/5] PCI: qcom: Disable ASPM L0s for X1E80100
- From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
- [PATCH v8 2/5] dt-bindings: PCI: qcom,pcie-x1e80100: Add 'global' interrupt
- From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
- [PATCH v8 5/5] arm64: dts: qcom: x1e80100: Add support for PCIe3 on x1e80100
- From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
- [PATCH v8 1/5] dt-bindings: PCI: qcom: Move OPP table to qcom,pcie-common.yaml
- From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
- [PATCH v8 0/5] Add support for PCIe3 on x1e80100
- From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
- [PATCH v8 3/5] PCI: qcom: Remove BDF2SID mapping config for SC8280X family SoC
- From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
- RE: [PATCH v4 net-next 03/13] dt-bindings: net: add bindings for NETC blocks control
- From: Wei Fang <wei.fang@xxxxxxx>
- Re: [PATCH v6 2/2] PCI: Enable runtime pm of the host bridge
- From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
- Re: [PATCH] PCI/sysfs: Fix read permissions for VPD attributes
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH 0/5] Add new headers for Hyper-V Dom0
- From: Nuno Das Neves <nunodasneves@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v5 02/10] PCI: imx6: Add ref clock for i.MX95 PCIe
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH 2/2] PCI: dwc: ep: Use align addr function for dw_pcie_ep_raise_{msi,msix}_irq()
- From: Damien Le Moal <dlemoal@xxxxxxxxxx>
- Re: [PATCH v2 04/14] PCI/AER: Modify AER driver logging to report CXL or PCIe bus error type
- From: Fan Ni <nifan.cxl@xxxxxxxxx>
- Re: [PATCH v2 03/14] cxl/pci: Introduce helper functions pcie_is_cxl() and pcie_is_cxl_port()
- From: Fan Ni <nifan.cxl@xxxxxxxxx>
- Re: [PATCH v1 08/17] dma-mapping: add a dma_need_unmap helper
- From: Robin Murphy <robin.murphy@xxxxxxx>
- Re: [PATCH v1 07/17] dma-mapping: Implement link/unlink ranges API
- From: Robin Murphy <robin.murphy@xxxxxxx>
- Re: [PATCH v1 00/17] Provide a new two step DMA mapping API
- From: Robin Murphy <robin.murphy@xxxxxxx>
- Re: [RFC PATCH 2/7] block: don't merge different kinds of P2P transfers in a single bio
- From: Bart Van Assche <bvanassche@xxxxxxx>
- Re: [RFC PATCH 1/7] block: share more code for bio addition helpers
- From: Bart Van Assche <bvanassche@xxxxxxx>
- Re: [PATCH v1 00/17] Provide a new two step DMA mapping API
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- Re: [PATCH 2/2] PCI: dwc: ep: Use align addr function for dw_pcie_ep_raise_{msi,msix}_irq()
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH v2 02/14] PCI/AER: Rename AER driver's interfaces to also indicate CXL PCIe port support
- From: Fan Ni <nifan.cxl@xxxxxxxxx>
- Re: [PATCH v2 01/14] PCI/AER: Introduce 'struct cxl_err_handlers' and add to 'struct pci_driver'
- From: Fan Ni <nifan.cxl@xxxxxxxxx>
- [PATCH] ALSA: hda: intel: Switch to pci_alloc_irq_vectors API
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- Re: [PATCH] x86/cpufeature: Document cpu_feature_enabled() as the default to use
- From: Borislav Petkov <bp@xxxxxxxxx>
- Re: [PATCH 0/5] Add new headers for Hyper-V Dom0
- From: Easwar Hariharan <eahariha@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/5] hyperv: Remove unnecessary #includes
- From: Nuno Das Neves <nunodasneves@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] x86/cpufeature: Document cpu_feature_enabled() as the default to use
- From: Sohil Mehta <sohil.mehta@xxxxxxxxx>
- Re: [PATCH v3 02/12] dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 03/12] dt-bindings: pci: Add common schema for devices accessible through PCI BARs
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v1 00/17] Provide a new two step DMA mapping API
- From: Jens Axboe <axboe@xxxxxxxxx>
- Re: [PATCH v1 00/17] Provide a new two step DMA mapping API
- From: Jens Axboe <axboe@xxxxxxxxx>
- Re: [PATCH] dt-bindings: PCI: qcom,pcie-sm8550: add SAR2130P compatible
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v2 06/14] PCI/AER: Change AER driver to read UCE fatal status for all CXL PCIe port devices
- From: Dave Jiang <dave.jiang@xxxxxxxxx>
- Re: [PATCH v2 05/14] PCI/AER: Add CXL PCIe port correctable error support in AER service driver
- From: Dave Jiang <dave.jiang@xxxxxxxxx>
- [PATCH v4 5/5] tools: PCI: Add 'B' option for test doorbell
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v4 4/5] misc: pci_endpoint_test: Add doorbell test case
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v4 3/5] PCI: endpoint: pci-epf-test: Add doorbell test support
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v4 2/5] PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v4 0/5] PCI: EP: Add RC-to-EP doorbell with platform MSI controller
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v4 1/5] PCI: endpoint: Add pci_epc_get_fn() API for customizable filtering
- From: Frank Li <Frank.Li@xxxxxxx>
- Re: [PATCH v2 04/14] PCI/AER: Modify AER driver logging to report CXL or PCIe bus error type
- From: Dave Jiang <dave.jiang@xxxxxxxxx>
- Re: [PATCH v2 03/14] cxl/pci: Introduce helper functions pcie_is_cxl() and pcie_is_cxl_port()
- From: Dave Jiang <dave.jiang@xxxxxxxxx>
- Re: [PATCH 00/16] AMD NB and SMN rework
- From: Yazen Ghannam <yazen.ghannam@xxxxxxx>
- Re: [PATCH v5 08/10] PCI: imx6: Use dwc common suspend resume method
- From: Frank Li <Frank.li@xxxxxxx>
- Re: [PATCH v2 02/14] PCI/AER: Rename AER driver's interfaces to also indicate CXL PCIe port support
- From: Dave Jiang <dave.jiang@xxxxxxxxx>
- Re: [PATCH v2 01/14] PCI/AER: Introduce 'struct cxl_err_handlers' and add to 'struct pci_driver'
- From: Dave Jiang <dave.jiang@xxxxxxxxx>
- Re: [PATCH v5 04/10] PCI: imx6: Correct controller_id generation logic for i.MX7D
- From: Frank Li <Frank.li@xxxxxxx>
- Re: [PATCH v5 03/10] PCI: imx6: Fetch dbi2 and iATU base addesses from DT
- From: Frank Li <Frank.li@xxxxxxx>
- Re: [PATCH v5 02/10] PCI: imx6: Add ref clock for i.MX95 PCIe
- From: Frank Li <Frank.li@xxxxxxx>
- Re: [PATCH 06/16] x86/amd_nb: Simplify root device search
- From: Yazen Ghannam <yazen.ghannam@xxxxxxx>
- Re: [PATCH 06/16] x86/amd_nb: Simplify root device search
- From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
- Re: [PATCH 06/16] x86/amd_nb: Simplify root device search
- From: Yazen Ghannam <yazen.ghannam@xxxxxxx>
- Re: [PATCH 06/16] x86/amd_nb: Simplify root device search
- From: Yazen Ghannam <yazen.ghannam@xxxxxxx>
- Re: [PATCH v3 11/12] arm64: dts: bcm2712: Add external clock for RP1 chipset on Rpi5
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- Re: [PATCH v3 08/12] pinctrl: rp1: Implement RaspberryPi RP1 gpio support
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- Re: [PATCH v3 03/12] dt-bindings: pci: Add common schema for devices accessible through PCI BARs
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- Re: [PATCH v3 07/12] clk: rp1: Add support for clocks provided by RP1
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v3 02/12] dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- Re: [PATCH v3 10/16] rust: add devres abstraction
- From: Alice Ryhl <aliceryhl@xxxxxxxxxx>
- Re: [PATCH 01/13] PCI: Prepare removing devres from pci_intx()
- From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
- [PATCH v2] PCI: Restore the original INTX_DISABLE bit by pcim_intx()
- From: Takashi Iwai <tiwai@xxxxxxx>
- RE: [PATCH 02/16] x86/amd_nb: Restrict init function to AMD-based systems
- From: Borislav Petkov <bp@xxxxxxxxx>
- RE: [PATCH 06/16] x86/amd_nb: Simplify root device search
- From: "Zhuo, Qiuxu" <qiuxu.zhuo@xxxxxxxxx>
- Re: [PATCH v4 net-next 03/13] dt-bindings: net: add bindings for NETC blocks control
- From: Vladimir Oltean <vladimir.oltean@xxxxxxx>
- Re: [PATCH v3 07/12] clk: rp1: Add support for clocks provided by RP1
- From: kernel test robot <lkp@xxxxxxxxx>
- RE: [PATCH 02/16] x86/amd_nb: Restrict init function to AMD-based systems
- From: "Zhuo, Qiuxu" <qiuxu.zhuo@xxxxxxxxx>
- Re: [PATCH 06/16] x86/amd_nb: Simplify root device search
- From: Borislav Petkov <bp@xxxxxxxxx>
- Re: [PATCH 05/16] x86/amd_nb: Simplify function 4 search
- From: Borislav Petkov <bp@xxxxxxxxx>
- [pci:hotplug] BUILD SUCCESS c7acef99642b763ba585f4a43af999fcdbcc3dc4
