The following patch series includes several updates for the AW200XX LED
driver:
- some small fixes and optimizations to the driver implementation:
delays, autodimming calculation, disable_locking regmap flag,
display_rows calculation in runtime;
- fix LED device tree node pattern to accept LED names counting not
only from 0 to f;
- support HWEN hardware control, which allows enabling or disabling
AW200XX RTL logic from the main SoC using a GPIO pin;
- introduce the new AW20108 LED controller, the datasheet for this
controller can be found at [1].
Links:
[1] https://doc.awinic.com/doc/20230609wm/8a9a9ac8-1d8f-4e75-bf7a-67a04465c153.pdf
Dmitry Rokosov (3):
dt-bindings: leds: aw200xx: fix led dt node pattern
leds: aw200xx: support HWEN hardware control
dt-bindings: leds: aw200xx: introduce optional hwen-gpio property
George Stark (7):
leds: aw200xx: calculate dts property display_rows in driver
dt-bindings: leds: aw200xx: remove property "awinic,display-rows"
leds: aw200xx: add delay after software reset
leds: aw200xx: enable disable_locking flag in regmap config
leds: aw200xx: improve autodim calculation method
leds: aw200xx: add support for aw20108 device
dt-bindings: leds: Add binding for AW20108 led driver
Martin Kurbanov (1):
leds: aw200xx: fix write to DIM parameter
.../bindings/leds/awinic,aw200xx.yaml | 42 +++----
drivers/leds/Kconfig | 8 +-
drivers/leds/leds-aw200xx.c | 112 +++++++++++++++---
3 files changed, 114 insertions(+), 48 deletions(-)
--
2.36.0
