On 14/01/17 18:00, David Lechner wrote:
> On 01/14/2017 06:53 AM, Jonathan Cameron wrote:
>> On 11/01/17 17:52, David Lechner wrote:
>>> This adds device tree bindings for the TI ADS7950 family of A/DC chips.
>>>
>>> Signed-off-by: David Lechner <david@xxxxxxxxxxxxxx>
>> This is in of itself good, but we may need to have some deprecated
>> elements to continue supporting what was implicitly happening with
>> the missnaming so as to avoid accidentally breaking someone's device
>> tree.
>>
>
> As I mentioned in my cover letter, this driver, as far as I can tell,
> only exists in your testing branch, so I find it highly unlikely that
> we would be breaking anyone. It is not in mainline and it is not even
> in linux-next.
Oops, I not only have a memory like a goldfish, I clearly didn't read your
cover letter either.
Applied to the togreg branch of iio.git and pushed out as testing.
The driver will hit next before this does but will get into mainline
in the same ultimate pull request unless something weird happens so that's
all fine.
Jonathan
>> Jonathan
>>> ---
>>> .../devicetree/bindings/iio/adc/ti-ads7950.txt | 23 ++++++++++++++++++++++
>>> 1 file changed, 23 insertions(+)
>>> create mode 100644 Documentation/devicetree/bindings/iio/adc/ti-ads7950.txt
>>>
>>> diff --git a/Documentation/devicetree/bindings/iio/adc/ti-ads7950.txt b/Documentation/devicetree/bindings/iio/adc/ti-ads7950.txt
>>> new file mode 100644
>>> index 0000000..e77a6f7
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/iio/adc/ti-ads7950.txt
>>> @@ -0,0 +1,23 @@
>>> +* Texas Instruments ADS7950 family of A/DC chips
>>> +
>>> +Required properties:
>>> + - compatible: Must be one of "ti,ads7950", "ti,ads7951", "ti,ads7952",
>>> + "ti,ads7953", "ti,ads7954", "ti,ads7955", "ti,ads7956", "ti,ads7957",
>>> + "ti,ads7958", "ti,ads7959", "ti,ads7960", or "ti,ads7961"
>>> + - reg: SPI chip select number for the device
>>> + - #io-channel-cells: Must be 1 as per ../iio-bindings.txt
>>> + - vref-supply: phandle to a regulator node that supplies the 2.5V or 5V
>>> + reference voltage
>>> +
>>> +Recommended properties:
>>> + - spi-max-frequency: Definition as per
>>> + Documentation/devicetree/bindings/spi/spi-bus.txt
>>> +
>>> +Example:
>>> +adc@0 {
>>> + compatible = "ti,ads7957";
>>> + reg = <0>;
>>> + #io-channel-cells = <1>;
>>> + vref-supply = <&refin_supply>;
>>> + spi-max-frequency = <10000000>;
>>> +};
>>>
>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
