Linux MMC Development

• Thread Index

• Re: [PATCH V2 2/2] mmc: mmci: Move ios_handler functionality into the driver
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 0/3] mmc: Signal voltage switch procedure for UHS mode (sdhci)
  • From: Kevin Liu <keyuan.liu@xxxxxxxxx>
• Re: [PATCH 3/3] mmc: sdhci: update signal voltage switch code
  • From: Johan Rudholm <jrudholm@xxxxxxxxx>
• [PATCH V2 2/2] mmc: mmci: Move ios_handler functionality into the driver
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxxxxxx>
• [PATCH 1/2] mmc: mmci: Convert to use mmc_regulator_get_supply
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxxxxxx>
• [PATCH 0/2] mmc: mmci: Update regulator support
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] mmc: core: enhance the code for signal voltage setting
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 2/3] mmc: core: cycle power the card in voltage switch rather than mmc_sd_get_cid
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 1/3] mmc: core: enhance the code for signal voltage setting
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 0/3] mmc: Signal voltage switch procedure for UHS mode (sdhci)
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 3/3] mmc: core: Fixup signal voltage switch
  • From: Johan Rudholm <jrudholm@xxxxxxxxx>
• Re: [PATCH 3/3] mmc: core: Fixup signal voltage switch
  • From: Kevin Liu <keyuan.liu@xxxxxxxxx>
• [PATCH 3/3] mmc: sdhci: update signal voltage switch code
  • From: Kevin Liu <kliu5@xxxxxxxxxxx>
• [PATCH 2/3] mmc: core: cycle power the card in voltage switch rather than mmc_sd_get_cid
  • From: Kevin Liu <kliu5@xxxxxxxxxxx>
• [PATCH 0/3] mmc: Signal voltage switch procedure for UHS mode (sdhci)
  • From: Kevin Liu <kliu5@xxxxxxxxxxx>
• [PATCH 1/3] mmc: core: enhance the code for signal voltage setting
  • From: Kevin Liu <kliu5@xxxxxxxxxxx>
• Re: [PATCH 3/3] mmc: core: Fixup signal voltage switch
  • From: Johan Rudholm <jrudholm@xxxxxxxxx>
• Re: [PATCH 0/3] Signal voltage switch procedure for UHS mode
  • From: Johan Rudholm <jrudholm@xxxxxxxxx>
• RE: [PATCH 0/3] Signal voltage switch procedure for UHS mode
  • From: "Shen, Jackey" <Jackey.Shen@xxxxxxx>
• RE: [mmc:mmc-next 45/63] of_iommu.c:(.text+0x114dbc): undefined reference to `__aeabi_uldivmod'
  • From: Zhang Haijun-B42677 <B42677@xxxxxxxxxxxxx>
• Re: [PATCH] mmc: dw_mmc: add support for use_hold_reg
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• [PATCH] mmc: dw_mmc: add support for use_hold_reg
  • From: <dinguyen@xxxxxxxxxx>
• [PATCH] [ARM] pxamci: Refactor regulator support
  • From: dromede@xxxxxxxxx
• Re: FW: [PATCH] mmc: mmci: Gate the clock in runtime suspend to save power
  • From: Kevin Liu <keyuan.liu@xxxxxxxxx>
• Re: [PATCH] mmc: mmci: Fixup and cleanup code for DMA handling
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: FW: [PATCH] mmc: mmci: Gate the clock in runtime suspend to save power
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v3] mmc: core: Add support for idle time BKOPS
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: FW: [PATCH] mmc: mmci: Gate the clock in runtime suspend to save power
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: FW: [PATCH] mmc: mmci: Gate the clock in runtime suspend to save power
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: FW: [PATCH] mmc: mmci: Gate the clock in runtime suspend to save power
  • From: Kevin Liu <keyuan.liu@xxxxxxxxx>
• Re: FW: [PATCH] mmc: mmci: Gate the clock in runtime suspend to save power
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: FW: [PATCH] mmc: mmci: Gate the clock in runtime suspend to save power
  • From: Kevin Liu <keyuan.liu@xxxxxxxxx>
• Re: [PATCH] mmc: mmci: Gate the clock when freq is 0
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] mmc: mmci: Gate the clock in runtime suspend to save power
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: FW: [PATCH] mmc: mmci: Gate the clock in runtime suspend to save power
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] mmc: mmci: Gate the clock when freq is 0
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxxxxxx>
• [PATCH] mmc: mmci: Support for DDR mode
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxxxxxx>
• [PATCH/RFC] mmc: sh-mmcif: simplify IRQ processing
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• [PATCH 14/14] mmc: sh-mmcif: report all errors
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• [PATCH 02/14] mmc: sh_mmcif: ensure run-time suspend call is processed before suspend
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• [PATCH 07/14] mmc: sh-mmcif: fix missing and consolidate IO completion timeouts
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• [PATCH 00/14] mmc: sh-mmcif: 3.8 fixes and improvements
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• [PATCH 06/14] mmc: sh_mmcif: Avoid unnecessary mmc_delay() at mmc_card_sleepawake()
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• [PATCH 12/14] mmc: sh-mmcif: reset DMA completion immediately before starting DMA
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• [PATCH 04/14] mmc: sh_mmcif: Add support for eMMC Dual Data Rate
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• [PATCH 03/14] mmc: sh_mmcif: add support for bundled MMCIF IRQs
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• [PATCH 08/14] mmc: sh-mmcif: Terminate DMA transactions when detecting timeout or error
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• [PATCH 09/14] mmc: sh-mmcif: (cosmetic) simplify boolean return blocks
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• [PATCH 13/14] mmc: sh-mmcif: fix I/O errors
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• [PATCH 11/14] mmc: sh-mmcif: reset error code for any opcode
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• [PATCH 10/14] mmc: sh-mmcif: fix a race, causing an Oops on SMP
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• [PATCH 01/14] mmc: sh_mmcif: force to fail CMD52 immediately
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• [PATCH 05/14] mmc: sh_mmcif: Use msecs_to_jiffies() for host->timeout
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• [PATCH] mmc: mmci: Support MMC_PM_KEEP_POWER
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxxxxxx>
• Re: [PATCH v3] mmc: core: Add support for idle time BKOPS
  • From: merez@xxxxxxxxxxxxxx
• Re: FW: [PATCH] mmc: mmci: Gate the clock in runtime suspend to save power
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: FW: [PATCH] mmc: mmci: Gate the clock in runtime suspend to save power
  • From: Kevin Liu <keyuan.liu@xxxxxxxxx>
• Re: [PATCH] mmc: mmci: Gate the clock in runtime suspend to save power
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• RE: [RESEND PATCH v4] mmc: fix async request mechanism for sequential read scenarios
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• Re: [PATCH] mmc: mmci: Gate the clock in runtime suspend to save power
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [ping for 3.8 for pci tree] Re: [PATCH] pci: Add a quirk for the Ricoh 0xe22 SD card reader
  • From: Andy Lutomirski <luto@xxxxxxxxxxxxxx>
• Re: [PATCH] mmc: mmci: Gate the clock in runtime suspend to save power
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] mmc: mmci: Gate the clock in runtime suspend to save power
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v2 1/3] mmc: slot-gpio: use devm_* managed functions to ease users
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• [PATCH v2 2/3] mmc: remove unncessary mmc_gpio_free_cd() call from slot-gpio users
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• [PATCH v2 3/3] mmc: sdhci-esdhc-imx: use slot-gpio helpers for CD and WP
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• [PATCH v2 0/3] Use devm_* managed functions to ease slot-gpio users
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• [PATCH] mmc: mmci: Gate the clock in runtime suspend to save power
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxxxxxx>
• [PATCH/RESEND v3 2/2] row: Add support for urgent request handling
  • From: Tanya Brokhman <tlinder@xxxxxxxxxxxxxx>
• [PATCH v3 1/2] row: Adding support for reinsert already dispatched req
  • From: Tanya Brokhman <tlinder@xxxxxxxxxxxxxx>
• [PATCH v3 0/2] block:row: Adding support for urgent requests handling
  • From: Tanya Brokhman <tlinder@xxxxxxxxxxxxxx>
• [PATCH v4 1/2] block: Adding ROW scheduling algorithm
  • From: Tanya Brokhman <tlinder@xxxxxxxxxxxxxx>
• [PATCH/RESEND v4 2/2] block: compile ROW statically into the kernel
  • From: Tanya Brokhman <tlinder@xxxxxxxxxxxxxx>
• [PATCH v4 0/2] ROW scheduling Algorithm
  • From: Tanya Brokhman <tlinder@xxxxxxxxxxxxxx>
• [PATCH v3 1/2] block: Add support for reinsert a dispatched req
  • From: Tanya Brokhman <tlinder@xxxxxxxxxxxxxx>
• [PATCH v3 2/2] block: Add API for urgent request handling
  • From: Tanya Brokhman <tlinder@xxxxxxxxxxxxxx>
• [PATCH v3 0/2] block: Adding support for urgent requests handling
  • From: Tanya Brokhman <tlinder@xxxxxxxxxxxxxx>
• [PATCH] mmc: mmci: Fixup and cleanup code for DMA handling
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] mmc: slot-gpio: use devm_* managed functions to ease users
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: FW: [PATCH v1 0/3] SDIO fixes
  • From: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>
• Re: [PATCH 1/1] mmc: sdhci-acpi: enable runtime-pm for device HID INT33C6
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH v6 11/14] mmc: sdhci: fix the bug that DDR50 can't work for emmc
  • From: Kevin Liu <keyuan.liu@xxxxxxxxx>
• Re: [PATCH 1/2] mmc: slot-gpio: use devm_* managed functions to ease users
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• [PATCH] mmc: sdhci: query card presence from cd-gpio before asking SDHCI
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [PATCH 3/3] mmc: core: Fixup signal voltage switch
  • From: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>
• [GIT PULL] MMC updates for 3.8-rc1
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH 1/2] mmc: slot-gpio: use devm_* managed functions to ease users
  • From: Chris Ball <cjb@xxxxxxxxxx>
• [RESEND PATCH v4] mmc: fix async request mechanism for sequential read scenarios
  • From: Konstantin Dorfman <kdorfman@xxxxxxxxxxxxxx>
• Re: [PATCH 1/1] mmc: sdhci-acpi: enable runtime-pm for device HID INT33C6
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH v1 1/3] mmc: sdio: fix resume failure
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 0/3] Signal voltage switch procedure for UHS mode
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH 1/1] mmc: sdhci-acpi: enable runtime-pm for device HID INT33C6
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH 0/1] mmc: sdhci-acpi: enable runtime-pm for device HID INT33C6
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: [PATCH 3/3] mmc: core: Fixup signal voltage switch
  • From: Johan Rudholm <jrudholm@xxxxxxxxx>
• Re: [PATCH 3/3] mmc: core: Fixup signal voltage switch
  • From: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>
• Re: [PATCH v1 1/3] mmc: sdio: fix resume failure
  • From: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>
• Re: [PATCH v6 11/14] mmc: sdhci: fix the bug that DDR50 can't work for emmc
  • From: Kevin Liu <keyuan.liu@xxxxxxxxx>
• Re: [PATCH v6 11/14] mmc: sdhci: fix the bug that DDR50 can't work for emmc
  • From: Kevin Liu <keyuan.liu@xxxxxxxxx>
• Re: [PATCH v6 11/14] mmc: sdhci: fix the bug that DDR50 can't work for emmc
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH 0/3] mmc: add a card-event host call-back
  • From: Chris Ball <cjb@xxxxxxxxxx>
• [PATCH 0/3] Signal voltage switch procedure for UHS mode
