Linux Kernel I2C

• Thread Index

• Re: [PATCH] input: adxl34x: Add OF match support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH] input: adxl34x: Add OF match support
  • From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
• Re: [PATCHv2 2/8] dt-bindings: use isil prefix for Intersil in I2C trivial-devices.txt
  • From: arno@xxxxxxxxxxxx (Arnaud Ebalard)
• Re: [PATCH] i2c: sh_mobile: I2C_SH_MOBILE should depend on HAS_DMA
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: sh_mobile: rework deferred probing
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: sh_mobile: refactor DMA setup
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: i2c-mv64xxx: rework offload support to fix several problems
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: i2c-mv64xxx: use BIT() macro for register value definitions
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: sh_mobile: I2C_SH_MOBILE should depend on HAS_DMA
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: sh_mobile: I2C_SH_MOBILE should depend on HAS_DMA
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: sh_mobile: I2C_SH_MOBILE should depend on HAS_DMA
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: sh_mobile: I2C_SH_MOBILE should depend on HAS_DMA
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: sh_mobile: I2C_SH_MOBILE should depend on HAS_DMA
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCHv2 2/8] dt-bindings: use isil prefix for Intersil in I2C trivial-devices.txt
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCHv2 2/8] dt-bindings: use isil prefix for Intersil in I2C trivial-devices.txt
  • From: Arnaud Ebalard <arno@xxxxxxxxxxxx>
• [PATCHv2 0/8] from now on, use 'isil' as prefix for Intersil
  • From: Arnaud Ebalard <arno@xxxxxxxxxxxx>
• Re: [RFC 1/2] i2c: sh_mobile: refactor DMA setup
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] of: i2c: Add DT bindings for idle states to PCA954x mux driver
  • From: Alexander Sverdlin <alexander.sverdlin@xxxxxxx>
• Re: [PATCHv1 1/7] dt-bindings: use isil prefix for Intersil
  • From: arno@xxxxxxxxxxxx (Arnaud Ebalard)
• Re: [PATCH] of: i2c: Add DT bindings for idle states to PCA954x mux driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] of: i2c: Add DT bindings for idle states to PCA954x mux driver
  • From: Alexander Sverdlin <alexander.sverdlin@xxxxxxx>
• [PATCH 1/2] i2c: sh_mobile: refactor DMA setup
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 2/2] i2c: sh_mobile: rework deferred probing
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 0/2] i2c: sh_mobile: handle deferred probe properly when requesting DMA channels
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC 2/2] i2c: sh_mobile: rework deferred probing
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC 1/2] i2c: sh_mobile: refactor DMA setup
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] of: i2c: Add DT bindings for idle states to PCA954x mux driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] of: i2c: Add DT bindings for idle states to PCA954x mux driver
  • From: Alexander Sverdlin <alexander.sverdlin@xxxxxxx>
• Re: [PATCHv1 1/7] dt-bindings: use isil prefix for Intersil
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCHv1 1/7] dt-bindings: use isil prefix for Intersil
  • From: Arnaud Ebalard <arno@xxxxxxxxxxxx>
• Re: [PATCH v3 0/3] Add I2C support to Broadcom iProc
  • From: Ray Jui <rjui@xxxxxxxxxxxx>
• Re: [PATCH v3 0/3] Add I2C support to Broadcom iProc
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/5] i2c: sh_mobile: add DMA support
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 2/5] i2c: sh_mobile: add DMA support
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• [PATCH] i2c: sh_mobile: I2C_SH_MOBILE should depend on HAS_DMA
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] of: i2c: Add DT bindings for idle states to PCA954x mux driver
  • From: Michael Lawnick <ml.lawnick@xxxxxx>
• Re: [PATCH v5 1/3] mfd: add support for Cypress CYUSBS234 USB Serial Bridge controller
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 2/5] i2c: sh_mobile: add DMA support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/5] i2c: sh_mobile: add DMA support
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/5] i2c: sh_mobile: add DMA support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 2/5] i2c: sh_mobile: add DMA support
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 2/5] i2c: sh_mobile: add DMA support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] of: i2c: Add DT bindings for idle states to PCA954x mux driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/5] i2c: sh_mobile: add DMA support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 2/5] i2c: sh_mobile: add DMA support
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• [PATCH] of: i2c: Add DT bindings for idle states to PCA954x mux driver
  • From: Alexander Sverdlin <alexander.sverdlin@xxxxxxx>
• [PULL REQUEST] i2c for 3.19
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v5 2/3] i2c: add support for Cypress CYUSBS234 USB-I2C adapter
  • From: Varka Bhadram <varkabhadram@xxxxxxxxx>
• Re: [PATCH v5 3/3] gpio: add support for Cypress CYUSBS234 USB-GPIO adapter
  • From: Varka Bhadram <varkabhadram@xxxxxxxxx>
• [PATCH v4] i2c: Driver to expose PowerNV platform i2c busses
  • From: Neelesh Gupta <neelegup@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/3] i2c: add support for Cypress CYUSBS234 USB-I2C adapter
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v5 2/3] i2c: add support for Cypress CYUSBS234 USB-I2C adapter
  • From: Muthu Mani <muth@xxxxxxxxxxx>
• RE: [PATCH v4 3/3] gpio: add support for Cypress CYUSBS234 USB-GPIO adapter
  • From: Muthu Mani <muth@xxxxxxxxxxx>
• [PATCH v5 3/3] gpio: add support for Cypress CYUSBS234 USB-GPIO adapter
  • From: Muthu Mani <muth@xxxxxxxxxxx>
• [PATCH v5 1/3] mfd: add support for Cypress CYUSBS234 USB Serial Bridge controller
  • From: Muthu Mani <muth@xxxxxxxxxxx>
• RE: [PATCH v4 2/3] i2c: add support for Cypress CYUSBS234 USB-I2C adapter
  • From: Muthu Mani <muth@xxxxxxxxxxx>
• Re: [PATCH 2/5] i2c: sh_mobile: add DMA support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [v3] i2c: Driver to expose PowerNV platform i2c busses
  • From: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
• [PATCH v5 2/2] i2c: cadence: Check for errata condition involving master receive
  • From: Harini Katakam <harinik@xxxxxxxxxx>
• [PATCH v5 1/2] i2c: cadence: Handle > 252 byte transfers
  • From: Harini Katakam <harinik@xxxxxxxxxx>
• [PATCH v5 0/2] Cadence I2C driver fixes
  • From: Harini Katakam <harinik@xxxxxxxxxx>
• Re: [PATCH v3 0/2] ARM: mediatek: Add driver for Mediatek I2C controller
  • From: Yingjoe Chen <yingjoe.chen@xxxxxxxxxxxx>
• [PATCH v2] i2c: rk3x: Account for repeated start time requirement
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: Account for repeated start time requirement
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 2/5] i2c: sh_mobile: add DMA support
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/5] i2c: sh_mobile: add DMA support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/5] i2c: sh_mobile: add DMA support
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 0/3] i2c: slave support framework for Linux devices
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: sh_mobile: remove unneeded DMA mask
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v5] i2c: rk3x: fix bug that cause measured high_ns doesn't meet I2C specification
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH] i2c: rk3x: Account for repeated start time requirement
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v4 2/2] i2c: cadence: Check for errata condition involving master receive
  • From: Sören Brinkmann <soren.brinkmann@xxxxxxxxxx>
• [PATCH 2/2] i2c: i2c-mv64xxx: rework offload support to fix several problems
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] i2c: i2c-mv64xxx: use BIT() macro for register value definitions
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• [PATCH 0/2] i2c: i2c-mv64xxx: fix offload support
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c-qoriq: modified compatibility for correct prescaler
  • From: Valentin Longchamp <valentin.longchamp@xxxxxxxxxxx>
