As some mmc cards need large timeout value usually a few seconds,
so data timeout nanosecond will overflow with u32 variable and
give the wrong timeout value, so use u64 will be safe.
Signed-off-by: Jerry Huang <Chang-Ming.Huang@xxxxxxxxxxxxx>
Signed-off-by: Haijun Zhang <Haijun.Zhang@xxxxxxxxxxxxx>
Signed-off-by: Anton Vorontsov <cbouatmailru@xxxxxxxxx>
---
drivers/mmc/core/core.c | 21 ++++++++-------------
drivers/mmc/host/sdhci.c | 6 +++---
include/linux/mmc/core.h | 2 +-
3 files changed, 12 insertions(+), 17 deletions(-)
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 06c42cf..893144e 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -208,10 +208,10 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
if (mrq->data) {
pr_debug("%s: blksz %d blocks %d flags %08x "
- "tsac %d ms nsac %d\n",
+ "tsac %lld ms nsac %d\n",
mmc_hostname(host), mrq->data->blksz,
mrq->data->blocks, mrq->data->flags,
- mrq->data->timeout_ns / 1000000,
+ div_u64(mrq->data->timeout_ns, 1000000),
mrq->data->timeout_clks);
}
@@ -659,16 +659,16 @@ void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card)
if (data->flags & MMC_DATA_WRITE)
mult <<= card->csd.r2w_factor;
- data->timeout_ns = card->csd.tacc_ns * mult;
+ data->timeout_ns = (u64)card->csd.tacc_ns * mult;
data->timeout_clks = card->csd.tacc_clks * mult;
/*
* SD cards also have an upper limit on the timeout.
*/
if (mmc_card_sd(card)) {
- unsigned int timeout_us, limit_us;
+ u64 timeout_us, limit_us;
- timeout_us = data->timeout_ns / 1000;
+ timeout_us = div_u64(data->timeout_ns, 1000);
if (mmc_host_clk_rate(card->host))
timeout_us += data->timeout_clks * 1000 /
(mmc_host_clk_rate(card->host) / 1000);
@@ -1545,14 +1545,9 @@ static unsigned int mmc_mmc_erase_timeout(struct mmc_card *card,
/* CSD Erase Group Size uses write timeout */
unsigned int mult = (10 << card->csd.r2w_factor);
unsigned int timeout_clks = card->csd.tacc_clks * mult;
- unsigned int timeout_us;
-
- /* Avoid overflow: e.g. tacc_ns=80000000 mult=1280 */
- if (card->csd.tacc_ns < 1000000)
- timeout_us = (card->csd.tacc_ns * mult) / 1000;
- else
- timeout_us = (card->csd.tacc_ns / 1000) * mult;
+ u64 timeout_us;
+ timeout_us = (u64)(card->csd.tacc_ns / 1000) * mult;
/*
* ios.clock is only a target. The real clock rate might be
* less but not that much less, so fudge it by multiplying by 2.
@@ -1561,7 +1556,7 @@ static unsigned int mmc_mmc_erase_timeout(struct mmc_card *card,
timeout_us += (timeout_clks * 1000) /
(mmc_host_clk_rate(card->host) / 1000);
- erase_timeout = timeout_us / 1000;
+ erase_timeout = div_u64(timeout_us, 1000);
/*
* Theoretically, the calculation could underflow so round up
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index f05a377..a5adc9f 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -651,7 +651,7 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd)
{
u8 count;
struct mmc_data *data = cmd->data;
- unsigned target_timeout, current_timeout;
+ u64 target_timeout, current_timeout;
/*
* If the host controller provides us with an incorrect timeout
@@ -668,9 +668,9 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd)
/* timeout in us */
if (!data)
- target_timeout = cmd->cmd_timeout_ms * 1000;
+ target_timeout = (u64)cmd->cmd_timeout_ms * 1000;
else {
- target_timeout = data->timeout_ns / 1000;
+ target_timeout = div_u64(data->timeout_ns, 1000);
if (host->clock)
target_timeout += data->timeout_clks / host->clock;
}
diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
index 9b9cdaf..a2ff2e9 100644
--- a/include/linux/mmc/core.h
+++ b/include/linux/mmc/core.h
@@ -99,7 +99,7 @@ struct mmc_command {
};
struct mmc_data {
- unsigned int timeout_ns; /* data timeout (in ns, max 80ms) */
+ u64 timeout_ns; /* data timeout (in ns) */
unsigned int timeout_clks; /* data timeout (in clocks) */
unsigned int blksz; /* data block size */
unsigned int blocks; /* number of blocks */
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