  • From: Johan Rudholm <johan.rudholm@xxxxxxxxxxxxxx>
• [PATCH 2/3] mmc: core: Add card_busy to host_ops
  • From: Johan Rudholm <johan.rudholm@xxxxxxxxxxxxxx>
• [PATCH 3/3] mmc: core: Fixup signal voltage switch
  • From: Johan Rudholm <johan.rudholm@xxxxxxxxxxxxxx>
• [PATCH 1/3] mmc: core: Add mmc_power_cycle
  • From: Johan Rudholm <johan.rudholm@xxxxxxxxxxxxxx>
• Re: [PATCH v1 1/3] mmc: sdio: fix resume failure
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 1/2] mmc: slot-gpio: use devm_* managed functions to ease users
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [PATCH 1/2] mmc: slot-gpio: use devm_* managed functions to ease users
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• [PATCH 2/2] mmc: sdhci-esdhc-imx: use slot-gpio helpers for CD and WP
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• [PATCH 1/2] mmc: slot-gpio: use devm_* managed functions to ease users
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [PATCH 0/3] mmc: add a card-event host call-back
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [PATCH v1 1/3] mmc: sdio: fix resume failure
  • From: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>
• Re: [PATCH v9 05/10] mmc: sdhci: introduce signal_voltage_switch callback function
  • From: Kevin Liu <keyuan.liu@xxxxxxxxx>
• [PATCH v10 10/10] mmc: sdhci: clean code for SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK selected
  • From: Kevin Liu <kliu5@xxxxxxxxxxx>
• Re: [PATCH v1 2/3] mmc: sdio: Fix SDIO 3.0 UHS-I initialization sequence
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v9 05/10] mmc: sdhci: introduce signal_voltage_switch callback function
  • From: Philip Rakity <prakity@xxxxxxxxxx>
• Re: [PATCH v1 2/3] mmc: sdio: Fix SDIO 3.0 UHS-I initialization sequence
  • From: Johan Rudholm <jrudholm@xxxxxxxxx>
• [PATCH v9 10/10] mmc: sdhci: clean code for SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK selected
  • From: Kevin Liu <kliu5@xxxxxxxxxxx>
• [PATCH v9 09/10] mmc: sdhci: correct voltage support caps setting
  • From: Kevin Liu <kliu5@xxxxxxxxxxx>
• [PATCH v9 08/10] mmc: sdhci: add function to get retunig timer count
  • From: Kevin Liu <kliu5@xxxxxxxxxxx>
• [PATCH v9 07/10] mmc: sdhci: remove set_uhs_signaling function
  • From: Kevin Liu <kliu5@xxxxxxxxxxx>
• [PATCH v9 05/10] mmc: sdhci: introduce signal_voltage_switch callback function
  • From: Kevin Liu <kliu5@xxxxxxxxxxx>
• [PATCH v9 04/10] mmc: sdhci: enhance preset value function
  • From: Kevin Liu <kliu5@xxxxxxxxxxx>
• [PATCH v9 06/10] mmc: sdhci: fix the bug that DDR50 can't work for emmc in default code
  • From: Kevin Liu <kliu5@xxxxxxxxxxx>
• [PATCH v9 02/10] mmc: sdhci: refine code for clock disable/enable in set ios
  • From: Kevin Liu <kliu5@xxxxxxxxxxx>
• [PATCH v9 03/10] mmc: sdhci: keep the saved clock var up to date
  • From: Kevin Liu <kliu5@xxxxxxxxxxx>
• [PATCH v9 00/10] mmc: sdhci: fixes and enhancements
  • From: Kevin Liu <kliu5@xxxxxxxxxxx>
• [PATCH v9 01/10] mmc: sdhci: fix transfer mode setting bug for cmds w/o data transfer
  • From: Kevin Liu <kliu5@xxxxxxxxxxx>
• Re: [PATCH v1 1/3] mmc: sdio: fix resume failure
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [GIT PULL] MMC fixes for 3.7
  • From: Chris Ball <cjb@xxxxxxxxxx>
• RE: [PATCH v1 2/3] mmc: sdio: Fix SDIO 3.0 UHS-I initialization sequence
  • From: Bing Zhao <bzhao@xxxxxxxxxxx>
• Re: [PATCH v9 00/10] mmc: sdhci: fixes and enhancements
  • From: Kevin Liu <keyuan.liu@xxxxxxxxx>
• Re: [PATCH v1 1/3] mmc: sdio: fix resume failure
  • From: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>
• Re: [PATCH v9 00/10] mmc: sdhci: fixes and enhancements
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH v9 00/10] mmc: sdhci: fixes and enhancements
  • From: Kevin Liu <keyuan.liu@xxxxxxxxx>
• Re: [PATCH v4] mmc: fix async request mechanism for sequential read scenarios
  • From: Konstantin Dorfman <kdorfman@xxxxxxxxxxxxxx>
• Re: [PATCH 1/1] mmc: sdhci-pci: Enable SDHCI_CAN_DO_HISPD for ricoh SDHCI controller
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH v1 3/3] mmc: sdio: print correct UHS mode during card detection
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v1 1/3] mmc: sdio: fix resume failure
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v3] mmc: core: Add support for idle time BKOPS
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v1 2/3] mmc: sdio: Fix SDIO 3.0 UHS-I initialization sequence
  • From: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>
• RE: [PATCH 1/1] mmc: sdhci-pci: Enable SDHCI_CAN_DO_HISPD for ricoh SDHCI controller
  • From: Madhvapathi Sriram <Madhvapathi.Sriram@xxxxxxx>
• Re: [PATCH 1/3] regulators: add regulator_can_change_voltage() function
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v4] mmc: fix async request mechanism for sequential read scenarios
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• Re: [PATCH 1/1] mmc: sdhci-s3c: Fix compilation warning
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• RE: [PATCH v1 2/3] mmc: sdio: Fix SDIO 3.0 UHS-I initialization sequence
  • From: Bing Zhao <bzhao@xxxxxxxxxxx>
• RE: [PATCH v1 2/3] mmc: sdio: Fix SDIO 3.0 UHS-I initialization sequence
  • From: "Shen, Jackey" <Jackey.Shen@xxxxxxx>
• RE: [PATCH v1 2/3] mmc: sdio: Fix SDIO 3.0 UHS-I initialization sequence
  • From: Bing Zhao <bzhao@xxxxxxxxxxx>
• [PATCH v4] mmc: fix async request mechanism for sequential read scenarios
  • From: Konstantin Dorfman <kdorfman@xxxxxxxxxxxxxx>
• RE: [PATCH v1 2/3] mmc: sdio: Fix SDIO 3.0 UHS-I initialization sequence
  • From: "Shen, Jackey" <Jackey.Shen@xxxxxxx>
• Re: [PATCH 3/3] mmc: sdhci: check voltage range only on regulators aware of voltage value
  • From: Kevin Liu <keyuan.liu@xxxxxxxxx>
• Re: [PATCH 3/3] mmc: sdhci: check voltage range only on regulators aware of voltage value
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] mmc: core: Add support for idle time BKOPS
  • From: merez@xxxxxxxxxxxxxx
• RE: [PATCH v1 2/3] mmc: sdio: Fix SDIO 3.0 UHS-I initialization sequence
  • From: Bing Zhao <bzhao@xxxxxxxxxxx>
• Re: [PATCH 3/3] MMC: sdhci-dove: allow GPIOs to be used for card detection on Dove
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH 3/3] MMC: sdhci-dove: allow GPIOs to be used for card detection on Dove
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] MMC: sdhci-dove: allow GPIOs to be used for card detection on Dove
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH 3/3] MMC: sdhci-dove: allow GPIOs to be used for card detection on Dove
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• [PATCH 3/3] mmc: sdhci: implement the .card_event() method
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• [PATCH 2/3] mmc: extend the slot-gpio card-detection to use host's .card_event() method
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• [PATCH 0/3] mmc: add a card-event host call-back
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• [PATCH 1/3] mmc: add a card-event host operation
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• Re: [PATCH 3/3] mmc: sdhci: check voltage range only on regulators aware of voltage value
  • From: Kevin Liu <keyuan.liu@xxxxxxxxx>
• Re: FW: [PATCH v2] mmc: sdhci: apply voltage range check only for non-fixed regulators
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH 3/3] mmc: sdhci: check voltage range only on regulators aware of voltage value
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH 2/3] mmc: use regulator_can_change_voltage() instead of regulator_count_voltages() hacks
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH 1/3] regulators: add regulator_can_change_voltage() function
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH v2 0/3] Fix fixed regulators support
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH 1/1] mmc: sdhci-s3c: Fix compilation warning
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• [PATCH v1 3/3] mmc: sdio: print correct UHS mode during card detection
  • From: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>
• [PATCH v1 2/3] mmc: sdio: Fix SDIO 3.0 UHS-I initialization sequence
  • From: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>
• [PATCH v1 1/3] mmc: sdio: fix resume failure
  • From: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>
• [PATCH v1 0/3] SDIO fixes
  • From: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>
• Re: [PATCH v3] mmc: core: Add support for idle time BKOPS
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH] mmc: debugfs: Fix incorrect size of string allocation
  • From: Kyungsik Lee <kyungsik.lee@xxxxxxx>
• Re: [PATCH] mmc: dw-mmc: fix the error for a few argument
  • From: Chris Ball <cjb@xxxxxxxxxx>
• [PATCH] mmc: dw-mmc: fix the error for a few argument
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• Re: [PATCH v3 1/4] mmc: dw-mmc: relocate the position called dw_mci_setup_bus()
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• Re: [PATCH V5] Powerpc eSDHC Recover from the ADMA error
  • From: Chris Ball <cjb@xxxxxxxxxx>
• RE: [PATCH V5] Powerpc eSDHC Recover from the ADMA error
  • From: Zhang Haijun-B42677 <B42677@xxxxxxxxxxxxx>
• [PATCH V5] Powerpc eSDHC Recover from the ADMA error
  • From: Haijun Zhang <Haijun.Zhang@xxxxxxxxxxxxx>
• Re: [PATCH V5] Powerpc eSDHC Recover from the ADMA error
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Powerpc : patches sent
  • From: Zhang Haijun-B42677 <B42677@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] mmc: dw-mmc: remove the duplicated code
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH v3 1/4] mmc: dw-mmc: relocate the position called dw_mci_setup_bus()
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [RESEND PATCH] mmc: Limit MMC speed to 52MHz if not HS200
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH 1/2] mmc: dw_mmc: use devres functions in dw_mmc
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH] mmc: sh_mmcif: remove unneeded clock connection ID
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH] mmc: sh_mobile_sdhi: remove unneeded clock connection ID
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH] mmc: sh_mobile_sdhi: fix clock frequency printing
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH 1/2] mmc: Remove redundant null check before kfree in sdio_bus.c
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH] mmc: sdhci-imx-esdhc: use more devm_* functions
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH 3/3] MMC: sdhci-dove: allow GPIOs to be used for card detection on Dove
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH 2/2] mmc: add no-1-8-v device tree flag
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH 1/2] sdhci: add quirk for lack of 1.8v support
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH v3 1/4] mmc: dw-mmc: relocate the position called dw_mci_setup_bus()
  • From: Will Newton <will.newton@xxxxxxxxx>
• Re: [PATCH v3] mmc: core: Add support for idle time BKOPS
  • From: merez@xxxxxxxxxxxxxx
• Re: [PATCH 1/2] mmc: Remove redundant null check before kfree in sdio_bus.c
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• Re: [PATCH] SDIO / PM: Add empty bus-level suspend/resume callbacks
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH] SDIO / PM: Add empty bus-level suspend/resume callbacks
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] SDIO / PM: Add empty bus-level suspend/resume callbacks
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH] SDIO / PM: Add empty bus-level suspend/resume callbacks
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH] PM / SDIO: Use empty system suspend/resume callbacks at the bus level (was: Re: Recent ...)
