Linux IIO Development

• Thread Index

• Re: [PATCH v3 1/6] Documentation: dt-bindings: Document STM32 ADC DT bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: ad9832:
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: New driver for TI ADS79XX chips
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] staging: iio: ad9832:
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH] iio: adc: New driver for TI ADS79XX chips
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH] iio: accel: hid-sensor-accel-3d: Add timestamp
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 1/7] dt-bindings: document devicetree bindings for mux-gpio
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [RFC PATCH v2 1/7] dt-bindings: document devicetree bindings for mux-gpio
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [patch] iio: tsl2583: off by one in in_illuminance_lux_table_store()
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [patch] iio: tsl2583: off by one in in_illuminance_lux_table_store()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [RFC PATCH v2 3/7] iio: inkern: api for manipulating ext_info of iio channels
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [RFC PATCH v2 1/7] dt-bindings: document devicetree bindings for mux-gpio
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [RFC PATCH v2 7/7] i2c: i2c-mux-simple: new driver
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [RFC PATCH v2 2/7] misc: minimal mux subsystem and gpio-based mux controller
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [RFC PATCH v2 0/7] mux controller abstraction and iio/i2c muxes
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [RFC PATCH v2 6/7] dt-bindings: i2c: i2c-mux-simple: document i2c-mux-simple bindings
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [RFC PATCH v2 5/7] iio: multiplexer: new iio category and iio-mux driver
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [RFC PATCH v2 4/7] dt-bindings: iio: iio-mux: document iio-mux bindings
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [RFC PATCH 4/7] dt-bindings: iio: iio-mux: document iio-mux bindings
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [RFC PATCH 0/7] mux controller astraction and iio/i2c muxes
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [RFC PATCH 4/7] dt-bindings: iio: iio-mux: document iio-mux bindings
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [RFC PATCH 6/7] dt-bindings: i2c: i2c-mux-simple: document i2c-mux-simple bindings
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [RFC PATCH 5/7] iio: multiplexer: new iio category and iio-mux driver
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [RFC PATCH 0/7] mux controller astraction and iio/i2c muxes
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [RFC PATCH 7/7] i2c: i2c-mux-simple: new driver
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [RFC PATCH 3/7] iio: inkern: api for manipulating ext_info of iio channels
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [RFC PATCH 1/7] dt-bindings: document devicetree bindings for mux-gpio
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [RFC PATCH 2/7] misc: minimal mux subsystem and gpio-based mux controller
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v2] iio: common: st_sensors: fix channel data parsing
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PULL] 3rd set of new drivers, features and cleanups for IIO in the 4.10 cycle
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/6] Documentation: dt-bindings: Document STM32 ADC DT bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2] iio: magnetometer: separate the values of attributes based on their usage type for HID compass sensor
  • From: "Ooi, Joyce" <joyce.ooi@xxxxxxxxx>
• Re: [PATCH v2] iio: accel: st_accel: inline per-sensor data
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PATCH v7 7/9] dt-bindings: input: move ads7846 bindings to touchscreen subdirectory
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v9 1/5] mfd: mxs-lradc: Add support for mxs-lradc MFD
  • From: Ksenija Stanojević <ksenija.stanojevic@xxxxxxxxx>
• Re: [PATCH v9 1/5] mfd: mxs-lradc: Add support for mxs-lradc MFD
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Re: [PATCH v9 1/5] mfd: mxs-lradc: Add support for mxs-lradc MFD
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v9 1/5] mfd: mxs-lradc: Add support for mxs-lradc MFD
  • From: Ksenija Stanojević <ksenija.stanojevic@xxxxxxxxx>
• Re: [PATCH v4 0/8] IIO wrapper drivers, dpot-dac and envelope-detector
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v3 2/6] iio: adc: Add support for STM32 ADC core
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v3 5/6] ARM: dts: stm32f429: Add adc support
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v3 0/6] Add support for STM32 ADC
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v3 4/6] ARM: configs: stm32: enable ADC driver
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v3 3/6] iio: adc: Add support for STM32 ADC
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v3 6/6] ARM: dts: stm32f429: enable adc on eval board
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v3 1/6] Documentation: dt-bindings: Document STM32 ADC DT bindings
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH v2 3/6] iio: adc: Add support for STM32 ADC
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH v2 3/6] iio: adc: Add support for STM32 ADC
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH v2 2/6] mfd: stm32-adc: Add support for stm32 ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [bug report] staging: iio: ad9832: clean-up regulator 'reg'
  • From: Eva Rachel Retuya <eraretuya@xxxxxxxxx>
• [bug report] staging: iio: ad9832: clean-up regulator 'reg'
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v2 2/6] mfd: stm32-adc: Add support for stm32 ADC
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH v9 1/5] mfd: mxs-lradc: Add support for mxs-lradc MFD
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH V4] hid: hid-sensor-hub: clear memory to avoid random data
  • From: Song Hongyan <hongyan.song@xxxxxxxxx>
• Re: [PATCH v9 1/5] mfd: mxs-lradc: Add support for mxs-lradc MFD
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH 1/2] staging: iio: ad7606: replace range/range_available with corresponding scale
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/2] staging: iio: ad7606: replace range/range_available with corresponding scale
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 9/9] DT:omap3+ads7846: use new common touchscreen bindings
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3] hid: hid-sensor-hub: clear memory to avoid random data
  • From: "Pandruvada, Srinivas" <srinivas.pandruvada@xxxxxxxxx>
• Re: [PATCH 1/2] staging: iio: ad7606: replace range/range_available with corresponding scale
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v9 2/5] iio: adc: mxs-lradc: Add support for adc driver
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v9 1/5] mfd: mxs-lradc: Add support for mxs-lradc MFD
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v9 1/5] mfd: mxs-lradc: Add support for mxs-lradc MFD
  • From: Ksenija Stanojević <ksenija.stanojevic@xxxxxxxxx>
• Re: [PATCH 1/2] iio: bmi160: Support hardware fifo
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] staging: iio: ad7606: replace range/range_available with corresponding scale
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] staging: iio: ad7606: replace range/range_available with corresponding scale
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 2/6] mfd: stm32-adc: Add support for stm32 ADC
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: st_sensors: centralize I2C probe() code
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 3/6] iio: adc: Add support for STM32 ADC
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH V4 1/2] iio: adc: spmi-vadc: Update function for generic voltage conversion
  • From: "Phani A, Rama Krishna" <rphani@xxxxxxxxxxxxxx>
• Re: [PATCH V4 2/2] iio: adc: spmi-vadc: Changes to support different scaling
  • From: "Phani A, Rama Krishna" <rphani@xxxxxxxxxxxxxx>
• [PATCH v2] iio: accel: st_accel: inline per-sensor data
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/2] staging: iio: ad7606: replace range/range_available with corresponding scale
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 1/2] staging: iio: ad7606: replace range/range_available with corresponding scale
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v3] hid: hid-sensor-hub: clear memory to avoid random data
  • From: Song Hongyan <hongyan.song@xxxxxxxxx>
• [PULL] 3rd set of new drivers, features and cleanups for IIO in the 4.10 cycle
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 26/26] staging: iio: tsl2583: move out of staging
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [PATCH v2] hid: hid-sensor-hub: clear memory to avoid random data
  • From: "Pandruvada, Srinivas" <srinivas.pandruvada@xxxxxxxxx>
• Re: [PATCH v4 26/26] staging: iio: tsl2583: move out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 25/26] staging: iio: tsl2583: add copyright and MODULE_AUTHOR
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 24/26] staging: iio: tsl2583: remove unnecessary variable initialization
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 23/26] staging: iio: tsl2583: remove unnecessary memset call
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 22/26] staging: iio: tsl2583: remove comment for tsl2583_probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 21/26] staging: iio: tsl2583: clarified comment about clearing interrupts
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 20/26] staging: iio: tsl2583: add tsl2583 to list of supported devices in the header
