Linux PCI

• Thread Index

• [pci:next] BUILD SUCCESS f45ed7dd6ff14ba6220223b6ac77289a9e5a1370
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v7 1/2] PCI: Add enable_device() and disable_device() callbacks for bridges
  • From: Lorenzo Pieralisi <lpieralisi@xxxxxxxxxx>
• Re: [PATCH v7 2/2] PCI: imx6: Add IOMMU and ITS MSI support for i.MX95
  • From: Lorenzo Pieralisi <lpieralisi@xxxxxxxxxx>
• Re: [PATCH v2 3/6] dt-bindings: PCI: qcom: Add IPQ5332 SoC
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 2/6] phy: qcom: Introduce PCIe UNIPHY 28LP driver
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: phy: qcom,uniphy-pcie: Document PCIe uniphy
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4 6/6] PCI: of: Create device-tree PCI host bridge node
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• Re: [PATCH v4 1/6] driver core: Introduce device_{add,remove}_of_node()
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• Re: [PATCH v4 1/6] driver core: Introduce device_{add,remove}_of_node()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v1 2/2] PCI: epf-mhi: Update device id for SA8775P
  • From: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
• [PATCH v1 1/2] bus: mhi: host: pci_generic: Add supoprt for SA8775P target
  • From: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
• [PATCH v1 0/2] pci_generic: Add supoprt for SA8775P target
  • From: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
• Re: [PATCH v5 0/5] Verify devices transition from D3cold to D0
  • From: Mario Limonciello <superm1@xxxxxxxxxx>
• Re: [PATCH v5 0/5] Verify devices transition from D3cold to D0
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• [PATCH v10 7/7] tools: PCI: Add 'B' option for test doorbell
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v10 5/7] PCI: endpoint: pci-epf-test: Add doorbell test support
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v10 6/7] misc: pci_endpoint_test: Add doorbell test case
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v10 4/7] PCI: endpoint: Add pci_epf_align_inbound_addr() helper for address alignment
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v10 2/7] PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v10 3/7] PCI: endpoint: pci-ep-msi: Add MSI address/data pair mutable check
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v10 0/7] PCI: EP: Add RC-to-EP doorbell with platform MSI controller
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v10 1/7] irqchip/gic-v3-its: Avoid overwriting msi_prepare callback if provided by msi_domain_info
  • From: Frank Li <Frank.Li@xxxxxxx>
• Re: [PATCH] resource: harden resource_contains
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v2 4/6] pci: qcom: Add support for IPQ5332
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH] resource: harden resource_contains
  • From: Alison Schofield <alison.schofield@xxxxxxxxx>
• Re: [PATCH v2 2/6] phy: qcom: Introduce PCIe UNIPHY 28LP driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 06/11] irqchip/imx-mu-msi: Convert to msi_create_parent_irq_domain() helper
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH 3/3] PCI: qcom: Enable ECAM feature based on config size
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH 2/3] PCI: dwc: Add ECAM support with iATU configuration
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v1 2/2] serial: 8250_pci: Share WCH IDs with parport_serial driver
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH] PCI: Improve parameter docu for request APIs
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v4 6/6] PCI: of: Create device-tree PCI host bridge node
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v3 15/16] rust: platform: add basic platform device / driver abstractions
  • From: Daniel Almeida <daniel.almeida@xxxxxxxxxxxxx>
• Re: [PATCH v4 1/6] driver core: Introduce device_{add,remove}_of_node()
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v3 1/6] dt-bindings: PCI: Add binding for qps615
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v3 6/6] PCI: pwrctl: Add power control driver for qps615
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v5 0/5] Verify devices transition from D3cold to D0
  • From: Mario Limonciello <superm1@xxxxxxxxxx>
• Re: [PATCH v3 15/16] rust: platform: add basic platform device / driver abstractions
  • From: Danilo Krummrich <dakr@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 5/6] PCI: Add ACS quirk for Wangxun FF5xxx NICs
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.11 10/13] PCI: Add ACS quirk for Wangxun FF5xxx NICs
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.12 09/15] PCI: Add 'reset_subordinate' to reset hierarchy below bridge
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 06/12] PCI: vmd: Set devices to D0 before enabling PM L1 Substates
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: PCI: dwc: Add AMD Versal2 mdb slcr support
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 3/4] PCI: Add ACS quirk for Wangxun FF5xxx NICs
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v5 1/6] PCI: dwc: ep: iATU registers must be written after the BAR_MASK
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 4/6] PCI: Add 'reset_subordinate' to reset hierarchy below bridge
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v5 2/6] PCI: dwc: ep: Add missing checks when dynamically changing a BAR
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19] PCI: Add 'reset_subordinate' to reset hierarchy below bridge
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 3/4] PCI: Add ACS quirk for Wangxun FF5xxx NICs
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 2/4] PCI: Add 'reset_subordinate' to reset hierarchy below bridge
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 2/4] PCI: Add 'reset_subordinate' to reset hierarchy below bridge
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 2/2] PCI: apple: Convert to {en,dis}able_device() callbacks
  • From: Frank Li <Frank.li@xxxxxxx>
• [PATCH AUTOSEL 5.15 5/6] PCI: Add ACS quirk for Wangxun FF5xxx NICs
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 4/6] PCI: Add 'reset_subordinate' to reset hierarchy below bridge
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 3/6] PCI: Detect and trust built-in Thunderbolt chips
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.12 08/15] PCI: starfive: Enable controller runtime PM before probing host bridge
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 3/6] PCI: Detect and trust built-in Thunderbolt chips
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 09/12] PCI: Add ACS quirk for Wangxun FF5xxx NICs
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 08/12] PCI: Add 'reset_subordinate' to reset hierarchy below bridge
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 07/12] PCI: Detect and trust built-in Thunderbolt chips
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 05/12] PCI: vmd: Add DID 8086:B06F and 8086:B60B for Intel client SKUs
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 04/12] PCI: qcom: Add support for IPQ9574
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.11 09/13] PCI: Add 'reset_subordinate' to reset hierarchy below bridge
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.11 08/13] PCI: starfive: Enable controller runtime PM before probing host bridge
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.11 07/13] PCI: Detect and trust built-in Thunderbolt chips
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.11 06/13] PCI: vmd: Set devices to D0 before enabling PM L1 Substates
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.11 05/13] PCI: vmd: Add DID 8086:B06F and 8086:B60B for Intel client SKUs
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.11 04/13] PCI: qcom: Add support for IPQ9574
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.12 10/15] PCI: Add ACS quirk for Wangxun FF5xxx NICs
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.12 07/15] PCI: Detect and trust built-in Thunderbolt chips
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.12 06/15] PCI: vmd: Set devices to D0 before enabling PM L1 Substates
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.12 05/15] PCI: vmd: Add DID 8086:B06F and 8086:B60B for Intel client SKUs
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.12 04/15] PCI: qcom: Add support for IPQ9574
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 1/2] PCI: host-generic: Allow {en,dis}able_device() to be provided via pci_ecam_ops
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v9 1/6] platform-msi: Add msi_remove_device_irq_domain() in platform_device_msi_free_irqs_all()
  • From: Frank Li <Frank.li@xxxxxxx>
• [PATCH 0/2] PCI: Convert the Apple controller to host bridge hooks
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• [PATCH 2/2] PCI: apple: Convert to {en,dis}able_device() callbacks
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• [PATCH 1/2] PCI: host-generic: Allow {en,dis}able_device() to be provided via pci_ecam_ops
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• [pci:constify] BUILD SUCCESS de191a114154a15ede7c97b52531aa439d30eb98
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 02/11] genirq/msi: Add helper for creating MSI-parent irq domains
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH v9 2/6] PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• [PATCH 06/11] irqchip/imx-mu-msi: Convert to msi_create_parent_irq_domain() helper
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• [PATCH 05/11] irqchip/riscv-imsic: Convert to msi_create_parent_irq_domain() helper
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• [PATCH 10/11] PCI: apple: Convert to MSI parent infrastructure
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• [PATCH 00/11] irqchip: MSI parent cleanup and PCI host driver conversion
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• [PATCH 11/11] PCI: xgene: Convert to MSI parent infrastructure