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH] pci: Add a quirk for the Ricoh 0xe22 SD card reader
  • From: Andy Lutomirski <luto@xxxxxxxxxxxxxx>
• [PATCH] pci: Add a quirk for the Ricoh 0xe22 SD card reader
  • From: Andy Lutomirski <luto@xxxxxxxxxxxxxx>
• Re: omap_hsmmc: SDIO IRQ on AM335x family
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: omap_hsmmc: SDIO IRQ on AM335x family
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: FW: [PATCH v2] mmc: sdhci: apply voltage range check only for non-fixed regulators
  • From: Chris Ball <cjb@xxxxxxxxxx>
• [RESEND PATCH] mmc: Limit MMC speed to 52MHz if not HS200
  • From: "Al Cooper" <alcooperx@xxxxxxxxx>
• Re: SDIO 4.0
  • From: Chris Ball <cjb@xxxxxxxxxx>
• RE: [PATCH v3 1/4] mmc: dw_mmc: Add "disable-wp" device tree property
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• RE: [PATCH 2/2] mmc: dw_mmc: make sure of clearing HLE interrupt
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• omap_hsmmc: SDIO IRQ on AM335x family
  • From: Andreas Fenkart <andreas.fenkart@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] mmc: sh_mobile_sdhi: fix clock frequency printing
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH] mmc: sh_mmcif: remove unneeded clock connection ID
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH] mmc: sh_mobile_sdhi: remove unneeded clock connection ID
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] mmc: dw_mmc: exynos: Stop claiming wp-gpio
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v3 2/4] ARM: dts: Add disable-wp for sd card slot on smdk5250
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v3 1/4] mmc: dw_mmc: Add "disable-wp" device tree property
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v3 4/4] mmc: dw_mmc: Handle wp-gpios from device tree
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v3 3/4] mmc: dw_mmc: exynos: Remove code for wp-gpios
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• SDIO 4.0
  • From: pclinux <pclinux@xxxxxxxxxxxxxx>
• [PATCH V5] Powerpc eSDHC Recover from the ADMA error
  • From: Haijun Zhang <Haijun.Zhang@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] mmc: dw-mmc: remove the duplicated code
  • From: Jae hoon Chung <jh80.chung@xxxxxxxxx>
• Re: [PATCH v3 3/4] mmc: dw-mmc: check whether card is busy or not, before disabling clock
  • From: Jae hoon Chung <jh80.chung@xxxxxxxxx>
• Re: [PATCH 2/2] mmc: dw_mmc: make sure of clearing HLE interrupt
  • From: Jae hoon Chung <jh80.chung@xxxxxxxxx>
• Re: [PATCH v3] mmc: core: Add support for idle time BKOPS
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• Re: [PATCH] mmc: mmci: Support non-power-of-two block sizes for ux500v2 variant
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• RE: [PATCH v2 1/2] mmc: dw_mmc: exynos: Stop claiming wp-gpio
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• RE: [PATCH 2/2] mmc: dw_mmc: make sure of clearing HLE interrupt
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• RE: [PATCH V4] Powerpc eSDHC Recover from the ADMA error
  • From: Zhang Haijun-B42677 <B42677@xxxxxxxxxxxxx>
• RE: [PATCH] Powerpc/eSDHC: Calculate the applicable mmc erase timeout value
  • From: Zhang Haijun-B42677 <B42677@xxxxxxxxxxxxx>
• [PATCH 1/2 V5] Powerpc/eSDHC: Calculate the applicable mmc erase timeout value
  • From: Haijun Zhang <Haijun.Zhang@xxxxxxxxxxxxx>
• [PATCH] Powerpc/eSDHC: Calculate the applicable mmc erase timeout value
  • From: Haijun Zhang <Haijun.Zhang@xxxxxxxxxxxxx>
• [PATCH V4] Powerpc eSDHC Recover from the ADMA error
  • From: Haijun Zhang <Haijun.Zhang@xxxxxxxxxxxxx>
• Re: [PATCH] Powerpc/eSDHC: Calculate the applicable mmc erase timeout value
  • From: Anton Vorontsov <cbouatmailru@xxxxxxxxx>
• RE: [PATCH] Powerpc/eSDHC: Calculate the applicable mmc erase timeout value
  • From: Zhang Haijun-B42677 <B42677@xxxxxxxxxxxxx>
• [PATCH] Powerpc/eSDHC: Calculate the applicable mmc erase timeout value
  • From: Haijun Zhang <Haijun.Zhang@xxxxxxxxxxxxx>
• Re: [PATCH 1/2 v4] Powerpc/eSDHC: Calculate the applicable mmc erase timeout value
  • From: Anton Vorontsov <cbouatmailru@xxxxxxxxx>
• [PATCH 1/2 v4] Powerpc/eSDHC: Calculate the applicable mmc erase timeout value
  • From: Haijun Zhang <Haijun.Zhang@xxxxxxxxxxxxx>
• Re: [PATCH -next] mmc: wmt-sdmmc: fix potential NULL pointer dereference in wmt_mci_probe()
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• [PATCH -next] mmc: wmt-sdmmc: fix potential NULL pointer dereference in wmt_mci_probe()
  • From: Wei Yongjun <weiyj.lk@xxxxxxxxx>
• [RFC][PATCH] pxamci: defining CONFIG_REGULATOR_DUMMY may break PXA MMC controller driver.
