Hi Jean-Christophe, On 7 November 2012 12:22, Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx> wrote: > Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx> > Cc: Nicolas Ferre <nicolas.ferre@xxxxxxxxx> > Cc: linux-ide@xxxxxxxxxxxxxxx > Cc: linux-input@xxxxxxxxxxxxxxx > Cc: linux-mmc@xxxxxxxxxxxxxxx > Cc: linux-can@xxxxxxxxxxxxxxx > Cc: netdev@xxxxxxxxxxxxxxx > Cc: linux-pcmcia@xxxxxxxxxxxxxxxxxxx > Cc: rtc-linux@xxxxxxxxxxxxxxxx > Cc: spi-devel-general@xxxxxxxxxxxxxxxxxxxxx > Cc: linux-serial@xxxxxxxxxxxxxxx > Cc: linux-usb@xxxxxxxxxxxxxxx > Cc: linux-fbdev@xxxxxxxxxxxxxxx > --- > HI all, > > If it's ok with everyone this will go via at91 > with the patch serie than clean up the include/mach > > For preparation to switch to arm multiarch kernel > > Best Regards, > J. > arch/arm/mach-at91/include/mach/board.h | 55 ---------------------- > arch/avr32/mach-at32ap/include/mach/board.h | 7 --- > drivers/ata/pata_at91.c | 2 +- > drivers/input/touchscreen/atmel_tsadcc.c | 2 +- > drivers/mmc/host/atmel-mci.c | 2 +- > drivers/net/can/at91_can.c | 3 +- > drivers/net/ethernet/cadence/at91_ether.c | 2 +- > drivers/pcmcia/at91_cf.c | 2 +- > drivers/rtc/rtc-at91sam9.c | 2 +- > drivers/spi/spi-atmel.c | 2 +- > drivers/tty/serial/atmel_serial.c | 2 +- > drivers/usb/gadget/at91_udc.c | 2 +- > drivers/usb/gadget/atmel_usba_udc.c | 2 +- > drivers/usb/host/ohci-at91.c | 2 +- > drivers/video/atmel_lcdfb.c | 2 +- > include/linux/platform_data/atmel.h | 67 +++++++++++++++++++++++++++ > 16 files changed, 80 insertions(+), 76 deletions(-) <snip> > diff --git a/drivers/net/ethernet/cadence/at91_ether.c b/drivers/net/ethernet/cadence/at91_ether.c > index 4e980a7..35fc6edb 100644 > --- a/drivers/net/ethernet/cadence/at91_ether.c > +++ b/drivers/net/ethernet/cadence/at91_ether.c > @@ -31,6 +31,7 @@ > #include <linux/clk.h> > #include <linux/gfp.h> > #include <linux/phy.h> > +#include <linux/platform_data/atmel.h> > > #include <asm/io.h> > #include <asm/uaccess.h> > @@ -38,7 +39,6 @@ > > #include <mach/at91rm9200_emac.h> > #include <asm/gpio.h> > -#include <mach/board.h> > > #include "at91_ether.h" The at91_ether driver in net-next does not need to be change since it all mach includes has already been removed by other patches and it includes linux/platform_data/macb.h directly. What tree was these patches based on? The at91_ether driver changes has been in linux-next for a long while now. regards Joachim Eastwood -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
