Add bindings information for STM32 Digital Filter for Sigma Delta modulators MFD driver
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
---
.../devicetree/bindings/mfd/stm32-dfsdm.txt | 68 ++++++++++++++++++++++
1 file changed, 68 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/stm32-dfsdm.txt
diff --git a/Documentation/devicetree/bindings/mfd/stm32-dfsdm.txt b/Documentation/devicetree/bindings/mfd/stm32-dfsdm.txt
new file mode 100644
index 0000000..e0b45ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/stm32-dfsdm.txt
@@ -0,0 +1,68 @@
+STMicroelectronics STM32 Digital Filter for Sigma Delta Modulator (DFSDM)
+ulti-function device.
+
+The STM32 DFSDM device is a multifunction device that handles the DFSDM IP.
+
+The DFSDM IP allows to add processing on Sigma Delta ADC based on SinC filters.
+For this, a pool of m filters can be connected to a pool of n channels.
+For STM32H7 : m = 4, n = 8.
+
+Each channel n is assigned to the SPI or Manchester interface n or n + 1.
+Channels 0 to 2 can also be connected to ADC IP instance 1 to 3.
+Filtering result is stored in a left aligned register, with 8 LSB reserved for
+the input channel ID.
+
+Each filter instance supports two contexts to manage conversions, each one has
+its own configurable sequence and trigger:
+- regular conversion: used for single or continuous conversion.
+- injected conversions: used for triggered conversion.
+
+Interfaces supported:
+- sigma delta ADCs trough IIO framework.
+- PDM microphones through ASoC framework.
+
+Required properties:
+- compatible: Must be "st,stm32h7-dfsdm".
+- reg: Specifies the DFSDM block register address and length.
+- interrupts: IRQ lines connected to each DFSDM filter instance.
+- clocks: IP and serial interfaces clocking. Should be set according
+ to rcc clock ID and "clock-names".
+- clock-names: Input clock name "dfsdm_clk" must be defined,
+ "audio_clk" is optional. If defined CLKOUT is based on the audio
+ clock, else "dfsdm_clk" is used.
+
+Optional properties:
+- st,clkout-freq: clkout clock frequency (Hz).This clock must be set according
+ to "clock" property. Frequency must be a multiple of the rcc
+ clock frequency. If not, clkout frequency will not be
+ accurate.
+- pinctrl-names: set to "default".
+- pinctrl-0: List of phandles pointing to pin configuration nodes for DFSDM
+ module.
+ For Pinctrl properties see ../pinctrl/pinctrl-bindings.txt
+Example :
+ dfsdm: dfsdm@4400D000 {
+ compatible = "st,stm32h7-dfsdm";
+ reg = <0x40017000 0x400>;
+ interrupts = <110>, <111>, <112>, <113>;
+ clocks = <&timer_clk>;
+ clock-names = "dfsdm_clk";
+ pinctrl-0 = <&dfsdm_ch0 &dfsdm_ch1>;
+ pinctrl-names = "default";
+ st,clkout-freq = <2480000>;
+
+ iio_dfsdm0: iio-dfsdm@0 {
+ compatible = "st,stm32-dfsdm-adc";
+ #io-channel-cells = <1>;
+ reg = <0>;
+ status = "disabled";
+ };
+ dai_dfsdm0: dfsdm-audio@0 {
+ compatible = "st,stm32-dfsdm-audio";
+ #sound-dai-cells = <0>;
+ reg = <0>;
+ dmas = <&dmamux1 101 0x400 0x00>;
+ dma-names = "rx";
+ status = "disabled";
+ };
+ };
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