  • From: dromede@xxxxxxxxx
• Re: [PATCH v2 1/2] mmc: dw_mmc: exynos: Stop claiming wp-gpio
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] mmc: mmci: Support non-power-of-two block sizes for ux500v2 variant
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] mmc: mmci: Support non-power-of-two block sizes for ux500v2 variant
  • From: Per Forlin <per.lkml@xxxxxxxxx>
• Re: [PATCH v3] mmc: core: Add support for idle time BKOPS
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH] mmc: mmci: Fixup and cleanup code for DMA handling
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 2/2] mmc: dw_mmc: make sure of clearing HLE interrupt
  • From: James Hogan <james.hogan@xxxxxxxxxx>
• Re: [PATCH 1/2] mmc: dw_mmc: use devres functions in dw_mmc
  • From: James Hogan <james.hogan@xxxxxxxxxx>
• [PATCH 2/2] mmc: dw_mmc: make sure of clearing HLE interrupt
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• [PATCH 1/2] mmc: dw_mmc: use devres functions in dw_mmc
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• RE: [PATCH v2 1/2] mmc: dw_mmc: exynos: Stop claiming wp-gpio
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• [PATCH] mmc: sh_mobile_sdhi: fix clock frequency printing
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• [PATCH] mmc: sh_mmcif: remove unneeded clock connection ID
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• [PATCH] mmc: sh_mobile_sdhi: remove unneeded clock connection ID
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• RE: [PATCH v3 3/4] mmc: dw-mmc: check whether card is busy or not, before disabling clock
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• Re: [PATCH v3 3/4] mmc: dw-mmc: check whether card is busy or not, before disabling clock
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• Re: [PATCH v3 1/4] mmc: dw-mmc: relocate the position called dw_mci_setup_bus()
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• Re: [PATCH v3 2/4] mmc: dw-mmc: remove the duplicated code
  • From: James Hogan <james.hogan@xxxxxxxxxx>
• RE: [PATCH v3 3/4] mmc: dw-mmc: check whether card is busy or not, before disabling clock
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• RE: [PATCH v3 2/4] mmc: dw-mmc: remove the duplicated code
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• RE: [PATCH v3 1/4] mmc: dw-mmc: relocate the position called dw_mci_setup_bus()
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• Re: linux-next: Tree for Nov 26 (mmc/host/tifm_sd.c)
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH] mmc: Added quirks for Ricoh 1180:e823 lower base clock frequency
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH] mmc: Added quirks for Ricoh 1180:e823 lower base clock frequency
  • From: Manoj Iyer <manoj.iyer@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] mmc: sdhci-spear: Don't call clk_{un}prepare() in suspend resume
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH 1/2] mmc: sdhci-spear: Initialize sdhci clk to 50 MHz
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH v1] mmc: fix async request mechanism for sequential read scenarios
  • From: Konstantin Dorfman <kdorfman@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] mmc: sdhci-spear: Initialize sdhci clk to 50 MHz
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH 1/2] mmc: sdhci-spear: Initialize sdhci clk to 50 MHz
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH 1/2] mmc: sdhci-spear: Initialize sdhci clk to 50 MHz
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH 1/7] mmc: omap_hsmmc: Fix Oops in case of data errors
  • From: Venkatraman S <svenkatr@xxxxxx>
• Re: [PATCH] mmc: mmci: Support non-power-of-two block sizes for ux500v2 variant
  • From: Per Förlin <per.forlin@xxxxxxxxxxxxxx>
• [MX25][MMC]: SDHC very slow (300-600 KB/s) on i.MX25 board
  • From: Stefan Koch <stefan.koch10@xxxxxxxxx>
• Re: [PATCH 1/2] mmc: Remove redundant null check before kfree in sdio_bus.c
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• Re: [PATCH] mmc: mmci: Support non-power-of-two block sizes for ux500v2 variant
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] mmc: mmci: Support non-power-of-two block sizes for ux500v2 variant
  • From: Per Förlin <per.forlin@xxxxxxxxxxxxxx>
• RE: [mmc:mmc-next 45/63] of_iommu.c:(.text+0x114dbc): undefined reference to `__aeabi_uldivmod'
  • From: Zhang Haijun-B42677 <B42677@xxxxxxxxxxxxx>
• [PATCH 1/2 V2] mmc:block : Convert the cmd_timeou_ms to u64 to avoid overflow
  • From: Haijun Zhang <Haijun.Zhang@xxxxxxxxxxxxx>
• [PATCH 2/2 V2] mmc:host: Use u64 to calculate the timeout value to avoid overflow
  • From: Haijun Zhang <Haijun.Zhang@xxxxxxxxxxxxx>
• Re: [PATCH 3/3] MMC: sdhci-dove: allow GPIOs to be used for card detection on Dove
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• RE: [PATCH] Powerpc eSDHC: Convert the cmd_timeou_ms to u64 to avoid overflow
  • From: Zhang Haijun-B42677 <B42677@xxxxxxxxxxxxx>
• Re: [PATCH] Powerpc eSDHC: Convert the cmd_timeou_ms to u64 to avoid overflow
  • From: Anton Vorontsov <cbouatmailru@xxxxxxxxx>
• Re: [PATCH] Use u64 to calculate the timeout value to avoid overflow
  • From: Anton Vorontsov <cbouatmailru@xxxxxxxxx>
• [PATCH] Use u64 to calculate the timeout value to avoid overflow
  • From: Haijun Zhang <Haijun.Zhang@xxxxxxxxxxxxx>
• [PATCH] Powerpc eSDHC: Convert the cmd_timeou_ms to u64 to avoid overflow
  • From: Haijun Zhang <Haijun.Zhang@xxxxxxxxxxxxx>
• RE: [mmc:mmc-next 45/63] of_iommu.c:(.text+0x114dbc): undefined reference to `__aeabi_uldivmod'
  • From: Zhang Haijun-B42677 <B42677@xxxxxxxxxxxxx>
• [PATCH] mmc: sdhci-imx-esdhc: use more devm_* functions
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [PATCH 3/3] MMC: sdhci-dove: allow GPIOs to be used for card detection on Dove
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [mmc:mmc-next 45/63] of_iommu.c:(.text+0x114dbc): undefined reference to `__aeabi_uldivmod'
  • From: Fengguang Wu <fengguang.wu@xxxxxxxxx>
• RE: [mmc:mmc-next 45/63] of_iommu.c:(.text+0x114dbc): undefined reference to `__aeabi_uldivmod'
  • From: Zhang Haijun-B42677 <B42677@xxxxxxxxxxxxx>
• Re: [mmc:mmc-next 45/63] of_iommu.c:(.text+0x114dbc): undefined reference to `__aeabi_uldivmod'
  • From: Fengguang Wu <fengguang.wu@xxxxxxxxx>
• RE: [mmc:mmc-next 45/63] of_iommu.c:(.text+0x114dbc): undefined reference to `__aeabi_uldivmod'
  • From: Huang Changming-R66093 <r66093@xxxxxxxxxxxxx>
• RE: [mmc:mmc-next 45/63] of_iommu.c:(.text+0x114dbc): undefined reference to `__aeabi_uldivmod'
  • From: Zhang Haijun-B42677 <B42677@xxxxxxxxxxxxx>
• Re: [mmc:mmc-next 45/63] of_iommu.c:(.text+0x114dbc): undefined reference to `__aeabi_uldivmod'
  • From: Chris Ball <cjb@xxxxxxxxxx>
• [mmc:mmc-next 45/63] of_iommu.c:(.text+0x114dbc): undefined reference to `__aeabi_uldivmod'
  • From: kbuild test robot <fengguang.wu@xxxxxxxxx>
• Re: [PATCH 1/7] mmc: omap_hsmmc: Fix Oops in case of data errors
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH] SDHC: support command with busy response expecting for TC
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH 3/3] MMC: sdhci-dove: allow GPIOs to be used for card detection on Dove
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH 1/2] sdhci: add quirk for lack of 1.8v support
  • From: Philip Rakity <prakity@xxxxxxxxxx>
• Re: [PATCH 1/1] mmc: sdhci-dove: remove duplicate inclusion of linux/err.h
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH 0/4] Support for optional MMC PM capabilities
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH v2 2/2] mmc: host: sdhci-s3c: Add support for pinctrl
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH 1/2 v3] Powerpc/eSDHC: Calculate the applicable mmc erase timeout value
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH] Powerpc eSDHC: Use u64 to calculate the timeout value to avoid overflow
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH v2 2/2] mmc: host: sdhci-s3c: Add support for pinctrl
  • From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
• Re: [PATCH v6 09/14] mmc: sdhci-pxav3: add quirks2
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH v2 2/2] mmc: host: sdhci-s3c: Add support for pinctrl
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH 1/2] sdhci: add quirk for lack of 1.8v support
  • From: Daniel Drake <dsd@xxxxxxxxxx>
• Re: [PATCH 1/2] sdhci: add quirk for lack of 1.8v support
  • From: Philip Rakity <prakity@xxxxxxxxxx>
• Re: UHS-I voltage switching on OLPC XO-1.75
  • From: Daniel Drake <dsd@xxxxxxxxxx>
• [PATCH 2/2] mmc: add no-1-8-v device tree flag
  • From: Daniel Drake <dsd@xxxxxxxxxx>
• [PATCH 1/2] sdhci: add quirk for lack of 1.8v support
  • From: Daniel Drake <dsd@xxxxxxxxxx>
• Re: [PATCH v3] mmc: core: Add support for idle time BKOPS
  • From: merez@xxxxxxxxxxxxxx
• [PATCH v3] mmc: core: Add support for idle time BKOPS
  • From: Maya Erez <merez@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/3] Add SDHCI ACPI driver
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH v2 3/3] mmc: sdhci-acpi: add SDHCI ACPI driver
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] ACPI: add SDHCI to ACPI platform devices
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] mmc: dw_mmc: enable controller interrupt before calling mmc_start_host
  • From: James Hogan <james.hogan@xxxxxxxxxx>
• Re: [PATCH 3/3] MMC: sdhci-dove: allow GPIOs to be used for card detection on Dove
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] MMC: sdhci-dove: allow GPIOs to be used for card detection on Dove
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• [PATCH v2 1/3] PNPACPI: exclude devices already bound
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH v2 2/3] ACPI: add SDHCI to ACPI platform devices
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH v2 3/3] mmc: sdhci-acpi: add SDHCI ACPI driver
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH v2 0/3] Add SDHCI ACPI driver
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: [PATCH 0/3] Add SDHCI ACPI driver
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH 0/3] Add SDHCI ACPI driver
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH 0/3] Add SDHCI ACPI driver
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH] SDHC: support command with busy response expecting for TC
  • From: <r66093@xxxxxxxxxxxxx>
• Re: [PATCH 0/3] Add SDHCI ACPI driver
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: [PATCH 3/3] mmc: sdhci-acpi: add SDHCI ACPI driver
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/3] Add SDHCI ACPI driver
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] MMC: sdhci-dove: allow GPIOs to be used for card detection on Dove
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] MMC: sdhci-dove: allow GPIOs to be used for card detection on Dove
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• [PATCH 3/3] MMC: sdhci-dove: allow GPIOs to be used for card detection on Dove
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 2/3] MMC: sdhci-dove: use two-stage initialization for sdhci-pltfm
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 1/3] MMC: sdhci-dove: use devm_clk_get()
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 0/3] sdhci-dove GPIO support for card detection
