Linux LEDS Development
[Prev Page][Next Page]
- Re: In kernel virtual HID devices (was Future handling of complex RGB devices on Linux v3), (continued)
- [PATCH v4 1/2] dt-bindings: backlight: Add MPS MP3309C,
Flavio Suligoi
- [PATCH v4 2/2] backlight: mp3309c: Add support for MPS MP3309C, Flavio Suligoi
- [PATCH 6/7] fs/sysfs/group: make attribute_group pointers const,
Max Kellermann
- [PATCH] leds: core: Add more colors from DT bindings to led_colors,
Ondřej Jirman
- [PATCH] dt-bindings: leds: Last color id is now 14 (LED_COLOR_ID_LIME),
Ondřej Jirman
- [net PATCH] leds: trigger: netdev: move size check in set_device_name,
Christian Marangi
- [PATCH v1 00/11] leds: aw200xx: several driver updates,
Dmitry Rokosov
- [PATCH v1 10/11] leds: aw200xx: add support for aw20108 device, Dmitry Rokosov
- [PATCH v1 08/11] leds: aw200xx: enable disable_locking flag in regmap config, Dmitry Rokosov
- [PATCH v1 09/11] leds: aw200xx: improve autodim calculation method, Dmitry Rokosov
- [PATCH v1 04/11] dt-bindings: leds: aw200xx: introduce optional hwen-gpio property, Dmitry Rokosov
- [PATCH v1 07/11] leds: aw200xx: add delay after software reset, Dmitry Rokosov
- [PATCH v1 01/11] leds: aw200xx: fix write to DIM parameter, Dmitry Rokosov
- [PATCH v1 06/11] dt-bindings: leds: aw200xx: remove property "awinic,display-rows", Dmitry Rokosov
- [PATCH v1 05/11] leds: aw200xx: calculate dts property display_rows in driver, Dmitry Rokosov
- [PATCH v1 03/11] leds: aw200xx: support HWEN hardware control, Dmitry Rokosov
- [PATCH v1 02/11] dt-bindings: leds: aw200xx: fix led dt node pattern, Dmitry Rokosov
- [PATCH v1 11/11] dt-bindings: leds: Add binding for AW20108 led driver, Dmitry Rokosov
- [lee-leds:for-leds-next] BUILD SUCCESS ed84d55d5115455d17fa93f63dbf89697a309d6e, kernel test robot
- [PATCH 0/2] Kinetic KTD2801 backlight driver,
Duje Mihanović
- Proposal to add one "configured" property to indicate whether LED has been configured, Jack Chen
- [PATCH v6 0/2] leds: Add a driver for KTD202x,
André Apitzsch
- [PATCH v1 1/1] leds: tca6507: Don't use fixed GPIO base,
Andy Shevchenko
- [PATCH v5 0/2] leds: Add a driver for KTD202x,
André Apitzsch
- [PATCH v3 0/2] Match data improvements for pca955x driver,
Biju Das
- [PATCH 0/4] leds: Convert to use maple tree register cache,
Mark Brown
- [PATCH v5 0/7] Add support for LUT PPG,
Anjelique Melendez
- [PATCH v2 0/4] ledtrig-tty: add new state evaluation,
Florian Eckert
- [PATCH v2 0/3] Rewrite GPIO LED trigger to use trigger-sources,
Linus Walleij
- [PATCH 0/2] ledtrig-tty: add new state evaluation,
Florian Eckert
- [PATCH v3 1/2] dt-bindings: backlight: Add MPS MP3309C,
Flavio Suligoi
- [PATCH V2] leds: sc27xx: Move mutex_init() to the end of probe,
Chunyan Zhang
- [PATCH v2 0/2] Match data improvements for pca955x driver,
Biju Das
- [PATCH v4 0/2] leds: Add a driver for KTD202x,
André Apitzsch
- [PATCH] leds: trigger: ledtrig-cpu:: Fix a warning when compiling with W=1,
Christophe JAILLET
- [lee-leds:for-leds-next] BUILD SUCCESS 685f192b3a0a80af8000cb90692bd4ef7bc6f7f9, kernel test robot
- [PATCH v2] leds: pwm: Don't disable the PWM when the LED should be off,
Uwe Kleine-König
- [PATCH] leds: lp3952: replace deprecated strncpy with strscpy,
Justin Stitt
- [PATCH] leds: pwm: Don't disable the PWM when the LED should be off,
Uwe Kleine-König