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• [PATCH 09/11] iommu/intel: Convert to msi_create_parent_irq_domain() helper
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• [PATCH 08/11] iommu/amd: Convert to msi_create_parent_irq_domain() helper
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• [PATCH 07/11] irqchip/loongson-pch-msi: Convert to msi_create_parent_irq_domain() helper
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• [PATCH 04/11] irqchip/mvebu: Convert to msi_create_parent_irq_domain() helper
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• [PATCH 03/11] irqchip/gic: Convert to msi_create_parent_irq_domain() helper
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• [PATCH 02/11] genirq/msi: Add helper for creating MSI-parent irq domains
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• [PATCH 01/11] irqchip: Make irq-msi-lib.h globally available
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• [PATCH v2 3/6] dt-bindings: PCI: qcom: Add IPQ5332 SoC
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v3 3/3] PCI: amd-mdb: Add AMD MDB Root Port driver
  • From: Thippeswamy Havalige <thippeswamy.havalige@xxxxxxx>
• [PATCH v3 2/3] dt-bindings: PCI: amd-mdb: Add AMD Versal2 MDB PCIe Root Port Bridge
  • From: Thippeswamy Havalige <thippeswamy.havalige@xxxxxxx>
• [PATCH v3 1/3] dt-bindings: PCI: dwc: Add AMD Versal2 mdb slcr support
  • From: Thippeswamy Havalige <thippeswamy.havalige@xxxxxxx>
• [PATCH v3 0/3] Add support for AMD MDB IP as Root Port
  • From: Thippeswamy Havalige <thippeswamy.havalige@xxxxxxx>
• [PATCH v2 4/6] pci: qcom: Add support for IPQ5332
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v2 6/6] arm64: dts: qcom: ipq5332: Enable PCIe phys and controllers
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v2 5/6] arm64: dts: qcom: ipq5332: Add PCIe related nodes
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v2 2/6] phy: qcom: Introduce PCIe UNIPHY 28LP driver
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v2 1/6] dt-bindings: phy: qcom,uniphy-pcie: Document PCIe uniphy
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v2 0/6] Add PCIe support for Qualcomm IPQ5332
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH v1 2/2] serial: 8250_pci: Share WCH IDs with parport_serial driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] PCI: Improve parameter docu for request APIs
  • From: Philipp Stanner <pstanner@xxxxxxxxxx>
• Re: [PATCH v3 1/6] dt-bindings: PCI: Add binding for qps615
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH v1 2/2] serial: 8250_pci: Share WCH IDs with parport_serial driver
  • From: Jiri Slaby <jirislaby@xxxxxxxxxx>
• Re: [PATCH v3] PCI/sysfs: Change read permissions for VPD attributes
  • From: Leon Romanovsky <leon@xxxxxxxxxx>
• RE: [PATCH v2 1/2] dt-bindings: PCI: amd-mdb: Add AMD Versal2 MDB PCIe Root Port Bridge
  • From: "Havalige, Thippeswamy" <thippeswamy.havalige@xxxxxxx>
• Re: [PATCH v2] PCI: Use downstream bridges for distributing resources
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v1 1/2] serial: 8250_pci: Resolve WCH vendor ID ambiguity
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 2/2] serial: 8250_pci: Share WCH IDs with parport_serial driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 0/2] serial: 8250_pci: Share WCH IDs
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] PCI: qcom: Enable ECAM feature based on config size
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH v2] PCI: Use downstream bridges for distributing resources
  • From: Kai-Heng Feng <kaihengf@xxxxxxxxxx>
• Re: [PATCH 3/3] PCI: qcom: Enable ECAM feature based on config size
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH 2/3] PCI: dwc: Add ECAM support with iATU configuration
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH 2/3] PCI: dwc: Add ECAM support with iATU configuration
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH 1/3] arm64: dts: qcom: sc7280: Increase config size to 256MB for ECAM feature
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH] PCI/pwrctl: Do not assume device node presence
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: drivers/pci: (and/or KVM): Slow PCI initialization during VM boot with passthrough of large BAR Nvidia GPUs on DGX H100
  • From: Alex Williamson <alex.williamson@xxxxxxxxxx>
• [PATCH v7 2/2] PCI: imx6: Add IOMMU and ITS MSI support for i.MX95
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v7 1/2] PCI: Add enable_device() and disable_device() callbacks for bridges
  • From: Frank Li <Frank.Li@xxxxxxx>
• Re: [PATCH v9 2/6] PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
  • From: Frank Li <Frank.li@xxxxxxx>
• [PATCH v7 0/2] PCI: add enabe(disable)_device() hook for bridge
  • From: Frank Li <Frank.Li@xxxxxxx>
• Re: [PATCH v9 1/6] platform-msi: Add msi_remove_device_irq_domain() in platform_device_msi_free_irqs_all()
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: drivers/pci: (and/or KVM): Slow PCI initialization during VM boot with passthrough of large BAR Nvidia GPUs on DGX H100
  • From: Mitchell Augustin <mitchell.augustin@xxxxxxxxxxxxx>
• Re: [PATCH v5 1/2] PCI: Add enable_device() and disable_device() callbacks for bridges
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v9 1/6] platform-msi: Add msi_remove_device_irq_domain() in platform_device_msi_free_irqs_all()
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: PCI: Add STM32MP25 PCIe root complex bindings
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH 0/4] PCI: Constify 'struct bin_attribute'
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH] PCI: Improve parameter docu for request APIs
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v9 2/6] PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: drivers/pci: (and/or KVM): Slow PCI initialization during VM boot with passthrough of large BAR Nvidia GPUs on DGX H100
  • From: Alex Williamson <alex.williamson@xxxxxxxxxx>
• [PATCH v9 4/6] PCI: endpoint: pci-epf-test: Add doorbell test support
  • From: Frank Li <Frank.Li@xxxxxxx>
• Re: [PATCH v9 1/6] platform-msi: Add msi_remove_device_irq_domain() in platform_device_msi_free_irqs_all()
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v5 1/2] PCI: Add enable_device() and disable_device() callbacks for bridges
  • From: Frank Li <Frank.li@xxxxxxx>
• [PATCH v9 6/6] tools: PCI: Add 'B' option for test doorbell
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v9 5/6] misc: pci_endpoint_test: Add doorbell test case
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v9 3/6] PCI: endpoint: Add pci_epf_align_inbound_addr() helper for address alignment
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v9 2/6] PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v9 1/6] platform-msi: Add msi_remove_device_irq_domain() in platform_device_msi_free_irqs_all()
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v9 0/6] PCI: EP: Add RC-to-EP doorbell with platform MSI controller
  • From: Frank Li <Frank.Li@xxxxxxx>
• Re: [PATCH v3] PCI/sysfs: Change read permissions for VPD attributes
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: drivers/pci: (and/or KVM): Slow PCI initialization during VM boot with passthrough of large BAR Nvidia GPUs on DGX H100
  • From: Mitchell Augustin <mitchell.augustin@xxxxxxxxxxxxx>
• Re: drivers/pci: (and/or KVM): Slow PCI initialization during VM boot with passthrough of large BAR Nvidia GPUs on DGX H100
  • From: Alex Williamson <alex.williamson@xxxxxxxxxx>
• Re: [PATCH 3/3] PCI: qcom: Enable ECAM feature based on config size
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: drivers/pci: (and/or KVM): Slow PCI initialization during VM boot with passthrough of large BAR Nvidia GPUs on DGX H100
  • From: Mitchell Augustin <mitchell.augustin@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] PCI: dwc: Add ECAM support with iATU configuration
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v3] PCI/sysfs: Change read permissions for VPD attributes
  • From: Leon Romanovsky <leon@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: PCI: amd-mdb: Add AMD Versal2 MDB PCIe Root Port Bridge
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3] PCI/sysfs: Change read permissions for VPD attributes
  • From: Stephen Hemminger <stephen@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: PCI: Add STM32MP25 PCIe root complex bindings
  • From: Christian Bruel <christian.bruel@xxxxxxxxxxx>
• Re: [PATCH v2 4/5] PCI: stm32: Add PCIe endpoint support for STM32MP25
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 09/10] sysfs: bin_attribute: add const read/write callback variants
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 09/10] sysfs: bin_attribute: add const read/write callback variants
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/5] dt-bindings: PCI: Add STM32MP25 PCIe endpoint bindings
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 2/5] PCI: stm32: Add PCIe host support for STM32MP25
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: PCI: Add STM32MP25 PCIe root complex bindings
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: PCI: amd-mdb: Add AMD Versal2 MDB PCIe Root Port Bridge
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH v2 2/2] PCI: amd-mdb: Add AMD MDB Root Port driver
  • From: Thippeswamy Havalige <thippeswamy.havalige@xxxxxxx>
• [PATCH v2 1/2] dt-bindings: PCI: amd-mdb: Add AMD Versal2 MDB PCIe Root Port Bridge
  • From: Thippeswamy Havalige <thippeswamy.havalige@xxxxxxx>
• [PATCH v2 0/2] Add support for AMD MDB IP as Root Port
  • From: Thippeswamy Havalige <thippeswamy.havalige@xxxxxxx>
• [PATCH v3] PCI/sysfs: Change read permissions for VPD attributes
  • From: Leon Romanovsky <leon@xxxxxxxxxx>
• [PATCH] PCI: Improve parameter docu for request APIs
  • From: Philipp Stanner <pstanner@xxxxxxxxxx>
• Re: [PATCH v3 07/16] rust: add `Revocable` type
  • From: Alice Ryhl <aliceryhl@xxxxxxxxxx>