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH] PCI/VGA: Don't assume only VGA device found is the boot VGA device
- From: "Luke Jones" <luke@xxxxxxxxxx>
- [pci:devm] BUILD SUCCESS cd94c0b68dce4e751a51bd52fabde359842a3312
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH 02/16] x86/amd_nb: Restrict init function to AMD-based systems
- From: Borislav Petkov <bp@xxxxxxxxx>
- [PATCH] x86/cpufeature: Document cpu_feature_enabled() as the default to use
- From: Borislav Petkov <bp@xxxxxxxxx>
- Re: [PATCH 03/16] x86/amd_nb: Clean up early_is_amd_nb()
- From: Borislav Petkov <bp@xxxxxxxxx>
- RE: [PATCH 06/16] x86/amd_nb: Simplify root device search
- From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
- Re: [PATCH v1 00/17] Provide a new two step DMA mapping API
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- Re: [PATCH v1 00/17] Provide a new two step DMA mapping API
- From: Christoph Hellwig <hch@xxxxxx>
- Re: [PATCH 00/13] Remove implicit devres from pci_intx()
- From: Philipp Stanner <pstanner@xxxxxxxxxx>
- Re: [PATCH 00/13] Remove implicit devres from pci_intx()
- From: Takashi Iwai <tiwai@xxxxxxx>
- Re: [PATCH v3 01/12] dt-bindings: clock: Add RaspberryPi RP1 clock bindings
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- Re: [PATCH v1 00/17] Provide a new two step DMA mapping API
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [pci:bwctrl] BUILD SUCCESS 93b71d7a3f4f473c6973383c57740447f6320db1
- From: kernel test robot <lkp@xxxxxxxxx>
- [pci:endpoint] BUILD SUCCESS 3cbac035c874a4474d2b34b03e08fb5df54decd9
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v1 00/17] Provide a new two step DMA mapping API
- From: Christoph Hellwig <hch@xxxxxx>
- Re: [PATCH v3 15/16] rust: platform: add basic platform device / driver abstractions
- From: Alice Ryhl <aliceryhl@xxxxxxxxxx>
- RE: [PATCH 02/16] x86/amd_nb: Restrict init function to AMD-based systems
- From: "Zhuo, Qiuxu" <qiuxu.zhuo@xxxxxxxxx>
- Re: [PATCH v1 09/17] docs: core-api: document the IOVA-based API
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [PATCH v5 10/10] arm64: dts: imx95: Add ref clock for i.MX95 PCIe
- From: Richard Zhu <hongxing.zhu@xxxxxxx>
- [PATCH v5 09/10] PCI: imx6: Add i.MX8MQ i.MX8Q and i.MX95 PCIe PM support
- From: Richard Zhu <hongxing.zhu@xxxxxxx>
- [PATCH v5 08/10] PCI: imx6: Use dwc common suspend resume method
- From: Richard Zhu <hongxing.zhu@xxxxxxx>
- [PATCH v5 07/10] PCI: imx6: Clean up codes by removing imx7d_pcie_init_phy()
- From: Richard Zhu <hongxing.zhu@xxxxxxx>
- [PATCH v5 06/10] PCI: imx6: Fix the missing reference clock disable logic
- From: Richard Zhu <hongxing.zhu@xxxxxxx>
- [PATCH v5 05/10] PCI: imx6: Make core reset assertion deassertion symmetric
- From: Richard Zhu <hongxing.zhu@xxxxxxx>
- [PATCH v5 04/10] PCI: imx6: Correct controller_id generation logic for i.MX7D
- From: Richard Zhu <hongxing.zhu@xxxxxxx>
- [PATCH v5 03/10] PCI: imx6: Fetch dbi2 and iATU base addesses from DT
- From: Richard Zhu <hongxing.zhu@xxxxxxx>
- [PATCH v5 02/10] PCI: imx6: Add ref clock for i.MX95 PCIe
- From: Richard Zhu <hongxing.zhu@xxxxxxx>
- [PATCH v5 01/10] dt-bindings: imx6q-pcie: Add ref clock for i.MX95 PCIe RC
- From: Richard Zhu <hongxing.zhu@xxxxxxx>
- [PATCH v5 0/10] A bunch of changes to refine i.MX PCIe driver
- From: Richard Zhu <hongxing.zhu@xxxxxxx>
- RE: [PATCH 06/16] x86/amd_nb: Simplify root device search
- From: "Zhuo, Qiuxu" <qiuxu.zhuo@xxxxxxxxx>
- RE: [PATCH v4] Export PBEC Data register into sysfs
- From: "Daisuke Kobayashi (Fujitsu)" <kobayashi.da-06@xxxxxxxxxxx>
- Re: [PATCH v1 1/1] PCI/bwctrl: Check for error code from devm_mutex_init() call
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- RE: [PATCH v2 1/5] PCI/P2PDMA: Don't enforce ACS check for functions of same device
- From: "Kasireddy, Vivek" <vivek.kasireddy@xxxxxxxxx>
- Re: [PATCH v1 00/17] Provide a new two step DMA mapping API
- From: Jens Axboe <axboe@xxxxxxxxx>
- Re: [PATCH v1 09/17] docs: core-api: document the IOVA-based API
- From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
- RE: [PATCH v6 net-next 11/12] net: enetc: add preliminary support for i.MX95 ENETC PF
- From: Wei Fang <wei.fang@xxxxxxx>
- Re: [PATCH] PCI/VGA: Don't assume only VGA device found is the boot VGA device
- From: Kai-Heng Feng <kaihengf@xxxxxxxxxx>
- Re: [PATCH 03/16] x86/amd_nb: Clean up early_is_amd_nb()
- From: Sohil Mehta <sohil.mehta@xxxxxxxxx>
- Re: [PATCH 2/3] PCI/sysfs: Use __free() in reset_method_store()
- From: Keith Busch <kbusch@xxxxxxxxxx>
- Re: [PATCH 00/13] Remove implicit devres from pci_intx()
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH v2 1/5] PCI/P2PDMA: Don't enforce ACS check for functions of same device
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH] PCI: Fix use-after-free of slot->bus on hot remove
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH v2 14/14] cxl/pci: Add support to assign and clear pci_driver::cxl_err_handlers
- From: "Bowman, Terry" <terry.bowman@xxxxxxx>
- Re: [PATCH v2 13/14] cxl/pci: Add trace logging for CXL PCIe port RAS errors
- From: "Bowman, Terry" <terry.bowman@xxxxxxx>
- Re: [PATCH v2 1/5] PCI/P2PDMA: Don't enforce ACS check for functions of same device
- From: Logan Gunthorpe <logang@xxxxxxxxxxxx>
- Re: [PATCH v8 0/6] PCI: Remove most pcim_iounmap_regions() users
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH v6 00/10] Remove pcim_iomap_regions_request_all()
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH v3 1/2] PCI: Add enable_device() and disable_device() callbacks for bridges
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH v6 4/7] PCI: keystone: Add support for PVU-based DMA isolation on AM654
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH v6 0/7] soc: ti: Add and use PVU on K3-AM65 for DMA isolation
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH v2 1/5] PCI/P2PDMA: Don't enforce ACS check for functions of same device
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: Kernel maintainer *CENSORED* on LKML [WAS: linux: Goodbye from a Linux community volunteer]
- From: metux <metux@xxxxxx>
- Re: [PATCH v1 1/1] PCI/bwctrl: Check for error code from devm_mutex_init() call
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH v3 15/16] rust: platform: add basic platform device / driver abstractions
- From: Danilo Krummrich <dakr@xxxxxxxxxx>
- [pci:vpd] BUILD SUCCESS 6ab1878a498b82561b811c5fdf68e3594788b4c7
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v4 5/7] PCI/IOV: Check that VF BAR fits within the reservation
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH v5] PCI: Detect and trust built-in Thunderbolt chips
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- [PATCH v1 1/1] PCI/bwctrl: Check for error code from devm_mutex_init() call
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 14/14] cxl/pci: Add support to assign and clear pci_driver::cxl_err_handlers
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v2 13/14] cxl/pci: Add trace logging for CXL PCIe port RAS errors
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v2 12/14] cxl/pci: Add error handler for CXL PCIe port RAS errors
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v2 11/14] cxl/pci: Rename RAS handler interfaces to also indicate CXL PCIe port support
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v2 10/14] cxl/pci: Map CXL PCIe upstream switch port RAS registers
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v2 09/14] cxl/pci: Map CXL PCIe root port and downstream switch port RAS registers
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v2 08/14] cxl/pci: Change find_cxl_ports() to non-static
- From: "Bowman, Terry" <terry.bowman@xxxxxxx>
- Re: [PATCH v2 05/14] PCI/AER: Add CXL PCIe port correctable error support in AER service driver
- From: "Bowman, Terry" <terry.bowman@xxxxxxx>
- Re: [PATCH v3 15/16] rust: platform: add basic platform device / driver abstractions
- From: Alice Ryhl <aliceryhl@xxxxxxxxxx>
- Re: [PATCH v2 08/14] cxl/pci: Change find_cxl_ports() to non-static
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v2 07/14] PCI/AER: Add CXL PCIe port uncorrectable error recovery in AER service driver