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 19/26] staging: iio: tsl2583: move from a global to a per device lux table
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 18/26] staging: iio: tsl2583: don't assume an unsigned int is 32 bits
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 17/26] staging: iio: tsl2583: remove unnecessary parentheses
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 16/26] staging: iio: tsl2583: change tsl2583_als_calibrate() to return 0 on success
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 15/26] staging: iio: tsl2583: moved code block inside else statement
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 14/26] staging: iio: tsl2583: updated code comment to match what the code does
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 13/26] staging: iio: tsl2583: fix multiline comment syntax
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 12/26] staging: iio: tsl2583: combine sysfs documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 11/26] staging: iio: tsl2583: change newlines to improve readability
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 10/26] staging: iio: tsl2583: fix comparison between signed and unsigned integers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 09/26] staging: iio: tsl2583: fix alignment of #define values
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 08/26] staging: iio: tsl2583: unify function and variable prefix to tsl2583_
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 07/26] staging: iio: tsl2583: cleaned up logging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 06/26] staging: iio: tsl2583: remove the FSF's mailing address
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 05/26] staging: iio: tsl2583: remove redundant write to the control register in taos_probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 04/26] staging: iio: tsl2583: change current chip state from a tristate to a bool
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 03/26] staging: iio: tsl2583: remove unnecessary chip status checks in suspend/resume
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 02/26] staging: iio: tsl2583: remove unnecessary chip status check in taos_get_lux
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 01/26] staging: iio: tsl2583: check if chip is in a working state in in_illuminance_calibrate_store
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/6] Documentation: dt-bindings: Document STM32 ADC DT bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: twl4030-madc: convert to DT only
  • From: Nicolae Rosia <nicolae.rosia.oss@xxxxxxxxx>
• Re: [PATCH v7 4/9] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v4 04/26] staging: iio: tsl2583: change current chip state from a tristate to a bool
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v4 03/26] staging: iio: tsl2583: remove unnecessary chip status checks in suspend/resume
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v4 01/26] staging: iio: tsl2583: check if chip is in a working state in in_illuminance_calibrate_store
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v4 02/26] staging: iio: tsl2583: remove unnecessary chip status check in taos_get_lux
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v4 05/26] staging: iio: tsl2583: remove redundant write to the control register in taos_probe()
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v4 06/26] staging: iio: tsl2583: remove the FSF's mailing address
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v4 07/26] staging: iio: tsl2583: cleaned up logging
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v4 09/26] staging: iio: tsl2583: fix alignment of #define values
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v4 11/26] staging: iio: tsl2583: change newlines to improve readability
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v4 10/26] staging: iio: tsl2583: fix comparison between signed and unsigned integers
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v4 12/26] staging: iio: tsl2583: combine sysfs documentation
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v4 08/26] staging: iio: tsl2583: unify function and variable prefix to tsl2583_
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v4 14/26] staging: iio: tsl2583: updated code comment to match what the code does
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v4 13/26] staging: iio: tsl2583: fix multiline comment syntax
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v4 15/26] staging: iio: tsl2583: moved code block inside else statement
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v4 16/26] staging: iio: tsl2583: change tsl2583_als_calibrate() to return 0 on success
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v4 17/26] staging: iio: tsl2583: remove unnecessary parentheses
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v4 18/26] staging: iio: tsl2583: don't assume an unsigned int is 32 bits
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v4 19/26] staging: iio: tsl2583: move from a global to a per device lux table
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v4 20/26] staging: iio: tsl2583: add tsl2583 to list of supported devices in the header
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v4 22/26] staging: iio: tsl2583: remove comment for tsl2583_probe()
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v4 21/26] staging: iio: tsl2583: clarified comment about clearing interrupts
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v4 24/26] staging: iio: tsl2583: remove unnecessary variable initialization
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v4 23/26] staging: iio: tsl2583: remove unnecessary memset call
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v4 25/26] staging: iio: tsl2583: add copyright and MODULE_AUTHOR
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v4 26/26] staging: iio: tsl2583: move out of staging
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v4 00/26] staging: iio: tsl2583: move out of staging
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [PATCH] iio: twl4030-madc: convert to DT only
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 8/8] iio: envelope-detector: ADC driver based on a DAC and a comparator
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 8/8] iio: envelope-detector: ADC driver based on a DAC and a comparator
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 7/8] dt-bindings: iio: document envelope-detector bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 6/8] iio: dpot-dac: DAC driver based on a digital potentiometer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 4/8] dt-bindings: add axentia to vendor-prefixes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 3/8] iio: mcp4531: provide range of available raw values
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/8] iio: inkern: add helpers to query available values from channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/8] iio:core: add a callback to allow drivers to provide _available attributes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 0/8] IIO wrapper drivers, dpot-dac and envelope-detector
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 16/28] staging: iio: tsl2583: updated code comment to match what the code does
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/6] iio: adc: Add support for STM32 ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/6] mfd: stm32-adc: Add support for stm32 ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 16/28] staging: iio: tsl2583: updated code comment to match what the code does
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [PATCH v3 28/28] staging: iio: tsl2583: move out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 21/28] staging: iio: tsl2583: move from a global to a per device lux table
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 20/28] staging: iio: tsl2583: don't assume an unsigned int is 32 bits
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 03/28] staging: iio: tsl2583: check if chip is suspended in in_illuminance_calibrate_store
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [PATCH v3 16/28] staging: iio: tsl2583: updated code comment to match what the code does
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 05/28] staging: iio: tsl2583: remove unnecessary chip status checks in suspend/resume
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 04/28] staging: iio: tsl2583: remove unnecessary chip status check in taos_get_lux
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 03/28] staging: iio: tsl2583: check if chip is suspended in in_illuminance_calibrate_store
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 03/28] staging: iio: tsl2583: check if chip is suspended in in_illuminance_calibrate_store
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 02/28] staging: iio: tsl2583: fix issue with changes to calibscale and int_time not being set on the chip
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 01/28] staging: iio: tsl2583: split out functionality of taos_chip_on()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: st_sensors: centralize I2C probe() code
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: bmi160: Support hardware fifo
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: bmi160: Support hardware fifo
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: pressure: st_pressure: inline per-sensor data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/4] iio: magn: st_magn: inline per-sensor data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: gyro: st_gyro: inline per-sensor data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] iio: accel: st_accel: inline per-sensor data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] iio: accel: st_accel: inline per-sensor data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V4 1/2] iio: adc: spmi-vadc: Update function for generic voltage conversion
