Am 19.01.2017 um 15:58 schrieb Martin Blumenstingl:
> Add the SAR ADC to meson-gxbb.dtsi and meson-gxl.dtsi. GXBB provides a
> 10-bit ADC while GXL (and GXM, which uses the same ADC as GXL) provides
> a 12-bit ADC.
> Some boards use resistor ladder buttons connected through one of the ADC
> channels. On newer devices (GXL and GXM) some boards use pull-ups/downs
> to change the resistance (and thus the ADC value) on of the ADC channels
"on one of"?
> to indicate the board revision.
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
> Tested-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 8 ++++++++
> arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 10 ++++++++++
> arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 10 ++++++++++
> 3 files changed, 28 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> index 99e6a8d5cb9e..55abfb74aab2 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> @@ -255,6 +255,14 @@
> status = "disabled";
> };
>
> + saradc: adc@8680 {
> + compatible = "amlogic,meson-saradc";
> + #io-channel-cells = <1>;
Personally I think it makes more sense to keep reg after compatible for
consistency (same in example) and any #... "output" properties last.
> + status = "disabled";
> + reg = <0x0 0x8680 0x0 0x34>;
> + interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
> + };
> +
> pwm_ef: pwm@86c0 {
> compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
> reg = <0x0 0x086c0 0x0 0x10>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> index 39a774ad83ce..04b3324bc132 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> @@ -490,6 +490,16 @@
> clocks = <&clkc CLKID_I2C>;
> };
>
> +&saradc {
> + compatible = "amlogic,meson-gxbb-saradc", "amlogic,meson-saradc";
> + clocks = <&xtal>,
> + <&clkc CLKID_SAR_ADC>,
> + <&clkc CLKID_SANA>,
> + <&clkc CLKID_SAR_ADC_CLK>,
> + <&clkc CLKID_SAR_ADC_SEL>;
> + clock-names = "clkin", "core", "sana", "adc_clk", "adc_sel";
> +};
> +
> &sd_emmc_a {
> clocks = <&clkc CLKID_SD_EMMC_A>,
> <&xtal>,
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> index bdf2305a2e25..7c72dbcef1ba 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> @@ -340,6 +340,16 @@
> clocks = <&clkc CLKID_I2C>;
> };
>
> +&saradc {
> + compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc";
> + clocks = <&xtal>,
> + <&clkc CLKID_SAR_ADC>,
> + <&clkc CLKID_SANA>,
> + <&clkc CLKID_SAR_ADC_CLK>,
> + <&clkc CLKID_SAR_ADC_SEL>;
> + clock-names = "clkin", "core", "sana", "adc_clk", "adc_sel";
> +};
> +
> &sd_emmc_a {
> clocks = <&clkc CLKID_SD_EMMC_A>,
> <&xtal>,
Anyway, saradc before sd_emmc_a looks fine,
Reviewed-by: Andreas Färber <afaerber@xxxxxxx>
Regards,
Andreas
--
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