• [PATCH v5] i2c: rk3x: fix bug that cause measured high_ns doesn't meet I2C specification
  • From: Addy Ke <addy.ke@xxxxxxxxxxxxxx>
• Re: [PATCH 2/5] i2c: sh_mobile: add DMA support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v4] i2c: rk3x: fix bug that cause measured high_ns doesn't meet I2C specification
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 2/5] i2c: sh_mobile: add DMA support
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/5] i2c: sh_mobile: add DMA support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] i2c: cadence: Check for errata condition involving master receive
  • From: Harini Katakam <harinikatakamlinux@xxxxxxxxx>
• [PATCH] i2c: designware: use {readl|writel}_relaxed instead of readl/writel
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• [PATCH v4] i2c: rk3x: fix bug that cause measured high_ns doesn't meet I2C specification
  • From: Addy Ke <addy.ke@xxxxxxxxxxxxxx>
• Re: [PATCH 2/5] i2c: sh_mobile: add DMA support
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 0/4] ARM: shmobile: koelsch: Add DA9063 watchdog restart support
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [RFC 1/2] i2c: sh_mobile: refactor DMA setup
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] i2c: cadence: Check for errata condition involving master receive
  • From: Sören Brinkmann <soren.brinkmann@xxxxxxxxxx>
• Re: [PATCH 2/5] i2c: sh_mobile: add DMA support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC 0/2] i2c: sh_mobile: don't regress on deferred probing
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/5] i2c: sh_mobile: add DMA support
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [RFC 0/2] i2c: sh_mobile: don't regress on deferred probing
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [RFC 2/2] i2c: sh_mobile: rework deferred probing
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [RFC 2/2] i2c: sh_mobile: rework deferred probing
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [RFC 0/2] i2c: sh_mobile: don't regress on deferred probing
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [RFC 1/2] i2c: sh_mobile: refactor DMA setup
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH] i2c: sh_mobile: remove unneeded DMA mask
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v4 2/2] i2c: cadence: Check for errata condition involving master receive
  • From: Harini Katakam <harinik@xxxxxxxxxx>
• [PATCH v4 1/2] i2c: cadence: Handle > 252 byte transfers
  • From: Harini Katakam <harinik@xxxxxxxxxx>
• [PATCH v4 0/2] Cadence I2C driver fixes
  • From: Harini Katakam <harinik@xxxxxxxxxx>
• Re: [PATCH 0/4] ARM: shmobile: koelsch: Add DA9063 watchdog restart support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 2/5] i2c: sh_mobile: add DMA support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/5] i2c: sh_mobile: add DMA support
  • From: Magnus Damm <magnus.damm@xxxxxxxxx>
• Re: [PATCH v2 3/4] ARM: mach-bcm: Enable I2C support for iProc
  • From: Ray Jui <rjui@xxxxxxxxxxxx>
• [PATCH v3 1/3] i2c: iProc: define Broadcom iProc I2C binding
  • From: Ray Jui <rjui@xxxxxxxxxxxx>
• [PATCH v3 3/3] ARM: dts: add I2C device nodes for Broadcom Cygnus
  • From: Ray Jui <rjui@xxxxxxxxxxxx>
• [PATCH v3 2/3] i2c: iproc: Add Broadcom iProc I2C Driver
  • From: Ray Jui <rjui@xxxxxxxxxxxx>
• [PATCH v3 0/3] Add I2C support to Broadcom iProc
  • From: Ray Jui <rjui@xxxxxxxxxxxx>
• Re: [PATCH 2/4] i2c: iproc: Add Broadcom iProc I2C Driver
  • From: Ray Jui <rjui@xxxxxxxxxxxx>
• Re: [PATCH 1/4] i2c: iProc: define Broadcom iProc I2C binding
  • From: Ray Jui <rjui@xxxxxxxxxxxx>
• Re: [PATCH v2 3/4] ARM: mach-bcm: Enable I2C support for iProc
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v2 3/4] ARM: mach-bcm: Enable I2C support for iProc
  • From: Ray Jui <rjui@xxxxxxxxxxxx>
• Re: [PATCH v2 3/4] ARM: mach-bcm: Enable I2C support for iProc
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• [PATCH v2 1/4] i2c: iProc: define Broadcom iProc I2C binding
  • From: Ray Jui <rjui@xxxxxxxxxxxx>
• [PATCH v2 3/4] ARM: mach-bcm: Enable I2C support for iProc
  • From: Ray Jui <rjui@xxxxxxxxxxxx>
• [PATCH v2 4/4] ARM: dts: add I2C device nodes for Broadcom Cygnus
  • From: Ray Jui <rjui@xxxxxxxxxxxx>
• [PATCH v2 2/4] i2c: iproc: Add Broadcom iProc I2C Driver
  • From: Ray Jui <rjui@xxxxxxxxxxxx>
• [PATCH v2 0/4] Add I2C support to Broadcom iProc
  • From: Ray Jui <rjui@xxxxxxxxxxxx>
• Re: [PATCH 2/4] i2c: iproc: Add Broadcom iProc I2C Driver
  • From: Ray Jui <rjui@xxxxxxxxxxxx>
• Re: [PATCH 1/4] i2c: iProc: define Broadcom iProc I2C binding
  • From: Ray Jui <rjui@xxxxxxxxxxxx>
• Re: [PATCH 2/4] i2c: iproc: Add Broadcom iProc I2C Driver
  • From: Varka Bhadram <varkabhadram@xxxxxxxxx>
• Re: [PATCH 1/4] i2c: iProc: define Broadcom iProc I2C binding
  • From: Varka Bhadram <varkabhadram@xxxxxxxxx>
• [PATCH 1/4] i2c: iProc: define Broadcom iProc I2C binding
  • From: Ray Jui <rjui@xxxxxxxxxxxx>
• [PATCH 4/4] ARM: dts: add I2C device nodes for Broadcom Cygnus
  • From: Ray Jui <rjui@xxxxxxxxxxxx>
• [PATCH 2/4] i2c: iproc: Add Broadcom iProc I2C Driver
  • From: Ray Jui <rjui@xxxxxxxxxxxx>
• [PATCH 3/4] ARM: mach-bcm: Enable I2C support for iProc
  • From: Ray Jui <rjui@xxxxxxxxxxxx>
• [PATCH 0/4] Add I2C support to Broadcom iProc
  • From: Ray Jui <rjui@xxxxxxxxxxxx>
• Re: [PATCH 0/4] ARM: shmobile: koelsch: Add DA9063 watchdog restart support
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• [RFC] Documentation: i2c: add fault code for not supporting 10 bit addresses
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/4] watchdog: da9063: Add restart handler support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/5] i2c: sh_mobile: add DMA support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [v3] i2c: Driver to expose PowerNV platform i2c busses
  • From: Neelesh Gupta <neelegup@xxxxxxxxxxxxxxxxxx>
• RE: [PATCH 2/4] DT: i2c: Add devices handled by the da9063 MFD driver
  • From: "Opensource [Steve Twiss]" <stwiss.opensource@xxxxxxxxxxx>
• RE: [PATCH 1/4] watchdog: da9063: Add restart handler support
  • From: "Opensource [Steve Twiss]" <stwiss.opensource@xxxxxxxxxxx>
• [PATCH 1/4] watchdog: da9063: Add restart handler support
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 0/4] ARM: shmobile: koelsch: Add DA9063 watchdog restart support
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 3/4] ARM: shmobile: koelsch: Add DA9063 PMIC device node for system restart
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 4/4] ARM: shmobile: Enable DA9063 watchdog in multiplatform defconfig
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 2/4] DT: i2c: Add devices handled by the da9063 MFD driver
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH 2/5] i2c: sh_mobile: add DMA support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [v3] i2c: Driver to expose PowerNV platform i2c busses
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: [v3] i2c: Driver to expose PowerNV platform i2c busses
  • From: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: Driver to expose PowerNV platform i2c busses
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: Driver to expose PowerNV platform i2c busses
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: Driver to expose PowerNV platform i2c busses
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: Driver to expose PowerNV platform i2c busses
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: Driver to expose PowerNV platform i2c busses
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: rk3x: fix bug that cause measured high_ns doesn't meet I2C spec
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: rk3x: fix bug that cause measured high_ns doesn't meet I2C spec
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v3] i2c: rk3x: fix bug that cause measured high_ns doesn't meet I2C spec
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: rk3x: fix bug that cause measured high_ns doesn't meet I2C spec
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v4 1/3] mfd: add support for Cypress CYUSBS234 USB Serial Bridge controller
  • From: Johan Hovold <johan@xxxxxxxxxx>
• RE: [PATCH v4 1/3] mfd: add support for Cypress CYUSBS234 USB Serial Bridge controller
  • From: Muthu Mani <muth@xxxxxxxxxxx>