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: document bindings for mounting matrices
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V4 2/2] iio: adc: spmi-vadc: Changes to support different scaling
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: inv_mpu6050: inform the i2c mux core about how it is used
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] hid: hid-sensor-hub: clear memory to avoid random data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] staging: iio: ad7606: move out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: cros_ec_sensors_core: fix unsigned compared less than zero on status
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] staging: iio: ad7606: replace range/range_available with corresponding scale
  • From: Eva Rachel Retuya <eraretuya@xxxxxxxxx>
• Re: [patch] iio:adc: ad7766: testing the wrong variable in probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] staging: iio: ad7606: move out of staging
  • From: Eva Rachel Retuya <eraretuya@xxxxxxxxx>
• Re: [PATCH 2/2] staging: iio: ad7606: move out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] staging: iio: ad7606: replace range/range_available with corresponding scale
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 4/9] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 4/9] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: twl4030-madc: convert to DT only
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] Documentation: DT: Add bmi160 imu binding
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: bmi160: Support hardware fifo
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: twl4030-madc: convert to DT only
  • From: Nicolae Rosia <Nicolae_Rosia@xxxxxxxxxx>
• [PATCH v7 8/9] drivers:input:ads7846(+tsc2046): fix spi module table
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v7 0/9] drivers: touchscreen: tsc2007 and ads7846/tsc2046 improvements (use common touchscreen bindings, pre-calibration, spi fix and provide iio raw values)
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v7 9/9] DT:omap3+ads7846: use new common touchscreen bindings
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v7 6/9] drivers:input:ads7846(+tsc2046): add new common binding names, pre-calibration and flipping
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v7 7/9] dt-bindings: input: move ads7846 bindings to touchscreen subdirectory
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v7 4/9] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v7 2/9] drivers:input:tsc2007: send pendown and penup only once like ads7846(+tsc2046) driver does
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v7 1/9] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v7 5/9] DT:omap3+tsc2007: use new common touchscreen bindings
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v7 3/9] drivers:input:tsc2007: check for presence and power down tsc2007 during probe
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] staging: iio: ad7606: move out of staging
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/2] staging: iio: ad7606: move out of staging
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 1/2] staging: iio: ad7606: replace range/range_available with corresponding scale
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [patch] iio:adc: ad7766: testing the wrong variable in probe
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v4 8/8] iio: envelope-detector: ADC driver based on a DAC and a comparator
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v2 2/6] mfd: stm32-adc: Add support for stm32 ADC
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 1/2] staging: iio: ad7606: replace range/range_available with corresponding scale
  • From: Eva Rachel Retuya <eraretuya@xxxxxxxxx>
• [PATCH 2/2] staging: iio: ad7606: move out of staging
  • From: Eva Rachel Retuya <eraretuya@xxxxxxxxx>
• [PATCH 0/2] staging: iio: ad7606: move driver out of staging
  • From: Eva Rachel Retuya <eraretuya@xxxxxxxxx>
• Re: [PATCH] drivers: mfd: ti_am335x_tscadc: increase ADC ref clock to 24MHz
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH] drivers: mfd: ti_am335x_tscadc: increase ADC ref clock to 24MHz
  • From: John Syne <john3909@xxxxxxxxx>
• [PATCH v2] hid: hid-sensor-hub: clear memory to avoid random data
  • From: Song Hongyan <hongyan.song@xxxxxxxxx>
• Re: [PATCH v2 2/6] mfd: stm32-adc: Add support for stm32 ADC
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [patch] iio: cros_ec_sensors_core: signedness bug in cros_ec_sensors_read_lpc()
  • From: Guenter Roeck <groeck@xxxxxxxxxx>
• [patch] iio: cros_ec_sensors_core: signedness bug in cros_ec_sensors_read_lpc()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [patch] iio:adc: ad7766: testing the wrong variable in probe
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 2/2] Documentation: DT: Add bmi160 imu binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 4/6] ARM: configs: stm32: enable ADC driver
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2 0/6] Add support for STM32 ADC
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2 5/6] ARM: dts: stm32f429: Add adc support
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2 1/6] Documentation: dt-bindings: Document STM32 ADC DT bindings
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2 2/6] mfd: stm32-adc: Add support for stm32 ADC
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2 3/6] iio: adc: Add support for STM32 ADC
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2 6/6] ARM: dts: stm32f429: enable adc on eval board
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 2/2] iio: st_sensors: centralize SPI probe() code
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/2] iio: st_sensors: centralize I2C probe() code
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] iio: imu: inv_mpu6050: inform the i2c mux core about how it is used
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v3 01/28] staging: iio: tsl2583: split out functionality of taos_chip_on()
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 00/28] staging: iio: tsl2583: move out of staging
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 02/28] staging: iio: tsl2583: fix issue with changes to calibscale and int_time not being set on the chip
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 11/28] staging: iio: tsl2583: fix alignment of #define values
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 10/28] staging: iio: tsl2583: unify function and variable prefix to tsl2583_
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 08/28] staging: iio: tsl2583: remove the FSF's mailing address
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 07/28] staging: iio: tsl2583: remove redundant write to the control register in taos_probe()
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 09/28] staging: iio: tsl2583: cleaned up logging
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 14/28] staging: iio: tsl2583: combine sysfs documentation
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 04/28] staging: iio: tsl2583: remove unnecessary chip status check in taos_get_lux
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 13/28] staging: iio: tsl2583: change newlines to improve readability
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 16/28] staging: iio: tsl2583: updated code comment to match what the code does
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 20/28] staging: iio: tsl2583: don't assume an unsigned int is 32 bits
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 19/28] staging: iio: tsl2583: remove unnecessary parentheses
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 18/28] staging: iio: tsl2583: change tsl2583_als_calibrate() to return 0 on success
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 03/28] staging: iio: tsl2583: check if chip is suspended in in_illuminance_calibrate_store
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 22/28] staging: iio: tsl2583: add tsl2583 to list of supported devices in the header
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 05/28] staging: iio: tsl2583: remove unnecessary chip status checks in suspend/resume
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 12/28] staging: iio: tsl2583: fix comparison between signed and unsigned integers
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 21/28] staging: iio: tsl2583: move from a global to a per device lux table
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 15/28] staging: iio: tsl2583: fix multiline comment syntax
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 24/28] staging: iio: tsl2583: remove comment for tsl2583_probe()
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 25/28] staging: iio: tsl2583: remove unnecessary memset call
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 26/28] staging: iio: tsl2583: remove unnecessary variable initialization
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 17/28] staging: iio: tsl2583: moved code block inside else statement
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 28/28] staging: iio: tsl2583: move out of staging
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 27/28] staging: iio: tsl2583: add copyright and MODULE_AUTHOR
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 23/28] staging: iio: tsl2583: clarified comment about clearing interrupts
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 06/28] staging: iio: tsl2583: change current chip state from a tristate to a bool
