Hi Peter,
On 19/01/2017 19:15, Peter Meerwald-Stadler wrote:
Add iio driver for Maxim MAX11100 single-channel ADC.
minor comments, maybe Jonathan can fix it up when taking this...
+struct max11100_state {
+ const struct max11100_chip_desc *desc;
+ struct regulator *vref_reg;
+ struct spi_device *spi;
+
+ /*
+ * DMA (thus cache coherency maintenance) requires the
+ * transfer buffers to live in their own cache lines.
+ */
+ u8 buffer[3] ____cacheline_aligned;
+};
+
+static struct iio_chan_spec max11100_channels[] = {
+ { /* [0] */
+ .type = IIO_VOLTAGE,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE),
+ },
+};
+
+static struct max11100_chip_desc {
+ unsigned int num_chan;
+ const struct iio_chan_spec *channels;
+} max11100_desc = {
+ .num_chan = ARRAY_SIZE(max11100_channels),
+ .channels = max11100_channels,
+};
for just one supported chip, this is more complicated than necessary...
I can get rid of this, yes, but it's much nicer than hard-coding those
values in indio_dev fields ;)
+
+static int max11100_read_single(struct iio_dev *indio_dev, int *val)
+{
+ int ret;
+ struct max11100_state *state = iio_priv(indio_dev);
+
+ ret = spi_read(state->spi, state->buffer, sizeof(state->buffer));
+ if (ret) {
+ dev_err(&indio_dev->dev, "SPI transfer failed\n");
+ return ret;
+ }
+
+ /* the first 8 bits sent out from ADC must be 0s */
+ if (state->buffer[0]) {
+ dev_err(&indio_dev->dev, "Invalid value: buffer[0] != 0\n");
+ return -EINVAL;
+ }
+
+ *val = (state->buffer[1] << 8) | state->buffer[2];
+
+ return 0;
+}
+
+static int max11100_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long info)
+{
+ int ret, vref_uv;
+ struct max11100_state *state = iio_priv(indio_dev);
+
+ switch (info) {
+ case IIO_CHAN_INFO_RAW:
+ ret = max11100_read_single(indio_dev, val);
+ if (ret)
+ return ret;
+
+ return IIO_VAL_INT;
+
+ case IIO_CHAN_INFO_SCALE:
+ vref_uv = regulator_get_voltage(state->vref_reg);
+ if (vref_uv < 0)
+ /* dummy regulator "get_voltage" returns -EINVAL */
+ return -EINVAL;
+
+ *val = vref_uv / 1000;
+ *val2 = MAX11100_LSB_DIV;
+ return IIO_VAL_FRACTIONAL;
+ }
+
+ return -EINVAL;
+}
+
+static const struct iio_info max11100_info = {
+ .driver_module = THIS_MODULE,
+ .read_raw = max11100_read_raw,
+};
+
+static int max11100_probe(struct spi_device *spi)
+{
+ int ret;
+ struct iio_dev *indio_dev;
+ struct max11100_state *state;
+
+ indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*state));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ spi_set_drvdata(spi, indio_dev);
+
+ state = iio_priv(indio_dev);
+ state->spi = spi;
+ state->desc = &max11100_desc;
+
+ indio_dev->dev.parent = &spi->dev;
+ indio_dev->dev.of_node = spi->dev.of_node;
+ indio_dev->name = "max11100";
+ indio_dev->info = &max11100_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = state->desc->channels;
+ indio_dev->num_channels = state->desc->num_chan;
+
+ state->vref_reg = devm_regulator_get(&spi->dev, "vref");
+ if (IS_ERR(state->vref_reg))
+ return PTR_ERR(state->vref_reg);
+
+ ret = regulator_enable(state->vref_reg);
+ if (ret)
+ return ret;
+
+ ret = iio_device_register(indio_dev);
+ if (ret)
+ goto disable_regulator;
+
+ return 0;
+
+disable_regulator:
+ regulator_disable(state->vref_reg);
+
+ return ret;
+}
+
+static int max11100_remove(struct spi_device *spi)
+{
+ struct iio_dev *indio_dev = spi_get_drvdata(spi);
+ struct max11100_state *state = iio_priv(indio_dev);
+
+ regulator_disable(state->vref_reg);
should be the other way around, first _unregister(), then
regulator_disable()
reverse order as in _probe()
Yeah, that's right...
Let's see, I can send v6 with no issues, or Jonathan can do that if he
prefers to.
Just let me know :)
Thanks
j
+
+ iio_device_unregister(indio_dev);
+
+ return 0;
+}
+
+static const struct of_device_id max11100_ids[] = {
+ {.compatible = "maxim,max11100"},
+ { },
+};
+MODULE_DEVICE_TABLE(of, max11100_ids);
+
+static struct spi_driver max11100_driver = {
+ .driver = {
+ .name = "max11100",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(max11100_ids),
+ },
+ .probe = max11100_probe,
+ .remove = max11100_remove,
+};
+
+module_spi_driver(max11100_driver);
+
+MODULE_AUTHOR("Jacopo Mondi <jacopo@xxxxxxxxxx>");
+MODULE_DESCRIPTION("Maxim max11100 ADC Driver");
+MODULE_LICENSE("GPL v2");
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
