This patch adds documentation of device tree bindings for the
STM32 DFSDM ADC.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
---
.../bindings/iio/adc/st,stm32-dfsdm-adc.txt | 60 ++++++++++++++++++++++
1 file changed, 60 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt
new file mode 100644
index 0000000..c156bcb
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt
@@ -0,0 +1,60 @@
+STMicroelectronics STM32 DFSDM ADC device driver
+
+STM32 DFSDM ADC is a sigma delta analog-to-digital converter.
+It has to be declared in device-tree as a subnode of the DFSDM mfd node.
+
+It has several multiplexed input channels. Conversions can be performed
+in single, scan or discontinuous mode. Conversions can be launched in software
+or using hardware triggers.
+Each instance of the driver uses one filter instance handle by the DFSDM mfd
+driver.
+
+DFSDM also offers extra features:
+-The analog watchdog feature allows the application to detect if the
+ input voltage goes beyond the user-defined, higher or lower thresholds.
+-The short circuit detection allows allows the application to detect if the
+ input is in CC.
+-The clock absence detection allows application to detect if SPI input is clocked.
+
+Required properties:
+- compatible: Must be "st,stm32-dfsdm-adc".
+- reg: Specifies the DFSDM filter instance.
+- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers".
+- st,adc-channels: List of single-ended channels muxed for this ADC.
+- st,adc-channel-names: List of single-ended channels Name.
+
+Optional properties:
+- st,adc-channel-types: Single-ended channel input type. Default value is 0.
+ - 0: SPI with data on rising edge (default)
+ - 1: SPI with data on falling edge
+ - 2: manchester codec, rising edage = logic 0
+ - 3: manchester codec, rising edage = logic 1
+- st,adc-channel-clk-src: Conversion clock source. default value is 1.
+ - 0: External SPI clocl (CLKIN x)
+ - 1: internal SPI clock (CLKOUT) (default)
+ - 2: internal SPI clock divided by 2 (falling edge).
+ - 2: internal SPI clock divided by 2 (rising edge).
+- st,adc-alt-channel: must be defined if Two ADCs are connected on same SPI
+ input.
+ If not set channel n is connected to SPI input n.
+ If set channel n is connected to SPI input n + 1.
+
+Example:
+ dfsdm: dfsdm@4400D000 {
+ iio_dfsdm0: iio-dfsdm@0 {
+ compatible = "st,stm32-dfsdm-adc";
+ #io-channel-cells = <1>;
+ reg = <0>;
+ st,adc-channels = <1>;
+ st,adc-channel-names = "in0";
+ };
+ iio_dfsdm1: iio-dfsdm@1 {
+ compatible = "st,stm32-dfsdm-adc";
+ #io-channel-cells = <1>;
+ reg = <1>;
+ st,adc-channels = <1>;
+ st,adc-channel-names = "in1";
+ st,adc-channel-types = <1>;
+ st,adc-alt-channel = <1>;
+ };
+ };
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