• Re: [PATCH v3 07/16] rust: add `Revocable` type
  • From: Alice Ryhl <aliceryhl@xxxxxxxxxx>
• Re: [PATCH v3 07/16] rust: add `Revocable` type
  • From: Danilo Krummrich <dakr@xxxxxxxxxx>
• Re: [PATCH v3 07/16] rust: add `Revocable` type
  • From: Danilo Krummrich <dakr@xxxxxxxxxx>
• Re: Deadlock during PCIe hot remove and SPDK exit
  • From: fengnan chang <fengnanchang@xxxxxxxxx>
• Re: [PATCH v3 1/6] dt-bindings: PCI: Add binding for qps615
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH v3 2/2] misc: pci_endpoint_test: Add support for capabilities
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• [PATCH v3 0/2] PCI endpoint test: Add support for capabilities
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• [PATCH v3 1/2] PCI: endpoint: pci-epf-test: Add support for capabilities
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH] PCI: Use downstream bridges for distributing resources
  • From: "Chia-Lin Kao (AceLan)" <acelan.kao@xxxxxxxxxxxxx>
• Re: Deadlock during PCIe hot remove and SPDK exit
  • From: Yi Liu <yi.l.liu@xxxxxxxxx>
• Re: [PATCH v2 2/2] misc: pci_endpoint_test: Add support for capabilities
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH v2 1/2] PCI: endpoint: pci-epf-test: Add support for capabilities
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH 3/4] PCI/P2PDMA: Constify 'struct bin_attribute'
  • From: Logan Gunthorpe <logang@xxxxxxxxxxxx>
• [PATCH 0/4] PCI: Constify 'struct bin_attribute'
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• Re: drivers/pci: (and/or KVM): Slow PCI initialization during VM boot with passthrough of large BAR Nvidia GPUs on DGX H100
  • From: Mitchell Augustin <mitchell.augustin@xxxxxxxxxxxxx>
• [PATCH 4/4] PCI/ACPI: Constify 'struct bin_attribute'
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• [PATCH 1/4] PCI/sysfs: Constify 'struct bin_attribute'
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• [PATCH 2/4] PCI/VPD: Constify 'struct bin_attribute'
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• [PATCH 3/4] PCI/P2PDMA: Constify 'struct bin_attribute'
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/4] PCI: qcom-ep: Mark BAR0/BAR2 as 64bit BARs and BAR1/BAR3 as RESERVED
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH 3/3] PCI: qcom: Enable ECAM feature based on config size
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 2/3] PCI: dwc: Add ECAM support with iATU configuration
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v4 5/6] of: Add #address-cells/#size-cells in the device-tree root empty node
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v11 3/3] PCI: rockchip: Refactor rockchip_pcie_disable_clocks() function signature
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• [PATCH v6 3/8] virtio: hookup irq_get_affinity callback
  • From: Daniel Wagner <wagi@xxxxxxxxxx>
• [PATCH v11 1/3] PCI: rockchip: Simplify clock handling by using clk_bulk*() function
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: [PATCH 1/3] arm64: dts: qcom: sc7280: Increase config size to 256MB for ECAM feature
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v11 2/3] PCI: rockchip: Simplify reset control handling by using reset_control_bulk*() function
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: [PATCH v5 4/8] blk-mq: introduce blk_mq_map_hw_queues
  • From: Daniel Wagner <dwagner@xxxxxxx>
• Re: DWC PCIe endpoint iATU vs BAR MASK ordering
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v6 7/8] virtio: blk/scsi: replace blk_mq_virtio_map_queues with blk_mq_map_hw_queues
  • From: Daniel Wagner <wagi@xxxxxxxxxx>
• [PATCH v6 8/8] blk-mq: remove unused queue mapping helpers
  • From: Daniel Wagner <wagi@xxxxxxxxxx>
• [PATCH v6 6/8] nvme: replace blk_mq_pci_map_queues with blk_mq_map_hw_queues
  • From: Daniel Wagner <wagi@xxxxxxxxxx>
• [PATCH v6 5/8] scsi: replace blk_mq_pci_map_queues with blk_mq_map_hw_queues
  • From: Daniel Wagner <wagi@xxxxxxxxxx>
• [PATCH v6 4/8] blk-mq: introduce blk_mq_map_hw_queues
  • From: Daniel Wagner <wagi@xxxxxxxxxx>
• [PATCH v6 2/8] PCI: hookup irq_get_affinity callback
  • From: Daniel Wagner <wagi@xxxxxxxxxx>
• [PATCH v6 1/8] driver core: bus: add irq_get_affinity callback to bus_type
  • From: Daniel Wagner <wagi@xxxxxxxxxx>
• [PATCH v6 0/8] blk: refactor queue affinity helpers
  • From: Daniel Wagner <wagi@xxxxxxxxxx>
• Re: [PATCH] PCI: check bridge->bus in pci_host_common_remove
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v4 5/6] of: Add #address-cells/#size-cells in the device-tree root empty node
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• [PATCH v4 6/6] PCI: of: Create device-tree PCI host bridge node
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• [PATCH v4 4/6] PCI: of_property: Constify parameter in of_pci_get_addr_flags()
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• [PATCH v4 3/6] PCI: of_property: Add support for NULL pdev in of_pci_set_address()
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• [PATCH v4 1/6] driver core: Introduce device_{add,remove}_of_node()
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• [PATCH v4 2/6] PCI: of: Use device_{add,remove}_of_node() to attach of_node to existing device
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• [PATCH v4 0/6] Add support for the PCI host bridge device-tree node creation.
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• Re: [PATCH v2 1/4] PCI: qcom-ep: Mark BAR0/BAR2 as 64bit BARs and BAR1/BAR3 as RESERVED
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v5 00/10] Add support for RaspberryPi RP1 PCI device using a DT overlay
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v5 10/10] arm64: defconfig: Enable RP1 misc/clock/gpio drivers
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v5 09/10] arm64: dts: bcm2712: Add external clock for RP1 chipset on Rpi5
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v5 08/10] misc: rp1: RaspberryPi RP1 misc driver
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v5 05/10] clk: rp1: Add support for clocks provided by RP1
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v5 06/10] pinctrl: rp1: Implement RaspberryPi RP1 gpio support
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v5 07/10] arm64: dts: rp1: Add support for RaspberryPi's RP1 device
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v5 04/10] dt-bindings: misc: Add device specific bindings for RaspberryPi RP1
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v5 01/10] dt-bindings: clock: Add RaspberryPi RP1 clock bindings
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v5 03/10] dt-bindings: pci: Add common schema for devices accessible through PCI BARs
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v5 02/10] dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• Re: [ANNOUNCE][CFP] Power Management and Scheduling in the Linux Kernel VII edition (OSPM-summit 2025)
  • From: Juri Lelli <juri.lelli@xxxxxxxxxx>
• Re: [PATCH] PCI: check bridge->bus in pci_host_common_remove
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v2] PCI: rockchip-ep: Fix error code in rockchip_pcie_ep_init_ob_mem()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• RE: [PATCH 1/2] dt-bindings: PCI: amd-mdb: Add YAML schemas for AMD Versal2 MDB PCIe Root Port Bridge
  • From: "Havalige, Thippeswamy" <thippeswamy.havalige@xxxxxxx>
• RE: [PATCH 2/2] PCI: amd-mdb: Add AMD MDB Root Port driver
  • From: "Havalige, Thippeswamy" <thippeswamy.havalige@xxxxxxx>
• Re: [PATCH v2 0/8] MT8188 DT and binding fixes
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• Re: Deadlock during PCIe hot remove and SPDK exit
  • From: fengnan chang <fengnanchang@xxxxxxxxx>
• Re: [PATCH 2/5] PCI: sg2042: Add Sophgo SG2042 PCIe driver
  • From: Chen Wang <unicorn_wang@xxxxxxxxxxx>
• Re: [PATCH 6.13] PCI/pwrctrl: Skip NULL of_node when unregistering
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH 6.13] PCI/pwrctrl: Skip NULL of_node when unregistering
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH 6.13] PCI/pwrctrl: Skip NULL of_node when unregistering
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 6.13] PCI/pwrctrl: Skip NULL of_node when unregistering
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [pci:for-linus] BUILD SUCCESS 5c8418cf4025388bedd4d65ada993f7d3786cc3a
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [GIT PULL] PCI fixes for v6.13
  • From: pr-tracker-bot@xxxxxxxxxx
• [GIT PULL] PCI fixes for v6.13
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH 6.13] PCI/pwrctrl: Skip NULL of_node when unregistering
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v2 1/4] PCI: qcom-ep: Mark BAR0/BAR2 as 64bit BARs and BAR1/BAR3 as RESERVED
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] arm64: dts: qcom: x1e80100: Add PCIe lane equalization preset properties
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH next] PCI: rockchip-ep: Fix error code in rockchip_pcie_ep_init_ob_mem()
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH next] PCI: rockchip-ep: Fix error code in rockchip_pcie_ep_init_ob_mem()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v5 2/6] PCI: dwc: ep: Add missing checks when dynamically changing a BAR
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v5 1/6] PCI: dwc: ep: iATU registers must be written after the BAR_MASK
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 2/2] misc: pci_endpoint_test: Add support for capabilities
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 1/2] PCI: endpoint: pci-epf-test: Add support for capabilities
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 0/2] PCI endpoint test: Add support for capabilities
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v5 6/6] PCI: mediatek-gen3: rely on msleep() in mtk_pcie_en7581_power_up()
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH v5 5/6] PCI: mediatek-gen3: Add reset delay in mtk_pcie_en7581_power_up()