• Re: [PATCH v4 1/3] mfd: add support for Cypress CYUSBS234 USB Serial Bridge controller
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH] MAINTAINERS: add I2C dt bindings also to I2C realm
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: rk3x: fix bug that cause measured high_ns doesn't meet I2C spec
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v3] i2c: Driver to expose PowerNV platform i2c busses
  • From: Neelesh Gupta <neelegup@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: rk3x: fix bug that cause measured high_ns doesn't meet I2C spec
  • From: addy ke <addy.ke@xxxxxxxxxxxxxx>
• [PATCH v3] i2c: rk3x: fix bug that cause measured high_ns doesn't meet I2C spec
  • From: Addy Ke <addy.ke@xxxxxxxxxxxxxx>
• Re: [PATCH v3] iio: imu: inv_mpu6050: Add i2c mux for by pass
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• RE: [PATCH v4 1/3] mfd: add support for Cypress CYUSBS234 USB Serial Bridge controller
  • From: Muthu Mani <muth@xxxxxxxxxxx>
• [PULL REQUEST] i2c for 3.18
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH V3 0/2] i2c-designware: Baytrail bus locking driver
  • From: Shinya Kuribayashi <skuribay@xxxxxxxxx>
• [PATCH v3] iio: imu: inv_mpu6050: Add i2c mux for by pass
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH v3] iio: imu: inv_mpu6050: Add i2c mux for by pass
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: rk3x: fix bug that cause measured high_ns doesn't meet I2C spec
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v2] iio: imu: inv_mpu6050: Add i2c mux for by pass
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: cadence: Check for errata condition involving master receive
  • From: Sören Brinkmann <soren.brinkmann@xxxxxxxxxx>
• Re: [RFC 1/2] i2c: omap: fix buffer overruns during RX/TX data processing
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: [PATCH v2] iio: imu: inv_mpu6050: Add i2c mux for by pass
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: cadence: Check for errata condition involving master receive
  • From: rajeev kumar <rajeevkumar.linux@xxxxxxxxx>
• Re: [PATCH v2 1/3] i2c: cadence: Handle > 252 byte transfers
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• [PATCH v3 2/2] i2c: cadence: Check for errata condition involving master receive
  • From: Harini Katakam <harinik@xxxxxxxxxx>
• [PATCH v3 1/2] i2c: cadence: Handle > 252 byte transfers
  • From: Harini Katakam <harinik@xxxxxxxxxx>
• [PATCH v3 0/2] Cadence I2C driver fixes
  • From: Harini Katakam <harinik@xxxxxxxxxx>
• Re: [PATCH v2] iio: imu: inv_mpu6050: Add i2c mux for by pass
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] i2c: cadence: Handle > 252 byte transfers
  • From: Harini Katakam <harinikatakamlinux@xxxxxxxxx>
• Re: [PATCH v2 1/3] i2c: cadence: Handle > 252 byte transfers
  • From: rajeev kumar <rajeevkumar.linux@xxxxxxxxx>
• Re: [PATCH v2 1/3] i2c: cadence: Handle > 252 byte transfers
  • From: Harini Katakam <harinikatakamlinux@xxxxxxxxx>
• Re: [PATCH v2 3/3] i2c: cadence: Check for errata condition involving master receive
  • From: Harini Katakam <harinikatakamlinux@xxxxxxxxx>
• [PATCH v2] iio: imu: inv_mpu6050: Add i2c mux for by pass
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH v2] iio: imu: inv_mpu6050: Add i2c mux for by pass
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH V3 2/2] i2c-designware: Add Intel Baytrail PMIC I2C bus support
  • From: "David E. Box" <david.e.box@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: rk3x: fix bug that cause measured high_ns doesn't meet I2C spec
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH V3 1/2] i2c-designware: Add i2c bus locking support
  • From: "David E. Box" <david.e.box@xxxxxxxxxxxxxxx>
• Re: [PATCH V3 1/2] i2c-designware: Add i2c bus locking support
  • From: "David E. Box" <david.e.box@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: rk3x: fix bug that cause measured high_ns doesn't meet I2C spec
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v2] i2c: rk3x: fix bug that cause measured high_ns doesn't meet I2C spec
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] i2c: cadence: Check for errata condition involving master receive
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] i2c: cadence: Handle > 252 byte transfers
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] i2c: cadence: Set the hardware time-out register to maximum value
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 3/5] i2c: recovery: change input parameter to i2c_adapter for prepare/unprepare_recovery
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/5] i2c: davinci: generate STP always when NACK is received
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/5] i2c: i2c-davinci: switch to use platform_get_irq
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC 0/5] i2c: omap: new fixes 2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: Remove support for legacy PM
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: Remove support for legacy PM
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [RFC 1/2] i2c: omap: fix buffer overruns during RX/TX data processing
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: Remove support for legacy PM
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] Documentation: i2c: Use PM ops instead of legacy suspend/resume
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: sh_mobile: optimize irq entry
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: sh_mobile: optimize irq entry
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] i2c: sh_mobile: optimize irq entry
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH V3 1/2] i2c-designware: Add i2c bus locking support
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] Documentation: i2c: Use PM ops instead of legacy suspend/resume
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] Documentation: i2c: Use PM ops instead of legacy suspend/resume
  • From: Jonathan Corbet <corbet@xxxxxxx>
• [PULL REQUEST] i2c for 3.18
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH V3 2/2] i2c-designware: Add Intel Baytrail PMIC I2C bus support
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: Question about patch "i2c: omap: resize fifos before each message"
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: Question about patch "i2c: omap: resize fifos before each message"
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Question about patch "i2c: omap: resize fifos before each message"
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: [PATCH V3 1/2] i2c-designware: Add i2c bus locking support
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: rk3x: fix bug that cause measured high_ns doesn't meet I2C spec
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: Question about patch "i2c: omap: resize fifos before each message"
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Question about patch "i2c: omap: resize fifos before each message"
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: Question about patch "i2c: omap: resize fifos before each message"
  • From: Felipe Balbi <balbi@xxxxxx>
• Question about patch "i2c: omap: resize fifos before each message"
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: [RFC 5/5] i2c: omap: add trace
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC 5/5] i2c: omap: add trace
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: [RFC 5/5] i2c: omap: add trace
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFC 1/5] i2c: omap: ack only reported events
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• [RFC 2/5] i2c: omap: simplify i462 errata handling for NACK and AL cases
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• [RFC 4/5] i2c: omap: reimpelement STP hack via 2-phases transfer
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• [RFC 5/5] i2c: omap: add trace
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• [RFC 3/5] i2c: omap: move STP generation logic into ISR thread
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• [RFC 0/5] i2c: omap: new fixes 2
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• [PATCH v2 2/3] i2c: cadence: Set the hardware time-out register to maximum value
  • From: Harini Katakam <harinik@xxxxxxxxxx>
