[+to Rafael, +cc linux-pm] On Sun, Dec 08, 2024 at 03:41:47PM +0800, Kai-Heng Feng wrote: > Some laptops wake up after poweroff when HP Thunderbolt Dock G4 is > connected. > > The following error message can be found during shutdown: > pcieport 0000:00:1d.0: AER: Correctable error message received from 0000:09:04.0 > pcieport 0000:09:04.0: PCIe Bus Error: severity=Correctable, type=Data Link Layer, (Receiver ID) > pcieport 0000:09:04.0: device [8086:0b26] error status/mask=00000080/00002000 > pcieport 0000:09:04.0: [ 7] BadDLLP > > Calling aer_remove() during shutdown can quiesce the error message, > however the spurious wakeup still happens. aer_remove() disables AER interrupts, so I guess there must be a non-AER interrupt being generated during shutdown? If so, AER is a red herring and including the AER details above is a distraction from whatever the real interrupt cause is. > The issue won't happen if the device is in D3 before system shutdown, so > putting device to low power state before shutdown to solve the issue. > > ACPI Spec 6.5, "7.4.2.5 System \_S4 State" says "Devices states are > compatible with the current Power Resource states. In other words, all > devices are in the D3 state when the system state is S4." > > The following "7.4.2.6 System \_S5 State (Soft Off)" states "The S5 > state is similar to the S4 state except that OSPM does not save any > context." so it's safe to assume devices should be at D3 for S5. > > Link: https://bugzilla.kernel.org/show_bug.cgi?id=219036 > Cc: AceLan Kao <acelan.kao@xxxxxxxxxxxxx> > Reviewed-by: Mario Limonciello <mario.limonciello@xxxxxxx> > Tested-by: Mario Limonciello <mario.limonciello@xxxxxxx> > Signed-off-by: Kai-Heng Feng <kaihengf@xxxxxxxxxx> > --- > drivers/pci/pci-driver.c | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c > index 35270172c833..248e0c9fd161 100644 > --- a/drivers/pci/pci-driver.c > +++ b/drivers/pci/pci-driver.c > @@ -510,6 +510,14 @@ static void pci_device_shutdown(struct device *dev) > if (drv && drv->shutdown) > drv->shutdown(pci_dev); > > + /* > + * If driver already changed device's power state, it can mean the > + * wakeup setting is in place, or a workaround is used. Hence keep it > + * as is. > + */ > + if (!kexec_in_progress && pci_dev->current_state == PCI_D0) > + pci_prepare_to_sleep(pci_dev); I don't know enough to draw inferences about PCI_D0 meaning a wakeup setting is in place or a workaround being used. That doesn't seem like enough to be useful for me to maintain this in the future. But my power management understanding is pretty meager. Would like an ack from Rafael for this. > /* > * If this is a kexec reboot, turn off Bus Master bit on the > * device to tell it to not continue to do DMA. Don't touch > -- > 2.47.0 >
