On the Qualcomm AR2 Gen1 platform the second PCIe host can be used
either as an RC or as an EP device. Add device node for the PCIe EP.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sar2130p.dtsi | 61 ++++++++++++++++++++++++++++++++++
1 file changed, 61 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sar2130p.dtsi b/arch/arm64/boot/dts/qcom/sar2130p.dtsi
index dd832e6816be85817fd1ecc853f8d4c800826bc4..b45e9e2ae0357bd0c7d719eaf4fc1faa1cf913f2 100644
--- a/arch/arm64/boot/dts/qcom/sar2130p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sar2130p.dtsi
@@ -1474,6 +1474,67 @@ pcie@0 {
};
};
+ pcie1_ep: pcie-ep@1c08000 {
+ compatible = "qcom,sar2130p-pcie-ep";
+ reg = <0x0 0x01c08000 0x0 0x3000>,
+ <0x0 0x40000000 0x0 0xf1d>,
+ <0x0 0x40000f20 0x0 0xa8>,
+ <0x0 0x40001000 0x0 0x1000>,
+ <0x0 0x40200000 0x0 0x1000000>,
+ <0x0 0x01c0b000 0x0 0x1000>,
+ <0x0 0x40002000 0x0 0x2000>;
+ reg-names = "parf",
+ "dbi",
+ "elbi",
+ "atu",
+ "addr_space",
+ "mmio",
+ "dma";
+
+ clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+ <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_DDRSS_PCIE_SF_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>,
+ <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>,
+ <&gcc GCC_QMIP_PCIE_AHB_CLK>;
+ clock-names = "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "ddrss_sf_tbu",
+ "aggre_noc_axi",
+ "cnoc_sf_axi",
+ "qmip_pcie_ahb";
+
+ interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global",
+ "doorbell",
+ "dma";
+
+ interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_PCIE_1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+ interconnect-names = "pcie-mem",
+ "cpu-pcie";
+ iommus = <&apps_smmu 0x1e00 0x1>;
+ resets = <&gcc GCC_PCIE_1_BCR>;
+ reset-names = "core";
+ power-domains = <&gcc PCIE_1_GDSC>;
+ phys = <&pcie1_phy>;
+ phy-names = "pciephy";
+
+ num-lanes = <2>;
+
+ status = "disabled";
+ };
+
pcie1_phy: phy@1c0e000 {
compatible = "qcom,sar2130p-qmp-gen3x2-pcie-phy";
reg = <0x0 0x01c0e000 0x0 0x2000>;
--
2.39.5
