On 11:54 Sat 10 Nov , Joachim Eastwood wrote: > Hi Jean-Christophe, > > On 7 November 2012 12:22, Jean-Christophe PLAGNIOL-VILLARD > <plagnioj@xxxxxxxxxxxx> wrote: > > Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx> > > Cc: Nicolas Ferre <nicolas.ferre@xxxxxxxxx> > > Cc: linux-ide@xxxxxxxxxxxxxxx > > Cc: linux-input@xxxxxxxxxxxxxxx > > Cc: linux-mmc@xxxxxxxxxxxxxxx > > Cc: linux-can@xxxxxxxxxxxxxxx > > Cc: netdev@xxxxxxxxxxxxxxx > > Cc: linux-pcmcia@xxxxxxxxxxxxxxxxxxx > > Cc: rtc-linux@xxxxxxxxxxxxxxxx > > Cc: spi-devel-general@xxxxxxxxxxxxxxxxxxxxx > > Cc: linux-serial@xxxxxxxxxxxxxxx > > Cc: linux-usb@xxxxxxxxxxxxxxx > > Cc: linux-fbdev@xxxxxxxxxxxxxxx > > --- > > HI all, > > > > If it's ok with everyone this will go via at91 > > with the patch serie than clean up the include/mach > > > > For preparation to switch to arm multiarch kernel > > > > Best Regards, > > J. > > arch/arm/mach-at91/include/mach/board.h | 55 ---------------------- > > arch/avr32/mach-at32ap/include/mach/board.h | 7 --- > > drivers/ata/pata_at91.c | 2 +- > > drivers/input/touchscreen/atmel_tsadcc.c | 2 +- > > drivers/mmc/host/atmel-mci.c | 2 +- > > drivers/net/can/at91_can.c | 3 +- > > drivers/net/ethernet/cadence/at91_ether.c | 2 +- > > drivers/pcmcia/at91_cf.c | 2 +- > > drivers/rtc/rtc-at91sam9.c | 2 +- > > drivers/spi/spi-atmel.c | 2 +- > > drivers/tty/serial/atmel_serial.c | 2 +- > > drivers/usb/gadget/at91_udc.c | 2 +- > > drivers/usb/gadget/atmel_usba_udc.c | 2 +- > > drivers/usb/host/ohci-at91.c | 2 +- > > drivers/video/atmel_lcdfb.c | 2 +- > > include/linux/platform_data/atmel.h | 67 +++++++++++++++++++++++++++ > > 16 files changed, 80 insertions(+), 76 deletions(-) > > <snip> > > > diff --git a/drivers/net/ethernet/cadence/at91_ether.c b/drivers/net/ethernet/cadence/at91_ether.c > > index 4e980a7..35fc6edb 100644 > > --- a/drivers/net/ethernet/cadence/at91_ether.c > > +++ b/drivers/net/ethernet/cadence/at91_ether.c > > @@ -31,6 +31,7 @@ > > #include <linux/clk.h> > > #include <linux/gfp.h> > > #include <linux/phy.h> > > +#include <linux/platform_data/atmel.h> > > > > #include <asm/io.h> > > #include <asm/uaccess.h> > > @@ -38,7 +39,6 @@ > > > > #include <mach/at91rm9200_emac.h> > > #include <asm/gpio.h> > > -#include <mach/board.h> > > > > #include "at91_ether.h" > > The at91_ether driver in net-next does not need to be change since it > all mach includes has already been removed by other patches and it > includes linux/platform_data/macb.h directly. > > What tree was these patches based on? > The at91_ether driver changes has been in linux-next for a long while now. the conflict is minor easy to handle and the cleanup need to go first on arm soc so this is based on rc3 Best Regards, J. -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