• [PATCH v2 3/3] i2c: cadence: Check for errata condition involving master receive
  • From: Harini Katakam <harinik@xxxxxxxxxx>
• [PATCH v2 1/3] i2c: cadence: Handle > 252 byte transfers
  • From: Harini Katakam <harinik@xxxxxxxxxx>
• [PATCH v2 0/3] Cadence I2C driver fixes
  • From: Harini Katakam <harinik@xxxxxxxxxx>
• Re: [PATCH 2/4] i2c: cadence: Set the hardware time-out register to maximum value
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c-omap / PM: Drop CONFIG_PM_RUNTIME from i2c-omap.c
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: rk3x: fix bug that cause measured high_ns doesn't meet I2C spec
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v4 2/3] i2c: add support for Cypress CYUSBS234 USB-I2C adapter
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: rk3x: fix bug that cause measured high_ns doesn't meet I2C spec
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v2] i2c: rk3x: fix bug that cause measured high_ns doesn't meet I2C spec
  • From: Addy Ke <addy.ke@xxxxxxxxxxxxxx>
• [PATCH] i2c-omap / PM: Drop CONFIG_PM_RUNTIME from i2c-omap.c
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: fix bug that cause measured high_ns doesn't meet I2C spec
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 3/4] devicetree: bindings: Add defeature-repeated-start property for Cadence I2C
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 3/4] devicetree: bindings: Add defeature-repeated-start property for Cadence I2C
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 3/4] devicetree: bindings: Add defeature-repeated-start property for Cadence I2C
  • From: Harini Katakam <harinikatakamlinux@xxxxxxxxx>
• Re: [PATCH 1/3] staging: imx-drm: document internal HDMI I2C master controller DT binding
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 3/4] devicetree: bindings: Add defeature-repeated-start property for Cadence I2C
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] staging: imx-drm: document internal HDMI I2C master controller DT binding
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• Re: [PATCH 3/4] devicetree: bindings: Add defeature-repeated-start property for Cadence I2C
  • From: Harini Katakam <harinikatakamlinux@xxxxxxxxx>
• Re: [PATCH] i2c: Add parameters to sysfs-added i2c devices
  • From: Corey Minyard <cminyard@xxxxxxxxxx>
• Re: [PATCH 3/4] devicetree: bindings: Add defeature-repeated-start property for Cadence I2C
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 3/4] devicetree: bindings: Add defeature-repeated-start property for Cadence I2C
  • From: Harini Katakam <harinikatakamlinux@xxxxxxxxx>
• Re: [PATCH 4/4] i2c: cadence: Defeature repeated start based on devicetree property
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [RFC 0/2] i2c: omap: new fixes for driver
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: [PATCH 3/4] devicetree: bindings: Add defeature-repeated-start property for Cadence I2C
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [RFC 1/2] i2c: omap: fix buffer overruns during RX/TX data processing
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• [PATCH 1/4] i2c: cadence: Handle > 252 byte transfers
  • From: Harini Katakam <harinik@xxxxxxxxxx>
• [PATCH 4/4] i2c: cadence: Defeature repeated start based on devicetree property
  • From: Harini Katakam <harinik@xxxxxxxxxx>
• [PATCH 3/4] devicetree: bindings: Add defeature-repeated-start property for Cadence I2C
  • From: Harini Katakam <harinik@xxxxxxxxxx>
• [PATCH 2/4] i2c: cadence: Set the hardware time-out register to maximum value
  • From: Harini Katakam <harinik@xxxxxxxxxx>
• [PATCH 0/4] Cadence I2C driver fixes
  • From: Harini Katakam <harinik@xxxxxxxxxx>
• Re: [PATCH v4 3/3] gpio: add support for Cypress CYUSBS234 USB-GPIO adapter
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/3] staging: imx-drm: document internal HDMI I2C master controller DT binding
  • From: Andy Yan <andy.yan@xxxxxxxxxxxxxx>
• [PATCH V3 1/2] i2c-designware: Add i2c bus locking support
  • From: "David E. Box" <david.e.box@xxxxxxxxxxxxxxx>
• [PATCH V3 2/2] i2c-designware: Add Intel Baytrail PMIC I2C bus support
  • From: "David E. Box" <david.e.box@xxxxxxxxxxxxxxx>
• [PATCH V3 0/2] i2c-designware: Baytrail bus locking driver
  • From: "David E. Box" <david.e.box@xxxxxxxxxxxxxxx>
• Re: [RFC 0/2] i2c: omap: new fixes for driver
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [RFC 1/2] i2c: omap: fix buffer overruns during RX/TX data processing
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] i2c: Add parameters to sysfs-added i2c devices
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: mux: pca9541: add return value check on register writes
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: mux: create "channel-n" symlinks for child segments in the mux device
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c-qoriq: modified compatibility for correct prescaler
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: mpc: add register documentation to Freescale I2C driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: Driver to expose PowerNV platform i2c busses
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] staging: imx-drm: document internal HDMI I2C master controller DT binding
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] staging: imx-drm: document internal HDMI I2C master controller DT binding
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• [PATCH v3 2/5] i2c: davinci: generate STP always when NACK is received
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v3 0/5] i2c: davinci improvements and fixes
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v3 3/5] i2c: recovery: change input parameter to i2c_adapter for prepare/unprepare_recovery
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v3 4/5] i2c: davinci: use bus recovery infrastructure
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 5/5] i2c: davinci: use ICPFUNC to toggle I2C as gpio for bus recovery
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v3 1/5] i2c: i2c-davinci: switch to use platform_get_irq
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 1/3] staging: imx-drm: document internal HDMI I2C master controller DT binding
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] staging: imx-drm: document internal HDMI I2C master controller DT binding
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• Re: [PATCH v4 3/3] gpio: add support for Cypress CYUSBS234 USB-GPIO adapter
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v4 1/3] mfd: add support for Cypress CYUSBS234 USB Serial Bridge controller
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 2/2] i2c: Remove support for legacy PM
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH 1/2] Documentation: i2c: Use PM ops instead of legacy suspend/resume
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] i2c-qoriq: modified compatibility for correct prescaler
  • From: Danielle Costantino <danielle.costantino@xxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: mux: create "channel-n" symlinks for child segments in the mux device
  • From: Danielle Costantino <danielle.costantino@xxxxxxxxx>
• [PATCH] i2c: mux: pca9541: add return value check on register writes
  • From: Danielle Costantino <danielle.costantino@xxxxxxxxx>
• Re: [RFC] i2c: omap: TEST: do IP reset during probe.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] i2c: mpc: add register documentation to Freescale I2C driver
  • From: Danielle Costantino <danielle.costantino@xxxxxxxxx>
• [RFC 2/2] i2c: omap: show that the reason of system lockup is an unhandled ISR event
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• [RFC 1/2] i2c: omap: fix buffer overruns during RX/TX data processing
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• [RFC 0/2] i2c: omap: new fixes for driver
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• [PATCH v4 3/3] gpio: add support for Cypress CYUSBS234 USB-GPIO adapter
  • From: Muthu Mani <muth@xxxxxxxxxxx>
• [PATCH v4 2/3] i2c: add support for Cypress CYUSBS234 USB-I2C adapter
  • From: Muthu Mani <muth@xxxxxxxxxxx>
• [PATCH v4 1/3] mfd: add support for Cypress CYUSBS234 USB Serial Bridge controller
  • From: Muthu Mani <muth@xxxxxxxxxxx>
• Re: [RFC] i2c: omap: TEST: do IP reset during probe.