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [PATCH] drivers: mfd: ti_am335x_tscadc: increase ADC ref clock to 24MHz
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH] iio: cros_ec_sensors_core: fix unsigned compared less than zero on status
  • From: Guenter Roeck <groeck@xxxxxxxxxx>
• Re: [PATCH] drivers: mfd: ti_am335x_tscadc: increase ADC ref clock to 24MHz
  • From: John Syne <john3909@xxxxxxxxx>
• [PATCH] iio: cros_ec_sensors_core: fix unsigned compared less than zero on status
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH v6 5/8] DT:omap3+tsc2007: use new common touchscreen bindings
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 3/4] ARM: dts: am33xx: add DMA properties for tscadc
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] iio: bmi160: Support hardware fifo
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] Documentation: DT: Add bmi160 imu binding
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [PATCH 4/4] iio: pressure: st_pressure: inline per-sensor data
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 3/4] iio: magn: st_magn: inline per-sensor data
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/4] iio: accel: st_accel: inline per-sensor data
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/4] iio: gyro: st_gyro: inline per-sensor data
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 0/4] ST Sensors: inline sensor data
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v4 8/8] iio: envelope-detector: ADC driver based on a DAC and a comparator
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH v4 8/8] iio: envelope-detector: ADC driver based on a DAC and a comparator
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: bmi160: Support hardware fifo
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] iio: bmi160: Support hardware fifo
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [bug report] iio: adc: ti-adc161s626: add regulator support
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] staging: iio: ad9832: allocate data before using
  • From: Eva Rachel Retuya <eraretuya@xxxxxxxxx>
• Re: [PATCH v7 1/3] input: touchscreen: TOUCHSCREEN_SUN4I depends on !SUN4I_GPADC
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v9 1/5] mfd: mxs-lradc: Add support for mxs-lradc MFD
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Re: [PATCH v4 8/8] iio: envelope-detector: ADC driver based on a DAC and a comparator
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v4 8/8] iio: envelope-detector: ADC driver based on a DAC and a comparator
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH v4 8/8] iio: envelope-detector: ADC driver based on a DAC and a comparator
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v2 23/23] staging: iio: tsl2583: move out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 22/23] staging: iio: tsl2583: updated copyright and MODULE_AUTHOR
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v4 2/8] iio: inkern: add helpers to query available values from channels
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v4 7/8] dt-bindings: iio: document envelope-detector bindings
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: gyro: mpu3050: add I2C dependency
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: gyro: mpu3050: remove duplicate initializer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: tsl2583: fix unused function warning
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: ad9832: allocate data before using
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v4 3/8] iio: mcp4531: provide range of available raw values
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v4 6/8] iio: dpot-dac: DAC driver based on a digital potentiometer
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v4 4/8] dt-bindings: add axentia to vendor-prefixes
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v4 8/8] iio: envelope-detector: ADC driver based on a DAC and a comparator
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH] hid: hid-sensor-hub: clear memory to avoid random data
  • From: "Pandruvada, Srinivas" <srinivas.pandruvada@xxxxxxxxx>
• Re: [PATCH v4 8/8] iio: envelope-detector: ADC driver based on a DAC and a comparator
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH v2 09/23] staging: iio: tsl2583: cleaned up logging
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: gyro: mpu3050: add I2C dependency
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: gyro: mpu3050: remove duplicate initializer
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v2] iio: document bindings for mounting matrices
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] staging: iio: ad9832: allocate data before using
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH] staging: iio: tsl2583: fix unused function warning
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 2/2] iio: gyro: mpu3050: add I2C dependency
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 1/2] iio: gyro: mpu3050: remove duplicate initializer
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH v4 8/8] iio: envelope-detector: ADC driver based on a DAC and a comparator
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v4 1/8] iio:core: add a callback to allow drivers to provide _available attributes
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v4 5/8] dt-bindings: iio: document dpot-dac bindings
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v4 0/8] IIO wrapper drivers, dpot-dac and envelope-detector
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH V4 2/2] iio: adc: spmi-vadc: Changes to support different scaling
  • From: Rama Krishna Phani A <rphani@xxxxxxxxxxxxxx>
• [PATCH V4 1/2] iio: adc: spmi-vadc: Update function for generic voltage conversion
  • From: Rama Krishna Phani A <rphani@xxxxxxxxxxxxxx>
• [PATCH V4 0/2] Changes to support different VADC scaling
  • From: Rama Krishna Phani A <rphani@xxxxxxxxxxxxxx>
• Re: [PATCH v2 09/23] staging: iio: tsl2583: cleaned up logging
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH v2 23/23] staging: iio: tsl2583: move out of staging
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 17/23] staging: iio: tsl2583: moved code block inside else statement
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 18/23] staging: iio: tsl2583: change tsl2583_als_calibrate() to return 0 on success
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 14/23] staging: iio: tsl2583: combine sysfs documentation
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 16/23] staging: iio: tsl2583: updated code comment to match what the code does
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 21/23] staging: iio: tsl2583: move from a global to a per device lux table
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 13/23] staging: iio: tsl2583: change newlines to improve readability
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 20/23] staging: iio: tsl2583: don't assume an unsigned int is 32 bits
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 15/23] staging: iio: tsl2583: fix multiline comment syntax
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 12/23] staging: iio: tsl2583: fix comparison between signed and unsigned integers
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 22/23] staging: iio: tsl2583: updated copyright and MODULE_AUTHOR
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 19/23] staging: iio: tsl2583: remove unnecessary parentheses
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 11/23] staging: iio: tsl2583: fix alignment of #define values
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 01/23] staging: iio: tsl2583: split out functionality of taos_chip_on()
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 02/23] staging: iio: tsl2583: fix issue with changes to calibscale and int_time not being set on the chip
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 03/23] staging: iio: tsl2583: check if chip is suspended in in_illuminance_calibrate_store
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 06/23] staging: iio: tsl2583: change current chip state from a tristate to a bool
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 05/23] staging: iio: tsl2583: remove unnecessary chip status checks in suspend/resume
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 04/23] staging: iio: tsl2583: remove unnecessary chip status check in taos_get_lux
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 09/23] staging: iio: tsl2583: cleaned up logging
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 10/23] staging: iio: tsl2583: unify function and variable prefix to tsl2583_
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 07/23] staging: iio: tsl2583: remove redundant write to the control register in taos_probe()
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 08/23] staging: iio: tsl2583: remove the FSF's mailing address
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 00/23] staging: iio: tsl2583: move out of staging
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH] hid: hid-sensor-hub: clear memory to avoid random data
  • From: Song Hongyan <hongyan.song@xxxxxxxxx>
• Re: [PATCH v3 1/8] iio:core: add a callback to allow drivers to provide _available attributes
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Re: [PATCH] hid: hid-sensor-hub: clear memory to avoid random data
  • From: "Pandruvada, Srinivas" <srinivas.pandruvada@xxxxxxxxx>
• Re: [PATCH v3 1/8] iio:core: add a callback to allow drivers to provide _available attributes
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH V3 1/2] iio: adc: spmi-vadc: Update changes to support reporting of Raw adc code.