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH v5 4/6] PCI: mediatek-gen3: Add comment about initialization order in mtk_pcie_en7581_power_up()
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH v5 3/6] PCI: mediatek-gen3: Move reset/assert callbacks in .power_up()
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH v5 2/6] PCI: mediatek-gen3: rely on clk_bulk_prepare_enable() in mtk_pcie_en7581_power_up()
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH v5 1/6] PCI: mediatek-gen3: Add missing reset_control_deassert() for mac_rst in mtk_pcie_en7581_power_up()
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH v5 0/6] PCI: mediatek-gen3: mtk_pcie_en7581_power_up() code refactoring
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v2 2/5] PCI: stm32: Add PCIe host support for STM32MP25
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/5] PCI: stm32: Add PCIe host support for STM32MP25
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH 2/2] PCI: amd-mdb: Add AMD MDB Root Port driver
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v2 1/4] PCI: qcom-ep: Mark BAR0/BAR2 as 64bit BARs and BAR1/BAR3 as RESERVED
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH 2/5] PCI: sg2042: Add Sophgo SG2042 PCIe driver
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v2 0/8] pci: qcom: Add QCS8300 PCIe support
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v2 0/8] pci: qcom: Add QCS8300 PCIe support
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH 6.13] PCI/pwrctrl: Skip NULL of_node when unregistering
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v2 4/8] PCI: qcom: Add QCS8300 PCIe support
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v2 4/4] selftests: pci_endpoint: Migrate to Kselftest framework
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v4 08/10] misc: rp1: RaspberryPi RP1 misc driver
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• Re: [PATCH v4 02/10] dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• Re: [PATCH v9 1/6] misc: Add support for LAN966x PCI device
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• Re: [PATCH v2 4/4] selftests: pci_endpoint: Migrate to Kselftest framework
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH v4 02/10] dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• Re: [PATCH v2 4/4] selftests: pci_endpoint: Migrate to Kselftest framework
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 4/4] selftests: pci_endpoint: Migrate to Kselftest framework
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH] PCI/pwrctrl: Check the device node exist before device removal
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 4/4] selftests: pci_endpoint: Migrate to Kselftest framework
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 2/4] misc: pci_endpoint_test: Fix the return value of IOCTL
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v4 08/10] misc: rp1: RaspberryPi RP1 misc driver
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• Re: [PATCH v2 1/4] PCI: qcom-ep: Mark BAR0/BAR2 as 64bit BARs and BAR1/BAR3 as RESERVED
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] PCI/pwrctrl: Check the device node exist before device removal
  • From: Saurabh Sengar <ssengar@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] selftests: pci_endpoint: Migrate to Kselftest framework
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH v2 2/4] misc: pci_endpoint_test: Fix the return value of IOCTL
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH v9 1/6] misc: Add support for LAN966x PCI device
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 2/5] PCI: sg2042: Add Sophgo SG2042 PCIe driver
  • From: Chen Wang <unicorn_wang@xxxxxxxxxxx>
• [PATCH v2 4/4] selftests: pci_endpoint: Migrate to Kselftest framework
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v2 3/4] selftests: Move PCI Endpoint tests from tools/pci to Kselftests
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v2 2/4] misc: pci_endpoint_test: Fix the return value of IOCTL
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v2 1/4] PCI: qcom-ep: Mark BAR0/BAR2 as 64bit BARs and BAR1/BAR3 as RESERVED
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v2 0/4] Migrate PCI Endpoint Subsystem tests to Kselftest
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v9 1/6] misc: Add support for LAN966x PCI device
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• [PATCH] resource: harden resource_contains
  • From: <alucerop@xxxxxxx>
• Re: [PATCH v9 1/6] misc: Add support for LAN966x PCI device
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v9 1/6] misc: Add support for LAN966x PCI device
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• Re: [PATCH v9 1/6] misc: Add support for LAN966x PCI device
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v9 1/6] misc: Add support for LAN966x PCI device
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• Re: Deadlock during PCIe hot remove and SPDK exit
  • From: Yi Liu <yi.l.liu@xxxxxxxxx>
• [PATCH] PCI: remove already resolved TODO
  • From: guilherme giacomo simoes <trintaeoitogc@xxxxxxxxx>
• Re: [PATCH v9 1/6] misc: Add support for LAN966x PCI device
  • From: Michal Kubecek <mkubecek@xxxxxxx>
• Re: [PATCH v3 1/6] dt-bindings: PCI: Add binding for qps615
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 1/6] dt-bindings: PCI: Add binding for qps615
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH RFCv1 0/7] vfio: Allow userspace to specify the address for each MSI vector
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH] PCI: Use downstream bridges for distributing resources
  • From: Kai-Heng Feng <kaihengf@xxxxxxxxxx>
• Re: [PATCH] PCI: Use downstream bridges for distributing resources
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH] PCI: Use downstream bridges for distributing resources
  • From: Kai-Heng Feng <kaihengf@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: PCI: amd-mdb: Add YAML schemas for AMD Versal2 MDB PCIe Root Port Bridge
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: Deadlock during PCIe hot remove and SPDK exit
  • From: fengnan chang <fengnanchang@xxxxxxxxx>
• Re: [PATCH v3 06/15] PCI/AER: Change AER driver to read UCE fatal status for all CXL PCIe port devices
  • From: "Bowman, Terry" <terry.bowman@xxxxxxx>
• Re: [PATCH v3 05/15] PCI/AER: Add CXL PCIe port correctable error support in AER service driver
  • From: "Bowman, Terry" <terry.bowman@xxxxxxx>
• Re: [PATCH] PCI: check bridge->bus in pci_host_common_remove
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 6.13] PCI/pwrctrl: Skip NULL of_node when unregistering
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: drivers/pci: (and/or KVM): Slow PCI initialization during VM boot with passthrough of large BAR Nvidia GPUs on DGX H100
  • From: Alex Williamson <alex.williamson@xxxxxxxxxx>
• Re: [PATCH v3 06/15] PCI/AER: Change AER driver to read UCE fatal status for all CXL PCIe port devices
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 05/15] PCI/AER: Add CXL PCIe port correctable error support in AER service driver
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 3/5] dt-bindings: PCI: Add STM32MP25 PCIe endpoint bindings
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v2 3/5] dt-bindings: PCI: Add STM32MP25 PCIe endpoint bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] PCI: dw-rockchip: Enumerate endpoints based on dll_link_up irq in the combined sys irq
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: PCI: Add STM32MP25 PCIe root complex bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 0/2] Preserve the flags portion on 1:1 dma-ranges mapping
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 10/16] rust: add devres abstraction
  • From: Alice Ryhl <aliceryhl@xxxxxxxxxx>
• Re: [PATCH v3 10/16] rust: add devres abstraction
  • From: Danilo Krummrich <dakr@xxxxxxxxxx>
• Re: [PATCH v3 10/16] rust: add devres abstraction
  • From: Alice Ryhl <aliceryhl@xxxxxxxxxx>
• [PATCH 2/2] PCI: amd-mdb: Add AMD MDB Root Port driver
  • From: Thippeswamy Havalige <thippeswamy.havalige@xxxxxxx>
• [PATCH 1/2] dt-bindings: PCI: amd-mdb: Add YAML schemas for AMD Versal2 MDB PCIe Root Port Bridge
  • From: Thippeswamy Havalige <thippeswamy.havalige@xxxxxxx>
• [PATCH 0/2] Add support for AMD MDB IP as Root Port
  • From: Thippeswamy Havalige <thippeswamy.havalige@xxxxxxx>
• Re: [PATCH v2 0/2] PCI endpoint test: Add support for capabilities
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH v2 0/2] PCI endpoint test: Add support for capabilities
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH v2 0/2] PCI endpoint test: Add support for capabilities
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH v2 0/2] PCI endpoint test: Add support for capabilities
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH] PCI/ASPM: Save downstream port L1ss control when saving for upstream
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• [PATCH v5 3/6] PCI: dwc: ep: Add 'address' alignment to 'size' check in dw_pcie_prog_ep_inbound_atu()
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• [PATCH v5 2/6] PCI: dwc: ep: Add missing checks when dynamically changing a BAR
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• [PATCH v5 4/6] PCI: artpec6: Implement dw_pcie_ep operation get_features
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• [PATCH v5 6/6] PCI: endpoint: Verify that requested BAR size is a power of two
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• [PATCH v5 5/6] PCI: endpoint: Add size check for fixed size BARs in pci_epc_set_bar()
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• [PATCH v5 1/6] PCI: dwc: ep: iATU registers must be written after the BAR_MASK
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• [PATCH v5 0/6] PCI endpoint additional pci_epc_set_bar() checks
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH v8 4/6] PCI: endpoint: pci-epf-test: Add doorbell test support
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: PCI: qcom,pcie-sm8550: document 'global' interrupt