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: [RFC] i2c: omap: TEST: do IP reset during probe.
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: [RFC] i2c: omap: TEST: do IP reset during probe.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v4 2/3] i2c: add support for Cypress CYUSBS234 USB-I2C adapter
  • From: Muthu Mani <muth@xxxxxxxxxxx>
• [PATCH v4 1/3] mfd: add support for Cypress CYUSBS234 USB Serial Bridge controller
  • From: Muthu Mani <muth@xxxxxxxxxxx>
• [PATCH v4 3/3] gpio: add support for Cypress CYUSBS234 USB-GPIO adapter
  • From: Muthu Mani <muth@xxxxxxxxxxx>
• Re: How should dev_[gs]et_drvdata be used?
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: How should dev_[gs]et_drvdata be used?
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v3 0/2] ARM: mediatek: Add driver for Mediatek I2C controller
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: Freeze of mouse and keyboard after suspend due to i2c-designware
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: Freeze of mouse and keyboard after suspend due to i2c-designware
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: Freeze of mouse and keyboard after suspend due to i2c-designware
  • From: "Prof. H.-M. Hoogewoud" <hhoogewoud@xxxxxxxxxx>
• Re: Freeze of mouse and keyboard after suspend due to i2c-designware
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: Freeze of mouse and keyboard after suspend due to i2c-designware
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 0/2] ARM: mediatek: Add driver for Mediatek I2C controller
  • From: Yingjoe Chen <yingjoe.chen@xxxxxxxxxxxx>
• Re: Freeze of mouse and keyboard after suspend due to i2c-designware
  • From: "Prof. H.-M. Hoogewoud" <hhoogewoud@xxxxxxxxxx>
• Re: [PATCH v3 2/4] i2c: omap: implement workaround for handling invalid BB-bit values
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: [PATCH v2] omap: i2c: don't check bus state IP rev3.3 and earlier
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [RFC] i2c: omap: TEST: do IP reset during probe.
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH v2] omap: i2c: don't check bus state IP rev3.3 and earlier
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• [RFC] i2c: omap: TEST: do IP reset during probe.
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: [PATCH v2 2/5] i2c: davinci: query STP always when NACK is received
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v2 5/5] i2c: davinci: use ICPFUNC to toggle I2C as gpio for bus recovery
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v2 2/5] i2c: davinci: query STP always when NACK is received
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v2 1/5] i2c: i2c-davinci: switch to use platform_get_irq
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v2 5/5] i2c: davinci: use ICPFUNC to toggle I2C as gpio for bus recovery
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v2 4/5] i2c: davinci: use bus recovery infrastructure
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/5] i2c: davinci: query STP always when NACK is received
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/5] i2c: i2c-davinci: switch to use platform_get_irq
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 0/5] i2c: davinci improvements and fixes
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v2 2/5] i2c: davinci: query STP always when NACK is received
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v2 5/5] i2c: davinci: use ICPFUNC to toggle I2C as gpio for bus recovery
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v2 3/5] i2c: recovery: change input parameter to i2c_adapter for prepare/unprepare_recovery
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v2 4/5] i2c: davinci: use bus recovery infrastructure
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v2 1/5] i2c: i2c-davinci: switch to use platform_get_irq
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v8 3/8] OF: DT-Overlay configfs interface (v2)
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH 2/3] i2c: slave-eeprom: add eeprom simulator driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] i2c: slave-eeprom: add eeprom simulator driver
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: [PATCH 2/3] i2c: slave-eeprom: add eeprom simulator driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c-qoriq: modified compatibility for correct prescaler
  • From: Scott Wood <scottwood@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: core: Fix probing of i2c slaves without interrupts
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH V3] ACPI: Add _DEP(Operation Region Dependencies) support to fix battery issue on the Asus T100TA
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] i2c: slave-eeprom: add eeprom simulator driver
  • From: Stijn Devriendt <highguy@xxxxxxxxx>
• Re: How should dev_[gs]et_drvdata be used?
