On 26/01/17 14:28, Fabrice Gasnier wrote:
> STM32 ADC has external timer trigger sources. Use stm32 timer triggers
> API (e.g. is_stm32_timer_trigger()) with local ADC lookup table to
> validate a trigger can be used.
> This also provides correct trigger selection value (e.g. extsel).
>
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
Applied to the togreg branch of iio.git.
Thanks,
Jonathan
> ---
> Changes in v2:
> - Add comment on dual check to validate trigger (and get extsel)
> ---
> drivers/iio/adc/Kconfig | 2 ++
> drivers/iio/adc/stm32-adc.c | 65 +++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 67 insertions(+)
>
> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> index 33341f4..9a7b090 100644
> --- a/drivers/iio/adc/Kconfig
> +++ b/drivers/iio/adc/Kconfig
> @@ -447,6 +447,8 @@ config STM32_ADC_CORE
> depends on OF
> depends on REGULATOR
> select IIO_BUFFER
> + select MFD_STM32_TIMERS
> + select IIO_STM32_TIMER_TRIGGER
> select IIO_TRIGGERED_BUFFER
> help
> Select this option to enable the core driver for STMicroelectronics
> diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
> index 1e382b6..87d984b 100644
> --- a/drivers/iio/adc/stm32-adc.c
> +++ b/drivers/iio/adc/stm32-adc.c
> @@ -23,6 +23,7 @@
> #include <linux/delay.h>
> #include <linux/iio/iio.h>
> #include <linux/iio/buffer.h>
> +#include <linux/iio/timer/stm32-timer-trigger.h>
> #include <linux/iio/trigger.h>
> #include <linux/iio/trigger_consumer.h>
> #include <linux/iio/triggered_buffer.h>
> @@ -81,6 +82,36 @@ enum stm32_adc_exten {
> STM32_EXTEN_HWTRIG_BOTH_EDGES,
> };
>
> +/* extsel - trigger mux selection value */
> +enum stm32_adc_extsel {
> + STM32_EXT0,
> + STM32_EXT1,
> + STM32_EXT2,
> + STM32_EXT3,
> + STM32_EXT4,
> + STM32_EXT5,
> + STM32_EXT6,
> + STM32_EXT7,
> + STM32_EXT8,
> + STM32_EXT9,
> + STM32_EXT10,
> + STM32_EXT11,
> + STM32_EXT12,
> + STM32_EXT13,
> + STM32_EXT14,
> + STM32_EXT15,
> +};
> +
> +/**
> + * struct stm32_adc_trig_info - ADC trigger info
> + * @name: name of the trigger, corresponding to its source
> + * @extsel: trigger selection
> + */
> +struct stm32_adc_trig_info {
> + const char *name;
> + enum stm32_adc_extsel extsel;
> +};
> +
> /**
> * stm32_adc_regs - stm32 ADC misc registers & bitfield desc
> * @reg: register offset
> @@ -176,6 +207,26 @@ struct stm32_adc_chan_spec {
> { STM32F4_ADC_SQR1, GENMASK(19, 15), 15 },
> };
>
> +/* STM32F4 external trigger sources for all instances */
> +static struct stm32_adc_trig_info stm32f4_adc_trigs[] = {
> + { TIM1_CH1, STM32_EXT0 },
> + { TIM1_CH2, STM32_EXT1 },
> + { TIM1_CH3, STM32_EXT2 },
> + { TIM2_CH2, STM32_EXT3 },
> + { TIM2_CH3, STM32_EXT4 },
> + { TIM2_CH4, STM32_EXT5 },
> + { TIM2_TRGO, STM32_EXT6 },
> + { TIM3_CH1, STM32_EXT7 },
> + { TIM3_TRGO, STM32_EXT8 },
> + { TIM4_CH4, STM32_EXT9 },
> + { TIM5_CH1, STM32_EXT10 },
> + { TIM5_CH2, STM32_EXT11 },
> + { TIM5_CH3, STM32_EXT12 },
> + { TIM8_CH1, STM32_EXT13 },
> + { TIM8_TRGO, STM32_EXT14 },
> + {}, /* sentinel */
> +};
> +
> /**
> * STM32 ADC registers access routines
> * @adc: stm32 adc instance
> @@ -318,6 +369,20 @@ static int stm32_adc_conf_scan_seq(struct iio_dev *indio_dev,
> */
> static int stm32_adc_get_trig_extsel(struct iio_trigger *trig)
> {
> + int i;
> +
> + /* lookup triggers registered by stm32 timer trigger driver */
> + for (i = 0; stm32f4_adc_trigs[i].name; i++) {
> + /**
> + * Checking both stm32 timer trigger type and trig name
> + * should be safe against arbitrary trigger names.
> + */
> + if (is_stm32_timer_trigger(trig) &&
> + !strcmp(stm32f4_adc_trigs[i].name, trig->name)) {
> + return stm32f4_adc_trigs[i].extsel;
> + }
> + }
> +
> return -EINVAL;
> }
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