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v2 06/14] PCI/AER: Change AER driver to read UCE fatal status for all CXL PCIe port devices
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v2 01/14] PCI/AER: Introduce 'struct cxl_err_handlers' and add to 'struct pci_driver'
- From: "Bowman, Terry" <terry.bowman@xxxxxxx>
- [PATCH v1 14/17] RDMA/umem: Separate implicit ODP initialization from explicit ODP
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [PATCH v1 17/17] vfio/mlx5: Convert vfio to use DMA link API
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [PATCH v1 16/17] vfio/mlx5: Rewrite create mkey flow to allow better code reuse
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- Re: [PATCH v2 01/14] PCI/AER: Introduce 'struct cxl_err_handlers' and add to 'struct pci_driver'
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- [PATCH v1 15/17] vfio/mlx5: Explicitly use number of pages instead of allocated length
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [PATCH v1 09/17] docs: core-api: document the IOVA-based API
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [PATCH v1 13/17] RDMA/core: Convert UMEM ODP DMA mapping to caching IOVA and page linkage
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [PATCH v1 12/17] RDMA/umem: Store ODP access mask information in PFN
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [PATCH v1 11/17] mm/hmm: provide generic DMA managing logic
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [PATCH v1 10/17] mm/hmm: let users to tag specific PFN with DMA mapped bit
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [PATCH v1 03/17] iommu: generalize the batched sync after map interface
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [PATCH v1 08/17] dma-mapping: add a dma_need_unmap helper
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [PATCH v1 07/17] dma-mapping: Implement link/unlink ranges API
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [PATCH v1 06/17] iommu/dma: Factor out a iommu_dma_map_swiotlb helper
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- Re: [PATCH v2 02/14] PCI/AER: Rename AER driver's interfaces to also indicate CXL PCIe port support
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- [PATCH v1 05/17] dma: Provide an interface to allow allocate IOVA
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [PATCH v1 04/17] dma-mapping: Add check if IOVA can be used
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [PATCH v1 01/17] PCI/P2PDMA: Refactor the p2pdma mapping helpers
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [PATCH v1 02/17] dma-mapping: move the PCI P2PDMA mapping helpers to pci-p2pdma.h
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [PATCH v1 00/17] Provide a new two step DMA mapping API
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- Re: [PATCH v2 05/14] PCI/AER: Add CXL PCIe port correctable error support in AER service driver
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v6 net-next 11/12] net: enetc: add preliminary support for i.MX95 ENETC PF
- From: Frank Li <Frank.li@xxxxxxx>
- Re: Kernel maintainer *CENSORED* on LKML [WAS: linux: Goodbye from a Linux community volunteer]
- From: metux <metux@xxxxxx>
- Re: Maintainers now blocked from kernel.org mail access [WAS Re: linux: Goodbye from a Linux community volunteer]
- From: metux <metux@xxxxxx>
- Re: Kernel maintainer *CENSORED* on LKML [WAS: linux: Goodbye from a Linux community volunteer]
- From: Goran <g@xxxxxxxxxxxx>
- Re: [PATCH v2 03/14] cxl/pci: Introduce helper functions pcie_is_cxl() and pcie_is_cxl_port()
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v2 04/14] PCI/AER: Modify AER driver logging to report CXL or PCIe bus error type
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v6 net-next 02/12] dt-bindings: net: add i.MX95 ENETC support
- From: Frank Li <Frank.li@xxxxxxx>
- Re: linux: Goodbye from a Linux community volunteer
- From: metux <metux@xxxxxx>
- Re: [PATCH 03/16] x86/amd_nb: Clean up early_is_amd_nb()
- From: Yazen Ghannam <yazen.ghannam@xxxxxxx>
- Re: Kernel maintainer *CENSORED* on LKML [WAS: linux: Goodbye from a Linux community volunteer]
- From: metux <metux@xxxxxx>
- Re: [PATCH v3 15/16] rust: platform: add basic platform device / driver abstractions
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v5] PCI: Detect and trust built-in Thunderbolt chips
- From: Lukas Wunner <lukas@xxxxxxxxx>
- Re: [PATCH v3 15/16] rust: platform: add basic platform device / driver abstractions
- From: Rob Herring <robh@xxxxxxxxxx>
- [no subject]
- Re: [PATCH v4 5/7] PCI/IOV: Check that VF BAR fits within the reservation
- From: Michał Winiarski <michal.winiarski@xxxxxxxxx>
- Re: [PATCH v5] PCI: Detect and trust built-in Thunderbolt chips
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- [PATCH v6 10/10] PCI: Remove pcim_iomap_regions_request_all()
- From: Philipp Stanner <pstanner@xxxxxxxxxx>
- [PATCH v6 09/10] ALSA: korg1212: Replace deprecated PCI functions
- From: Philipp Stanner <pstanner@xxxxxxxxxx>
- [PATCH v6 08/10] serial: rp2: Replace deprecated PCI functions
- From: Philipp Stanner <pstanner@xxxxxxxxxx>
- [PATCH v6 07/10] ntb: idt: Replace deprecated PCI functions
- From: Philipp Stanner <pstanner@xxxxxxxxxx>
- [PATCH v6 06/10] wifi: iwlwifi: replace deprecated PCI functions
- From: Philipp Stanner <pstanner@xxxxxxxxxx>
- [PATCH v6 05/10] intel_th: pci: Replace deprecated PCI functions
- From: Philipp Stanner <pstanner@xxxxxxxxxx>
- [PATCH v6 04/10] crypto: marvell - replace deprecated PCI functions
- From: Philipp Stanner <pstanner@xxxxxxxxxx>
- [PATCH v6 03/10] crypto: qat - replace deprecated PCI functions
- From: Philipp Stanner <pstanner@xxxxxxxxxx>
- [PATCH v6 02/10] ata: ahci: Replace deprecated PCI functions
- From: Philipp Stanner <pstanner@xxxxxxxxxx>
- [PATCH v6 01/10] PCI: Make pcim_request_all_regions() a public function
- From: Philipp Stanner <pstanner@xxxxxxxxxx>
- [PATCH v6 00/10] Remove pcim_iomap_regions_request_all()
- From: Philipp Stanner <pstanner@xxxxxxxxxx>
- Re: [PATCH v5] PCI: Detect and trust built-in Thunderbolt chips
- From: Lukas Wunner <lukas@xxxxxxxxx>
- [PATCH v4] PCI: imx6: Add suspend/resume support for i.MX6QDL
- From: Stefan Eichenberger <eichest@xxxxxxxxx>
- [PATCH v6 net-next 12/12] MAINTAINERS: update ENETC driver files and maintainers
- From: Wei Fang <wei.fang@xxxxxxx>
- [PATCH v6 net-next 11/12] net: enetc: add preliminary support for i.MX95 ENETC PF
- From: Wei Fang <wei.fang@xxxxxxx>
- [PATCH v6 net-next 10/12] net: enetc: optimize the allocation of tx_bdr
- From: Wei Fang <wei.fang@xxxxxxx>
- [PATCH v6 net-next 09/12] net: enetc: extract enetc_int_vector_init/destroy() from enetc_alloc_msix()
- From: Wei Fang <wei.fang@xxxxxxx>
- [PATCH v6 net-next 08/12] net: enetc: add i.MX95 EMDIO support
- From: Wei Fang <wei.fang@xxxxxxx>
- [PATCH v6 net-next 07/12] net: enetc: remove ERR050089 workaround for i.MX95
- From: Wei Fang <wei.fang@xxxxxxx>
- [PATCH v6 net-next 06/12] net: enetc: build enetc_pf_common.c as a separate module
- From: Wei Fang <wei.fang@xxxxxxx>
- [PATCH v6 net-next 05/12] net: enetc: extract common ENETC PF parts for LS1028A and i.MX95 platforms
- From: Wei Fang <wei.fang@xxxxxxx>
- [PATCH v6 net-next 04/12] net: enetc: add initial netc-blk-ctrl driver support
- From: Wei Fang <wei.fang@xxxxxxx>
- [PATCH v6 net-next 03/12] dt-bindings: net: add bindings for NETC blocks control
- From: Wei Fang <wei.fang@xxxxxxx>
- [PATCH v6 net-next 02/12] dt-bindings: net: add i.MX95 ENETC support
- From: Wei Fang <wei.fang@xxxxxxx>
- [PATCH v6 net-next 01/12] dt-bindings: net: add compatible string for i.MX95 EMDIO
- From: Wei Fang <wei.fang@xxxxxxx>
- [PATCH v6 net-next 00/12] add basic support for i.MX95 NETC
- From: Wei Fang <wei.fang@xxxxxxx>
- RE: [Intel-wired-lan] [PATCH iwl-next v2 1/2] PCI: Add PCI_VDEVICE_SUB helper macro
- From: "Romanowski, Rafal" <rafal.romanowski@xxxxxxxxx>
- Re: [PATCH v7 6/7] PCI: qcom: Disable ASPM L0s and remove BDF2SID mapping config for X1E80100 SoC
- From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
- Re: [PATCH v7 6/7] PCI: qcom: Disable ASPM L0s and remove BDF2SID mapping config for X1E80100 SoC