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: Driver to expose PowerNV platform i2c busses
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] omap: i2c: don't check bus state IP rev3.3 and earlier
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH v2] omap: i2c: don't check bus state IP rev3.3 and earlier
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH] i2c-qoriq: modified compatibility for correct prescaler
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: Driver to expose PowerNV platform i2c busses
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: Driver to expose PowerNV platform i2c busses
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] i2c: omap: implement workaround for handling invalid BB-bit values
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v8 3/8] OF: DT-Overlay configfs interface (v2)
  • From: Pantelis Antoniou <panto@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] omap: i2c: don't check bus state IP rev3.3 and earlier
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: [PATCH v3] i2c-pxa: add support for SCCB devices
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] omap: i2c: don't check bus state IP rev3.3 and earlier
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 12/14] i2c/of: Add OF_RECONFIG notifier handler
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 11/14] i2c/of: Factor out Devicetree registration code
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [5/5] i2c: davinci: use ICPFUNC to toggle I2C as gpio for bus recovery
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v8 3/8] OF: DT-Overlay configfs interface (v2)
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v3] i2c-pxa: add support for SCCB devices
  • From: Petr Cvek <petr.cvek@xxxxxx>
• Re: [PATCH v2] i2c: Driver to expose PowerNV platform i2c busses
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V3] ACPI: Add _DEP(Operation Region Dependencies) support to fix battery issue on the Asus T100TA
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH V3] ACPI: Add _DEP(Operation Region Dependencies) support to fix battery issue on the Asus T100TA
  • From: "Li, Aubrey" <aubrey.li@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] i2c: omap: implement workaround for handling invalid BB-bit values
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• [PATCH v2 12/14] i2c/of: Add OF_RECONFIG notifier handler
  • From: Grant Likely <grant.likely@xxxxxxxxxx>
• [PATCH v2 11/14] i2c/of: Factor out Devicetree registration code
  • From: Grant Likely <grant.likely@xxxxxxxxxx>
• [PATCH v2] omap: i2c: don't check bus state IP rev3.3 and earlier
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: [PATCH] omap: i2c: don't check bus state IP rev3.3 and earlier
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 2/4] i2c: omap: implement workaround for handling invalid BB-bit values
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: [PATCH 2/3] i2c: slave-eeprom: add eeprom simulator driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH] omap: i2c: don't check bus state IP rev3.3 and earlier
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: [4/5] i2c: davinci: use bus recovery infrastructure
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] i2c: omap: implement workaround for handling invalid BB-bit values
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: [2/5] i2c: davinci: query STP always when NACK is received
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] i2c: omap: implement workaround for handling invalid BB-bit values
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [5/5] i2c: davinci: use ICPFUNC to toggle I2C as gpio for bus recovery
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] i2c: omap: implement workaround for handling invalid BB-bit values
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: [PATCH v3 2/4] i2c: omap: implement workaround for handling invalid BB-bit values
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [5/5] i2c: davinci: use ICPFUNC to toggle I2C as gpio for bus recovery
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 0/3] i2c: i2c-imx-hdmi: add support of iMX6 HDMI DDC I2C bus
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• Re: [PATCH v3 2/4] i2c: omap: implement workaround for handling invalid BB-bit values
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] i2c: omap: implement workaround for handling invalid BB-bit values
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/4] i2c: omap: implement workaround for handling invalid BB-bit values
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 2/4] i2c: omap: implement workaround for handling invalid BB-bit values
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH 2/4] i2c: omap: implement workaround for handling invalid BB-bit values
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [5/5] i2c: davinci: use ICPFUNC to toggle I2C as gpio for bus recovery
  • From: Mike Looijmans <info@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] Add support for SCCB devices into PXA27x I2C controller
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH V3] ACPI: Add _DEP(Operation Region Dependencies) support to fix battery issue on the Asus T100TA
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: Add parameters to sysfs-added i2c devices
  • From: Corey Minyard <cminyard@xxxxxxxxxx>
• Re: [2/5] i2c: davinci: query STP always when NACK is received
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [4/5] i2c: davinci: use bus recovery infrastructure
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [5/5] i2c: davinci: use ICPFUNC to toggle I2C as gpio for bus recovery
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 0/3] i2c: i2c-imx-hdmi: add support of iMX6 HDMI DDC I2C bus
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: Driver to expose PowerNV platform i2c busses
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 0/2] ARM: mediatek: Add driver for Mediatek I2C controller
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: add Kconfig dependency on COMMON_CLK
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: add Kconfig dependency on COMMON_CLK
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: rk3x: add Kconfig dependency on COMMON_CLK
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: add Kconfig dependency on COMMON_CLK
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v3] i2c: rk3x: add Kconfig dependency on COMMON_CLK
  • From: Max Schwarz <max.schwarz@xxxxxxxxx>
• Re: [PATCH v2] i2c: rk3x: add Kconfig dependency on COMMON_CLK
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2] i2c: rk3x: add Kconfig dependency on COMMON_CLK
  • From: Max Schwarz <max.schwarz@xxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: Add I2C bindings for mt65xx/mt81xx.
  • From: Xudong Chen <xudong.chen@xxxxxxxxxxxx>
• [PATCH v3 0/2] ARM: mediatek: Add driver for Mediatek I2C controller
  • From: Xudong Chen <xudong.chen@xxxxxxxxxxxx>
• [PATCH v3 2/2] I2C: mediatek: Add driver for MediaTek I2C controller
  • From: Xudong Chen <xudong.chen@xxxxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: add Kconfig dependency on COMMON_CLK
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v6] i2c: s3c2410: Handle i2c sys_cfg register in i2c driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: add Kconfig dependency on COMMON_CLK
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v4 1/2] i2c: s3c2410: Handle i2c sys_cfg register in i2c driver
  • From: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx>
• [PATCH v6] i2c: s3c2410: Handle i2c sys_cfg register in i2c driver
  • From: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: add Kconfig dependency on COMMON_CLK
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH V3] ACPI: Add _DEP(Operation Region Dependencies) support to fix battery issue on the Asus T100TA
  • From: Michael Shigorin <mike@xxxxxxxxxxxx>
• Re: [PATCH V3] ACPI: Add _DEP(Operation Region Dependencies) support to fix battery issue on the Asus T100TA
  • From: Adam Williamson <awilliam@xxxxxxxxxx>
• Re: [PATCH V3] ACPI: Add _DEP(Operation Region Dependencies) support to fix battery issue on the Asus T100TA
  • From: "Li, Aubrey" <aubrey.li@xxxxxxxxxxxxxxx>
• [PATCH] i2c: rk3x: add Kconfig dependency on COMMON_CLK
  • From: Max Schwarz <max.schwarz@xxxxxxxxx>
• Re: [PATCH v2] Add support for SCCB devices into PXA27x I2C controller
  • From: Petr Cvek <petr.cvek@xxxxxx>
• Re: [4/5] i2c: davinci: use bus recovery infrastructure
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [2/5] i2c: davinci: query STP always when NACK is received
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] i2c: slave-eeprom: add eeprom simulator driver
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] i2c: slave-eeprom: add eeprom simulator driver
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [5/5] i2c: davinci: use ICPFUNC to toggle I2C as gpio for bus recovery
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] Add support for SCCB devices into PXA27x I2C controller
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 6/8] OF: i2c: Add OF notifier handler
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v8 5/8] of: i2c: Export single device registration method
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH V3] ACPI: Add _DEP(Operation Region Dependencies) support to fix battery issue on the Asus T100TA
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: [PATCH 2/4] i2c: omap: implement workaround for handling invalid BB-bit values
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: [PATCH] Add support for SCCB devices into PXA27x I2C controller
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/4] i2c: omap: implement workaround for handling invalid BB-bit values
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] Add support for SCCB devices into PXA27x I2C controller
  • From: Petr Cvek <petr.cvek@xxxxxx>
• Re: [PATCH] i2c: omap: fix i207 errata handling
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: omap: fix i207 errata handling
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 0/4] i2c: omap: patch series related to multimaster mode
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v1 1/2] iio: imu: inv_mpu6050: Add i2c mux for by pass
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH v3 1/4] i2c: omap: cleanup register definitions