  • From: "Phani A, Rama Krishna" <rphani@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/8] iio:core: add a callback to allow drivers to provide _available attributes
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• Re: [PATCH v3 1/8] iio:core: add a callback to allow drivers to provide _available attributes
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• Re: [PULL] Second set of IIO fixes for the 4.9 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PULL] Second set of IIO new device support and cleanups for the 4.10 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] hid: hid-sensor-hub: clear memory to avoid random data
  • From: Song Hongyan <hongyan.song@xxxxxxxxx>
• [PULL] Second set of IIO fixes for the 4.9 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL] Second set of IIO new device support and cleanups for the 4.10 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 7/9] staging: iio: tsl2583: fix issue with changes to calibscale and int_time not being set on the chip
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 7/9] staging: iio: tsl2583: fix issue with changes to calibscale and int_time not being set on the chip
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] Documentation: DT: Add bmi160 imu binding
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: bmi160: Support hardware fifo
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 7/9] staging: iio: tsl2583: fix issue with changes to calibscale and int_time not being set on the chip
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 9/9] staging: iio: tsl2583: remove redundant write to the control register in taos_probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 8/9] staging: iio: tsl2583: check if chip is suspended in in_illuminance_calibrate_store
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 6/9] staging: iio: tsl2583: remove redudant i2c call in taos_als_calibrate()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/9] staging: iio: tsl2583: don't shutdown chip when updating the lux table
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/9] staging: iio: tsl2583: remove redundant power off sequence in taos_chip_on()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/9] staging: iio: tsl2583: fixed ordering of comments
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/9] staging: iio: tsl2583: removed unused code from device probing
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/9] staging: iio: tsl2583: i2c_smbus_write_byte() / i2c_smbus_read_byte() migration
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/9] staging: iio: tsl2583: i2c_smbus_write_byte() / i2c_smbus_read_byte() migration
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: hid-sensor-als: Add realtime data type parse support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: hid-sensors: Increase the precision of scale
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: orientation: hid-sensor-rotation: Add PM function
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] mfd: ti_am335x_tscadc: store physical address
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/4] ARM: dts: am33xx: add DMA properties for tscadc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/4] drivers: iio: ti_am335x_adc: add dma support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: TODO task for MMA8452 Accelerometer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: hid-sensor-attributes: Check sample_frequency/hysteresis write data legitimacy
  • From: "Pandruvada, Srinivas" <srinivas.pandruvada@xxxxxxxxx>
• Re: [PATCH v2] iio: adc: at91: add suspend and resume callback
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: hid-sensor-attributes: Check sample_frequency/hysteresis write data legitimacy
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 6/6] staging: iio: ad9832: clean-up regulator 'reg'
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/6] staging: iio: ad9832: add DVDD regulator
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/6] staging: iio: ad7192: rename regulator 'reg' to 'avdd'
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/6] staging: iio: ad7192: add DVdd regulator
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/6] staging: iio: rework regulator handling
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/6] staging: iio: set proper supply name to devm_regulator_get()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/6] staging: iio: set proper supply name to devm_regulator_get()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V3 1/2] iio: adc: spmi-vadc: Update changes to support reporting of Raw adc code.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] hid: sensor: fix input and feature attributes in HID sensor custom sysfs interface
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH 02/10] iio: adc: Add stm32 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: regmap and i2c_smbus_write_byte question
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [PATCH] iio: light and pressure: change data fields for ambient light and pressure sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/6] staging: iio: set proper supply name to devm_regulator_get()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: regmap and i2c_smbus_write_byte question
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• regmap and i2c_smbus_write_byte question
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [PATCH] iio: magnetometer: separate the values of attributes based on their usage type for HID compass sensor
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: hid-sensor-attributes: Check sample_frequency/hysteresis write data legitimacy
  • From: "Pandruvada, Srinivas" <srinivas.pandruvada@xxxxxxxxx>
• Re: [PATCH] hid: sensor: fix input and feature attributes in HID sensor custom sysfs interface
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH] hid: sensor: fix input and feature attributes in HID sensor custom sysfs interface
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: [PATCH 1/6] staging: iio: set proper supply name to devm_regulator_get()
  • From: Eva Rachel Retuya <eraretuya@xxxxxxxxx>
• Re: [PATCH] HID: sensor-hub: Fix packing of result buffer for feature report
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH v7 3/3] iio: adc: add support for Allwinner SoCs ADC
  • From: Julia Lawall <julia.lawall@xxxxxxx>
• Re: [PATCH v7 3/3] iio: adc: add support for Allwinner SoCs ADC
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: at91: add suspend and resume callback
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
• Re: [PATCH] iio: common: hid-sensors: change the precision of scale values
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: light and pressure: change data fields for ambient light and pressure sensor
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH 3/9] staging: iio: tsl2583: fixed ordering of comments
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 1/9] staging: iio: tsl2583: i2c_smbus_write_byte() / i2c_smbus_read_byte() migration
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 4/9] staging: iio: tsl2583: remove redundant power off sequence in taos_chip_on()
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 5/9] staging: iio: tsl2583: don't shutdown chip when updating the lux table
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 6/9] staging: iio: tsl2583: remove redudant i2c call in taos_als_calibrate()
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 2/9] staging: iio: tsl2583: removed unused code from device probing
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 7/9] staging: iio: tsl2583: fix issue with changes to calibscale and int_time not being set on the chip
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 8/9] staging: iio: tsl2583: check if chip is suspended in in_illuminance_calibrate_store
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 9/9] staging: iio: tsl2583: remove redundant write to the control register in taos_probe()
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 0/9] staging: iio: tsl2583: i2c cleanups
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] iio: bmi160: Support hardware fifo
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH 2/2] Documentation: DT: Add bmi160 imu binding
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [PATCH 1/2] iio: bmi160: Support hardware fifo
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• Re: [PATCH 01/10] Documentation: dt-bindings: Document STM32 ADC DT bindings
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH] hid: sensor: fix input and feature attributes in HID sensor custom sysfs interface
  • From: "Ooi, Joyce" <joyce.ooi@xxxxxxxxx>
• [PATCH] iio: light and pressure: change data fields for ambient light and pressure sensor
  • From: "Ooi, Joyce" <joyce.ooi@xxxxxxxxx>
• [PATCH v7 1/3] input: touchscreen: TOUCHSCREEN_SUN4I depends on !SUN4I_GPADC
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH v7 3/3] iio: adc: add support for Allwinner SoCs ADC
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH v7 0/3] add support for Allwinner SoCs ADC
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH v7 2/3] ARM: sunxi_defconfig: Add CONFIG_THERMAL_OF
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH] iio: magnetometer: separate the values of attributes based on their usage type for HID compass sensor
  • From: "Ooi, Joyce" <joyce.ooi@xxxxxxxxx>
• [PATCH] iio: common: hid-sensors: change the precision of scale values
  • From: "Ooi, Joyce" <joyce.ooi@xxxxxxxxx>
• Re: [PATCH 02/10] iio: adc: Add stm32 support
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH] iio: hid-sensor-attributes: Check sample_frequency/hysteresis write data legitimacy
  • From: Song Hongyan <hongyan.song@xxxxxxxxx>
• Re: TODO task for MMA8452 Accelerometer
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: TODO task for MMA8452 Accelerometer
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• Re: [PATCH V3 1/2] iio: adc: spmi-vadc: Update changes to support reporting of Raw adc code.