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 414/493] mmc: remove use of __devexit
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• Re: [PATCH 237/493] mmc: remove use of __devinit
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• [PATCH v2 1/2] mmc: dw_mmc: exynos: Stop claiming wp-gpio
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v2 2/2] mmc: dw_mmc: Handle wp-gpios from device tree
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 0/3] Add SDHCI ACPI driver
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH 0/3] Add SDHCI ACPI driver
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH] mmc: Added quirks for Ricoh 1180:e823 lower base clock frequency
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH 2/2] mmc: dw_mmc: Handle wp-gpios from device tree
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH 0/3] Add SDHCI ACPI driver
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: [PATCH 0/3] Add SDHCI ACPI driver
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: [PATCH v3 0/5] mmc: Add access to RPMB partition
  • From: "Sundar J. Dev" <sundarjdev@xxxxxxxxx>
• Re: [PATCH v3 1/4] mmc: dw-mmc: relocate the position called dw_mci_setup_bus()
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• Re: [PATCH 2/2] mmc: dw_mmc: Handle wp-gpios from device tree
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 2/2] mmc: dw_mmc: Handle wp-gpios from device tree
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• RE: [PATCH 2/2] mmc: dw_mmc: Handle wp-gpios from device tree
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• RE: [PATCH 2/2] mmc: dw_mmc: Handle wp-gpios from device tree
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• Re: FW: eMMC
  • From: Kevin Liu <keyuan.liu@xxxxxxxxx>
• Re: eMMC
  • From: Kevin Liu <keyuan.liu@xxxxxxxxx>
• [PATCH 2/2] mmc: dw_mmc: Handle wp-gpios from device tree
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] mmc: mmci: Support non-power-of-two block sizes for ux500v2 variant
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH 1/2] mmc: dw_mmc: exynos: Stop claiming wp-gpio
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH 2/3] ACPI: add SDHCI to ACPI platform devices
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: eMMC
  • From: Kevin Liu <keyuan.liu@xxxxxxxxx>
• [PATCH 3/3] mmc: sdhci-acpi: add SDHCI ACPI driver
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH 1/3] PNPACPI: exclude SDHCI devices
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: eMMC
  • From: Philip Rakity <prakity@xxxxxxxxxx>
• Re: eMMC
  • From: Philip Rakity <prakity@xxxxxxxxxx>
• [PATCH] mmc: esdhi: Add SDHCI_QUIRK_QORIQ_CIRCUIT_SUPPORT_VS33 quirk support
  • From: Chunhe Lan <Chunhe.Lan@xxxxxxxxxxxxx>
• Re: [PATCH] mmc: mmci: Support non-power-of-two block sizes for ux500v2 variant
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] mmc: mmci: Support non-power-of-two block sizes for ux500v2 variant
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] mmc: mmci: Support non-power-of-two block sizes for ux500v2 variant
  • From: Per Forlin <per.lkml@xxxxxxxxx>
• Re: [PATCH v3 0/5] mmc: Add access to RPMB partition
  • From: Loic PALLARDY <loic.pallardy@xxxxxx>
• Re: [PATCH] mmc: mmci: Support non-power-of-two block sizes for ux500v2 variant
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] mmc: mmci: Support non-power-of-two block sizes for ux500v2 variant
  • From: Per Forlin <per.lkml@xxxxxxxxx>
• Re: [PATCH] mmc: mmci: Support non-power-of-two block sizes for ux500v2 variant
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] mmc: mmci: Fixup and cleanup code for DMA handling
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v3 0/2] rtsx patch for for-next branch in MFD tree
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• RFC: eMMC
  • From: Philip Rakity <prakity@xxxxxxxxxx>
• Re: [PATCH 077/493] mmc: remove use of __devexit_p
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• Re: [GIT PULL v2] at91: fixes for 3.7-rc7
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH v3 0/5] mmc: Add access to RPMB partition
  • From: "Sundar J. Dev" <sundarjdev@xxxxxxxxx>
• Re: [PATCH v2 2/2] mmc: host: sdhci-s3c: Add support for pinctrl
  • From: Thomas Abraham <thomas.abraham@xxxxxxxxxx>
• Re: [PATCH v2 1/2] mmc: host: sdhci-s3c: Use devm_gpio_request to request GPIOs
  • From: Thomas Abraham <thomas.abraham@xxxxxxxxxx>
• [PATCH 1/1] mmc:atmel-mci: use devm_gpio_request/free and configure the pin corrently
  • From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
• Re: [PATCH v2 0/2] mmc: host: sdhci-s3c: Add support for pinctrl interface
  • From: Tomasz Figa <t.figa@xxxxxxxxxxx>
• Re: [PATCH] regulator: add missing prototype for regulator_is_supported_voltage
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] regulator: add missing prototype for regulator_is_supported_voltage
  • From: Eric Miao <eric.y.miao@xxxxxxxxx>
• Re: [PATCH] regulator: add missing prototype for regulator_is_supported_voltage
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/5] mmc: Add access to RPMB partition
  • From: Loic PALLARDY <loic.pallardy@xxxxxx>
• Re: [PATCH] regulator: add missing prototype for regulator_is_supported_voltage
  • From: Eric Miao <eric.y.miao@xxxxxxxxx>
• Re: [PATCH] regulator: add missing prototype for regulator_is_supported_voltage
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] regulator: add missing prototype for regulator_is_supported_voltage
  • From: Eric Miao <eric.y.miao@xxxxxxxxx>
• Re: [GIT PULL v2] at91: fixes for 3.7-rc7
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH] mmc: dw_mmc: enable controller interrupt before calling mmc_start_host
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• Re: [GIT PULL] at91: fixes for 3.7-rc7
  • From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
• Re: [PATCH v1] mmc: fix async request mechanism for sequential read scenarios
  • From: "Konstantin Dorfman" <kdorfman@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/5] mmc: Add access to RPMB partition
  • From: Krishna Konda <kkonda@xxxxxxxxxxxxxx>
• Re: [GIT PULL] at91: fixes for 3.7-rc7
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RFC PATCH 3.7.0-rc4 0/4] introduce of_simple_module_id_table macro
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v1] mmc: fix async request mechanism for sequential read scenarios
  • From: Konstantin Dorfman <kdorfman@xxxxxxxxxxxxxx>
• Re: FW: [PATCH v2] mmc: sdhci: apply voltage range check only for non-fixed regulators
  • From: Kevin Liu <keyuan.liu@xxxxxxxxx>
• Re: FW: [PATCH v2] mmc: sdhci: apply voltage range check only for non-fixed regulators
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: FW: [PATCH v2] mmc: sdhci: apply voltage range check only for non-fixed regulators
  • From: Kevin Liu <keyuan.liu@xxxxxxxxx>
• Re: FW: [PATCH v2] mmc: sdhci: apply voltage range check only for non-fixed regulators
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH v3] regulator: treat regulators with constant volatage as fixed
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: FW: [PATCH v2] mmc: sdhci: apply voltage range check only for non-fixed regulators
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: FW: [PATCH v2] mmc: sdhci: apply voltage range check only for non-fixed regulators
  • From: Kevin Liu <keyuan.liu@xxxxxxxxx>
• Re: FW: [PATCH v2] mmc: sdhci: apply voltage range check only for non-fixed regulators
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH] mmc: dw_mmc: enable controller interrupt before calling mmc_start_host
  • From: James Hogan <james.hogan@xxxxxxxxxx>
• [PATCH 2/2] mmc: Remove redundant null check before kfree in bus.c
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• [PATCH 1/2] mmc: Remove redundant null check before kfree in sdio_bus.c
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• Re: [PATCH v3 4/4] mmc: dw-mmc: remove complier warning
  • From: James Hogan <james.hogan@xxxxxxxxxx>
• [GIT PULL v2] at91: fixes for 3.7-rc7
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: FW: [PATCH v2] mmc: sdhci: apply voltage range check only for non-fixed regulators
  • From: Kevin Liu <keyuan.liu@xxxxxxxxx>
• Re: UHS-I voltage switching on OLPC XO-1.75
  • From: Johan Rudholm <jrudholm@xxxxxxxxx>
• Re: [PATCH v2] mmc: sdhci: apply voltage range check only for non-fixed regulators
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Sony memory stick pro duo is not recognized
  • From: Ádám <kricsek@xxxxxxxxx>
• Re: [PATCH v3 0/5] mmc: Add access to RPMB partition
  • From: Loic PALLARDY <loic.pallardy@xxxxxx>
• Re: FW: [PATCH v2] mmc: sdhci: apply voltage range check only for non-fixed regulators
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH 1/3] mmc: omap_hsmmc: NULL pointer upon DTO after CC.
  • From: Venkatraman S <svenkatr@xxxxxx>
• Re: [PATCH 1/2] mmc: sdhci-spear: Initialize sdhci clk to 50 MHz
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH 2/2] mmc/host/s3cmci: remove the excess "goto irq_out"
  • From: Jing Wang <windsdaemon@xxxxxxxxx>
• Re: [PATCH] mmc: dw_mmc: enable controller interrupt before calling mmc_start_host
  • From: Yuvaraj Kumar <yuvaraj.cd@xxxxxxxxx>
• [PATCH] mmc: sdhci-s3c: Use NULL instead of 0 for pointers
  • From: Tushar Behera <tushar.behera@xxxxxxxxxx>
• [PATCH v3 0/2] rtsx patch for for-next branch in MFD tree
  • From: <wei_wang@xxxxxxxxxxxxxx>
• [PATCH v3 2/2] mmc/host/rtsx: Explicitely include slab.h in rtsx_pci_sdmmc.c
  • From: <wei_wang@xxxxxxxxxxxxxx>
• [PATCH v3 1/2] mmc/host/rtsx: Configure SD_CFG2 register in sd_rw_multi
  • From: <wei_wang@xxxxxxxxxxxxxx>
• Re: [PATCH 237/493] mmc: remove use of __devinit
  • From: viresh kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v2 1/2] mmc/host/rtsx: Configure SD_CFG2 register in sd_rw_multi
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH 077/493] mmc: remove use of __devexit_p
  • From: viresh kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v2 1/2] mmc/host/rtsx: Configure SD_CFG2 register in sd_rw_multi
  • From: wwang <wei_wang@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] mmc/host/rtsx: Configure SD_CFG2 register in sd_rw_multi
  • From: Chris Ball <cjb@xxxxxxxxxx>
• [PATCH v2 1/2] mmc/host/rtsx: Configure SD_CFG2 register in sd_rw_multi
  • From: <wei_wang@xxxxxxxxxxxxxx>
• [PATCH v2 2/2] mmc/host/rtsx: Explicitely include slab.h in rtsx_pci_sdmmc.c
  • From: <wei_wang@xxxxxxxxxxxxxx>
• [PATCH v2 0/2] rtsx patch for for-next branch in MFD tree
  • From: <wei_wang@xxxxxxxxxxxxxx>
• RE: [PATCH v3] mmc: fix async request mechanism for sequential read scenarios
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• Re: [PATCH 1/2] mmc: Configure SD_CFG2 register in sd_rw_multi
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH v3 4/4] mmc: dw-mmc: remove complier warning
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• [PATCH 2/2] mmc: Explicitely include slab.h in rtsx_pci_sdmmc.c
  • From: <wei_wang@xxxxxxxxxxxxxx>
• [PATCH 1/2] mmc: Configure SD_CFG2 register in sd_rw_multi
  • From: <wei_wang@xxxxxxxxxxxxxx>
• [PATCH 0/2] rtsx patch for for-next branch in MFD tree
  • From: <wei_wang@xxxxxxxxxxxxxx>
• [PATCH 3/3] MMC: omap_hsmmc: add DT property for ti-swakeup-not-implemented.