- [lee-leds:leds-fixes] BUILD SUCCESS 9dc1664fab2246bc2c3e9bf2cf21518a857f9b5b, kernel test robot
- [PATCH] leds: turris-omnia: Fix unused variable,
Marek Behún
- [lee-leds:for-leds-next 53/56] drivers/leds/leds-turris-omnia.c:47:13: warning: unused variable 'ret', kernel test robot
- [PATCH v4] leds: max5970: Add support for max5970,
Naresh Solanki
- [PATCH] leds: sc27xx: Add a missing mutex_destory(),
Chunyan Zhang
- [PATCH v2] dt-bindings: mfd: armltd: Move Arm board syscon's to separate schema, Rob Herring
- [PATCH] leds: Drop BUG_ON check for LED_COLOR_ID_MULTI,
Marek Behún
- [PATCH v4 0/4] leds: turris-omnia: updates,
Marek Behún
- [PATCH] leds: lp55xx: use gpiod_set_value_cansleep,
Stefan Eichenberger
- [PATCH] leds: Convert all platform drivers to return void,
Uwe Kleine-König
- [PATCH] schemas: gpio: Add trigger-source-cells, Linus Walleij
- [PATCH v2] leds: simatic-ipc-leds-gpio: Convert to platform remove callback returning void,
Uwe Kleine-König
- [PATCH] leds: mt6370: Annotate struct mt6370_priv with __counted_by,
Kees Cook
- [PATCH] leds: gpio: Annotate struct gpio_leds_priv with __counted_by,
Kees Cook
- [PATCH] leds: cr0014114: Annotate struct cr0014114 with __counted_by,
Kees Cook
- [PATCH] leds: qcom-lpg: Annotate struct lpg_led with __counted_by,
Kees Cook
- [PATCH] leds: lm3697: Annotate struct lm3697 with __counted_by,
Kees Cook
- [PATCH] leds: aw200xx: Annotate struct aw200xx with __counted_by,
Kees Cook
- [PATCH] leds: el15203000: Annotate struct el15203000 with __counted_by,
Kees Cook
- [PATCH] leds: mt6360: Annotate struct mt6360_priv with __counted_by,
Kees Cook
- [PATCH v2 1/2] dt-bindings: backlight: Add MPS MP3309C,
Flavio Suligoi
- [PATCH V6 0/3] Add support control UP board CPLD/FPGA pin control,
larry.lai
- linux-stable 6.1.53 kernel crash on COLOR_ID_MULTI handling change,
Da Xue
- [PATCH 0/2] Rewrite GPIO LED trigger to use trigger-sources,
Linus Walleij
- [PATCH v3 0/2] leds: Add a driver for KTD202x,
André Apitzsch
- [PATCH v2 0/2] leds: Add a driver for KTD202x,
André Apitzsch
- [PATCH v5 1/2] dt-bindings: media: remove nokia,n900-ir as pwm-ir-tx is compatible,
Sean Young
- [RESEND PATCH v3] leds: max5970: Add support for max5970,
Naresh Solanki
- [PATCH v4 0/7] Add support for LUT PPG,
Anjelique Melendez
- [PATCH v1 1/2] dt-bindings: backlight: Add MPS MP3309C,
Flavio Suligoi
- [PATCH v5 00/37] ARM: dts: qcom: cleanup PMIC usage,
Dmitry Baryshkov
- [PATCH v5 01/37] dt-bindings: input: qcom,pm8921-keypad: convert to YAML format, Dmitry Baryshkov
- [PATCH v5 03/37] ARM: dts: qcom: apq8064: correct XOADC register address, Dmitry Baryshkov
- [PATCH v5 02/37] dt-bindings: mfd: qcom-pm8xxx: add missing child nodes, Dmitry Baryshkov
- [PATCH v5 04/37] ARM: dts: qcom: msm8960: introduce label for PMIC keypad, Dmitry Baryshkov
- [PATCH v5 07/37] ARM: dts: qcom: mdm9615-wp8548-mangoh-green: group include clauses, Dmitry Baryshkov
- [PATCH v5 05/37] ARM: dts: qcom: msm8660-surf: use keypad label directly, Dmitry Baryshkov
- [PATCH v5 06/37] ARM: dts: qcom: apq8064-nexus7: move sdcc1 node to proper place, Dmitry Baryshkov
- [PATCH v5 08/37] ARM: dts: qcom: strip prefix from PMIC files, Dmitry Baryshkov
- [PATCH v5 10/37] ARM: dts: qcom: mdm9615: fix PMIC node labels, Dmitry Baryshkov