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4 02/10] dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4 01/10] dt-bindings: clock: Add RaspberryPi RP1 clock bindings
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4 5/5] PCI: endpoint: Verify that requested BAR size is a power of two
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v4 4/5] PCI: endpoint: Add size check for fixed size BARs in pci_epc_set_bar()
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v4 3/5] PCI: artpec6: Implement dw_pcie_ep operation get_features
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v4 2/5] PCI: dwc: ep: Add 'address' alignment to 'size' check in dw_pcie_prog_ep_inbound_atu()
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: Deadlock during PCIe hot remove and SPDK exit
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v4 1/5] PCI: dwc: ep: iATU registers must be written after the BAR_MASK
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Deadlock during PCIe hot remove and SPDK exit
  • From: fengnan chang <fengnanchang@xxxxxxxxx>
• Re: [PATCH v8 2/6] PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v5] PCI: Allow PCI bridges to go to D3Hot on all Devicetree based platforms
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v5] PCI: dwc: Clean up some unnecessary codes in dw_pcie_suspend_noirq()
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 6.13] PCI/pwrctrl: Skip NULL of_node when unregistering
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH] nvme-pci: Shutdown the device if D3Cold is allowed by the user
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH] PCI/ASPM: Save downstream port L1ss control when saving for upstream
  • From: Ajay Agarwal <ajayagarwal@xxxxxxxxxx>
• Re: [GIT PULL] PCI changes for v6.13
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH 2/4] PCI: of: Add API to retrieve equalization presets from device tree
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH 1/4] arm64: dts: qcom: x1e80100: Add PCIe lane equalization preset properties
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: drivers/pci: (and/or KVM): Slow PCI initialization during VM boot with passthrough of large BAR Nvidia GPUs on DGX H100
  • From: Mitchell Augustin <mitchell.augustin@xxxxxxxxxxxxx>
• Re: drivers/pci: (and/or KVM): Slow PCI initialization during VM boot with passthrough of large BAR Nvidia GPUs on DGX H100
  • From: Alex Williamson <alex.williamson@xxxxxxxxxx>
• [PATCH v5] PCI: Allow PCI bridges to go to D3Hot on all Devicetree based platforms
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• Re: drivers/pci: (and/or KVM): Slow PCI initialization during VM boot with passthrough of large BAR Nvidia GPUs on DGX H100
  • From: Mitchell Augustin <mitchell.augustin@xxxxxxxxxxxxx>
• Re: drivers/pci: (and/or KVM): Slow PCI initialization during VM boot with passthrough of large BAR Nvidia GPUs on DGX H100
  • From: Alex Williamson <alex.williamson@xxxxxxxxxx>
• Re: drivers/pci: (and/or KVM): Slow PCI initialization during VM boot with passthrough of large BAR Nvidia GPUs on DGX H100
  • From: Mitchell Augustin <mitchell.augustin@xxxxxxxxxxxxx>
• [PATCH 6.13] PCI/pwrctrl: Skip NULL of_node when unregistering
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• Re: [PATCH v3 15/16] rust: platform: add basic platform device / driver abstractions
  • From: Danilo Krummrich <dakr@xxxxxxxxxx>
• Re: [PATCH v3 15/16] rust: platform: add basic platform device / driver abstractions
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5] PCI: dwc: Clean up some unnecessary codes in dw_pcie_suspend_noirq()
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: drivers/pci: (and/or KVM): Slow PCI initialization during VM boot with passthrough of large BAR Nvidia GPUs on DGX H100
  • From: Alex Williamson <alex.williamson@xxxxxxxxxx>
• Re: [PATCH v3 5/5] hyperv: Remove the now unused hyperv-tlfs.h files
  • From: Nuno Das Neves <nunodasneves@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 2/6] PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH] nvme-pci: Shutdown the device if D3Cold is allowed by the user
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v8 4/6] PCI: endpoint: pci-epf-test: Add doorbell test support
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v8 4/6] PCI: endpoint: pci-epf-test: Add doorbell test support
  • From: Frank Li <Frank.li@xxxxxxx>
• [PATCH v2 3/5] dt-bindings: PCI: Add STM32MP25 PCIe endpoint bindings
  • From: Christian Bruel <christian.bruel@xxxxxxxxxxx>
• [PATCH v2 4/5] PCI: stm32: Add PCIe endpoint support for STM32MP25
  • From: Christian Bruel <christian.bruel@xxxxxxxxxxx>
• [PATCH v2 5/5] MAINTAINERS: add entry for ST STM32MP25 PCIe drivers
  • From: Christian Bruel <christian.bruel@xxxxxxxxxxx>
• [PATCH v2 0/5] Add STM32MP25 PCIe drivers
  • From: Christian Bruel <christian.bruel@xxxxxxxxxxx>
• [PATCH v2 2/5] PCI: stm32: Add PCIe host support for STM32MP25
  • From: Christian Bruel <christian.bruel@xxxxxxxxxxx>
• [PATCH v2 1/5] dt-bindings: PCI: Add STM32MP25 PCIe root complex bindings
  • From: Christian Bruel <christian.bruel@xxxxxxxxxxx>
• Re: [PATCH v3 15/16] rust: platform: add basic platform device / driver abstractions
  • From: Danilo Krummrich <dakr@xxxxxxxxxx>
• Re: [PATCH v4 04/10] dt-bindings: misc: Add device specific bindings for RaspberryPi RP1
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• Re: [PATCH v3 15/16] rust: platform: add basic platform device / driver abstractions
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v1 1/5] dt-bindings: PCI: Add STM32MP25 PCIe root complex bindings
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v3 15/16] rust: platform: add basic platform device / driver abstractions
  • From: Danilo Krummrich <dakr@xxxxxxxxxx>
• Re: [PATCH v3 11/16] rust: pci: add basic PCI device / driver abstractions
  • From: Danilo Krummrich <dakr@xxxxxxxxxx>
• [pci:next] BUILD SUCCESS 10099266dec8275a6899e6a27dcdfebbcc726cc7
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 0/2] PCI endpoint test: Add support for capabilities
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v1 0/5] Add STM32MP25 PCIe drivers
  • From: Christian Bruel <christian.bruel@xxxxxxxxxxx>
• [PATCH v1 5/5] MAINTAINERS: add entry for ST STM32MP25 PCIe drivers
  • From: Christian Bruel <christian.bruel@xxxxxxxxxxx>
• [PATCH v1 1/5] dt-bindings: PCI: Add STM32MP25 PCIe root complex bindings
  • From: Christian Bruel <christian.bruel@xxxxxxxxxxx>
• [PATCH v1 2/5] PCI: stm32: Add PCIe host support for STM32MP25
  • From: Christian Bruel <christian.bruel@xxxxxxxxxxx>
• [PATCH v1 3/5] dt-bindings: PCI: Add STM32MP25 PCIe endpoint bindings
  • From: Christian Bruel <christian.bruel@xxxxxxxxxxx>
• [PATCH v1 4/5] PCI: stm32: Add PCIe endpoint support for STM32MP25
  • From: Christian Bruel <christian.bruel@xxxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: sm8650: Add 'global' interrupt to the PCIe RC nodes
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: sm8550: Add 'global' interrupt to the PCIe RC nodes
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: PCI: qcom,pcie-sm8550: document 'global' interrupt
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v8 4/6] PCI: endpoint: pci-epf-test: Add doorbell test support
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v3 15/16] rust: platform: add basic platform device / driver abstractions
  • From: Danilo Krummrich <dakr@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: sm8650: Add 'global' interrupt to the PCIe RC nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: sm8550: Add 'global' interrupt to the PCIe RC nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• RE: [PATCH v3 0/3] Add support for RAS DES feature in PCIe DW
  • From: "Shradha Todi" <shradha.t@xxxxxxxxxxx>
• Re: [PATCH v8 3/6] PCI: endpoint: Add pci_epf_align_addr() helper for address alignment
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• [PATCH 1/3] dt-bindings: PCI: qcom,pcie-sm8550: document 'global' interrupt
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 3/3] arm64: dts: qcom: sm8650: Add 'global' interrupt to the PCIe RC nodes
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 2/3] arm64: dts: qcom: sm8550: Add 'global' interrupt to the PCIe RC nodes
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 0/3] PCI: qcom-sm8[56]50: document and add 'global' interrupt
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v8 4/6] PCI: endpoint: pci-epf-test: Add doorbell test support
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH v8 3/6] PCI: endpoint: Add pci_epf_align_addr() helper for address alignment
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• [pci:controller/rockchip] BUILD SUCCESS a7137cbf6bd53a9f9c40c64fc8b12b88289b3d4a
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v7 10/10] arm64: dts: imx95: Add ref clock for i.MX95 PCIe
  • From: Richard Zhu <hongxing.zhu@xxxxxxx>
• [PATCH v7 09/10] PCI: imx6: Add i.MX8MQ i.MX8Q and i.MX95 PM support
  • From: Richard Zhu <hongxing.zhu@xxxxxxx>
• [PATCH v7 08/10] PCI: imx6: Use dwc common suspend resume method
  • From: Richard Zhu <hongxing.zhu@xxxxxxx>
• [PATCH v7 07/10] PCI: imx6: Remove imx7d_pcie_init_phy() function
  • From: Richard Zhu <hongxing.zhu@xxxxxxx>
• [PATCH v7 06/10] PCI: imx6: Fix the missing reference clock disable logic
  • From: Richard Zhu <hongxing.zhu@xxxxxxx>
• [PATCH v7 05/10] PCI: imx6: Deassert apps_reset in imx_pcie_deassert_core_reset()
  • From: Richard Zhu <hongxing.zhu@xxxxxxx>
• [PATCH v7 04/10] PCI: imx6: Correct controller_id generation logic for i.MX7D
  • From: Richard Zhu <hongxing.zhu@xxxxxxx>
• [PATCH v7 03/10] PCI: imx6: Fetch dbi2 and iATU base addesses from DT
  • From: Richard Zhu <hongxing.zhu@xxxxxxx>
• [PATCH v7 02/10] PCI: imx6: Add ref clock for i.MX95 PCIe
  • From: Richard Zhu <hongxing.zhu@xxxxxxx>
• [PATCH v7 01/10] dt-bindings: imx6q-pcie: Add ref clock for i.MX95 PCIe RC