  • From: Andreas Fenkart <andreas.fenkart@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/3] mmc: omap_hsmmc: Enable the use of SDIO card interrupts.
  • From: Andreas Fenkart <andreas.fenkart@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/3] mmc: omap_hsmmc: NULL pointer upon DTO after CC.
  • From: Andreas Fenkart <andreas.fenkart@xxxxxxxxxxxxxxxxxxx>
• [PATCH 0/3] mmc: omap_hsmmc: sdio irq am335x.
  • From: Andreas Fenkart <andreas.fenkart@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1] mmc: fix async request mechanism for sequential read scenarios
  • From: Per Förlin <per.forlin@xxxxxxxxxxxxxx>
• [PATCH 313/493] mmc: remove use of __devinitdata
  • From: Bill Pemberton <wfp5p@xxxxxxxxxxxx>
• [PATCH 362/493] mmc: remove use of __devinitconst
  • From: Bill Pemberton <wfp5p@xxxxxxxxxxxx>
• [PATCH 237/493] mmc: remove use of __devinit
  • From: Bill Pemberton <wfp5p@xxxxxxxxxxxx>
• [PATCH 077/493] mmc: remove use of __devexit_p
  • From: Bill Pemberton <wfp5p@xxxxxxxxxxxx>
• [PATCH 414/493] mmc: remove use of __devexit
  • From: Bill Pemberton <wfp5p@xxxxxxxxxxxx>
• Re: [PATCH v3 0/5] mmc: Add access to RPMB partition
  • From: Krishna Konda <kkonda@xxxxxxxxxxxxxx>
• Re: [GIT PULL] at91: fixes for 3.7-rc7
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [GIT PULL] at91: fixes for 3.7-rc7
  • From: Olof Johansson <olof@xxxxxxxxx>
• [GIT PULL] at91: fixes for 3.7-rc7
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• [PATCH v2 7/7] mmc: omap_hsmmc: Cleanup up bitmap definitions of Interrupt Register
  • From: Venkatraman S <svenkatr@xxxxxx>
• [PATCH 6/7] mmc: omap_hsmmc: convert critical failure reports to dev_err
  • From: Venkatraman S <svenkatr@xxxxxx>
• [PATCH 5/7] mmc: omap_hsmmc: introduce omap_hsmmc_prepare/complete
  • From: Venkatraman S <svenkatr@xxxxxx>
• [PATCH 4/7] mmc: omap_hsmmc: Enable HSPE bit for high speed cards
  • From: Venkatraman S <svenkatr@xxxxxx>
• [PATCH 3/7] mmc: omap_hsmmc: update error code for response_busy cmd
  • From: Venkatraman S <svenkatr@xxxxxx>
• [PATCH 2/7] mmc: omap_hsmmc: no reset of cmd state machine for DCRC
  • From: Venkatraman S <svenkatr@xxxxxx>
• [PATCH 1/7] mmc: omap_hsmmc: Fix Oops in case of data errors
  • From: Venkatraman S <svenkatr@xxxxxx>
• Re: [PATCH 0/5] mmc: omap_hsmmc: Few patches for omap_hsmmc
  • From: Venkatraman S <svenkatr@xxxxxx>
• Re: [PATCH v1] mmc: fix async request mechanism for sequential read scenarios
  • From: Per Förlin <per.forlin@xxxxxxxxxxxxxx>
• Re: [PATCH] mmc: dw_mmc: enable controller interrupt before calling mmc_start_host
  • From: James Hogan <james.hogan@xxxxxxxxxx>
• Re: [PATCH v3 4/4] mmc: dw-mmc: remove complier warning
  • From: James Hogan <james.hogan@xxxxxxxxxx>
• Re: [PATCH v3 4/4] mmc: dw-mmc: remove complier warning
  • From: James Hogan <james.hogan@xxxxxxxxxx>
• Re: [PATCH] mmc: Standardise capability type
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 1/1] mmc: sdhci-dove: remove duplicate inclusion of linux/err.h
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• Re: [PATCH] mmc: Standardise capability type
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH v6 12/14] mmc: sdhci-pxav3: remove set_uhs_signaling function
  • From: Kevin Liu <keyuan.liu@xxxxxxxxx>
• Re: [PATCH v3 0/5] mmc: Add access to RPMB partition
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v1] mmc: fix async request mechanism for sequential read scenarios
  • From: Konstantin Dorfman <kdorfman@xxxxxxxxxxxxxx>
• Re: [PATCH] mmc: Standardise capability type
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v6 11/14] mmc: sdhci: fix the bug that DDR50 can't work for emmc
  • From: Kevin Liu <keyuan.liu@xxxxxxxxx>
• RE: [PATCH] mmc,sdio: advancing the setting of dev name in mmc_sdio_init_card()
  • From: Huang Changming-R66093 <r66093@xxxxxxxxxxxxx>
• Re: [PATCH] mmc,sdio: Fix the panic due to devname NULL when calling pm_runtime_set_active()
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH] mmc,sdio: advancing the setting of dev name in mmc_sdio_init_card()
  • From: Chuansheng Liu <chuansheng.liu@xxxxxxxxx>
• RE: [PATCH] mmc,sdio: Fix the panic due to devname NULL when calling pm_runtime_set_active()
  • From: "Liu, Chuansheng" <chuansheng.liu@xxxxxxxxx>
• Re: [PATCH] mmc,sdio: Fix the panic due to devname NULL when calling pm_runtime_set_active()
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH 3/3 v5] ESDHC: add callback esdhc_of_get_cd to detect card
  • From: <r66093@xxxxxxxxxxxxx>
• [PATCH 2/3 v6] SDHCI: add sdhci_get_cd callback to detect the card
  • From: <r66093@xxxxxxxxxxxxx>
• [PATCH 1/3 v5] MMC/SD: Add callback function to detect card
  • From: <r66093@xxxxxxxxxxxxx>
• RE: [PATCH] mmc,sdio: Fix the panic due to devname NULL when calling pm_runtime_set_active()
  • From: "Liu, Chuansheng" <chuansheng.liu@xxxxxxxxx>
• RE: [PATCH 2/2] Powerpc/eSDHC: Add limit to data and erase timeout value calculation
  • From: Zhang Haijun-B42677 <B42677@xxxxxxxxxxxxx>
• [PATCH 1/2 v3] Powerpc/eSDHC: Calculate the applicable mmc erase timeout value
  • From: Haijun Zhang <Haijun.Zhang@xxxxxxxxxxxxx>
• [PATCH 2/2 v3] Powerpc/eSDHC: Add limit to data and erase timeout value calculation
  • From: Haijun Zhang <Haijun.Zhang@xxxxxxxxxxxxx>
• [PATCH] Powerpc eSDHC: Use u64 to calculate the timeout value to avoid overflow
  • From: Haijun Zhang <Haijun.Zhang@xxxxxxxxxxxxx>
• RE: [PATCH 2/2] Powerpc/eSDHC: Add limit to data and erase timeout value calculation
  • From: Zhang Haijun-B42677 <B42677@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] Powerpc/eSDHC: Add limit to data and erase timeout value calculation
  • From: Anton Vorontsov <cbouatmailru@xxxxxxxxx>
• Re: [PATCH 2/2] Powerpc/eSDHC: Add limit to data and erase timeout value calculation
  • From: Anton Vorontsov <cbouatmailru@xxxxxxxxx>
• Re: [PATCH] Powerpc eSDHC: Use u64 to calculate the timeout value to avoid overflow
  • From: Anton Vorontsov <anton.vorontsov@xxxxxxxxxx>
• [PATCH 4/4] mmc: dw_mmc: Add sdio power bindings
  • From: Abhilash Kesavan <a.kesavan@xxxxxxxxxxx>
• [PATCH 3/4] mmc: sdhci-pltfm: Support optional pm properties
  • From: Abhilash Kesavan <a.kesavan@xxxxxxxxxxx>
• [PATCH 2/4] mmc: dt: Add optional pm properties to core binding
  • From: Abhilash Kesavan <a.kesavan@xxxxxxxxxxx>
• [PATCH 1/4] mmc: dt: Fix typo in filename
  • From: Abhilash Kesavan <a.kesavan@xxxxxxxxxxx>
• [PATCH 0/4] Support for optional MMC PM capabilities
  • From: Abhilash Kesavan <a.kesavan@xxxxxxxxxxx>
• RE: [PATCH 1/2 V2] Powerpc/eSDHC: Calculate the applicable mmc erase timeout value
  • From: Zhang Haijun-B42677 <B42677@xxxxxxxxxxxxx>
• [PATCH 1/2 v3] Powerpc/eSDHC: Calculate the applicable mmc erase timeout value
  • From: Haijun Zhang <Haijun.Zhang@xxxxxxxxxxxxx>
• [PATCH 1/2 v2] Powerpc/eSDHC: Calculate the applicable mmc erase timeout value
  • From: Haijun Zhang <Haijun.Zhang@xxxxxxxxxxxxx>
• [PATCH 2/2] Powerpc/eSDHC: Add limit to data and erase timeout value calculation
  • From: Haijun Zhang <Haijun.Zhang@xxxxxxxxxxxxx>
• [PATCH] Powerpc eSDHC: Use u64 to calculate the timeout value to avoid overflow
  • From: Haijun Zhang <Haijun.Zhang@xxxxxxxxxxxxx>
• RE: [PATCH 3/4 v5] SDHCI: add sdhci_get_cd callback to detect the card
  • From: Huang Changming-R66093 <r66093@xxxxxxxxxxxxx>
• Re: [PATCH 3/4 v5] SDHCI: add sdhci_get_cd callback to detect the card
  • From: Anton Vorontsov <cbouatmailru@xxxxxxxxx>
• RE: [PATCH 3/4 v5] SDHCI: add sdhci_get_cd callback to detect the card
  • From: Huang Changming-R66093 <r66093@xxxxxxxxxxxxx>
• Re: [PATCH v6 11/14] mmc: sdhci: fix the bug that DDR50 can't work for emmc
  • From: Kevin Liu <keyuan.liu@xxxxxxxxx>