- From: Johan Hovold <johan@xxxxxxxxxx>
- [pci:next] BUILD SUCCESS b5439ed9dce2d6dcb25ff929b55157786539ad8b
- From: kernel test robot <lkp@xxxxxxxxx>
- [pci:for-linus] BUILD SUCCESS f3c3ccc4fe49dbc560b01d16bebd1b116c46c2b4
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v7 6/7] PCI: qcom: Disable ASPM L0s and remove BDF2SID mapping config for X1E80100 SoC
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Re: [PATCH v7 6/7] PCI: qcom: Disable ASPM L0s and remove BDF2SID mapping config for X1E80100 SoC
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH v7 6/7] PCI: qcom: Disable ASPM L0s and remove BDF2SID mapping config for X1E80100 SoC
- From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
- Re: [PATCH v5] PCI: Detect and trust built-in Thunderbolt chips
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: linux: Goodbye from a Linux community volunteer
- From: Yanteng Si <si.yanteng@xxxxxxxxx>
- Re: [PATCH v5] PCI: Detect and trust built-in Thunderbolt chips
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH] PCI/sysfs: Fix read permissions for VPD attributes
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH v3 11/16] rust: pci: add basic PCI device / driver abstractions
- From: Christian Schrefl <chrisi.schrefl@xxxxxxxxx>
- Re: [PATCH] [RFC] PCI/PM: Do not RPM suspend devices without drivers
- From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
- Re: [PATCH 1/1] RFC: dt bindings: Add property "brcm,gen3-eq-presets"
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH 1/1] RFC: dt bindings: Add property "brcm,gen3-eq-presets"
- From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
- Re: [PATCH 01/18] PCI/P2PDMA: refactor the p2pdma mapping helpers
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- Re: [PATCH rc] PCI: Fix pci_enable_acs() support for the ACS quirks
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- [PATCH v7 7/7] PCI: imx6: Add i.MX8Q PCIe Endpoint (EP) support
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v7 6/7] PCI: imx6: Pass correct sub mode when calling phy_set_mode_ext()
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v7 5/7] dt-bindings: PCI: fsl,imx6q-pcie-ep: Add compatible string fsl,imx8q-pcie-ep
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v7 4/7] PCI: imx6: Remove cpu_addr_fixup()
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v7 3/7] PCI: dwc: ep: Add bus_addr_base for outbound window
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v7 2/7] PCI: dwc: Using parent_bus_addr in of_range to eliminate cpu_addr_fixup()
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v7 1/7] of: address: Add parent_bus_addr to struct of_pci_range
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v7 0/7] PCI: dwc: opitimaze RC Host/EP pci_fixup_addr()
- From: Frank Li <Frank.Li@xxxxxxx>
- Re: [PATCH rc] PCI: Fix pci_enable_acs() support for the ACS quirks
- From: Jason Gunthorpe <jgg@xxxxxxxxxx>
- RE: [PATCH 03/16] x86/amd_nb: Clean up early_is_amd_nb()
- From: "Luck, Tony" <tony.luck@xxxxxxxxx>
- Re: [PATCH 1/1] RFC: dt bindings: Add property "brcm,gen3-eq-presets"
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH 1/1] RFC: dt bindings: Add property "brcm,gen3-eq-presets"
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH v6 2/2] PCI: Enable runtime pm of the host bridge
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH 1/1] RFC: dt bindings: Add property "brcm,gen3-eq-presets"
- From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
- Re: [PATCH 02/18] dma-mapping: move the PCI P2PDMA mapping helpers to pci-p2pdma.h
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH 03/16] x86/amd_nb: Clean up early_is_amd_nb()
- From: Borislav Petkov <bp@xxxxxxxxx>
- Re: [PATCHv2 2/2] pci: warn if a running device is unaware of reset
- From: ameynarkhede03 <ameynarkhede03@xxxxxxxxx>
- Re: [PATCHv2 1/2] pci: provide bus reset attribute
- From: ameynarkhede03 <ameynarkhede03@xxxxxxxxx>
- Re: [PATCH 1/1] RFC: dt bindings: Add property "brcm,gen3-eq-presets"
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH 03/16] x86/amd_nb: Clean up early_is_amd_nb()
- From: Yazen Ghannam <yazen.ghannam@xxxxxxx>
- Re: [PATCH 1/1] RFC: dt bindings: Add property "brcm,gen3-eq-presets"
- From: Jim Quinlan <james.quinlan@xxxxxxxxxxxx>
- Re: [PATCH v3 06/16] rust: add rcu abstraction
- From: Alice Ryhl <aliceryhl@xxxxxxxxxx>
- Re: [PATCH v3 14/16] rust: of: add `of::DeviceId` abstraction
- From: Alice Ryhl <aliceryhl@xxxxxxxxxx>
- Re: [PATCH v3 07/16] rust: add `Revocable` type
- From: Alice Ryhl <aliceryhl@xxxxxxxxxx>
- Re: [PATCH v4 3/7] PCI: Add a helper to convert between standard and IOV resources
- From: Christian König <christian.koenig@xxxxxxx>
- Re: [PATCH v4 2/7] PCI: Add a helper to identify IOV resources
- From: Christian König <christian.koenig@xxxxxxx>
- Re: [PATCH v3 15/16] rust: platform: add basic platform device / driver abstractions
- From: Alice Ryhl <aliceryhl@xxxxxxxxxx>
- Re: [PATCH v4 1/7] PCI/IOV: Restore VF resizable BAR state after reset
- From: Christian König <christian.koenig@xxxxxxx>
- Re: [PATCH v3 03/16] rust: pass module name to `Module::init`
- From: Alice Ryhl <aliceryhl@xxxxxxxxxx>
- Re: [PATCH v3 02/16] rust: introduce `InPlaceModule`
- From: Alice Ryhl <aliceryhl@xxxxxxxxxx>
- Re: [PATCH v3 01/16] rust: init: introduce `Opaque::try_ffi_init`
- From: Alice Ryhl <aliceryhl@xxxxxxxxxx>
- Re: [PATCHv2 2/2] pci: warn if a running device is unaware of reset
- From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
- Re: [PATCH v5 00/14] Fix and improve the Rockchip endpoint driver
- From: Damien Le Moal <dlemoal@xxxxxxxxxx>
- Re: [PATCH 0/2] PCI: dwc: ep: Minor alignment cleanups
- From: Niklas Cassel <cassel@xxxxxxxxxx>
- Re: [PATCH v3 09/16] rust: add `io::Io` base type
- From: Alice Ryhl <aliceryhl@xxxxxxxxxx>
- Re: [PATCH v3 15/16] rust: platform: add basic platform device / driver abstractions
- From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
- Re: [PATCH v3 15/16] rust: platform: add basic platform device / driver abstractions
- From: Danilo Krummrich <dakr@xxxxxxxxxx>
- Re: [PATCH v3 15/16] rust: platform: add basic platform device / driver abstractions
- From: Danilo Krummrich <dakr@xxxxxxxxxx>
- Re: [PATCH v3 09/16] rust: add `io::Io` base type
- From: Danilo Krummrich <dakr@xxxxxxxxxx>
- Re: [PATCH v3 15/16] rust: platform: add basic platform device / driver abstractions
- From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
- Re: [PATCH v3 15/16] rust: platform: add basic platform device / driver abstractions
- From: Danilo Krummrich <dakr@xxxxxxxxxx>
- Re: [PATCH 05/18] dma: Provide an interface to allow allocate IOVA
- From: Christoph Hellwig <hch@xxxxxx>
- Re: [PATCH v3 03/12] dt-bindings: pci: Add common schema for devices accessible through PCI BARs
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 02/12] dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 01/12] dt-bindings: clock: Add RaspberryPi RP1 clock bindings
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 15/16] rust: platform: add basic platform device / driver abstractions
- From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
- Re: [PATCH v6 2/7] PCI: dwc: Using parent_bus_addr in of_range to eliminate cpu_addr_fixup()
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH 1/1] RFC: dt bindings: Add property "brcm,gen3-eq-presets"
- From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
- Re: [PATCH v6 2/7] PCI: dwc: Using parent_bus_addr in of_range to eliminate cpu_addr_fixup()
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v3 07/12] clk: rp1: Add support for clocks provided by RP1
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v3 08/12] pinctrl: rp1: Implement RaspberryPi RP1 gpio support
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v3 08/12] pinctrl: rp1: Implement RaspberryPi RP1 gpio support
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [no subject]
- Re: [RFC PATCH v1 3/3] PCI: vmd: Add WA for VMD PCH rootbus support
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [RFC PATCH v1 2/3] PCI: vmd: Add VMD PCH rootbus support
