On 19/01/17 14:58, Martin Blumenstingl wrote:
> This adds the devicetree binding documentation for the SAR ADC found in
> Amlogic Meson SoCs.
> Currently only the GXBB, GXL and GXM SoCs are supported.
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
> Tested-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
Looks straight forward to me, but there is just enough here that I'm looking
for an Ack from Rob or Mark.
Thanks,
Jonathan
> ---
> .../bindings/iio/adc/amlogic,meson-saradc.txt | 31 ++++++++++++++++++++++
> 1 file changed, 31 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt
> new file mode 100644
> index 000000000000..9a0bec7afc63
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt
> @@ -0,0 +1,31 @@
> +* Amlogic Meson SAR (Successive Approximation Register) A/D converter
> +
> +Required properties:
> +- compatible: depending on the SoC this should be one of:
> + - "amlogic,meson-gxbb-saradc" for GXBB
> + - "amlogic,meson-gxl-saradc" for GXL and GXM
> + along with the generic "amlogic,meson-saradc"
> +- reg: the physical base address and length of the registers
> +- clocks: phandle and clock identifier (see clock-names)
> +- clock-names: mandatory clocks:
> + - "clkin" for the reference clock (typically XTAL)
> + - "core" for the SAR ADC core clock
> + optional clocks:
> + - "sana" for the analog clock
> + - "adc_clk" for the ADC (sampling) clock
> + - "adc_sel" for the ADC (sampling) clock mux
> +- vref-supply: the regulator supply for the ADC reference voltage
> +- #io-channel-cells: must be 1, see ../iio-bindings.txt
> +
> +Example:
> + saradc: adc@8680 {
> + compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc";
> + #io-channel-cells = <1>;
> + reg = <0x0 0x8680 0x0 0x34>;
> + clocks = <&xtal>,
> + <&clkc CLKID_SAR_ADC>,
> + <&clkc CLKID_SANA>,
> + <&clkc CLKID_SAR_ADC_CLK>,
> + <&clkc CLKID_SAR_ADC_SEL>;
> + clock-names = "clkin", "core", "sana", "adc_clk", "adc_sel";
> + };
>
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
