On Sun, Oct 28, 2012 at 01:47:09PM +0530, Sekhar Nori wrote:
> On 10/18/2012 6:56 PM, Matt Porter wrote:
> > Move mach-davinci/dma.c to common/edma.c so it can be used
> > by OMAP (specifically AM33xx) as well. This just moves the
> > private EDMA API but does not support OMAP.
> >
> > Signed-off-by: Matt Porter <mporter@xxxxxx>
> > ---
>
> > diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
> > index 4c48a36..f45d591 100644
> > --- a/arch/arm/mach-davinci/devices.c
> > +++ b/arch/arm/mach-davinci/devices.c
> > @@ -19,9 +19,10 @@
> > #include <mach/irqs.h>
> > #include <mach/cputype.h>
> > #include <mach/mux.h>
> > -#include <mach/edma.h>
> > #include <linux/platform_data/mmc-davinci.h>
> > #include <mach/time.h>
> > +#include <linux/platform_data/edma.h>
>
> Can you please introduce a patch to clean this mixture of linux/ and
> mach/ includes?
Sure.
>
> > +
> >
> > #include "davinci.h"
> > #include "clock.h"
> > @@ -141,10 +142,10 @@ static struct resource mmcsd0_resources[] = {
> > },
> > /* DMA channels: RX, then TX */
> > {
> > - .start = EDMA_CTLR_CHAN(0, DAVINCI_DMA_MMCRXEVT),
> > + .start = EDMA_CTLR_CHAN(0, 26),
>
> Instead of just replacing the event #defines with plain numbers, can you
> introduce a mach-davinci local edma.h which can then be included in the
> davinci platform files which refer to edma channel numbers?
Yes.
> > diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
> > index 7cd56ed..153fab8 100644
> > --- a/arch/arm/plat-omap/Kconfig
> > +++ b/arch/arm/plat-omap/Kconfig
> > @@ -28,6 +28,7 @@ config ARCH_OMAP2PLUS
> > select OMAP_DM_TIMER
> > select PROC_DEVICETREE if PROC_FS
> > select SPARSE_IRQ
> > + select TI_PRIV_EDMA
>
> This hunk does not seem to belong to subject of this patch.
Yep, stray hunk..will move to the am335x enablement.
> > select USE_OF
> > help
> > "Systems based on OMAP2, OMAP3, OMAP4 or OMAP5"
>
> > diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h
> > new file mode 100644
> > index 0000000..7396f0b3
> > --- /dev/null
> > +++ b/include/linux/platform_data/edma.h
> > @@ -0,0 +1,198 @@
> > +/*
> > + * TI DAVINCI dma definitions
> > + *
> > + * Copyright (C) 2006-2009 Texas Instruments.
> > + *
> > + * This program is free software; you can redistribute it and/or modify it
> > + * under the terms of the GNU General Public License as published by the
> > + * Free Software Foundation; either version 2 of the License, or (at your
> > + * option) any later version.
> > + *
> > + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
> > + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
> > + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
> > + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
> > + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> > + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
> > + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
> > + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> > + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
> > + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
>
> > + * You should have received a copy of the GNU General Public License along
> > + * with this program; if not, write to the Free Software Foundation, Inc.,
> > + * 675 Mass Ave, Cambridge, MA 02139, USA.
>
> This part can be dropped, I suppose ;-)
Ok :)
-Matt
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