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [RFC PATCH v1 1/3] PCI: vmd: Clean up vmd_enable_domain function
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH 01/18] PCI/P2PDMA: refactor the p2pdma mapping helpers
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH v3 11/12] arm64: dts: bcm2712: Add external clock for RP1 chipset on Rpi5
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v4 03/10] irqchip: Add Broadcom bcm2712 MSI-X interrupt controller
- From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
- Re: [PATCHv2 2/2] pci: warn if a running device is unaware of reset
- From: Alex Williamson <alex.williamson@xxxxxxxxxx>
- Re: [PATCHv2 1/2] pci: provide bus reset attribute
- From: Alex Williamson <alex.williamson@xxxxxxxxxx>
- [PATCH v6 7/7] PCI: imx6: Add i.MX8Q PCIe Endpoint (EP) support
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v6 6/7] PCI: imx6: Pass correct sub mode when calling phy_set_mode_ext()
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v6 5/7] dt-bindings: PCI: fsl,imx6q-pcie-ep: Add compatible string fsl,imx8q-pcie-ep
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v6 4/7] PCI: imx6: Remove cpu_addr_fixup()
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v6 3/7] PCI: dwc: ep: Add bus_addr_base for outbound window
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v6 2/7] PCI: dwc: Using parent_bus_addr in of_range to eliminate cpu_addr_fixup()
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v6 1/7] of: address: Add parent_bus_addr to struct of_pci_range
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v6 0/7] PCI: dwc: opitimaze RC Host/EP pci_fixup_addr()
- From: Frank Li <Frank.Li@xxxxxxx>
- Re: [PATCH] [RFC] PCI/PM: Do not RPM suspend devices without drivers
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH 1/1] RFC: dt bindings: Add property "brcm,gen3-eq-presets"
- From: James Quinlan <james.quinlan@xxxxxxxxxxxx>
- Re: [PATCH 07/18] dma-mapping: Implement link/unlink ranges API
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- Re: [PATCH 09/18] docs: core-api: document the IOVA-based API
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- Re: [RFC PATCH 2/7] block: don't merge different kinds of P2P transfers in a single bio
- From: Logan Gunthorpe <logang@xxxxxxxxxxxx>
- Re: [PATCH 2/3] PCI/sysfs: Use __free() in reset_method_store()
- From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
- Re: [PATCH 09/18] docs: core-api: document the IOVA-based API
- From: Logan Gunthorpe <logang@xxxxxxxxxxxx>
- Re: [PATCH 02/18] dma-mapping: move the PCI P2PDMA mapping helpers to pci-p2pdma.h
- From: Logan Gunthorpe <logang@xxxxxxxxxxxx>
- Re: [PATCH 01/18] PCI/P2PDMA: refactor the p2pdma mapping helpers
- From: Logan Gunthorpe <logang@xxxxxxxxxxxx>
- Re: [PATCH 2/3] PCI/sysfs: Use __free() in reset_method_store()
- From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
- Re: [PATCH 2/3] PCI/sysfs: Use __free() in reset_method_store()
- From: Keith Busch <kbusch@xxxxxxxxxx>
- Re: [PATCH] [RFC] PCI/PM: Do not RPM suspend devices without drivers
- From: "Wysocki, Rafael J" <rafael.j.wysocki@xxxxxxxxx>
- [PATCH 3/3] PCI/sysfs: Remove unnecessary zero in initializer
- From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
- [PATCH 2/3] PCI/sysfs: Use __free() in reset_method_store()
- From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
- [PATCH 1/3] PCI/sysfs: Move reset related sysfs code to correct file
- From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
- [PATCH 0/3] PCI/sysfs: move to sysfs funcs to pci-sysfs.c & do small tweaks
- From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
- Re: [PATCH v3 05/12] PCI: of_property: Assign PCI instead of CPU bus address to dynamic bridge nodes
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH v4 5/7] PCI/IOV: Check that VF BAR fits within the reservation
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH v4 6/7] PCI: Allow drivers to control VF BAR size
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH v4 1/4] PCI: dwc: ep: Add bus_addr_base for outbound window
- From: Frank Li <Frank.li@xxxxxxx>
- Re: [PATCH v3 09/16] rust: add `io::Io` base type
- From: Alice Ryhl <aliceryhl@xxxxxxxxxx>
- Re: [PATCH v8 0/6] PCI: Remove most pcim_iounmap_regions() users
- From: Philipp Stanner <pstanner@xxxxxxxxxx>
- Re: [PATCH v3 01/12] dt-bindings: clock: Add RaspberryPi RP1 clock bindings
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH v3 10/12] misc: rp1: RaspberryPi RP1 misc driver
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v3 12/12] arm64: defconfig: Enable RP1 misc/clock/gpio drivers
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v3 11/12] arm64: dts: bcm2712: Add external clock for RP1 chipset on Rpi5
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v3 07/12] clk: rp1: Add support for clocks provided by RP1
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v3 08/12] pinctrl: rp1: Implement RaspberryPi RP1 gpio support
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v3 09/12] arm64: dts: rp1: Add support for RaspberryPi's RP1 device
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v3 06/12] of: address: Preserve the flags portion on 1:1 dma-ranges mapping
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v3 05/12] PCI: of_property: Assign PCI instead of CPU bus address to dynamic bridge nodes
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v3 04/12] dt-bindings: misc: Add device specific bindings for RaspberryPi RP1
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v3 03/12] dt-bindings: pci: Add common schema for devices accessible through PCI BARs
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v3 02/12] dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v3 01/12] dt-bindings: clock: Add RaspberryPi RP1 clock bindings
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v3 00/12] Add support for RaspberryPi RP1 PCI device using a DT overlay
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- Re: [PATCH v3 15/16] rust: platform: add basic platform device / driver abstractions
- From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
- Re: [PATCH v3 13/16] samples: rust: add Rust PCI sample driver
- From: Danilo Krummrich <dakr@xxxxxxxxxx>
- Re: [PATCH v4 5/7] PCI/IOV: Check that VF BAR fits within the reservation
- From: Michał Winiarski <michal.winiarski@xxxxxxxxx>
- Re: [PATCH v2 14/14] arm64: defconfig: Enable RP1 misc/clock/gpio drivers
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- Re: [PATCH v3 11/16] rust: pci: add basic PCI device / driver abstractions
- From: Danilo Krummrich <dakr@xxxxxxxxxx>
- Re: [PATCH v3 15/16] rust: platform: add basic platform device / driver abstractions
- From: Danilo Krummrich <dakr@xxxxxxxxxx>
- Re: [PATCH v3 15/16] rust: platform: add basic platform device / driver abstractions
- From: Danilo Krummrich <dakr@xxxxxxxxxx>
- Re: [PATCH v2 11/14] misc: rp1: RaspberryPi RP1 misc driver
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- Re: [PATCH v3 16/16] samples: rust: add Rust platform sample driver
- From: Danilo Krummrich <dakr@xxxxxxxxxx>
- [pci:controller/dwc] BUILD SUCCESS 12dd12821f1eb2755643914df2cc900c5e8c9d12
- From: kernel test robot <lkp@xxxxxxxxx>
- [PATCH] PCI: check bridge->bus in pci_host_common_remove
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH] PCI/sysfs: Fix read permissions for VPD attributes
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- Re: [PATCH 05/18] dma: Provide an interface to allow allocate IOVA
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- Re: [PATCH 05/18] dma: Provide an interface to allow allocate IOVA
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- Re: [PATCH 07/18] dma-mapping: Implement link/unlink ranges API
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- Re: [PATCH 05/18] dma: Provide an interface to allow allocate IOVA
- From: Srinivasulu Thanneeru <dev.srinivasulu@xxxxxxxxx>
- Re: [PATCH 07/18] dma-mapping: Implement link/unlink ranges API
- From: Baolu Lu <baolu.lu@xxxxxxxxxxxxxxx>
- Re: [PATCH 05/18] dma: Provide an interface to allow allocate IOVA
- From: Baolu Lu <baolu.lu@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 0/14] Enable CXL PCIe port protocol error handling and logging