• RE: [PATCH 2/4 v4] MMC/SD: Add callback function to detect card
  • From: Huang Changming-R66093 <r66093@xxxxxxxxxxxxx>
• Re: [PATCH 2/4 v4] MMC/SD: Add callback function to detect card
  • From: Anton Vorontsov <cbouatmailru@xxxxxxxxx>
• Re: [PATCH 3/4 v5] SDHCI: add sdhci_get_cd callback to detect the card
  • From: Anton Vorontsov <cbouatmailru@xxxxxxxxx>
• Re: [PATCH 4/4 v4] ESDHC: add callback esdhc_of_get_cd to detect card
  • From: Anton Vorontsov <cbouatmailru@xxxxxxxxx>
• RE: [PATCH 4/4 v4] ESDHC: add callback esdhc_of_get_cd to detect card
  • From: Huang Changming-R66093 <r66093@xxxxxxxxxxxxx>
• RE: [PATCH 3/4 v5] SDHCI: add sdhci_get_cd callback to detect the card
  • From: Huang Changming-R66093 <r66093@xxxxxxxxxxxxx>
• RE: [PATCH 2/4 v4] MMC/SD: Add callback function to detect card
  • From: Huang Changming-R66093 <r66093@xxxxxxxxxxxxx>
• Re: [PATCH v6 09/14] mmc: sdhci-pxav3: add quirks2
  • From: Kevin Liu <keyuan.liu@xxxxxxxxx>
• Re: [PATCH 2/2 V2] Powerpc/eSDHC: Add limit to data and erase timeout value calculation
  • From: Anton Vorontsov <cbouatmailru@xxxxxxxxx>
• Re: [PATCH 1/2 V2] Powerpc/eSDHC: Calculate the applicable mmc erase timeout value
  • From: Anton Vorontsov <cbouatmailru@xxxxxxxxx>
• Re: [PATCH] Powerpc eSDHC: Use u64 to calculate the timeout value to avoid overflow
  • From: Anton Vorontsov <cbouatmailru@xxxxxxxxx>
• Re: [PATCH] Powerpc/esdhc: Calculate the applicable timeout value for mmc erase
  • From: Anton Vorontsov <cbouatmailru@xxxxxxxxx>
• Re: UHS-I voltage switching on OLPC XO-1.75
  • From: Philip Rakity <prakity@xxxxxxxxxx>
• [PATCH] mmc: sdhci-s3c: fix missing clock for gpio card-detect
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH] mmc: sdhci-s3c: fix missing clock for gpio card-detect
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH v3] MMC: SD/MMC Host Controller for Wondermedia WM8505/WM8650
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH v3] MMC: SD/MMC Host Controller for Wondermedia WM8505/WM8650
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• Re: UHS-I voltage switching on OLPC XO-1.75
  • From: Daniel Drake <dsd@xxxxxxxxxx>
• Re: [PATCH v3] MMC: SD/MMC Host Controller for Wondermedia WM8505/WM8650
  • From: Chris Ball <cjb@xxxxxxxxxx>
• [PATCH v3] MMC: SD/MMC Host Controller for Wondermedia WM8505/WM8650
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/5] mmc: omap_hsmmc: Few patches for omap_hsmmc
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH v3 0/5] mmc: Add access to RPMB partition
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH v6 13/14] mmc: sdhci: solve several vmmc/vqmmc regulator issues
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH v6 12/14] mmc: sdhci-pxav3: remove set_uhs_signaling function
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH v6 11/14] mmc: sdhci: fix the bug that DDR50 can't work for emmc
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH v6 09/14] mmc: sdhci-pxav3: add quirks2
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH v6 07/14] mmc: host: adjust uhs timing value
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH v6 06/14] mmc: sdhci-pxav3: controller can't get base clock
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH] mmc: Standardise capability type
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH RESEND v2] MMC: SD/MMC Host Controller for Wondermedia WM8505/WM8650
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH] Revert "mmc: sdhci-s3c: Add clk_(enable/disable) in runtime suspend/resume"
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH] dt: Document: Add optional dw_mmc pm bindings
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH V4] Powerpc eSDHC Recover from the ADMA error
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH v2] mmc: mxs-mmc: Remove platform data
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH] mmc: sdio: To use multiple scatter gather list
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: Fwd: [PATCH v3 0/5] mmc: Add access to RPMB partition
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/1] mmc: Bad device can cause mmc driver to hang
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH 1/1] mmc: Bad device can cause mmc driver to hang
  • From: Trey Ramsay <tramsay@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] mmc: Bad device can cause mmc driver to hang
  • From: Trey Ramsay <tramsay@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] mmc: Bad device can cause mmc driver to hang
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH 1/1] mmc: Bad device can cause mmc driver to hang
  • From: Trey Ramsay <tramsay@xxxxxxxxxxxxxxxxxx>
• Re: Fwd: [PATCH v3 1/5] mmc: core: Expose access to RPMB partition
  • From: Krishna Konda <kkonda@xxxxxxxxxxxxxx>
• Re: Fwd: [PATCH v3 2/5] mmc: card: Do not scan RPMB partitions
  • From: Krishna Konda <kkonda@xxxxxxxxxxxxxx>
• Re: Fwd: [PATCH v3 3/5] mmc: core: Extend sysfs to ext_csd parameters for RPMB support
  • From: Krishna Konda <kkonda@xxxxxxxxxxxxxx>
• Re: Fwd: [PATCH v3 4/5] mmc: core: Add mmc_set_blockcount feature
  • From: Krishna Konda <kkonda@xxxxxxxxxxxxxx>
• Re: Fwd: [PATCH v3 5/5] mmc: card: Add RPMB support in IOCTL interface
  • From: Krishna Konda <kkonda@xxxxxxxxxxxxxx>
• Re: Fwd: [PATCH v3 0/5] mmc: Add access to RPMB partition
  • From: Krishna Konda <kkonda@xxxxxxxxxxxxxx>
• Re: [PATCH] mmc,sdio: Fix the panic due to devname NULL when calling pm_runtime_set_active()
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [RFC PATCH v3 02/16] ARM: davinci: move private EDMA API to arm/common
  • From: Matt Porter <mporter@xxxxxx>
• Re: [PATCH 1/1] mmc: Bad device can cause mmc driver to hang
  • From: Chris Ball <cjb@xxxxxxxxxx>
• [PATCH 1/1] mmc: Bad device can cause mmc driver to hang
  • From: Trey Ramsay <tramsay@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/2] mmc: host: sdhci-s3c: Add support for pinctrl
  • From: Tomasz Figa <t.figa@xxxxxxxxxxx>
• [PATCH v2 1/2] mmc: host: sdhci-s3c: Use devm_gpio_request to request GPIOs
  • From: Tomasz Figa <t.figa@xxxxxxxxxxx>
• [PATCH v2 0/2] mmc: host: sdhci-s3c: Add support for pinctrl interface
  • From: Tomasz Figa <t.figa@xxxxxxxxxxx>
• Re: [RFC PATCH 3.7.0-rc4 2/4] mm:exynos: use of_simple_module_id_table macro.
  • From: Srinivas KANDAGATLA <srinivas.kandagatla@xxxxxx>
• Re: [RFC PATCH 3.7.0-rc4 2/4] mm:exynos: use of_simple_module_id_table macro.
  • From: Girish K S <girish.shivananjappa@xxxxxxxxxx>
• [RFC RESEND PATCH 3.7.0-rc4 4/4] mmc:shmobile: use of_simple_module_id_table macro.
  • From: Srinivas KANDAGATLA <srinivas.kandagatla@xxxxxx>
• [RFC RESEND PATCH 3.7.0-rc4 3/4] mmc:sdhci-spear: use of_simple_module_id_table macro.
  • From: Srinivas KANDAGATLA <srinivas.kandagatla@xxxxxx>
• [RFC RESEND PATCH 3.7.0-rc4 2/4] mmc:exynos: use of_simple_module_id_table macro.
  • From: Srinivas KANDAGATLA <srinivas.kandagatla@xxxxxx>
• [RFC RESEND PATCH 3.7.0-rc4 1/4] of: introduce of_simple_module_id_table macro.
  • From: Srinivas KANDAGATLA <srinivas.kandagatla@xxxxxx>
• [RFC RESEND PATCH 3.7.0-rc4 0/4] introduce of_simple_module_id_table macro
  • From: Srinivas KANDAGATLA <srinivas.kandagatla@xxxxxx>
• [RFC PATCH 3.7.0-rc4 4/4] mm:shmobile: use of_simple_module_id_table macro.
  • From: Srinivas KANDAGATLA <srinivas.kandagatla@xxxxxx>
• [RFC PATCH 3.7.0-rc4 3/4] mm:sdhci-spear: use of_simple_module_id_table macro.
  • From: Srinivas KANDAGATLA <srinivas.kandagatla@xxxxxx>
• [RFC PATCH 3.7.0-rc4 2/4] mm:exynos: use of_simple_module_id_table macro.
  • From: Srinivas KANDAGATLA <srinivas.kandagatla@xxxxxx>
• [RFC PATCH 3.7.0-rc4 1/4] of: introduce of_simple_module_id_table macro.