- [PATCH v5 13/37] ARM: dts: qcom: apq8064: move PMIC interrupts to the board files, Dmitry Baryshkov
- [PATCH v5 11/37] ARM: dts: qcom: msm8660: fix PMIC node labels, Dmitry Baryshkov
- [PATCH v5 09/37] ARM: dts: qcom: apq8064: fix PMIC node labels, Dmitry Baryshkov
- [PATCH v5 31/37] ARM: dts: qcom: msm8660: move RPM regulators to board files, Dmitry Baryshkov
- [PATCH v5 34/37] ARM: dts: qcom: pm8921: Disable keypad by default, Dmitry Baryshkov
- [PATCH v5 12/37] ARM: dts: qcom: msm8960: fix PMIC node labels, Dmitry Baryshkov
- [PATCH v5 15/37] ARM: dts: qcom: msm8660: move PMIC interrupts to the board files, Dmitry Baryshkov
- [PATCH v5 32/37] ARM: dts: qcom: msm8960: drop useless rpm regulators node, Dmitry Baryshkov
- [PATCH v5 33/37] ARM: dts: qcom: msm8974: move regulators to board files, Dmitry Baryshkov
- [PATCH v5 16/37] ARM: dts: qcom: msm8960: move PMIC interrupts to the board files, Dmitry Baryshkov
- [PATCH v5 17/37] ARM: dts: qcom: msm8960: split PMIC to separate dtsi files, Dmitry Baryshkov
- [PATCH v5 36/37] ARM: dts: qcom: ipq8064: drop qcom, prefix from SSBI node name, Dmitry Baryshkov
- [PATCH v5 19/37] ARM: dts: qcom: mdm9615: split PMIC to separate dtsi files, Dmitry Baryshkov
- [PATCH v5 35/37] ARM: dts: qcom: apq8060-dragonboard: rename mpp ADC channels to adc-channel, Dmitry Baryshkov
- [PATCH v5 37/37] ARM: dts: qcom: mdm9615: drop qcom, prefix from SSBI node name, Dmitry Baryshkov
- [PATCH v5 18/37] ARM: dts: qcom: apq8064: split PMICs to separate dtsi files, Dmitry Baryshkov
- [PATCH v5 14/37] ARM: dts: qcom: mdm9615: move PMIC interrupts to the board files, Dmitry Baryshkov
- [PATCH v5 22/37] ARM: dts: qcom: pm8921: reorder nodes, Dmitry Baryshkov
- [PATCH v5 21/37] ARM: dts: qcom: pm8058: reorder nodes, Dmitry Baryshkov
- [PATCH v5 20/37] ARM: dts: qcom: msm8660: split PMIC to separate dtsi files, Dmitry Baryshkov
- [PATCH v5 25/37] ARM: dts: qcom: pm8058: use defined IRQ flags, Dmitry Baryshkov
- [PATCH v5 23/37] ARM: dts: qcom: pm8018: move reg property, Dmitry Baryshkov
- [PATCH v5 24/37] ARM: dts: qcom: pm8921: move reg property, Dmitry Baryshkov
- [PATCH v5 26/37] ARM: dts: qcom: pm8921: switch to interrupts-extended, Dmitry Baryshkov
- [PATCH v5 27/37] ARM: dts: qcom: pm8018: switch to interrupts-extended, Dmitry Baryshkov
- [PATCH v5 28/37] ARM: dts: qcom: pm8058: switch to interrupts-extended, Dmitry Baryshkov
- [PATCH v5 29/37] ARM: dts: qcom: apq8064: move RPM regulators to board files, Dmitry Baryshkov
- [PATCH v5 30/37] ARM: dts: qcom: mdm9615: move RPM regulators to board files, Dmitry Baryshkov
- [PATCH v4 00/38] ARM: dts: qcom: cleanup PMIC usage,
Dmitry Baryshkov
- [PATCH v4 01/38] dt-bindings: input: qcom,pm8921-keypad: convert to YAML format, Dmitry Baryshkov
- [PATCH v4 02/38] dt-bindings: mfd: qcom-pm8xxx: add missing child nodes, Dmitry Baryshkov
- [PATCH v4 06/38] ARM: dts: qcom: msm8660-surf: use keypad label directly, Dmitry Baryshkov
- [PATCH v4 03/38] dt-bindings: mfd: qcom-pm8xxx: allow using interrupts-extended, Dmitry Baryshkov
- [PATCH v4 04/38] ARM: dts: qcom: apq8064: correct XOADC register address, Dmitry Baryshkov
- [PATCH v4 07/38] ARM: dts: qcom: apq8064-nexus7: move sdcc1 node to proper place, Dmitry Baryshkov
- [PATCH v4 05/38] ARM: dts: qcom: msm8960: introduce label for PMIC keypad, Dmitry Baryshkov
