On Thu, Nov 22, 2012 at 06:28:30PM +0100, Per Forlin wrote:
> On Wed, Nov 21, 2012 at 5:50 PM, Russell King - ARM Linux
> <linux@xxxxxxxxxxxxxxxx> wrote:
> > On Wed, Nov 21, 2012 at 05:13:55PM +0100, Per Forlin wrote:
> >> On Wed, Nov 21, 2012 at 4:38 PM, Russell King - ARM Linux
> >> <linux@xxxxxxxxxxxxxxxx> wrote:
> >> > On Fri, Oct 12, 2012 at 04:02:02PM +0200, Ulf Hansson wrote:
> >> >> /*
> >> >> + * Validate mmc prerequisites
> >> >> + */
> >> >> +static int mmci_validate_data(struct mmci_host *host,
> >> >> + struct mmc_data *data)
> >> >> +{
> >> >> + if (!data)
> >> >> + return 0;
> >> >> +
> >> >> + if (!host->variant->non_power_of_2_blksize &&
> >> >> + !is_power_of_2(data->blksz)) {
> >> >> + dev_err(mmc_dev(host->mmc),
> >> >> + "unsupported block size (%d bytes)\n", data->blksz);
> >> >> + return -EINVAL;
> >> >> + }
> >> >> +
> >> >> + if (data->sg->offset & 3) {
> >> >> + dev_err(mmc_dev(host->mmc),
> >> >> + "unsupported alginment (0x%x)\n", data->sg->offset);
> >> >> + return -EINVAL;
> >> >> + }
> >> >
> >> > Why? What's the reasoning behind this suddenly introduced restriction?
> >> > readsl()/writesl() copes just fine with non-aligned pointers. It may be
> >> > that your DMA engine can not, but that's no business interfering with
> >> > non-DMA transfers, and no reason to fail such transfers.
> >> >
> >> > If your DMA engine can't do that then its your DMA engine code which
> >> > should refuse to prepare the transfer.
> >> >
> >> > Yes, that means problems with the way things are ordered - or it needs a
> >> > proper API where DMA engine can export these kinds of properties.
> >> The alignment constraint is related to PIO, sg_miter and that FIFO
> >> access must be done with 4 bytes.
> >
> > Total claptrap. No it isn't.
> >
> > - sg_miter just deals with bytes, and number of bytes transferred; there
> > is no word assumptions in that code. Indeed many ATA disks transfer
> > by half-word accesses so such a restriction would be insane.
> >
> > - the FIFO access itself needs to be 32-bit words, so readsl or writesl
> > (or their io* equivalents must be used).
> >
> > - but - and this is the killer item to your argument as I said above -
> > readsl and writesl _can_ take misaligned pointers and cope with them
> > fine.
> >
> > The actual alignment of the buffer address is totally irrelevant here.
> >
> > What isn't irrelevant is the _number_ of bytes to be transferred, but
> > that's something totally different and completely unrelated from
> > data->sg->offset.
> Let's try again :)
>
> Keep in mind that the mmc -block layer is aligned so from that aspect
> everything is fine.
> SDIO may have any length or alignment but sg-len is always 1.
>
> There is just one sg-element and one continues buffer.
>
> sg-miter splits the continues buffer in chunks that may not be aligned
> with 4 byte size. It depends on the start address alignment of the
> buffer.
>
> Is it more clear now?
Is this more clear: you may be passed a single buffer which is misaligned.
We cope with that just fine. There is *no* reason to reject that transfer
because readsl/writesl cope just fine with it.
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