  • From: Richard Zhu <hongxing.zhu@xxxxxxx>
• [PATCH v7 0/10] A bunch of changes to refine i.MX PCIe driver
  • From: Richard Zhu <hongxing.zhu@xxxxxxx>
• [PATCH v5] PCI: dwc: Clean up some unnecessary codes in dw_pcie_suspend_noirq()
  • From: Richard Zhu <hongxing.zhu@xxxxxxx>
• Re: [PATCH v3 0/3] Add support for RAS DES feature in PCIe DW
  • From: Nitesh Gupta <quic_nitegupt@xxxxxxxxxxx>
• Re: [PATCH v3 1/6] dt-bindings: PCI: Add binding for qps615
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 1/6] dt-bindings: PCI: Add binding for qps615
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• RE: [PATCH v3 5/5] hyperv: Remove the now unused hyperv-tlfs.h files
  • From: Michael Kelley <mhklinux@xxxxxxxxxxx>
• RE: [PATCH v3 4/5] hyperv: Switch from hyperv-tlfs.h to hyperv/hvhdk.h
  • From: Michael Kelley <mhklinux@xxxxxxxxxxx>
• RE: [PATCH v3 3/5] hyperv: Add new Hyper-V headers in include/hyperv
  • From: Michael Kelley <mhklinux@xxxxxxxxxxx>
• Re: [PATCH v3 0/3] Add support for RAS DES feature in PCIe DW
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH v3 0/3] Add support for RAS DES feature in PCIe DW
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH v8 4/6] PCI: endpoint: pci-epf-test: Add doorbell test support
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v8 3/6] PCI: endpoint: Add pci_epf_align_addr() helper for address alignment
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v8 2/6] PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v2] x86: fix missing declaration of x86_apple_machine
  • From: Zhang Kunbo <zhangkunbo@xxxxxxxxxx>
• [PATCH v2] x86: fix missing declaration of x86_apple_machine
  • From: Zhang Kunbo <zhangkunbo@xxxxxxxxxx>
• [PATCH v3 5/5] hyperv: Remove the now unused hyperv-tlfs.h files
  • From: Nuno Das Neves <nunodasneves@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 3/5] hyperv: Add new Hyper-V headers in include/hyperv
  • From: Nuno Das Neves <nunodasneves@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 4/5] hyperv: Switch from hyperv-tlfs.h to hyperv/hvhdk.h
  • From: Nuno Das Neves <nunodasneves@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 0/5] Introduce new headers for Hyper-V
  • From: Nuno Das Neves <nunodasneves@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 2/5] hyperv: Clean up unnecessary #includes
  • From: Nuno Das Neves <nunodasneves@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 1/5] hyperv: Move hv_connection_id to hyperv-tlfs.h
  • From: Nuno Das Neves <nunodasneves@xxxxxxxxxxxxxxxxxxx>
• drivers/pci: (and/or KVM): Slow PCI initialization during VM boot with passthrough of large BAR Nvidia GPUs on DGX H100
  • From: Mitchell Augustin <mitchell.augustin@xxxxxxxxxxxxx>
• [GIT PULL] PCI changes for v6.13
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v2 2/2] PCI/AER: Report fatal errors of RCiEP and EP if link recoverd
  • From: "Bowman, Terry" <terry.bowman@xxxxxxx>
• Re: [PATCH v6 1/2] PCI: Add enable_device() and disable_device() callbacks for bridges
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v8 3/6] PCI: endpoint: Add pci_epf_align_addr() helper for address alignment
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v8 5/6] misc: pci_endpoint_test: Add doorbell test case
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v8 4/6] PCI: endpoint: pci-epf-test: Add doorbell test support
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v4 06/10] pinctrl: rp1: Implement RaspberryPi RP1 gpio support
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• Re: [PATCH v4 10/10] arm64: defconfig: Enable RP1 misc/clock/gpio drivers
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• Re: [PATCH v4 08/10] misc: rp1: RaspberryPi RP1 misc driver
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• Re: [PATCH v4 02/10] dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• Re: [PATCH v8 2/6] PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH 4/5] PCI: stm32: Add PCIe endpoint support for STM32MP25
  • From: Christian Bruel <christian.bruel@xxxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: PCI: Add STM32MP25 PCIe root complex bindings
  • From: Christian Bruel <christian.bruel@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] misc: pci_endpoint_test: Add support for capabilities
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH 2/5] PCI: stm32: Add PCIe host support for STM32MP25
  • From: Christian Bruel <christian.bruel@xxxxxxxxxxx>
• [PATCH] x86: fix missing declartion of x86_apple_machine
  • From: Zhang Kunbo <zhangkunbo@xxxxxxxxxx>
• Re: [PATCH v4 08/10] misc: rp1: RaspberryPi RP1 misc driver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 05/16] rust: implement `IdArray`, `IdTable` and `RawDeviceId`
  • From: Miguel Ojeda <miguel.ojeda.sandonis@xxxxxxxxx>
• Re: [PATCH v4 04/10] dt-bindings: misc: Add device specific bindings for RaspberryPi RP1
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 04/10] dt-bindings: misc: Add device specific bindings for RaspberryPi RP1
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• Re: [PATCH v4 00/10] Add support for RaspberryPi RP1 PCI device using a DT overlay
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• Re: [PATCH v4 09/10] arm64: dts: bcm2712: Add external clock for RP1 chipset on Rpi5
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• RE: [PATCH v6 08/10] PCI: imx6: Use dwc common suspend resume method
  • From: Hongxing Zhu <hongxing.zhu@xxxxxxx>
• Re: [PATCH v4 08/10] misc: rp1: RaspberryPi RP1 misc driver
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• Re: [PATCH v3 1/6] dt-bindings: PCI: Add binding for qps615
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 2/2] PCI/AER: Report fatal errors of RCiEP and EP if link recoverd
  • From: Shuai Xue <xueshuai@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 04/10] dt-bindings: misc: Add device specific bindings for RaspberryPi RP1
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v4 09/10] arm64: dts: bcm2712: Add external clock for RP1 chipset on Rpi5
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v4 08/10] misc: rp1: RaspberryPi RP1 misc driver
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v4 00/10] Add support for RaspberryPi RP1 PCI device using a DT overlay
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v8 2/7] PCI: dwc: Use devicetree 'ranges' property to get rid of cpu_addr_fixup() callback
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v8 2/6] PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH v3 05/16] rust: implement `IdArray`, `IdTable` and `RawDeviceId`
  • From: Sasha Finkelstein <fnkl.kernel@xxxxxxxxx>
• Re: [PATCH v8 0/7] PCI: dwc: opitimaze RC Host/EP pci_fixup_addr()
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v8 5/6] misc: pci_endpoint_test: Add doorbell test case
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v8 2/6] PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v4 10/10] arm64: defconfig: Enable RP1 misc/clock/gpio drivers
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v4 09/10] arm64: dts: bcm2712: Add external clock for RP1 chipset on Rpi5
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v4 08/10] misc: rp1: RaspberryPi RP1 misc driver
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v4 07/10] arm64: dts: rp1: Add support for RaspberryPi's RP1 device
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v4 06/10] pinctrl: rp1: Implement RaspberryPi RP1 gpio support
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v4 05/10] clk: rp1: Add support for clocks provided by RP1
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v4 04/10] dt-bindings: misc: Add device specific bindings for RaspberryPi RP1
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v4 03/10] dt-bindings: pci: Add common schema for devices accessible through PCI BARs
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v4 02/10] dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v4 01/10] dt-bindings: clock: Add RaspberryPi RP1 clock bindings
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v4 00/10] Add support for RaspberryPi RP1 PCI device using a DT overlay
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v2 2/2] of: address: Preserve the flags portion on 1:1 dma-ranges mapping
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v2 1/2] of/unittest: Add empty dma-ranges address translation tests
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v2 0/2] Preserve the flags portion on 1:1 dma-ranges mapping
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• Re: [PATCH v8 2/6] PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH v8 4/6] PCI: endpoint: pci-epf-test: Add doorbell test support
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v8 3/6] PCI: endpoint: Add pci_epf_align_addr() helper for address alignment
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v8 2/6] PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH] misc: pci_endpoint_test: Add consecutive BAR test
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v3 5/6] PCI: qcom: Add support for host_stop_link() & host_start_link()
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH v3 1/6] dt-bindings: PCI: Add binding for qps615
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH v3 1/6] dt-bindings: PCI: Add binding for qps615
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [RFC 3/6] lib: rspdm: Initial commit of Rust SPDM
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• [PATCH v4] PCI: hotplug: Add a generic RAS tracepoint for hotplug event
  • From: Shuai Xue <xueshuai@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 5/6] PCI: mediatek-gen3: Add reset delay in mtk_pcie_en7581_power_up()
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v4 6/6] PCI: mediatek-gen3: rely on msleep() in mtk_pcie_en7581_power_up()
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v4 5/6] PCI: mediatek-gen3: Add reset delay in mtk_pcie_en7581_power_up()