  • From: Srinivas KANDAGATLA <srinivas.kandagatla@xxxxxx>
• [RFC PATCH 3.7.0-rc4 0/4] introduce of_simple_module_id_table macro
  • From: Srinivas KANDAGATLA <srinivas.kandagatla@xxxxxx>
• [PATCH] mmc,sdio: Fix the panic due to devname NULL when calling pm_runtime_set_active()
  • From: Chuansheng Liu <chuansheng.liu@xxxxxxxxx>
• [PATCH] mmc: Limit MMC speed to 52MHz if not HS200
  • From: "Al Cooper" <alcooperx@xxxxxxxxx>
• Re: [PATCH v1] mmc: fix async request mechanism for sequential read scenarios
  • From: Per Förlin <per.forlin@xxxxxxxxxxxxxx>
• Re: [PATCH] mmc: Standardise capability type
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] mmc: Standardise capability type
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• RE: [PATCH v3] mmc: fix async request mechanism for sequential read scenarios
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• RE: [PATCH v8 2/2] mmc: support packed write command for eMMC4.5 device
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• 32kHz clock removal causes problems omap_hsmmc
  • From: Luciano Coelho <coelho@xxxxxx>
• [PATCH] mmc: sdhci: check the quirk HISPD_BIT for SD3.0 card
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• Re: Fwd: [PATCH v3 0/5] mmc: Add access to RPMB partition
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: Fwd: [PATCH v3 0/5] mmc: Add access to RPMB partition
  • From: Krishna Konda <kkonda@xxxxxxxxxxxxxx>
• Re: [PATCH v1] mmc: fix async request mechanism for sequential read scenarios
  • From: Konstantin Dorfman <kdorfman@xxxxxxxxxxxxxx>
• [PATCH] mmc: Standardise capability type
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2] mmc: sdhci: apply voltage range check only for non-fixed regulators
  • From: Kevin Liu <keyuan.liu@xxxxxxxxx>
• Re: [PATCH v2] mmc: sdhci: apply voltage range check only for non-fixed regulators
  • From: Philip Rakity <prakity@xxxxxxxxxx>
• Re: FW: [PATCH v2] mmc: sdhci: apply voltage range check only for non-fixed regulators
  • From: Kevin Liu <keyuan.liu@xxxxxxxxx>
• Re: FW: [PATCH v2] mmc: sdhci: apply voltage range check only for non-fixed regulators
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: FW: [PATCH v2] mmc: sdhci: apply voltage range check only for non-fixed regulators
  • From: Kevin Liu <keyuan.liu@xxxxxxxxx>
• Re: [PATCH v8 2/2] mmc: support packed write command for eMMC4.5 device
  • From: merez@xxxxxxxxxxxxxx
• Re: FW: [PATCH v2] mmc: sdhci: apply voltage range check only for non-fixed regulators
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: FW: [PATCH v2] mmc: sdhci: apply voltage range check only for non-fixed regulators
  • From: Kevin Liu <keyuan.liu@xxxxxxxxx>
• Re: [PATCH v8 2/2] mmc: support packed write command for eMMC4.5 device
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH v3] regulator: treat regulators with constant volatage as fixed
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 05/14] mmc: sdhci: fix null return check of regulator_get
  • From: Haojian Zhuang <haojian.zhuang@xxxxxxxxx>
• Re: [PATCH 3/3] mmc: sdhci: apply voltage range check only for non-fixed regulators
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] mmc: sdhci: apply voltage range check only for non-fixed regulators
  • From: Philip Rakity <prakity@xxxxxxxxxx>
• Re: [PATCH v1] mmc: fix async request mechanism for sequential read scenarios
  • From: Per Forlin <per.lkml@xxxxxxxxx>
• Re: drivers/mmc/card/block.c infinite loop in mmc_blk_err_check waiting on R1_READY_FOR_DATA
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH v2] mmc: sdhci: apply voltage range check only for non-fixed regulators
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH v2] mmc: sdhci: apply voltage range check only for non-fixed regulators
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH v2] mmc: sdhci: apply voltage range check only for non-fixed regulators
  • From: Chris Ball <cjb@xxxxxxxxxx>
• RE: [PATCH v3] mmc: fix async request mechanism for sequential read scenarios
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• [PATCH v2] mmc: sdhci: apply voltage range check only for non-fixed regulators
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH 3/3] mmc: sdhci: apply voltage range check only for non-fixed regulators
  • From: Chris Ball <cjb@xxxxxxxxxx>
• [PATCH 2/2] mmc: host: sdhci-s3c: Add support for pinctrl
  • From: Tomasz Figa <t.figa@xxxxxxxxxxx>
• [PATCH 1/2] mmc: host: sdhci-s3c: Use devm_gpio_request to request GPIOs
  • From: Tomasz Figa <t.figa@xxxxxxxxxxx>
• [PATCH 0/2] mmc: host: sdhci-s3c: Add support for pinctrl interface
  • From: Tomasz Figa <t.figa@xxxxxxxxxxx>
• [PATCH v3] regulator: treat regulators with constant volatage as fixed
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH v2] regulator: treat regulators with constant volatage as fixed
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2] regulator: treat regulators with constant volatage as fixed
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH 1/2 V2] Powerpc/eSDHC: Calculate the applicable mmc erase timeout value
  • From: Haijun Zhang <Haijun.Zhang@xxxxxxxxxxxxx>
• [PATCH 2/2 V2] Powerpc/eSDHC: Add limit to data and erase timeout value calculation
  • From: Haijun Zhang <Haijun.Zhang@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] regulator: fix voltage check in regulator_is_supported_voltage()
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] regulator: threat regulators with constant volatage as fixed
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/3] regulator: fix voltage check in regulator_is_supported_voltage()
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH 2/3] regulator: threat regulators with constant volatage as fixed
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH 3/3] mmc: sdhci: apply voltage range check only for non-fixed regulators
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH 0/3] Fix fixed regulators support
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• RE: [PATCH 2/4 v4] MMC/SD: Add callback function to detect card
  • From: Huang Changming-R66093 <r66093@xxxxxxxxxxxxx>
• RE: [PATCH V4] Powerpc eSDHC Recover from the ADMA error
  • From: Huang Changming-R66093 <r66093@xxxxxxxxxxxxx>
• Re: [PATCH v6 05/14] mmc: sdhci: fix null return check of regulator_get
  • From: Kevin Liu <keyuan.liu@xxxxxxxxx>
• Re: [PATCH] mmc: hsmmc: Fix NULL pointer dereference on unload when booted with device tree
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v3] mmc: fix async request mechanism for sequential read scenarios
  • From: Konstantin Dorfman <kdorfman@xxxxxxxxxxxxxx>
• Re: [PATCH 02/10] arm: at91: move platfarm_data to include/linux/platform_data/atmel.h
  • From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
• Re: [PATCH] mmc: hsmmc: Fix NULL pointer dereference on unload when booted with device tree
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH v3 0/3] mmc: omap_hsmmc: fixes for irq error handler
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH v3 3/3] mmc: omap_hsmmc: update error code for response_busy cmd
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH v3 2/3] mmc: omap_hsmmc: no reset of cmd state machine for DCRC
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH v3 1/3] mmc: omap_hsmmc: Fix Oops in case of data errors
  • From: Balaji T K <balajitk@xxxxxx>
• Re: [PATCH v2] mmc: fix async request mechanism for sequential read scenarios
  • From: Konstantin Dorfman <kdorfman@xxxxxxxxxxxxxx>
• Re: [PATCH v2] mmc: fix async request mechanism for sequential read scenarios
  • From: Konstantin Dorfman <kdorfman@xxxxxxxxxxxxxx>
• Re: [PATCH v2] mmc: fix async request mechanism for sequential read scenarios
  • From: Konstantin Dorfman <kdorfman@xxxxxxxxxxxxxx>
• Re: [PATCH v6 05/14] mmc: sdhci: fix null return check of regulator_get
  • From: Kevin Liu <keyuan.liu@xxxxxxxxx>
• Re: [PATCH 0/8] Fix coding style in sdhci.c
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH 0/8] Fix coding style in sdhci.c
  • From: Tushar Behera <tushar.behera@xxxxxxxxxx>
• Re: [PATCH 0/8] Fix coding style in sdhci.c
  • From: Chris Ball <cjb@xxxxxxxxxx>
• [PATCH] Powerpc eSDHC: Use u64 to calculate the timeout value to avoid overflow
  • From: Haijun Zhang <Haijun.Zhang@xxxxxxxxxxxxx>
• Re: [PATCH 0/8] Fix coding style in sdhci.c
  • From: Tushar Behera <tushar.behera@xxxxxxxxxx>
• Re: [PATCH 0/8] Fix coding style in sdhci.c
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• Re: [PATCH v7 0/3] Add modules to support realtek PCIE card reader
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] mmc: core: Add support for idle time BKOPS
  • From: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>
• Re: [PATCH 02/10] arm: at91: move platfarm_data to include/linux/platform_data/atmel.h
  • From: Joachim Eastwood <manabian@xxxxxxxxx>
• Re: [PATCH 02/10] arm: at91: move platfarm_data to include/linux/platform_data/atmel.h
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH] mmc: hsmmc: Fix NULL pointer dereference on unload when booted with device tree
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 3/3] mmc: omap_hsmmc: update error code for response_busy cmd
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 2/3] mmc: omap_hsmmc: no reset of cmd state machine for DCRC
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 1/3] mmc: omap_hsmmc: Fix Oops in case of data errors
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2 1/3] mmc: omap_hsmmc: Fix Oops in case of data errors
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH v2 2/3] mmc: omap_hsmmc: no reset of cmd state machine for DCRC
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH v2 3/3] mmc: omap_hsmmc: update error code for response_busy cmd
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH v2 0/3] mmc: omap_hsmmc: fixes for irq error handler
  • From: Balaji T K <balajitk@xxxxxx>
• Re: [PATCH 1/5] mmc: omap_hsmmc: Avoid host->cmd dereference during data transfer failures
  • From: Balaji T K <balajitk@xxxxxx>
• Re: [PATCH v7 0/3] Add modules to support realtek PCIE card reader
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH] dma: add new DMA control commands
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• Re: [PATCH] mmc: omap_hsmmc: Fix Oops in case of data errors
  • From: Balaji T K <balajitk@xxxxxx>
• Re: [PATCH v7 0/3] Add modules to support realtek PCIE card reader
  • From: wwang <wei_wang@xxxxxxxxxxxxxx>
• Re: [PATCH] mmc: omap_hsmmc: Fix Oops in case of data errors
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] mmc: omap_hsmmc: Fix Oops in case of data errors
  • From: Balaji T K <balajitk@xxxxxx>
• [GIT PULL] MMC fixes for 3.7-rc5
  • From: Chris Ball <cjb@xxxxxxxxxx>
• [PATCH 1/8] mmc: sdhci: fix coding style in sdhci_calc_timeout
  • From: Tushar Behera <tushar.behera@xxxxxxxxxx>
• [PATCH 2/8] mmc: sdhci: fix coding style in sdhci_set_transfer_mode
  • From: Tushar Behera <tushar.behera@xxxxxxxxxx>
• [PATCH 3/8] mmc: sdhci: fix coding style in sdhci_finish_data
  • From: Tushar Behera <tushar.behera@xxxxxxxxxx>
• [PATCH 4/8] mmc: sdhci: fix coding style in sdhci_set_clock
  • From: Tushar Behera <tushar.behera@xxxxxxxxxx>
• [PATCH 6/8] mmc: sdhci: fix coding style in sdhci_execute_tuning
  • From: Tushar Behera <tushar.behera@xxxxxxxxxx>
• [PATCH 7/8] mmc: sdhci: fix coding style in sdhci_data_irq
  • From: Tushar Behera <tushar.behera@xxxxxxxxxx>
• [PATCH 8/8] mmc: sdhci: fix coding style in sdhci_add_host
  • From: Tushar Behera <tushar.behera@xxxxxxxxxx>