- From: "Bowman, Terry" <terry.bowman@xxxxxxx>
- Re: [PATCH v3 11/16] rust: pci: add basic PCI device / driver abstractions
- From: Boqun Feng <boqun.feng@xxxxxxxxx>
- Re: [PATCH] PCI: dwc: endpoint: Clear outbound address on unmap
- From: Krzysztof Wilczyński <kw@xxxxxxxxx>
- Re: [PATCH v2 0/14] Applies to Base commit: 8cf0b93919e1 (tag: v6.12-rc2) Linux 6.12-rc2
- From: "Bowman, Terry" <terry.bowman@xxxxxxx>
- [RFC PATCH 3/7] blk-mq: add a dma mapping iterator
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [RFC PATCH 7/7] nvme-pci: convert to blk_rq_dma_map
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [RFC PATCH 6/7] nvme-pci: use a better encoding for small prp pool allocations
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [RFC PATCH 5/7] nvme-pci: remove struct nvme_descriptor
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [RFC PATCH 4/7] blk-mq: add scatterlist-less DMA mapping helpers
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [RFC PATCH 0/7] Block and NMMe PCI use of new DMA mapping API
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [RFC PATCH 2/7] block: don't merge different kinds of P2P transfers in a single bio
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [RFC PATCH 1/7] block: share more code for bio addition helpers
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [PATCH 15/18] vfio/mlx5: Explicitly use number of pages instead of allocated length
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [PATCH 18/18] vfio/mlx5: Convert vfio to use DMA link API
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [PATCH 17/18] vfio/mlx5: Explicitly store page list
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [PATCH 16/18] vfio/mlx5: Rewrite create mkey flow to allow better code reuse
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [PATCH 10/18] mm/hmm: let users to tag specific PFN with DMA mapped bit
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [PATCH 14/18] RDMA/umem: Separate implicit ODP initialization from explicit ODP
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [PATCH 13/18] RDMA/core: Convert UMEM ODP DMA mapping to caching IOVA and page linkage
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [PATCH 12/18] RDMA/umem: Store ODP access mask information in PFN
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [PATCH 11/18] mm/hmm: provide generic DMA managing logic
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [PATCH 05/18] dma: Provide an interface to allow allocate IOVA
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [PATCH 09/18] docs: core-api: document the IOVA-based API
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [PATCH 08/18] dma-mapping: add a dma_need_unmap helper
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [PATCH 07/18] dma-mapping: Implement link/unlink ranges API
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [PATCH 06/18] iommu/dma: Factor out a iommu_dma_map_swiotlb helper
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [PATCH 03/18] iommu: generalize the batched sync after map interface
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [PATCH 04/18] dma-mapping: Add check if IOVA can be used
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [PATCH 02/18] dma-mapping: move the PCI P2PDMA mapping helpers to pci-p2pdma.h
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [PATCH 01/18] PCI/P2PDMA: refactor the p2pdma mapping helpers
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- [PATCH 00/18] Provide a new two step DMA mapping API
- From: Leon Romanovsky <leon@xxxxxxxxxx>
- Re: [PATCH v2 10/14] arm64: dts: rp1: Add support for RaspberryPi's RP1 device
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- Re: [PATCH v2 09/14] pinctrl: rp1: Implement RaspberryPi RP1 gpio support
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- Re: [PATCH v2 09/14] pinctrl: rp1: Implement RaspberryPi RP1 gpio support
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- Re: [PATCH v2 08/14] clk: rp1: Add support for clocks provided by RP1
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- Re: [PATCH v2 08/14] clk: rp1: Add support for clocks provided by RP1
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- Re: [PATCH v3 14/16] rust: of: add `of::DeviceId` abstraction
- From: Fabien Parent <fabien.parent@xxxxxxxxxx>
- Re: [PATCH v3 15/16] rust: platform: add basic platform device / driver abstractions
- From: Fabien Parent <fabien.parent@xxxxxxxxxx>
- Re: [PATCH] [RFC] PCI/PM: Do not RPM suspend devices without drivers
- From: Marek Vasut <marex@xxxxxxx>
- RE: [PATCH v5 net-next 02/13] dt-bindings: net: add i.MX95 ENETC support
- From: Wei Fang <wei.fang@xxxxxxx>
- RE: [PATCH v5 net-next 06/13] net: enetc: build enetc_pf_common.c as a separate module
- From: Wei Fang <wei.fang@xxxxxxx>
- Re: [PATCH v4 0/4] PCI: ep: dwc/imx6: Add bus address support for PCI endpoint devices
- From: Frank Li <Frank.li@xxxxxxx>
- RE: [PATCH v4 net-next 03/13] dt-bindings: net: add bindings for NETC blocks control
- From: Wei Fang <wei.fang@xxxxxxx>
- RE: [PATCH v5 net-next 04/13] net: enetc: add initial netc-blk-ctrl driver support
- From: Wei Fang <wei.fang@xxxxxxx>
- RE: [PATCH v5 net-next 11/13] net: enetc: optimize the allocation of tx_bdr
- From: Wei Fang <wei.fang@xxxxxxx>
- Re: [PATCH v5 net-next 05/13] net: enetc: extract common ENETC PF parts for LS1028A and i.MX95 platforms
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v4 4/4] PCI: imx6: Add i.MX8Q PCIe Endpoint (EP) support
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH v4 1/4] PCI: dwc: ep: Add bus_addr_base for outbound window
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- [PATCHv2 2/2] pci: warn if a running device is unaware of reset
- From: Keith Busch <kbusch@xxxxxxxx>
- [PATCHv2 1/2] pci: provide bus reset attribute
- From: Keith Busch <kbusch@xxxxxxxx>
- Re: [PATCH v4 08/10] PCI: brcmstb: Adjust PHY PLL setup to use a 54MHz input refclk
- From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
- Re: [PATCH v4 02/10] dt-bindings: PCI: brcmstb: Update bindings for PCIe on bcm2712
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH v4 7/7] drm/xe/pf: Set VF LMEM BAR size
- From: Michał Winiarski <michal.winiarski@xxxxxxxxx>
- [PATCH v4 6/7] PCI: Allow drivers to control VF BAR size
- From: Michał Winiarski <michal.winiarski@xxxxxxxxx>
- [PATCH v4 5/7] PCI/IOV: Check that VF BAR fits within the reservation
- From: Michał Winiarski <michal.winiarski@xxxxxxxxx>
- [PATCH v4 4/7] PCI: Allow IOV resources to be resized in pci_resize_resource()
- From: Michał Winiarski <michal.winiarski@xxxxxxxxx>
- [PATCH v4 3/7] PCI: Add a helper to convert between standard and IOV resources
- From: Michał Winiarski <michal.winiarski@xxxxxxxxx>
- [PATCH v4 2/7] PCI: Add a helper to identify IOV resources
- From: Michał Winiarski <michal.winiarski@xxxxxxxxx>
- [PATCH v4 1/7] PCI/IOV: Restore VF resizable BAR state after reset
- From: Michał Winiarski <michal.winiarski@xxxxxxxxx>
- [PATCH v4 0/7] PCI: VF resizable BAR
- From: Michał Winiarski <michal.winiarski@xxxxxxxxx>
- Re: [PATCH v4 0/4] PCI: ep: dwc/imx6: Add bus address support for PCI endpoint devices
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH] pci: provide bus reset attribute
- From: Keith Busch <kbusch@xxxxxxxxxx>
- [PATCH v2 14/14] cxl/pci: Add support to assign and clear pci_driver::cxl_err_handlers
- From: Terry Bowman <terry.bowman@xxxxxxx>
- [PATCH v2 13/14] cxl/pci: Add trace logging for CXL PCIe port RAS errors
- From: Terry Bowman <terry.bowman@xxxxxxx>
- [PATCH v2 12/14] cxl/pci: Add error handler for CXL PCIe port RAS errors
- From: Terry Bowman <terry.bowman@xxxxxxx>
- Re: [PATCH v4 0/4] PCI: ep: dwc/imx6: Add bus address support for PCI endpoint devices
- From: Frank Li <Frank.li@xxxxxxx>
- [PATCH v2 11/14] cxl/pci: Rename RAS handler interfaces to also indicate CXL PCIe port support
- From: Terry Bowman <terry.bowman@xxxxxxx>
- [PATCH v2 10/14] cxl/pci: Map CXL PCIe upstream switch port RAS registers
- From: Terry Bowman <terry.bowman@xxxxxxx>
- [PATCH v2 09/14] cxl/pci: Map CXL PCIe root port and downstream switch port RAS registers
