The entering of L23 lower-power state is optional, because the
connected endpoint might doesn't support it. So pcie-brcmstb shouldn't
print an error if it fails.
Signed-off-by: Stefan Wahren <wahrenst@xxxxxxx>
---
drivers/pci/controller/pcie-brcmstb.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index e733a27dc8df..9e7c5349c6c2 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -1399,7 +1399,10 @@ static void brcm_pcie_remove_bus(struct pci_bus *bus)
pcie->sr = NULL;
}
-/* L23 is a low-power PCIe link state */
+/*
+ * Try to enter L23 ( low-power PCIe link state )
+ * This might fail if connected endpoint doesn't support it.
+ */
static void brcm_pcie_enter_l23(struct brcm_pcie *pcie)
{
void __iomem *base = pcie->base;
@@ -1422,7 +1425,7 @@ static void brcm_pcie_enter_l23(struct brcm_pcie *pcie)
}
if (!l23)
- dev_err(pcie->dev, "failed to enter low-power link state\n");
+ dev_dbg(pcie->dev, "Unable to enter low-power link state\n");
}
static int brcm_phy_cntl(struct brcm_pcie *pcie, const int start)
--
2.34.1