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v4 3/6] PCI: mediatek-gen3: Move reset/assert callbacks in .power_up()
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v4 2/6] PCI: mediatek-gen3: rely on clk_bulk_prepare_enable() in mtk_pcie_en7581_power_up()
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH] nvme-pci: Shutdown the device if D3Cold is allowed by the user
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH] nvme-pci: Shutdown the device if D3Cold is allowed by the user
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v2] PCI/sysfs: Change read permissions for VPD attributes
  • From: Leon Romanovsky <leon@xxxxxxxxxx>
• [PATCH v5 3/3] PCI: qcom: Update ICC and OPP values during link up event
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH v5 2/3] PCI: qcom: Set use_linkup_irq if global IRQ handler is present
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH v5 1/3] PCI: dwc: Skip waiting for link up if vendor drivers can detect Link up event
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH v5 0/3] PCI: dwc: Skip waiting for link up if vendor drivers can detect Link up event
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• Re: [RFC 2/6] drivers: pci: Change CONFIG_SPDM to a dependency
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [RFC 3/6] lib: rspdm: Initial commit of Rust SPDM
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [RFC 2/6] drivers: pci: Change CONFIG_SPDM to a dependency
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v6 10/10] arm64: dts: imx95: Add ref clock for i.MX95 PCIe
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v6 04/10] PCI: imx6: Correct controller_id generation logic for i.MX7D
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v6 03/10] PCI: imx6: Fetch dbi2 and iATU base addesses from DT
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v6 05/10] PCI: imx6: Make core reset assertion deassertion symmetric
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v6 08/10] PCI: imx6: Use dwc common suspend resume method
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v6 08/10] PCI: imx6: Use dwc common suspend resume method
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v6 02/10] PCI: imx6: Add ref clock for i.MX95 PCIe
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [RFC 2/6] drivers: pci: Change CONFIG_SPDM to a dependency
  • From: Miguel Ojeda <miguel.ojeda.sandonis@xxxxxxxxx>
• Re: [RFC 2/6] drivers: pci: Change CONFIG_SPDM to a dependency
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: DWC PCIe endpoint iATU vs BAR MASK ordering
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: DWC PCIe endpoint iATU vs BAR MASK ordering
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• [PATCH v4 5/5] PCI: endpoint: Verify that requested BAR size is a power of two
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• [PATCH v4 4/5] PCI: endpoint: Add size check for fixed size BARs in pci_epc_set_bar()
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• [PATCH v4 3/5] PCI: artpec6: Implement dw_pcie_ep operation get_features
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• [PATCH v4 2/5] PCI: dwc: ep: Add 'address' alignment to 'size' check in dw_pcie_prog_ep_inbound_atu()
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• [PATCH v4 1/5] PCI: dwc: ep: iATU registers must be written after the BAR_MASK
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• [PATCH v4 0/5] PCI endpoint additional pci_epc_set_bar() checks
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH v3] PCI: hotplug: Add a generic RAS tracepoint for hotplug event
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• [pci:next] BUILD SUCCESS 0f3d0b32cf72a0de47f15cf22ba2738cd51170c3
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v3 8/8] PCI: vmd: Add workaround for bus number hardwired to fixed non-zero value
  • From: Szymon Durawa <szymon.durawa@xxxxxxxxxxxxxxx>
• [PATCH v3 7/8] PCI: vmd: Add support for second rootbus under VMD
  • From: Szymon Durawa <szymon.durawa@xxxxxxxxxxxxxxx>
• [PATCH v3 6/8] PCI: vmd: Convert bus and busn_start to an array
  • From: Szymon Durawa <szymon.durawa@xxxxxxxxxxxxxxx>
• [PATCH v3 5/8] PCI: vmd: Replace hardcoded values with enum and defines
  • From: Szymon Durawa <szymon.durawa@xxxxxxxxxxxxxxx>
• [PATCH v3 4/8] PCI: vmd: Add vmd_create_bus()
  • From: Szymon Durawa <szymon.durawa@xxxxxxxxxxxxxxx>
• [PATCH v3 2/8] PCI: vmd: Add vmd_configure_cfgbar()
  • From: Szymon Durawa <szymon.durawa@xxxxxxxxxxxxxxx>
• [PATCH v3 3/8] PCI: vmd: Add vmd_configure_membar() and vmd_configure_membar1_membar2()
  • From: Szymon Durawa <szymon.durawa@xxxxxxxxxxxxxxx>
• [PATCH v3 1/8] PCI: vmd: Add vmd_bus_enumeration()
  • From: Szymon Durawa <szymon.durawa@xxxxxxxxxxxxxxx>
• [PATCH v3 0/8] VMD add second rootbus support
  • From: Szymon Durawa <szymon.durawa@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] PCI: hotplug: Add a generic RAS tracepoint for hotplug event
  • From: Shuai Xue <xueshuai@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] PCI: hotplug: Add a generic RAS tracepoint for hotplug event
  • From: Shuai Xue <xueshuai@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] PCI: hotplug: Add a generic RAS tracepoint for hotplug event
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [PATCH v3] PCI: hotplug: Add a generic RAS tracepoint for hotplug event
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v3 2/6] arm64: dts: qcom: qcs6490-rb3gen2: Add node for qps615
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] PCI/sysfs: Change read permissions for VPD attributes
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v3 15/15] PCI/AER: Enable internal errors for CXL upstream and downstream switch ports
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v3 15/15] PCI/AER: Enable internal errors for CXL upstream and downstream switch ports
  • From: "Bowman, Terry" <terry.bowman@xxxxxxx>
• Re: [PATCH 2/3] PCI: dwc: Add ECAM support with iATU configuration
  • From: kernel test robot <lkp@xxxxxxxxx>
• [pci:misc] BUILD SUCCESS d9db393f2b9ed674f965dd823c1692b41bad7bfb
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 06/15] PCI/AER: Change AER driver to read UCE fatal status for all CXL PCIe port devices
  • From: "Bowman, Terry" <terry.bowman@xxxxxxx>
• Re: [PATCH v2 3/5] PCI/pwrctl: Ensure that the pwrctl drivers are probed before the PCI client drivers
  • From: Krzysztof Wilczyński <kw@xxxxxxxxx>
• Re: [PATCH v2 2/2] misc: pci_endpoint_test: Add support for capabilities
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v2 1/2] PCI: endpoint: pci-epf-test: Add support for capabilities
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v5 3/4] PCI: Decouple D3Hot and D3Cold handling for bridges
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• Re: [PATCH v5 4/4] PCI: Allow PCI bridges to go to D3Hot on all Devicetree based platforms
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• Re: [PATCH v2 3/5] PCI/pwrctl: Ensure that the pwrctl drivers are probed before the PCI client drivers
  • From: Krzysztof Wilczyński <kw@xxxxxxxxx>
• Re: [PATCH v2] PCI/sysfs: Change read permissions for VPD attributes
  • From: Leon Romanovsky <leon@xxxxxxxxxx>
• Re: next-20241121: arm64: of_pci_supply_present (drivers/pci/of.c:746) - Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [syzbot] [pci?] linux-next test error: general protection fault in of_pci_supply_present
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH] PCI/pwrctl: Do not assume device node presence
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v2 2/5] PCI/pwrctl: Create pwrctl devices only if at least one power supply is present
  • From: Krzysztof Wilczyński <kw@xxxxxxxxx>
• [PATCH v2 1/2] PCI: endpoint: pci-epf-test: Add support for capabilities
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• [PATCH v2 2/2] misc: pci_endpoint_test: Add support for capabilities
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• [PATCH v2 0/2] PCI endpoint test: Add support for capabilities
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH v3] ACPI: PCI: check if the root io space is page aligned
  • From: Miao Wang <shankerwangmiao@xxxxxxxxx>
• next-20241121: arm64: of_pci_supply_present (drivers/pci/of.c:746) - Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058
  • From: Naresh Kamboju <naresh.kamboju@xxxxxxxxxx>
• Re: [PATCH v2] PCI/sysfs: Change read permissions for VPD attributes
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [syzbot] [pci?] linux-next test error: general protection fault in of_pci_supply_present
  • From: syzbot <syzbot+0058f72ff908dfa2dbf5@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] PCI: hotplug: Add a generic RAS tracepoint for hotplug event
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [PATCH 2/3] PCI: dwc: Add ECAM support with iATU configuration
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/2] misc: pci_endpoint_test: Add support for capabilities
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH v2] PCI/sysfs: Change read permissions for VPD attributes
  • From: Leon Romanovsky <leon@xxxxxxxxxx>
• Re: [PATCH 2/2] misc: pci_endpoint_test: Add support for capabilities
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH] PCI/pwrctl: Do not assume device node presence
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2] PCI/sysfs: Change read permissions for VPD attributes
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v2 3/5] PCI/pwrctl: Ensure that the pwrctl drivers are probed before the PCI client drivers
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v3] PCI: hotplug: Add a generic RAS tracepoint for hotplug event
  • From: Shuai Xue <xueshuai@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] PCI/pwrctl: Do not assume device node presence
  • From: Klara Modin <klarasmodin@xxxxxxxxx>
• Re: [PATCH 1/2] PCI/MSI: Add MSIX option to write to ENTRY_DATA before any reads
  • From: Paolo Abeni <pabeni@xxxxxxxxxx>
