On 01/27/2017 11:15 AM, Lee Jones wrote: > On Tue, 24 Jan 2017, Arnaud Pouliquen wrote: > >> >> >> On 01/24/2017 12:36 PM, Lee Jones wrote: >>> On Tue, 24 Jan 2017, Arnaud Pouliquen wrote: >>>> On 01/24/2017 09:22 AM, Lee Jones wrote: >>>>> On Mon, 23 Jan 2017, Arnaud Pouliquen wrote: >>>>> >>>>>> DFSDM hardware IP can be used at the same time for ADC sigma delta >>>>> >>>>> Same time as what? >>>> DFSDM is used for ADC acquisition (through IIO) but also PDM microphone >>>> capture (through ASOC). >>>>> >>>>>> conversion and audio PDM microphone. >>>>>> MFD driver is in charge of configuring IP registers and managing IP clocks. >>>>>> For this it exports an API to handles filters and channels resources. >>>>> >>>>> This looks like an ADC driver? What is it that makes it an MFD? >>>> Yes it a kind of ADC but that supports 2 features audio and iio. >>>> So it has to support 2 features based on 2 separate Frameworks. >>> >>> I'm still unsure why it needs to live in MFD. >>> >>> By the looks of it, this driver needs to move into IIO and you need to >>> call into it from ASoC. >>> >> >> I think i introduce confusion by speaking about ADC for audio... >> >> 1) IIO handles sigma delta ADCs that can be used as example for motor >> controls. the aim is to get value based on an application request or >> using some triggers. >> example: http://www.ti.com/lit/ds/symlink/ads1202.pdf >> >> 2) For audio part, we speak about Digital mems microphones that generate >> PDM format stream. PDM is a continuous real time stream dedicated to >> audio record and must be handled in ASOC ( codec Dmic part driver is >> /sound/soc/codec/dmic.c). >> DMIC example: >> http://www.st.com/content/ccc/resource/technical/document/datasheet/47/bd/d2/13/8d/fd/48/26/DM00121815.pdf/files/DM00121815.pdf/jcr:content/translations/en.DM00121815.pdf >> >> Form my point of view it very strange to handle DMICs in IIO, as it is >> not designed to support audio streams.it is two separate features that >> are not compatible. >> >> Now, from software point of view >> That would means that IIO declares ADCs that it can not expose, because >> DMIC is not IIO standard. But IIO inkern API needs that device is >> declared > >> So i should define a specific API in IIO for ASOC driver. > > Yes, this is what I think you should do. > > MFD is not a dumping ground for devices that do not fit anywhere else. I fully understand that you don't want to create unnecessary MFD devices. But In case of DFSDM ,it is really a device that supports 2 features. The main evidence is that "ADC acquisition" and "digital microphone" features are handled by two separate frameworks. So this corresponds to two features that share the same device resources (registers, IRQs, clocks). Seems that this match with MFD definition. Now, if IIO and ASOC maintainers are aligned with you proposal, i will move MFD part in IIO. But in this case, i can not see another way to do it, except a MFD driver hidden in IIO? Here is my analysis of a design in IIO: Natural way to do this is to consider that ASOC is a customer of IIO so use the customer.h API. 1) As Digital microphone can not be handled by IIO dev interface, i can not expose them as an IIO channel, that would be visible by applications in /sys/bus/iio/devices/iio 2) ASOC needs to configure DFSDM filter to match to specific frequencies and sample formats requested by users. Not standard IIO interface to do this. (on IIO side this is done by attribute file) 3) audio stream is a real time stream. So for audio quality best is to minimize latencies and Xrun. That why transfer as done from HW to application using LLI DMA transfers with a minimum of copy. This does not match with the IIO inkern API. => So seems not possible to use IIO inkern API. That's means that i would need to create a ST specific include file to offer an API to ASoC to handle DFSDM resources linked to the DMIC. and to probe ASOc device in IIO one. So the solution would be to create something like a sub IIO driver That probe and handle some IIO and ASOC devices. Ultimately This would correspond to a MFD driver integrated in IIO... Jonathan, Mark, Please could you share your opinion on this topic? Regards Arnaud > >>>>>> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx> >>>>>> --- >>>>>> drivers/mfd/Kconfig | 11 + >>>>>> drivers/mfd/Makefile | 2 + >>>>>> drivers/mfd/stm32-dfsdm-reg.h | 220 +++++++++ >>>>>> drivers/mfd/stm32-dfsdm.c | 1044 +++++++++++++++++++++++++++++++++++++++ >>>>>> include/linux/mfd/stm32-dfsdm.h | 324 ++++++++++++ >>>>>> 5 files changed, 1601 insertions(+) >>>>>> create mode 100644 drivers/mfd/stm32-dfsdm-reg.h >>>>>> create mode 100644 drivers/mfd/stm32-dfsdm.c >>>>>> create mode 100644 include/linux/mfd/stm32-dfsdm.h >>>>>> >>>>>> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig >>>>>> index c6df644..4bb660b 100644 >>>>>> --- a/drivers/mfd/Kconfig >>>>>> +++ b/drivers/mfd/Kconfig >>>>>> @@ -1607,6 +1607,17 @@ config MFD_STW481X >>>>>> in various ST Microelectronics and ST-Ericsson embedded >>>>>> Nomadik series. >>>>>> >>>>>> +config MFD_STM32_DFSDM >>>>>> + tristate "ST Microelectronics STM32 DFSDM" >>>>>> + depends on (ARCH_STM32 && OF) || COMPILE_TEST >>>>>> + select MFD_CORE >>>>>> + select REGMAP >>>>>> + select REGMAP_MMIO >>>>>> + help >>>>>> + Select this option to enable the STM32 Digital Filter >>>>>> + for Sigma Delta Modulators (DFSDM) driver used >>>>>> + in various STM32 series. >>>>>> + >>>>>> menu "Multimedia Capabilities Port drivers" >>>>>> depends on ARCH_SA1100 >>>>> >>>>> [...] >>>>> >>>> >>>> Regards >>>> Arnaud >>> > -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