  • From: "Phani A, Rama Krishna" <rphani@xxxxxxxxxxxxxx>
• [PATCH v2] iio: adc: at91: add suspend and resume callback
  • From: Wenyou Yang <wenyou.yang@xxxxxxxxx>
• Re: [PATCH v1] iio: adc: at91: add suspend and resume callback
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
• [PATCH v9 2/5] iio: adc: mxs-lradc: Add support for adc driver
  • From: Ksenija Stanojevic <ksenija.stanojevic@xxxxxxxxx>
• [PATCH v9 1/5] mfd: mxs-lradc: Add support for mxs-lradc MFD
  • From: Ksenija Stanojevic <ksenija.stanojevic@xxxxxxxxx>
• [PATCH v9 3/5] input: touchscreen: mxs-lradc: Add support for touchscreen
  • From: Ksenija Stanojevic <ksenija.stanojevic@xxxxxxxxx>
• [PATCH v9 5/5] mfd: Move binding document
  • From: Ksenija Stanojevic <ksenija.stanojevic@xxxxxxxxx>
• [PATCH v9 4/5] iio: adc: mxs-lradc: Remove driver
  • From: Ksenija Stanojevic <ksenija.stanojevic@xxxxxxxxx>
• [PATCH v9 0/5] mxs-lradc: Split driver into MFD
  • From: Ksenija Stanojevic <ksenija.stanojevic@xxxxxxxxx>
• Re: [PATCH V1]iio: adc: spmi-vadc: Changes to support different scaling
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH v1] iio: adc: at91: add suspend and resume callback
  • From: Wenyou Yang <wenyou.yang@xxxxxxxxx>
• Re: [PATCH 1/6] staging: iio: set proper supply name to devm_regulator_get()
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v3] staging: iio: cdc: ad7746: add additional config defines
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V3 1/2] iio: adc: spmi-vadc: Update changes to support reporting of Raw adc code.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 2/2] iio: adc: add support for Allwinner SoCs ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V3 2/2] iio: adc: spmi-vadc: Changes to support different scaling
  • From: "Phani A, Rama Krishna" <rphani@xxxxxxxxxxxxxx>
• Re: [PATCH 1/6] staging: iio: set proper supply name to devm_regulator_get()
  • From: Matt Ranostay <matt@ranostay.consulting>
• [PATCH 1/6] staging: iio: set proper supply name to devm_regulator_get()
  • From: Eva Rachel Retuya <eraretuya@xxxxxxxxx>
• [PATCH 5/6] staging: iio: ad9832: add DVDD regulator
  • From: Eva Rachel Retuya <eraretuya@xxxxxxxxx>
• [PATCH 6/6] staging: iio: ad9832: clean-up regulator 'reg'
  • From: Eva Rachel Retuya <eraretuya@xxxxxxxxx>
• [PATCH 3/6] staging: iio: ad7192: add DVdd regulator
  • From: Eva Rachel Retuya <eraretuya@xxxxxxxxx>
• [PATCH 2/6] staging: iio: rework regulator handling
  • From: Eva Rachel Retuya <eraretuya@xxxxxxxxx>
• [PATCH 4/6] staging: iio: ad7192: rename regulator 'reg' to 'avdd'
  • From: Eva Rachel Retuya <eraretuya@xxxxxxxxx>
• [PATCH 0/6] staging: iio: regulator clean-up
  • From: Eva Rachel Retuya <eraretuya@xxxxxxxxx>
• Re: [PATCH] drivers: mfd: ti_am335x_tscadc: increase ADC ref clock to 24MHz
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH v6 2/2] iio: adc: add support for Allwinner SoCs ADC
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH V3 2/2] iio: adc: spmi-vadc: Changes to support different scaling
  • From: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
• Re: [PATCH V3 1/2] iio: adc: spmi-vadc: Update changes to support reporting of Raw adc code.
  • From: Rama Krishna Phani A <rphani@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] mfd: ti_am335x_tscadc: store physical address
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v3] staging: iio: cdc: ad7746: add additional config defines
  • From: Eva Rachel Retuya <eraretuya@xxxxxxxxx>
• Re: [PATCH v3] staging: iio: cdc: ad7746: add additional config defines
  • From: Eva Rachel Retuya <eraretuya@xxxxxxxxx>
• Re: [PATCH V3 2/2] iio: adc: spmi-vadc: Changes to support different scaling
  • From: Rama Krishna Phani A <rphani@xxxxxxxxxxxxxx>
• Re: [PATCH V3 2/2] iio: adc: spmi-vadc: Changes to support different scaling
  • From: Rama Krishna Phani A <rphani@xxxxxxxxxxxxxx>
• Re: [PATCH 01/10] staging: iio: tsl2583: add of_match table for device tree support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 6/8] drivers:input:ads7846(+tsc2046): add new common binding names, pre-calibration and flipping
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: accel: st_accel: add support to lng2dm
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• Re: [PATCH] iio: si7020: Add devicetree support and trivial bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 01/10] Documentation: dt-bindings: Document STM32 ADC DT bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] iio: hid-sensor-als: Add realtime data type parse support
  • From: "Pandruvada, Srinivas" <srinivas.pandruvada@xxxxxxxxx>
• Re: [PATCH] iio: hid-sensors: Increase the precision of scale
  • From: "Pandruvada, Srinivas" <srinivas.pandruvada@xxxxxxxxx>
• Re: [PATCH] iio: orientation: hid-sensor-rotation: Add PM function
  • From: "Pandruvada, Srinivas" <srinivas.pandruvada@xxxxxxxxx>
• Re: [PATCH v3 2/8] iio: inkern: add helpers to query available values from channels
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v3 7/8] dt-bindings: iio: document envelope-detector bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 5/8] dt-bindings: iio: document dpot-dac bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 4/8] dt-bindings: add axentia to vendor-prefixes
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 07/10] staging: iio: tsl2583: convert illuminance0_calibscale sysfs attr to use iio_chan_spec
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 07/10] staging: iio: tsl2583: convert illuminance0_calibscale sysfs attr to use iio_chan_spec
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [PATCH v3 6/8] iio: dpot-dac: DAC driver based on a digital potentiometer
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v3] staging: iio: cdc: ad7746: add additional config defines
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 10/10] staging: iio: tsl2583: add locking to sysfs attributes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 09/10] staging: iio: tsl2583: add error code to sysfs store functions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 08/10] staging: iio: tsl2583: use IIO_*_ATTR* macros to create sysfs entries
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 07/10] staging: iio: tsl2583: convert illuminance0_calibscale sysfs attr to use iio_chan_spec
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 06/10] staging: iio: tsl2583: convert to use iio_chan_spec and {read,write}_raw
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 6/8] iio: dpot-dac: DAC driver based on a digital potentiometer
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH 05/10] staging: iio: tsl2583: check return values from taos_chip_{on,off}
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 04/10] staging: iio: tsl2583: remove redundant power_state sysfs attribute
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 03/10] staging: iio: tsl2583: return proper error code instead of -1
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 02/10] staging: iio: tsl2583: check for error code from i2c_smbus_read_byte()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] staging: iio: cdc: ad7746: add additional config defines
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 01/10] staging: iio: tsl2583: add of_match table for device tree support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 01/10] staging: iio: tsl2583: add of_match table for device tree support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] staging: iio: cdc: ad7746: add additional config defines
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V3 2/2] iio: adc: spmi-vadc: Changes to support different scaling
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V3 1/2] iio: adc: spmi-vadc: Update changes to support reporting of Raw adc code.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V3 2/2] iio: adc: spmi-vadc: Changes to support different scaling
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 4/8] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] mfd: ti_am335x_tscadc: store physical address
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 2/2] iio: adc: add support for Allwinner SoCs ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] Documentation: dt: iio: accel: add lng2dm sensor device binding
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: accel: st_accel: add support to lng2dm
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: st_sensors: fix scale configuration for h3lis331dl
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 4/8] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: si7020: Add devicetree support and trivial bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: hid-sensor-als: Add realtime data type parse support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: hid-sensors: Increase the precision of scale
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: orientation: hid-sensor-rotation: Add PM function
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 8/8] iio: envelope-detector: ADC driver based on a DAC and a comparator
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH 03/10] iio: adc: stm32: add optional dma support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 6/8] iio: dpot-dac: DAC driver based on a digital potentiometer
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH 02/10] iio: adc: Add stm32 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/8] iio: inkern: add helpers to query available values from channels