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• [PATCH v3 4/4] i2c: omap: add notes related to i2c multimaster mode
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• [PATCH v3 2/4] i2c: omap: implement workaround for handling invalid BB-bit values
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• [PATCH v3 3/4] i2c: omap: don't reset controller if Arbitration Lost detected
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• [PATCH v3 0/4] i2c: omap: patch series related to multimaster mode
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: [PATCH 2/3] i2c: slave-eeprom: add eeprom simulator driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] i2c: slave-eeprom: add eeprom simulator driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] i2c: slave-eeprom: add eeprom simulator driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/4] i2c: omap: implement workaround for handling invalid BB-bit values
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/4] i2c: omap: implement workaround for handling invalid BB-bit values
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: [PATCH v7] i2c: rk3x: handle dynamic clock rate changes correctly
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/4] i2c: omap: implement workaround for handling invalid BB-bit values
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v1 1/2] iio: imu: inv_mpu6050: Add i2c mux for by pass
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v1 1/2] iio: imu: inv_mpu6050: Add i2c mux for by pass
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/4] i2c: omap: don't reset controller if Arbitration Lost detected
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH v4 1/2] i2c: s3c2410: Handle i2c sys_cfg register in i2c driver
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• RE: [PATCH v4 1/2] i2c: s3c2410: Handle i2c sys_cfg register in i2c driver
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• Re: [PATCH] i2c: omap: fix i207 errata handling
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: [PATCH] i2c: omap: fix i207 errata handling
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• [PATCH v2 3/4] i2c: omap: don't reset controller if Arbitration Lost detected
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: [4/5] i2c: davinci: use bus recovery infrastructure
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [4/5] i2c: davinci: use bus recovery infrastructure
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [3/5] i2c: recovery: change input parameter to i2c_adapter for prepare/unprepare_recovery
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v7] i2c: rk3x: handle dynamic clock rate changes correctly
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v7] i2c: rk3x: handle dynamic clock rate changes correctly
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 3/4] i2c: omap: don't reset controller if Arbitration Lost detected
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: at91: enable probe deferring on dma channel request
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: at91: remove legacy DMA support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] of: spi: Export single device registration method and accessors (v2)
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v4 1/2] i2c: s3c2410: Handle i2c sys_cfg register in i2c driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/4] i2c: omap: implement workaround for handling invalid BB-bit values
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/4] i2c: omap: don't reset controller if Arbitration Lost detected
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 4/4] i2c: omap: add notes related to i2c multimaster mode
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] i2c: omap: fix i207 errata handling
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/4] i2c: omap: cleanup register definitions
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] of: spi: Export single device registration method and accessors (v2)
  • From: Pantelis Antoniou <panto@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [2/5] i2c: davinci: query STP always when NACK is received
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH] of: spi: Export single device registration method and accessors (v2)
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v8 6/8] OF: i2c: Add OF notifier handler
  • From: Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx>
• Re: [PATCH v8 6/8] OF: i2c: Add OF notifier handler
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: at91: enable probe deferring on dma channel request
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [1/5] i2c: i2c-davinci: switch to use platform_get_irq
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 2/3] i2c: slave-eeprom: add eeprom simulator driver
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [1/5] i2c: i2c-davinci: switch to use platform_get_irq
  • From: Rob Herring <robherring2@xxxxxxxxx>
• [PATCH 2/2] i2c: at91: enable probe deferring on dma channel request
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
• [PATCH 1/2] i2c: at91: remove legacy DMA support
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
• Re: [2/5] i2c: davinci: query STP always when NACK is received
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [2/5] i2c: davinci: query STP always when NACK is received
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [1/5] i2c: i2c-davinci: switch to use platform_get_irq
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v5 1/2] i2c: s3c2410: Handle i2c sys_cfg register in i2c driver
  • From: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx>
• Re: [PATCH v4 1/2] i2c: s3c2410: Handle i2c sys_cfg register in i2c driver
  • From: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx>
• Re: [PATCH v4 1/2] i2c: s3c2410: Handle i2c sys_cfg register in i2c driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] i2c: slave-eeprom: add eeprom simulator driver
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: prevent early stop on TX FIFO empty
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: at91: introduce probe deferring
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: omap: fix NACK and Arbitration Lost irq handling
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] Fixes: 1d7afc9 i2c: omap: ack IRQ in parts
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v8 6/8] OF: i2c: Add OF notifier handler
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v8 6/8] OF: i2c: Add OF notifier handler
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v8 5/8] of: i2c: Export single device registration method
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH] i2c: omap: fix i207 errata handling
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• [PATCH] i2c: omap: fix i207 errata handling
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: [PATCH 2/3] i2c: slave-eeprom: add eeprom simulator driver
  • From: Stijn Devriendt <highguy@xxxxxxxxx>
• Re: [2/5] i2c: davinci: query STP always when NACK is received
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [1/5] i2c: i2c-davinci: switch to use platform_get_irq
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 2/4] i2c: omap: implement workaround for handling invalid BB-bit values
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• [PATCH 1/4] i2c: omap: cleanup register definitions
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• [PATCH 3/4] i2c: omap: don't reset controller if Arbitration Lost detected
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• [PATCH 4/4] i2c: omap: add notes related to i2c multimaster mode
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• [RFC 0/4] i2c: omap: patch series related to multimaster mode
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: [PATCH] i2c: omap: fix NACK and Arbitration Lost irq handling
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH V2] ACPI: Add _DEP(Operation Region Dependencies) support to fix battery issue on the Asus T100TA
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: [PATCH V2] ACPI: Add _DEP(Operation Region Dependencies) support to fix battery issue on the Asus T100TA
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: Driver to expose PowerNV platform i2c busses
  • From: Neelesh Gupta <neelegup@xxxxxxxxxxxxxxxxxx>
• [PATCH V2] ACPI: Add _DEP(Operation Region Dependencies) support to fix battery issue on the Asus T100TA
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: [PATCH] i2c: img-scb: Allow building for MIPS
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
• [PATCH 1/5] i2c: i2c-davinci: switch to use platform_get_irq
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 0/5] i2c: davinci improvements and fixes
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 3/5] i2c: recovery: change input parameter to i2c_adapter for prepare/unprepare_recovery
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 4/5] i2c: davinci: use bus recovery infrastructure
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 5/5] i2c: davinci: use ICPFUNC to toggle I2C as gpio for bus recovery
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 2/5] i2c: davinci: query STP always when NACK is received
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v7] i2c: rk3x: handle dynamic clock rate changes correctly
  • From: Max Schwarz <max.schwarz@xxxxxxxxx>
• Re: [PATCH v6] i2c: rk3x: handle dynamic clock rate changes correctly
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] ACPI: Add _DEP(Operation Region Dependencies) support to fix battery issue on the Asus T100TA
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: [PATCH] ACPI: Add _DEP(Operation Region Dependencies) support to fix battery issue on the Asus T100TA
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [GIT PULL] Immutable branch between MFD, GPIO and I2C (Second batch)
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] ACPI: Add _DEP(Operation Region Dependencies) support to fix battery issue on the Asus T100TA
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] ACPI: Add _DEP(Operation Region Dependencies) support to fix battery issue on the Asus T100TA
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH] ACPI: Add _DEP(Operation Region Dependencies) support to fix battery issue on the Asus T100TA