- [PATCH v4 11/38] ARM: dts: qcom: mdm9615: fix PMIC node labels, Dmitry Baryshkov
- [PATCH v4 09/38] ARM: dts: qcom: strip prefix from PMIC files, Dmitry Baryshkov
- [PATCH v4 08/38] ARM: dts: qcom: mdm9615-wp8548-mangoh-green: group include clauses, Dmitry Baryshkov
- [PATCH v4 12/38] ARM: dts: qcom: msm8660: fix PMIC node labels, Dmitry Baryshkov
- [PATCH v4 10/38] ARM: dts: qcom: apq8064: fix PMIC node labels, Dmitry Baryshkov
- [PATCH v4 30/38] ARM: dts: qcom: apq8064: move RPM regulators to board files, Dmitry Baryshkov
- [PATCH v4 31/38] ARM: dts: qcom: mdm9615: move RPM regulators to board files, Dmitry Baryshkov
- [PATCH v4 14/38] ARM: dts: qcom: apq8064: move PMIC interrupts to the board files, Dmitry Baryshkov
- [PATCH v4 32/38] ARM: dts: qcom: msm8660: move RPM regulators to board files, Dmitry Baryshkov
- [PATCH v4 34/38] ARM: dts: qcom: msm8974: move regulators to board files, Dmitry Baryshkov
- [PATCH v4 15/38] ARM: dts: qcom: mdm9615: move PMIC interrupts to the board files, Dmitry Baryshkov
- [PATCH v4 33/38] ARM: dts: qcom: msm8960: drop useless rpm regulators node, Dmitry Baryshkov
- [PATCH v4 13/38] ARM: dts: qcom: msm8960: fix PMIC node labels, Dmitry Baryshkov
- [PATCH v4 18/38] ARM: dts: qcom: msm8960: split PMIC to separate dtsi files, Dmitry Baryshkov
- [PATCH v4 35/38] ARM: dts: qcom: pm8921: Disable keypad by default, Dmitry Baryshkov
- [PATCH v4 17/38] ARM: dts: qcom: msm8960: move PMIC interrupts to the board files, Dmitry Baryshkov
- [PATCH v4 37/38] ARM: dts: qcom: ipq8064: drop qcom, prefix from SSBI node name, Dmitry Baryshkov
- [PATCH v4 16/38] ARM: dts: qcom: msm8660: move PMIC interrupts to the board files, Dmitry Baryshkov
- [PATCH v4 36/38] ARM: dts: qcom: apq8060-dragonboard: rename mpp ADC channels to adc-channel, Dmitry Baryshkov
- [PATCH v4 22/38] ARM: dts: qcom: pm8058: reorder nodes, Dmitry Baryshkov
- [PATCH v4 20/38] ARM: dts: qcom: mdm9615: split PMIC to separate dtsi files, Dmitry Baryshkov
- [PATCH v4 38/38] ARM: dts: qcom: mdm9615: drop qcom, prefix from SSBI node name, Dmitry Baryshkov
- [PATCH v4 19/38] ARM: dts: qcom: apq8064: split PMICs to separate dtsi files, Dmitry Baryshkov
- [PATCH v4 23/38] ARM: dts: qcom: pm8921: reorder nodes, Dmitry Baryshkov
- [PATCH v4 21/38] ARM: dts: qcom: msm8660: split PMIC to separate dtsi files, Dmitry Baryshkov
- [PATCH v4 25/38] ARM: dts: qcom: pm8921: move reg property, Dmitry Baryshkov
- [PATCH v4 24/38] ARM: dts: qcom: pm8018: move reg property, Dmitry Baryshkov
- [PATCH v4 27/38] ARM: dts: qcom: pm8921: switch to interrupts-extended, Dmitry Baryshkov
- [PATCH v4 26/38] ARM: dts: qcom: pm8058: use defined IRQ flags, Dmitry Baryshkov
- [PATCH v4 28/38] ARM: dts: qcom: pm8018: switch to interrupts-extended, Dmitry Baryshkov
- [PATCH v4 29/38] ARM: dts: qcom: pm8058: switch to interrupts-extended, Dmitry Baryshkov
- [lee-leds:for-leds-next] BUILD SUCCESS baca986e1f2c31f8e4b2a6d99d47c3bc844033e8, kernel test robot
- [PATCH v3] leds: max5970: Add support for max5970,
Naresh Solanki
- [PATCH v2] leds: max5970: Add support for max5970,
Naresh Solanki
- [PATCH] leds: max5970: Add support for max5970,
Naresh Solanki
- [PATCH platform-next 0/2] leds: mlxreg: Change behavior during init and remove unused definition,
Vadim Pasternak
- [PATCH] leds: pca955x: Convert enum->pointer for data in the match tables,