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH 04/10] iio: adc: stm32: add optional support for exti gpios
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 05/10] iio: adc: stm32: add trigger polarity ext attr
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 06/10] iio: adc: stm32: add ext attrs to configure sampling time
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 8/8] iio: envelope-detector: ADC driver based on a DAC and a comparator
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 7/8] dt-bindings: iio: document envelope-detector bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 6/8] iio: dpot-dac: DAC driver based on a digital potentiometer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 5/8] dt-bindings: iio: document dpot-dac bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/8] iio: mcp4531: provide range of available raw values
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/8] iio: inkern: add helpers to query available values from channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/8] iio:core: add a callback to allow drivers to provide _available attributes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Question about submitting patch set against staging/iio/light/tsl2583
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH -next] iio: humidity: remove duplicated include from hts221_buffer.c
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH -next] iio: humidity: remove duplicated include from hts221_buffer.c
  • From: Wei Yongjun <weiyj.lk@xxxxxxxxx>
• [PATCH 05/10] staging: iio: tsl2583: check return values from taos_chip_{on,off}
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 03/10] staging: iio: tsl2583: return proper error code instead of -1
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 04/10] staging: iio: tsl2583: remove redundant power_state sysfs attribute
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 00/10] staging: iio: tsl2583: staging cleanups
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 06/10] staging: iio: tsl2583: convert to use iio_chan_spec and {read,write}_raw
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 01/10] staging: iio: tsl2583: add of_match table for device tree support
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 02/10] staging: iio: tsl2583: check for error code from i2c_smbus_read_byte()
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 08/10] staging: iio: tsl2583: use IIO_*_ATTR* macros to create sysfs entries
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 10/10] staging: iio: tsl2583: add locking to sysfs attributes
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 07/10] staging: iio: tsl2583: convert illuminance0_calibscale sysfs attr to use iio_chan_spec
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 09/10] staging: iio: tsl2583: add error code to sysfs store functions
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3] staging: iio: cdc: ad7746: add additional config defines
  • From: Eva Rachel Retuya <eraretuya@xxxxxxxxx>
• Re: [bug report] iio: adc: ti-adc161s626: add regulator support
  • From: Matt Ranostay <matt@ranostay.consulting>
• [PATCH] iio: hid-sensor-als: Add realtime data type parse support
  • From: Song Hongyan <hongyan.song@xxxxxxxxx>
• [PATCH] HID: sensor-hub: Fix packing of result buffer for feature report
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH] drivers: mfd: ti_am335x_tscadc: increase ADC ref clock to 24MHz
  • From: John Syne <john3909@xxxxxxxxx>
• Re: [PATCH V3 2/2] iio: adc: spmi-vadc: Changes to support different scaling
  • From: "Phani A, Rama Krishna" <rphani@xxxxxxxxxxxxxx>
• Re: [PATCH] drivers: mfd: ti_am335x_tscadc: increase ADC ref clock to 24MHz
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: [PATCH V3 2/2] iio: adc: spmi-vadc: Changes to support different scaling
  • From: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
• [PATCH v6 2/8] drivers:input:tsc2007: send pendown and penup only once like ads7846(+tsc2046) driver does
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v6 0/8] drivers: touchscreen: tsc2007 and ads7846/tsc2046 improvements (use common touchscreen bindings, pre-calibration, spi fix and provide iio raw values)
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v6 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v6 5/8] DT:omap3+tsc2007: use new common touchscreen bindings
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v6 8/8] DT:omap3+ads7846: use new common touchscreen bindings
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Question about submitting patch set against staging/iio/light/tsl2583
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH V3 2/2] iio: adc: spmi-vadc: Changes to support different scaling
  • From: Rama Krishna Phani A <rphani@xxxxxxxxxxxxxx>
• [PATCH V3 0/2] iio: adc: spmi-vadc: Changes to support different scaling
  • From: Rama Krishna Phani A <rphani@xxxxxxxxxxxxxx>
• [PATCH V3 1/2] iio: adc: spmi-vadc: Update changes to support reporting of Raw adc code.
  • From: Rama Krishna Phani A <rphani@xxxxxxxxxxxxxx>
• Re: [PATCH v8 1/5] mfd: mxs-lradc: Add support for mxs-lradc MFD
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v8 5/5] mfd: Move binding document
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH V2 2/2] iio: adc: spmi-vadc: Changes to support different scaling
  • From: Rama Krishna Phani A <rphani@xxxxxxxxxxxxxx>
• [PATCH V2 1/2] iio: adc: spmi-vadc: Update changes to support reporting of Raw adc code.
  • From: Rama Krishna Phani A <rphani@xxxxxxxxxxxxxx>
• [PATCH V2 0/2] iio: adc: spmi-vadc: Changes to support different scaling
  • From: Rama Krishna Phani A <rphani@xxxxxxxxxxxxxx>
• Re: [PATCH v7 0/5] mxs-lradc: Split driver into MFD
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v7 1/5] mfd: mxs-lradc: Add support for mxs-lradc MFD
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v7 5/5] mfd: Move binding document
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/4] mfd: ti_am335x_tscadc: store physical address
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH V1]iio: adc: spmi-vadc: Changes to support different scaling
  • From: "Phani A, Rama Krishna" <rphani@xxxxxxxxxxxxxx>
• RE: [PATCH V1]iio: adc: spmi-vadc: Changes to support different scaling
  • From: "Sricharan" <sricharan@xxxxxxxxxxxxxx>
• Re: [PATCH] staging: iio: cdc/ad7746: fix missing return value
  • From: Eva Rachel Retuya <eraretuya@xxxxxxxxx>
• Re: [PATCH V1]iio: adc: spmi-vadc: Changes to support different scaling
  • From: "Phani A, Rama Krishna" <rphani@xxxxxxxxxxxxxx>
• Re: [PATCH v6 1/2] mfd: add support for Allwinner SoCs ADC
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] drivers: mfd: ti_am335x_tscadc: increase ADC ref clock to 24MHz
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 2/2] Documentation: dt: iio: accel: add lng2dm sensor device binding
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• [PATCH 1/2] iio: accel: st_accel: add support to lng2dm
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• [PATCH 0/2] add support to lng2dm accel sensor
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• [PATCH] iio: st_sensors: fix scale configuration for h3lis331dl
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PATCH] iio: maxim_thermocouple: return -EINVAL on invalid read size
  • From: Colin Ian King <colin.king@xxxxxxxxxxxxx>
• [PATCH v5 6/8] drivers:input:ads7846(+tsc2046): add new common binding names, pre-calibration and flipping
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v5 2/8] drivers:input:tsc2007: send pendown and penup only once like ads7846(+tsc2046) driver does
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v5 7/8] drivers:input:ads7846(+tsc2046): fix spi module table
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v5 4/8] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v5 3/8] drivers:input:tsc2007: check for presence and power down tsc2007 during probe
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v5 0/8] drivers: touchscreen: tsc2007 and ads7846/tsc2046 improvements (use common touchscreen bindings, pre-calibration, spi fix and provide iio raw values)
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v5 5/8] DT:omap3+tsc2007: use new common touchscreen bindings
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v5 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v5 8/8] DT:omap3+ads7846: use new common touchscreen bindings
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH] iio: si7020: Add devicetree support and trivial bindings
  • From: Paul Kocialkowski <contact@xxxxxxxx>
• [bug report] iio: adc: ti-adc161s626: add regulator support
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] iio: maxim_thermocouple: return -EINVAL on invalid read size
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH] iio: maxim_thermocouple: return -EINVAL on invalid read size
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH] staging: iio: cdc: ad7746: set ret on IIO_VOLTAGE case
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH] staging: iio: cdc: ad7746: set ret on IIO_VOLTAGE case
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH] [v2] staging: iio: ad5933: avoid uninitialized variable in error case