• Re: [PATCH] PCI/pwrctl: Do not assume device node presence
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 1/2] PCI/MSI: Add MSIX option to write to ENTRY_DATA before any reads
  • From: Dullfire <dullfire@xxxxxxxxx>
• Re: [PATCH v5 3/8] virtio: hookup irq_get_affinity callback
  • From: Daniel Wagner <dwagner@xxxxxxx>
• [PATCH] PCI/pwrctl: Do not assume device node presence
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• Re: [PATCH v3] PCI: hotplug: Add a generic RAS tracepoint for hotplug event
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v5 8/8] blk-mq: remove unused queue mapping helpers
  • From: John Garry <john.g.garry@xxxxxxxxxx>
• Re: [PATCH v5 7/8] virtio: blk/scsi: replace blk_mq_virtio_map_queues with blk_mq_map_hw_queues
  • From: John Garry <john.g.garry@xxxxxxxxxx>
• Re: [PATCH v5 6/8] nvme: replace blk_mq_pci_map_queues with blk_mq_map_hw_queues
  • From: John Garry <john.g.garry@xxxxxxxxxx>
• Re: [PATCH v5 5/8] scsi: replace blk_mq_pci_map_queues with blk_mq_map_hw_queues
  • From: John Garry <john.g.garry@xxxxxxxxxx>
• Re: [PATCH v5 4/8] blk-mq: introduce blk_mq_map_hw_queues
  • From: John Garry <john.g.garry@xxxxxxxxxx>
• Re: [PATCH v5 3/8] virtio: hookup irq_get_affinity callback
  • From: John Garry <john.g.garry@xxxxxxxxxx>
• Re: [PATCH v5 2/8] PCI: hookup irq_get_affinity callback
  • From: John Garry <john.g.garry@xxxxxxxxxx>
• Re: [PATCH 1/2] PCI/MSI: Add MSIX option to write to ENTRY_DATA before any reads
  • From: Paolo Abeni <pabeni@xxxxxxxxxx>
• Re: [PATCH v2 2/5] PCI/pwrctl: Create pwrctl devices only if at least one power supply is present
  • From: Klara Modin <klarasmodin@xxxxxxxxx>
• Re: [pci:controller/rockchip] BUILD SUCCESS 592aac418ebdf451fe9b146bc2ca6dfc96921af0
  • From: Philip Li <philip.li@xxxxxxxxx>
• Re: [pci:controller/rockchip] BUILD SUCCESS 592aac418ebdf451fe9b146bc2ca6dfc96921af0
  • From: Philip Li <philip.li@xxxxxxxxx>
• Re: [PATCH v5 8/8] blk-mq: remove unused queue mapping helpers
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH v5 7/8] virtio: blk/scsi: replace blk_mq_virtio_map_queues with blk_mq_map_hw_queues
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH v5 6/8] nvme: replace blk_mq_pci_map_queues with blk_mq_map_hw_queues
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH v5 5/8] scsi: replace blk_mq_pci_map_queues with blk_mq_map_hw_queues
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH v5 4/8] blk-mq: introduce blk_mq_map_hw_queues
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [pci:controller/rockchip] BUILD SUCCESS 592aac418ebdf451fe9b146bc2ca6dfc96921af0
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH 2/2] misc: pci_endpoint_test: Add support for capabilities
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH v5 5/8] scsi: replace blk_mq_pci_map_queues with blk_mq_map_hw_queues
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 11/15] PCI: don't include 'pm_wakeup.h' directly
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH] PCI/pwrctrl: Create device link only if both platform device and supplies are present
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v2 0/8] VMD add second rootbus support
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH] tools: PCI: Fix several incorrect format specifiers
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v2 3/5] PCI/pwrctl: Ensure that the pwrctl drivers are probed before the PCI client drivers
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: DWC PCIe endpoint iATU vs BAR MASK ordering
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH 2/2] misc: pci_endpoint_test: Add support for capabilities
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH 2/2] misc: pci_endpoint_test: Add support for capabilities
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH 2/2] misc: pci_endpoint_test: Add support for capabilities
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v2 3/5] PCI/pwrctl: Ensure that the pwrctl drivers are probed before the PCI client drivers
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 0/2] PCI endpoint test: Add support for capabilities
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH 2/2] misc: pci_endpoint_test: Add support for capabilities
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v2 3/5] PCI/pwrctl: Ensure that the pwrctl drivers are probed before the PCI client drivers
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• [PATCH 2/2] misc: pci_endpoint_test: Add support for capabilities
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• [PATCH 1/2] PCI: endpoint: pci-epf-test: Add support for capabilities
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH v9 7/9] PCI/bwctrl: Add API to set PCIe Link Speed
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 6/6] PCI: pwrctl: Add power control driver for qps615
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• Re: [PATCH v3] PCI: dwc: Clean up some unnecessary codes in dw_pcie_suspend_noirq()
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH RFCv1 0/7] vfio: Allow userspace to specify the address for each MSI vector
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• Re: [PATCH v3 2/6] arm64: dts: qcom: qcs6490-rb3gen2: Add node for qps615
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH RFCv1 0/7] vfio: Allow userspace to specify the address for each MSI vector
  • From: Eric Auger <eric.auger@xxxxxxxxxx>
• [PATCH v3] PCI: hotplug: Add a generic RAS tracepoint for hotplug event
  • From: Shuai Xue <xueshuai@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/6] arm64: dts: qcom: qcs6490-rb3gen2: Add node for qps615
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 0/8] VMD add second rootbus support
  • From: Mariusz Tkaczyk <mariusz.tkaczyk@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/6] arm64: dts: qcom: qcs6490-rb3gen2: Add node for qps615
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 1/6] dt-bindings: PCI: Add binding for qps615
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH] PCI/pwrctrl: Create device link only if both platform device and supplies are present
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• RE: [PATCH v3] PCI: dwc: Clean up some unnecessary codes in dw_pcie_suspend_noirq()
  • From: Hongxing Zhu <hongxing.zhu@xxxxxxx>
• Re: [PATCH v4 5/6] PCI: mediatek-gen3: Add reset delay in mtk_pcie_en7581_power_up()
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• [PATCH v8 7/7] PCI: imx6: Add i.MX8Q PCIe Endpoint (EP) support
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v8 6/7] PCI: imx6: Pass correct sub mode when calling phy_set_mode_ext()
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v8 5/7] dt-bindings: PCI: fsl,imx6q-pcie-ep: Add compatible string fsl,imx8q-pcie-ep
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v8 4/7] PCI: imx6: Remove cpu_addr_fixup()
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v8 3/7] PCI: dwc: ep: Add bus_addr_base for outbound window
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v8 2/7] PCI: dwc: Use devicetree 'ranges' property to get rid of cpu_addr_fixup() callback
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v8 1/7] of: address: Add parent_bus_addr to struct of_pci_range
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v8 0/7] PCI: dwc: opitimaze RC Host/EP pci_fixup_addr()
  • From: Frank Li <Frank.Li@xxxxxxx>
• Re: [PATCH] PCI: check bridge->bus in pci_host_common_remove
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [Bug 219513] New: PCIe drivers do not bind
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [Bug 219513] New: PCIe drivers do not bind
  • From: Dullfire <dullfire@xxxxxxxxx>
• Re: [PATCH v3] PCI: dwc: Clean up some unnecessary codes in dw_pcie_suspend_noirq()
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [Bug 219513] New: PCIe drivers do not bind
  • From: Dullfire <dullfire@xxxxxxxxx>
• Re: [pci:controller/rockchip] BUILD SUCCESS 592aac418ebdf451fe9b146bc2ca6dfc96921af0
  • From: Krzysztof Wilczyński <kwilczynski@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: PCI: snps,dw-pcie: Drop "#interrupt-cells" from example
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3] PCI: mediatek-gen3: Avoid PCIe resetting via PCIE_RSTB for Airoha EN7581 SoC
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [Bug 219513] New: PCIe drivers do not bind
  • From: Dullfire <dullfire@xxxxxxxxx>
• Re: [PATCH] dt-bindings: PCI: snps,dw-pcie: Drop "#interrupt-cells" from example
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v3 07/17] dma-mapping: Implement link/unlink ranges API
  • From: Jason Gunthorpe <jgg@xxxxxxxx>
• Re: [PATCH v3 0/4] Add Qualcomm SA8255p based firmware managed PCIe root complex
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v3 4/4] PCI: qcom: Add Qualcomm SA8255p based PCIe root complex functionality
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: PCI: snps,dw-pcie: Drop "#interrupt-cells" from example
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [pci:controller/rockchip] BUILD SUCCESS 592aac418ebdf451fe9b146bc2ca6dfc96921af0
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [Bug 219513] New: PCIe drivers do not bind
  • From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
• Re: [Bug 219513] New: PCIe drivers do not bind
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v3 07/17] dma-mapping: Implement link/unlink ranges API
  • From: Leon Romanovsky <leon@xxxxxxxxxx>
• [pci:pwrctl] BUILD SUCCESS 3055f91478b6d65a98b0e73009e096c131834e58
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 08/15] cxl/pci: Map CXL PCIe root port and downstream switch port RAS registers
  • From: "Bowman, Terry" <terry.bowman@xxxxxxx>
• Re: [PATCH v3 07/15] PCI/AER: Add CXL PCIe port uncorrectable error recovery in AER service driver
  • From: "Bowman, Terry" <terry.bowman@xxxxxxx>
• Re: [PATCH v3 03/15] cxl/pci: Introduce PCIe helper functions pcie_is_cxl() and pcie_is_cxl_port()
  • From: "Bowman, Terry" <terry.bowman@xxxxxxx>