- From: Terry Bowman <terry.bowman@xxxxxxx>
- [PATCH v2 08/14] cxl/pci: Change find_cxl_ports() to non-static
- From: Terry Bowman <terry.bowman@xxxxxxx>
- [PATCH v2 07/14] PCI/AER: Add CXL PCIe port uncorrectable error recovery in AER service driver
- From: Terry Bowman <terry.bowman@xxxxxxx>
- [PATCH v2 06/14] PCI/AER: Change AER driver to read UCE fatal status for all CXL PCIe port devices
- From: Terry Bowman <terry.bowman@xxxxxxx>
- [PATCH v2 05/14] PCI/AER: Add CXL PCIe port correctable error support in AER service driver
- From: Terry Bowman <terry.bowman@xxxxxxx>
- [PATCH v2 04/14] PCI/AER: Modify AER driver logging to report CXL or PCIe bus error type
- From: Terry Bowman <terry.bowman@xxxxxxx>
- [PATCH v2 03/14] cxl/pci: Introduce helper functions pcie_is_cxl() and pcie_is_cxl_port()
- From: Terry Bowman <terry.bowman@xxxxxxx>
- [PATCH v2 02/14] PCI/AER: Rename AER driver's interfaces to also indicate CXL PCIe port support
- From: Terry Bowman <terry.bowman@xxxxxxx>
- [PATCH v2 01/14] PCI/AER: Introduce 'struct cxl_err_handlers' and add to 'struct pci_driver'
- From: Terry Bowman <terry.bowman@xxxxxxx>
- [PATCH v2 0/14] Enable CXL PCIe port protocol error handling and logging
- From: Terry Bowman <terry.bowman@xxxxxxx>
- Re: [PATCH v4 0/4] PCI: ep: dwc/imx6: Add bus address support for PCI endpoint devices
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH] pci: provide bus reset attribute
- From: Alex Williamson <alex.williamson@xxxxxxxxxx>
- Re: [GIT PULL] PCI fixes for v6.12
- From: pr-tracker-bot@xxxxxxxxxx
- [GIT PULL] PCI fixes for v6.12
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH] pci: provide bus reset attribute
- From: Keith Busch <kbusch@xxxxxxxxxx>
- Re: [PATCH] pci: provide bus reset attribute
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH v5 2/3] PCI: dwc: Using parent_bus_addr in of_range to eliminate cpu_addr_fixup()
- From: Frank Li <Frank.li@xxxxxxx>
- [pci:next] BUILD SUCCESS 759a3ceba34a59e36d2396f5e16fc260fffa22ca
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH 06/10] wifi: iwlwifi: replace deprecated PCI functions
- From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
- Re: [PATCH 06/10] wifi: iwlwifi: replace deprecated PCI functions
- From: Philipp Stanner <pstanner@xxxxxxxxxx>
- Re: [PATCH 02/10] ata: ahci: Replace deprecated PCI functions
- From: Philipp Stanner <pstanner@xxxxxxxxxx>
- [pci:bwctrl] BUILD SUCCESS 18956ececba637e45fa1f2a91126d0421b3e05a5
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH 06/10] wifi: iwlwifi: replace deprecated PCI functions
- From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
- Re: linux: Goodbye from a Linux community volunteer
- From: Oleksiy Protas <elfy.ua@xxxxxxxxx>
- Re: [PATCH v3 16/16] samples: rust: add Rust platform sample driver
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 03/16] x86/amd_nb: Clean up early_is_amd_nb()
- From: Borislav Petkov <bp@xxxxxxxxx>
- Re: [PATCH 02/10] ata: ahci: Replace deprecated PCI functions
- From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
- Re: [PATCH 06/10] wifi: iwlwifi: replace deprecated PCI functions
- From: Philipp Stanner <pstanner@xxxxxxxxxx>
- Re: [PATCH 06/10] wifi: iwlwifi: replace deprecated PCI functions
- From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
- Re: linux: Goodbye from a Linux community volunteer
- From: "Theodore Ts'o" <tytso@xxxxxxx>
- Re: [PATCH 00/10] Remove pcim_iomap_regions_request_all()
- From: Philipp Stanner <pstanner@xxxxxxxxxx>
- Re: [PATCH] PCI: Restore the original INTX_DISABLE bit by pcim_intx()
- From: Philipp Stanner <pstanner@xxxxxxxxxx>
- Re: [PATCH 01/10] PCI: Make pcim_request_all_regions() a public function
- From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
- [PATCH 08/10] serial: rp2: Replace deprecated PCI functions
- From: Philipp Stanner <pstanner@xxxxxxxxxx>
- [PATCH 10/10] PCI: Remove pcim_iomap_regions_request_all()
- From: Philipp Stanner <pstanner@xxxxxxxxxx>
- [PATCH 09/10] ALSA: korg1212: Replace deprecated PCI functions
- From: Philipp Stanner <pstanner@xxxxxxxxxx>
- [PATCH 07/10] ntb: idt: Replace deprecated PCI functions
- From: Philipp Stanner <pstanner@xxxxxxxxxx>
- [PATCH 05/10] intel_th: pci: Replace deprecated PCI functions
- From: Philipp Stanner <pstanner@xxxxxxxxxx>
- [PATCH 06/10] wifi: iwlwifi: replace deprecated PCI functions
- From: Philipp Stanner <pstanner@xxxxxxxxxx>
- [PATCH 04/10] crypto: marvell - replace deprecated PCI functions
- From: Philipp Stanner <pstanner@xxxxxxxxxx>
- [PATCH 03/10] crypto: qat - replace deprecated PCI functions
- From: Philipp Stanner <pstanner@xxxxxxxxxx>
- [PATCH 02/10] ata: ahci: Replace deprecated PCI functions
- From: Philipp Stanner <pstanner@xxxxxxxxxx>
- [PATCH 01/10] PCI: Make pcim_request_all_regions() a public function
- From: Philipp Stanner <pstanner@xxxxxxxxxx>
- [PATCH 00/10] Remove pcim_iomap_regions_request_all()
- From: Philipp Stanner <pstanner@xxxxxxxxxx>
- Re: [PATCH] PCI: Restore the original INTX_DISABLE bit by pcim_intx()
- From: Takashi Iwai <tiwai@xxxxxxx>
- [PATCH] pci: provide bus reset attribute
- From: Keith Busch <kbusch@xxxxxxxx>
- Re: [PATCH] PCI: Restore the original INTX_DISABLE bit by pcim_intx()
- From: Philipp Stanner <pstanner@xxxxxxxxxx>
- Re: [PATCH v5 net-next 03/13] dt-bindings: net: add bindings for NETC blocks control
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v5 net-next 02/13] dt-bindings: net: add i.MX95 ENETC support
- From: Rob Herring <robh@xxxxxxxxxx>
- [RFC PATCH v1 3/3] PCI: vmd: Add WA for VMD PCH rootbus support
- From: Szymon Durawa <szymon.durawa@xxxxxxxxxxxxxxx>
- [RFC PATCH v1 2/3] PCI: vmd: Add VMD PCH rootbus support
- From: Szymon Durawa <szymon.durawa@xxxxxxxxxxxxxxx>
- [RFC PATCH v1 1/3] PCI: vmd: Clean up vmd_enable_domain function
- From: Szymon Durawa <szymon.durawa@xxxxxxxxxxxxxxx>
- [RFC PATCH v1 0/3] VMD add PCH rootbus support
- From: Szymon Durawa <szymon.durawa@xxxxxxxxxxxxxxx>
- Re: [PATCH 14/16] x86/amd_smn, platform/x86/amd/hsmp: Have HSMP use SMN
- From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
- Re: [PATCH v5 net-next 06/13] net: enetc: build enetc_pf_common.c as a separate module
- From: Vladimir Oltean <vladimir.oltean@xxxxxxx>
- Re: linux: Goodbye from a Linux community volunteer
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: linux: Goodbye from a Linux community volunteer
- From: Andy Shevchenko <andy@xxxxxxxxxx>
- Re: [PATCH v4 net-next 03/13] dt-bindings: net: add bindings for NETC blocks control
- From: Vladimir Oltean <vladimir.oltean@xxxxxxx>
- Re: [PATCH] PCI/VGA: Don't assume only VGA device found is the boot VGA device
- From: Alex Deucher <alexdeucher@xxxxxxxxx>
- [PATCH v4 10/10] arm64: dts: broadcom: bcm2712-rpi-5-b: Enable PCIe DT nodes
- From: Stanimir Varbanov <svarbanov@xxxxxxx>
- [PATCH v4 09/10] arm64: dts: broadcom: bcm2712: Add PCIe DT nodes
- From: Stanimir Varbanov <svarbanov@xxxxxxx>
- [PATCH v4 08/10] PCI: brcmstb: Adjust PHY PLL setup to use a 54MHz input refclk
- From: Stanimir Varbanov <svarbanov@xxxxxxx>
- [PATCH v4 07/10] PCI: brcmstb: Add bcm2712 support
- From: Stanimir Varbanov <svarbanov@xxxxxxx>
- [PATCH v4 06/10] PCI: brcmstb: Enable external MSI-X if available
- From: Stanimir Varbanov <svarbanov@xxxxxxx>
- [PATCH v4 04/10] PCI: brcmstb: Reuse config structure
- From: Stanimir Varbanov <svarbanov@xxxxxxx>
- [PATCH v4 05/10] PCI: brcmstb: Expand inbound window size up to 64GB
- From: Stanimir Varbanov <svarbanov@xxxxxxx>
- [PATCH v4 03/10] irqchip: Add Broadcom bcm2712 MSI-X interrupt controller
- From: Stanimir Varbanov <svarbanov@xxxxxxx>
- [PATCH v4 02/10] dt-bindings: PCI: brcmstb: Update bindings for PCIe on bcm2712
- From: Stanimir Varbanov <svarbanov@xxxxxxx>
- [PATCH v4 01/10] dt-bindings: interrupt-controller: Add bcm2712 MSI-X DT bindings
- From: Stanimir Varbanov <svarbanov@xxxxxxx>
- [PATCH v4 00/10] Add PCIe support for bcm2712
- From: Stanimir Varbanov <svarbanov@xxxxxxx>
- Re: [PATCH v5 net-next 04/13] net: enetc: add initial netc-blk-ctrl driver support
- From: Vladimir Oltean <vladimir.oltean@xxxxxxx>
- [PATCH v4 00/10] Add PCIe support for bcm2712
- From: Stanimir Varbanov <svarbanov@xxxxxxx>