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 4/4] platform/chrome: cros_ec_dev - Register cros-ec sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 3/4] platform/chrome: Introduce a new function to check EC features.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/4] iio: cros_ec_sensors: add ChromeOS EC Contiguous Sensors driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/4] iio: cros_ec_sensors_core: Add common functions for the ChromeOS EC Sensor Hub.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] [v2] staging: iio: ad5933: avoid uninitialized variable in error case
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] [v2] staging: iio: ad5933: avoid uninitialized variable in error case
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 4/8] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 04/10] iio: adc: stm32: add optional support for exti gpios
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH] iio: maxim_thermocouple: detect invalid storage size in read()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 01/10] Documentation: dt-bindings: Document STM32 ADC DT bindings
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 03/10] iio: adc: stm32: add optional dma support
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 07/10] ARM: configs: stm32: enable IIO ADC driver
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 10/10] ARM: dts: stm32f429: Add dma support to adc
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 05/10] iio: adc: stm32: add trigger polarity ext attr
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 09/10] ARM: dts: stm32f429: enable adc on eval board
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 02/10] iio: adc: Add stm32 support
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH] staging: iio: cdc/ad7746: fix missing return value
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 06/10] iio: adc: stm32: add ext attrs to configure sampling time
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 08/10] ARM: dts: stm32f429: Add adc support
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 00/10] Add support for STM32 ADC
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH 2/2 v6] iio: gyro: Add driver for the MPU-3050 gyroscope
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2 v6] iio: gyro: Add MPU-3050 device tree bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] staging: iio: cdc/ad7746: fix missing return value
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH] iio: maxim_thermocouple: detect invalid storage size in read()
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] drivers: mfd: ti_am335x_tscadc: increase ADC ref clock to 24MHz
  • From: John Syne <john3909@xxxxxxxxx>
• Re: [PATCH] drivers: mfd: ti_am335x_tscadc: increase ADC ref clock to 24MHz
  • From: John Syne <john3909@xxxxxxxxx>
• [PATCH 2/2 v6] iio: gyro: Add driver for the MPU-3050 gyroscope
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/2 v6] iio: gyro: Add MPU-3050 device tree bindings
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• RE: [PATCH V1]iio: adc: spmi-vadc: Changes to support different scaling
  • From: "Sricharan" <sricharan@xxxxxxxxxxxxxx>
• Re: [PATCH] drivers: mfd: ti_am335x_tscadc: increase ADC ref clock to 24MHz
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH] drivers: mfd: ti_am335x_tscadc: increase ADC ref clock to 24MHz
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] drivers: mfd: ti_am335x_tscadc: increase ADC ref clock to 24MHz
  • From: John Syne <john3909@xxxxxxxxx>
• Re: [PATCH] drivers: mfd: ti_am335x_tscadc: increase ADC ref clock to 24MHz
  • From: John Syne <john3909@xxxxxxxxx>
• Re: [PATCH] drivers: mfd: ti_am335x_tscadc: increase ADC ref clock to 24MHz
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [PATCH V1]iio: adc: spmi-vadc: Changes to support different scaling
  • From: Rama Krishna Phani A <rphani@xxxxxxxxxxxxxx>
• [PATCH] iio: hid-sensors: Increase the precision of scale
  • From: Song Hongyan <hongyan.song@xxxxxxxxx>
• [PATCH] iio: orientation: hid-sensor-rotation: Add PM function
  • From: Song Hongyan <hongyan.song@xxxxxxxxx>
• Re: [PATCH] drivers: mfd: ti_am335x_tscadc: increase ADC ref clock to 24MHz
  • From: John Syne <john3909@xxxxxxxxx>
• Re: [PATCH v4 4/8] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH] [v2] staging: iio: ad5933: avoid uninitialized variable in error case
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] iio: common: st_sensors: fix channel data parsing
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PATCH v3 4/5] iio: dac: mcp4725: support voltage reference selection
  • From: Tomas Novotny <tomas@xxxxxxxxxx>
• Re: [PULL] First set of new drivers, features and cleanups for IIO in the 4.10 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/7] iio: light: tsl2583: add locking to sysfs *_store() functions
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH v3 1/8] iio:core: add a callback to allow drivers to provide _available attributes
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PULL] First round of IIO fixes for the 4.9 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC] multipixel infrared thermopile sensors
  • From: Matt Ranostay <matt@ranostay.consulting>
• [PATCH] drivers: mfd: ti_am335x_tscadc: increase ADC ref clock to 24MHz
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [PATCH v3 8/8] iio: envelope-detector: ADC driver based on a DAC and a comparator
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v3 3/8] iio: mcp4531: provide range of available raw values
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v3 0/8] IIO wrapper drivers, dpot-dac and envelope-detector
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v3 7/8] dt-bindings: iio: document envelope-detector bindings
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v3 5/8] dt-bindings: iio: document dpot-dac bindings
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v3 6/8] iio: dpot-dac: DAC driver based on a digital potentiometer
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v3 4/8] dt-bindings: add axentia to vendor-prefixes
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v3 2/8] iio: inkern: add helpers to query available values from channels
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v2 1/7] iio:core: add a callback to allow drivers to provide _available attributes
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PULL] First round of IIO fixes for the 4.9 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 14/28] iio: accel: sca3000_core: avoid potentially uninitialized variable
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL] First set of new drivers, features and cleanups for IIO in the 4.10 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 4/8] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v4 4/8] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 4/8] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5] staging: iio: cdc: ad7152: Implement IIO_CHAN_INFO_SAMP_FREQ attribute
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 4/8] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v8 1/5] mfd: mxs-lradc: Add support for mxs-lradc MFD
  • From: Ksenija Stanojevic <ksenija.stanojevic@xxxxxxxxx>
• [PATCH v8 2/5] iio: adc: mxs-lradc: Add support for adc driver
  • From: Ksenija Stanojevic <ksenija.stanojevic@xxxxxxxxx>
• [PATCH v8 4/5] iio: adc: mxs-lradc: Remove driver
  • From: Ksenija Stanojevic <ksenija.stanojevic@xxxxxxxxx>
• [PATCH v8 5/5] mfd: Move binding document
  • From: Ksenija Stanojevic <ksenija.stanojevic@xxxxxxxxx>
• [PATCH v8 3/5] input: touchscreen: mxs-lradc: Add support for touchscreen
  • From: Ksenija Stanojevic <ksenija.stanojevic@xxxxxxxxx>
• [PATCH v8 0/5] mxs-lradc: Split driver into MFD
  • From: Ksenija Stanojevic <ksenija.stanojevic@xxxxxxxxx>
• Re: [PATCH v2 6/7] dt-bindings: iio: document envelope-detector bindings
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v4 4/8] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [RFC] multipixel infrared thermopile sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 7/7] iio: envelope-detector: ADC driver based on a DAC and a comparator
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 5/7] iio: dpot-dac: DAC driver based on a digital potentiometer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/7] iio: mcp4531: provide range of available raw values
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/7] iio:core: add a callback to allow drivers to provide _available attributes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 4/8] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: dac: mcp4725: fix odd_ptr_err.cocci warnings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/7] dt-bindings: iio: document dpot-dac bindings
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH v2 1/7] iio:core: add a callback to allow drivers to provide _available attributes
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v2 2/7] iio: mcp4531: provide range of available raw values
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v2 7/7] iio: envelope-detector: ADC driver based on a DAC and a comparator
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v2 6/7] dt-bindings: iio: document envelope-detector bindings
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v2 4/7] dt-bindings: iio: document dpot-dac bindings
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v2 0/7] IIO wrapper drivers, dpot-dac and envelope-detector
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v2 3/7] dt-bindings: add axentia to vendor-prefixes
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v2 5/7] iio: dpot-dac: DAC driver based on a digital potentiometer
  • From: Peter Rosin <peda@xxxxxxxxxx>