Biju Das
- [PATCH] leds: pca955x: fix -Wvoid-pointer-to-enum-cast warning,
Justin Stitt
- [lee-leds:for-leds-next] BUILD SUCCESS 179507fcd5e448eaecae9b69f0fb30965c3c4466, kernel test robot
- [PATCH v3 0/3] leds: aw2013: Document interrupt and pull-up supply,
Stephan Gerhold
- [PATCH -next 0/2] Simplify the code with declaration-driven macros,
Li Zetao
- [PATCH v3 0/7] Add support for LUT PPG,
Anjelique Melendez
- [RESEND PATCH v3] dt-bindings: leds: Fix reference to definition of default-state,
Jonathan Neuschäfer
- [PATCH] MAINTAINERS: Add entries for Siemens IPC modules,
Gerd Haeussler
- [PATCH] leds: make leds_class a static const structure,
Ivan Orlov
- [PATCH] leds: pca995x: Fix MODULE_DEVICE_TABLE for OF,
Marek Vasut
- [PATCH 2/2] dt-bindings: leds: add mp3326,
Yuxi (Yuxi) Wang
- [PATCH 1/2] leds: Add driver for mp3326,
Yuxi (Yuxi) Wang
- [PATCH -next] leds: remove redundant of_match_ptr(),
Zhu Wang
- [PATCH V5 0/3] Add support control UP board CPLD/FPGA pin control,
larry.lai
- [PATCH v2 0/2] pwm: Manage owner assignment implicitly for drivers,
Uwe Kleine-König
- [PATCH 0/2] pwm: Manage owner assignment implicitly for drivers,
Uwe Kleine-König
- [PATCH v3 0/6] leds: turris-omnia: updates,
Marek Behún
- [PATCH v2] leds: trigger: tty: Do not use LED_ON/OFF constants, use led_blink_set_oneshot instead,
Marek Behún
- [PATCH] leds: Fix BUG_ON check for LED_COLOR_ID_MULTI that is always false,
Marek Behún
- [PATCH] leds: trigger: tty: Fix tty trigger when LED's max_brightness is greater than 1,
Marek Behún
- [PATCH] leds: multicolor: Use rounded division when calculating color components,
Marek Behún
- [GIT PULL] Immutable branch between pdx86 and LED due for the v6.6 merge window v2, Hans de Goede
- [PATCH 2/3] leds: simatic-ipc-leds-gpio: add support for module BX-59A,
xingtong_wu
- [PATCH] dt-bindings: leds: rohm,bd71828: Drop select:false,
Krzysztof Kozlowski
- [RESEND] [PATCH v11 0/4] Add a multicolor LED driver for groups of monochromatic LEDs,
Jean-Jacques Hiblot
- [PATCH] led: trig: timer: stop offloading on deactivation,
Daniel Golle
- [PATCH] leds: qcom-lpg: Drop assignment to struct pwmchip::base,
Uwe Kleine-König
- [PATCH 0/3] leds: Add Broadchip BCT3024 LED driver,
Matus Gajdos
- [PATCH v2 0/7] Add support for LUT PPG,
Anjelique Melendez
- [PATCH v2 0/3] leds-qcom-flash: several tiny fixes,
Fenglin Wu
- [PATCH v2] dt-bindings: leds: Convert Panasonic AN30259A to DT schema,
Rob Herring
- [PATCH v2 1/2] dt-bindings: gpio: Add gpio-line-names to STMPE GPIO,
Alexander Stein
- [PATCH] leds: simatic-ipc-leds-gpio: Convert to platform remove callback returning void,
Uwe Kleine-König
- [PATCH AUTOSEL 6.1 02/34] led: qcom-lpg: Fix resource leaks in for_each_available_child_of_node() loops, Sasha Levin
- [PATCH AUTOSEL 6.4 02/40] led: qcom-lpg: Fix resource leaks in for_each_available_child_of_node() loops, Sasha Levin
- [PATCH] leds: ns2: Slightly simplify a memory allocation,
Christophe JAILLET
- [PATCH 1/2] dt-bindings: gpio: Add gpio-line-names to STMPE GPIO,
Alexander Stein
- [PATCH v2 0/3] platform/x86: move simatic drivers into subdir,
Henning Schild
- [PATCH 0/3] platform/x86: move simatic ipc drivers into subdir,
Henning Schild
[Index of Archives]
[Linux Kernel Development]
[Security]
[Linux ARM Kernel]
[Linux MIPS]
[Linux S390]
[Bugtraq]
[Fedora ARM]