- Re: [PATCH] PCI: Restore the original INTX_DISABLE bit by pcim_intx()
- From: Takashi Iwai <tiwai@xxxxxxx>
- Re: [PATCH v3 16/16] samples: rust: add Rust platform sample driver
- From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
- Re: [PATCH v5 net-next 11/13] net: enetc: optimize the allocation of tx_bdr
- From: Vladimir Oltean <vladimir.oltean@xxxxxxx>
- Re: [PATCH] PCI: Restore the original INTX_DISABLE bit by pcim_intx()
- From: Philipp Stanner <pstanner@xxxxxxxxxx>
- RE: [PATCH v4 net-next 03/13] dt-bindings: net: add bindings for NETC blocks control
- From: Wei Fang <wei.fang@xxxxxxx>
- Re: [PATCH 02/13] ALSA: hda_intel: Use always-managed version of pcim_intx()
- From: Takashi Iwai <tiwai@xxxxxxx>
- Re: [PATCH 02/13] ALSA: hda_intel: Use always-managed version of pcim_intx()
- From: Philipp Stanner <pstanner@xxxxxxxxxx>
- Re: [PATCH v2 11/14] misc: rp1: RaspberryPi RP1 misc driver
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [no subject]
- RE: [PATCH v4 net-next 03/13] dt-bindings: net: add bindings for NETC blocks control
- From: Wei Fang <wei.fang@xxxxxxx>
- Re: [PATCH v2 4/5] PCI/pwrctl: Move pwrctl device creation to its own helper function
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- Re: [PATCH 4/5] PCI/pwrctl: Move pwrctl device creation to its own helper function
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- Re: [PATCH 4/5] PCI/pwrctl: Move pwrctl device creation to its own helper function
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Re: linux: Goodbye from a Linux community volunteer
- From: Andreas Herrmann <aherrmann@xxxxxxx>
- Re: [PATCH v2 1/5] PCI/pwrctl: Use of_platform_device_create() to create pwrctl devices
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [PATCH v2 5/5] PCI/pwrctl: Remove pwrctl device without iterating over all children of pwrctl parent
- From: Manivannan Sadhasivam via B4 Relay <devnull+manivannan.sadhasivam.linaro.org@xxxxxxxxxx>
- [PATCH v2 2/5] PCI/pwrctl: Create pwrctl devices only if at least one power supply is present
- From: Manivannan Sadhasivam via B4 Relay <devnull+manivannan.sadhasivam.linaro.org@xxxxxxxxxx>
- [PATCH v2 3/5] PCI/pwrctl: Ensure that the pwrctl drivers are probed before the PCI client drivers
- From: Manivannan Sadhasivam via B4 Relay <devnull+manivannan.sadhasivam.linaro.org@xxxxxxxxxx>
- [PATCH v2 0/5] PCI/pwrctl: Ensure that the pwrctl drivers are probed before PCI client drivers
- From: Manivannan Sadhasivam via B4 Relay <devnull+manivannan.sadhasivam.linaro.org@xxxxxxxxxx>
- [PATCH v2 1/5] PCI/pwrctl: Use of_platform_device_create() to create pwrctl devices
- From: Manivannan Sadhasivam via B4 Relay <devnull+manivannan.sadhasivam.linaro.org@xxxxxxxxxx>
- [PATCH v2 4/5] PCI/pwrctl: Move pwrctl device creation to its own helper function
- From: Manivannan Sadhasivam via B4 Relay <devnull+manivannan.sadhasivam.linaro.org@xxxxxxxxxx>
- Re: [PATCH] PCI/VGA: Don't assume only VGA device found is the boot VGA device
- From: Kai-Heng Feng <kaihengf@xxxxxxxxxx>
- [pci:for-linus] BUILD SUCCESS ad783b9f8e78572fff3b04b6caee7bea3821eea8
- From: kernel test robot <lkp@xxxxxxxxx>
- RE: [PATCH v4 net-next 03/13] dt-bindings: net: add bindings for NETC blocks control
- From: Wei Fang <wei.fang@xxxxxxx>
- RE: [PATCH v2 1/5] PCI/P2PDMA: Don't enforce ACS check for functions of same device
- From: "Kasireddy, Vivek" <vivek.kasireddy@xxxxxxxxx>
- Re: linux: Goodbye from a Linux community volunteer
- From: Khalil Fazal <spare.khalil@xxxxxxxxx>
- Re: [PATCH v3 00/16] Device / Driver PCI / Platform Rust abstractions
- From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
- RE: [PATCH v5 net-next 10/13] net: enetc: extract enetc_int_vector_init/destroy() from enetc_alloc_msix()
- From: Wei Fang <wei.fang@xxxxxxx>
- RE: [PATCH v5 net-next 08/13] PCI: Add NXP NETC vendor ID and device IDs
- From: Wei Fang <wei.fang@xxxxxxx>
- RE: [PATCH v5 net-next 09/13] net: enetc: add i.MX95 EMDIO support
- From: Wei Fang <wei.fang@xxxxxxx>
- RE: [PATCH v5 net-next 07/13] net: enetc: remove ERR050089 workaround for i.MX95
- From: Wei Fang <wei.fang@xxxxxxx>
- Re: linux: Goodbye from a Linux community volunteer
- From: Oleksiy Protas <elfy.ua@xxxxxxxxx>
- RE: [PATCH v5 net-next 06/13] net: enetc: build enetc_pf_common.c as a separate module
- From: Wei Fang <wei.fang@xxxxxxx>
- RE: [PATCH v5 net-next 05/13] net: enetc: extract common ENETC PF parts for LS1028A and i.MX95 platforms
- From: Wei Fang <wei.fang@xxxxxxx>
- RE: [PATCH v5 net-next 04/13] net: enetc: add initial netc-blk-ctrl driver support
- From: Wei Fang <wei.fang@xxxxxxx>
- Re: [PATCH 1/1] RFC: dt bindings: Add property "brcm,gen3-eq-presets"
- From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
- Re: [PATCH] PCI/ROM: Fix PCI ROM header check bug
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- [PATCH v3 2/2] PCI: imx6: Add IOMMU and ITS MSI support for i.MX95
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v3 1/2] PCI: Add enable_device() and disable_device() callbacks for bridges
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v3 0/2] PCI: add enabe(disable)_device() hook for bridge
- From: Frank Li <Frank.Li@xxxxxxx>
- Re: [PATCH 00/16] AMD NB and SMN rework
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH 00/16] AMD NB and SMN rework
- From: Mario Limonciello <mario.limonciello@xxxxxxx>
- Re: [PATCH 00/16] AMD NB and SMN rework
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH v5 net-next 10/13] net: enetc: extract enetc_int_vector_init/destroy() from enetc_alloc_msix()
- From: Vladimir Oltean <vladimir.oltean@xxxxxxx>
- [PATCH v4 4/4] PCI: imx6: Add i.MX8Q PCIe Endpoint (EP) support
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v4 3/4] PCI: imx6: Pass correct sub mode when calling phy_set_mode_ext()
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v4 2/4] dt-bindings: PCI: fsl,imx6q-pcie-ep: Add compatible string fsl,imx8q-pcie-ep
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v4 1/4] PCI: dwc: ep: Add bus_addr_base for outbound window
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v4 0/4] PCI: ep: dwc/imx6: Add bus address support for PCI endpoint devices
- From: Frank Li <Frank.Li@xxxxxxx>
- Re: [PATCH 00/16] AMD NB and SMN rework
- From: Mario Limonciello <mario.limonciello@xxxxxxx>
- Re: linux: Goodbye from a Linux community volunteer
- From: Dragan Milivojević <d.milivojevic@xxxxxxxxx>
- Re: linux: Goodbye from a Linux community volunteer
- From: Dragan Milivojević <d.milivojevic@xxxxxxxxx>
- Re: linux: Goodbye from a Linux community volunteer
- From: Dragan Milivojević <d.milivojevic@xxxxxxxxx>
- Re: linux: Goodbye from a Linux community volunteer
- From: "Theodore Ts'o" <tytso@xxxxxxx>
- Re: [PATCH 01/15] cxl/aer/pci: Add CXL PCIe port error handler callbacks in AER service driver
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- Re: linux: Goodbye from a Linux community volunteer
- From: Oleksiy Protas <elfy.ua@xxxxxxxxx>
- Re: [PATCH v5 0/2] PCI: microchip: support using either instance 1 or 2
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: linux: Goodbye from a Linux community volunteer
- From: Hantong Chen <cxwdyx620@xxxxxxxxx>
- Re: [PATCH v5 net-next 08/13] PCI: Add NXP NETC vendor ID and device IDs
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- [pci:locking] BUILD SUCCESS ab679834c47572542b8f9f42dd0839aace152fae
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v2 1/5] PCI/P2PDMA: Don't enforce ACS check for functions of same device
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH v5 net-next 09/13] net: enetc: add i.MX95 EMDIO support
- From: Vladimir Oltean <vladimir.oltean@xxxxxxx>
- [pci:bwctrl] BUILD SUCCESS 3df7d1bf0623ace4e77c3ee9395c0060157505ab
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v5 net-next 09/13] net: enetc: add i.MX95 EMDIO support
- From: Vladimir Oltean <vladimir.oltean@xxxxxxx>
- Re: [PATCH v2 1/5] PCI/P2PDMA: Don't enforce ACS check for functions of same device
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: linux: Goodbye from a Linux community volunteer
- From: Andy Shevchenko <andy@xxxxxxxxxx>
[Index of Archives]
[Linux USB Devel]
[Video for Linux]
[Linux SCSI]
[Samba]
[Yosemite News]