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: [PATCH] dt: Update I2C trivial devices list
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] DT: i2c: Add more devices handled by the adxl34x-i2c driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] DT: i2c: Add more devices handled by the rtc-rs5c372 driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: prevent early stop on TX FIFO empty
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: prevent early stop on TX FIFO empty
  • From: Baruch Siach <baruch@xxxxxxxxxx>
• Re: [PATCH] i2c: sh_mobile: use proper device for mapping DMA memory
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] i2c: sh_mobile: use proper device for mapping DMA memory
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: imx: simplify i2c_imx_dma_write() a little
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• RE: [PATCH] i2c: imx: simplify i2c_imx_dma_write() a little
  • From: Yao Yuan <yao.yuan@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: at91: introduce probe deferring
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
• Re: [PATCH] i2c: at91: introduce probe deferring
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
• Re: [PATCH] i2c: at91: introduce probe deferring
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] i2c: designware: prevent early stop on TX FIFO empty
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: at91: introduce probe deferring
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH] i2c: imx: simplify i2c_imx_dma_write() a little
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: img-scb: Allow building for MIPS
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH] i2c: img-scb: Allow building for MIPS
  • From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
• Re: [PATCH] i2c: img-scb: Allow building for MIPS
  • From: James Hogan <james.hogan@xxxxxxxxxx>
• [PATCH v6] i2c: rk3x: handle dynamic clock rate changes correctly
  • From: Max Schwarz <max.schwarz@xxxxxxxxx>
• Re: [PATCH v3 3/3] ARM: dts: meson: add I2C controller nodes
  • From: Beniamino Galvani <b.galvani@xxxxxxxxx>
• [PATCH] i2c: omap: fix NACK and Arbitration Lost irq handling
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: [PATCH] Fixes: 1d7afc9 i2c: omap: ack IRQ in parts
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 3/3] i2c: rcar: add slave support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 2/3] i2c: slave-eeprom: add eeprom simulator driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 0/3] i2c: slave support framework for Linux devices
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 1/3] i2c: core changes for slave support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 3/3] ARM: dts: meson: add I2C controller nodes
  • From: Carlo Caione <carlo@xxxxxxxxxx>
• Re: [PATCH v3 3/3] ARM: dts: meson: add I2C controller nodes
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] i2c: meson: add device tree bindings documentation
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] i2c: add support for Amlogic Meson I2C controller
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: mux: create "channel-n" symlinks for child segments in the mux device
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] i2c: mux: create symlink to actual mux device
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: acpi: remove unneeded variable initialization
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v11 0/3] i2c: imx: add DMA support for freescale i2c driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: acpi: remove unneeded variable initialization
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH] i2c: acpi: remove unneeded variable initialization
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH V2 4/5] mfd: t7l66xb: prepare/unprepare clocks
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v2 1/4] mfd: dln2: fix _dln2_transfer return code
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• [PATCH v2 2/4] i2c: dln2: simplify return flow for dln2_i2c_enable
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• [PATCH v2 3/4] mfd: dln2: add a limit check for invalid echo
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• [PATCH v2 4/4] mfd: dln2: a couple endian fixes
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• [PATCH v2 0/4] dln2 fixes for ib-mfd-gpio-i2c-3.19
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• Re: [PATCH V2 5/5] mfd: tc6387xb: prepare/unprepare clocks
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v11 1/3] i2c: imx: Sort include headers alphabetically
  • From: Yuan Yao <yao.yuan@xxxxxxxxxxxxx>
• [PATCH v11 2/3] Documentation:add DMA support for freescale i2c driver
  • From: Yuan Yao <yao.yuan@xxxxxxxxxxxxx>
• [PATCH v11 0/3] i2c: imx: add DMA support for freescale i2c driver
  • From: Yuan Yao <yao.yuan@xxxxxxxxxxxxx>
• [PATCH v11 3/3] i2c: imx: add DMA support for freescale i2c driver
  • From: Yuan Yao <yao.yuan@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/3] ARM: mediatek: Add driver for Mediatek I2C controller
  • From: xudong chen <xudong.chen@xxxxxxxxxxxx>
• RE: [PATCH v10 3/3] i2c: imx: add DMA support for freescale i2c driver
  • From: Yao Yuan <yao.yuan@xxxxxxxxxxxxx>
• Re: [PATCH] i2c-qoriq: modified compatibility for correct prescaler
  • From: Scott Wood <scottwood@xxxxxxxxxxxxx>
• Re: [PATCH 4/6] i2c: busses: add SLIMpro I2C device driver on APM X-Gene platform
  • From: Feng Kan <fkan@xxxxxxx>
• Re: [PATCH v8 1/8] OF: Introduce DT overlay support. (v2)
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH V2 3/5] usb: gadget: pxa25x_udc: prepare/unprepare clocks in pxa-ssp
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH V2 2/5] i2c: pxa: prepare/unprepare clocks
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v10 3/3] i2c: imx: add DMA support for freescale i2c driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: core: Fix probing of i2c slaves without interrupts
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] Fixes: 1d7afc9 i2c: omap: ack IRQ in parts
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: [PATCH] i2c: core: Fix probing of i2c slaves without interrupts
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH] Fixes: 1d7afc9 i2c: omap: ack IRQ in parts
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• [PATCH] Fixes: 1d7afc9 i2c: omap: ack IRQ in parts
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: [PATCH V2 1/5] serial: pxa: prepare/unprepare clocks
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH V2 2/5] i2c: pxa: prepare/unprepare clocks
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: dln2: simplify return flow for dln2_i2c_enable
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• [PATCH V2 5/5] mfd: tc6387xb: prepare/unprepare clocks
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH V2 4/5] mfd: t7l66xb: prepare/unprepare clocks
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH V2 3/5] usb: gadget: pxa25x_udc: prepare/unprepare clocks in pxa-ssp
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH V2 2/5] i2c: pxa: prepare/unprepare clocks
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH V2 1/5] serial: pxa: prepare/unprepare clocks
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• Re: [PATCH 2/2] i2c: dln2: simplify return flow for dln2_i2c_enable
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: i2c: omap: fix NACK and Arbitration Lost irq handling
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v8 1/8] OF: Introduce DT overlay support. (v2)
  • From: Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx>
• [PATCH] i2c: core: Fix probing of i2c slaves without interrupts
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH 3/3] i2c: core: Map OF IRQ at probe time
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v10 0/3] i2c: imx: add DMA support for freescale i2c driver
  • From: Yuan Yao <yao.yuan@xxxxxxxxxxxxx>
• [PATCH v10 2/3] Documentation:add DMA support for freescale i2c driver
  • From: Yuan Yao <yao.yuan@xxxxxxxxxxxxx>
• [PATCH v10 1/3] i2c: imx: Sort include headers alphabetically
  • From: Yuan Yao <yao.yuan@xxxxxxxxxxxxx>
• [PATCH v10 3/3] i2c: imx: add DMA support for freescale i2c driver
  • From: Yuan Yao <yao.yuan@xxxxxxxxxxxxx>
• RE: [PATCH v9 3/3] i2c: imx: add DMA support for freescale i2c driver
  • From: Yao Yuan <yao.yuan@xxxxxxxxxxxxx>
• Re: [PATCH] at24: extend driver to allow writing via i2c_smbus_write_byte_data
  • From: Christian Gmeiner <christian.gmeiner@xxxxxxxxx>
• [PATCH v2] i2c: Driver to expose PowerNV platform i2c busses
  • From: Neelesh Gupta <neelegup@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] i2c: pxa: prepare/unprepare clocks
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH 1/3] staging: imx-drm: document internal HDMI I2C master controller DT binding
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• [PATCH 3/3] i2c: i2c-imx-hdmi: add documentation file of the bus
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• [PATCH 2/3] i2c: i2c-imx-hdmi: add support of iMX6 HDMI DDC I2C master bus
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/2] i2c: omap: fix NACK and Arbitration Lost irq handling
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/2] i2c: omap: fix NACK and Arbitration Lost irq handling
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• [PATCH 1/2] i2c: omap: fix NACK and Arbitration Lost irq handling
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• i2c: omap: fix "Too much work in one IRQ" irq handling
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• i2c: omap: fix NACK and Arbitration Lost irq handling
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: How to probe for pca954x multiplexers on a i2c-ocores bus?
  • From: Martin Belanger <martin.belanger@xxxxxxxxxxx>
• How to probe for pca954x multiplexers on a i2c-ocores bus?
  • From: Martin Belanger <martin.belanger@xxxxxxxxxxx>
• [PATCH 2/2] DT: i2c: Add more devices handled by the adxl34x-i2c driver
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 1/2] DT: i2c: Add more devices handled by the rtc-rs5c372 driver
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH v8 4/8] OF: platform: Add OF notifier handler
  • From: Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx>
• [PATCH] i2c: Add parameters to sysfs-added i2c devices
  • From: minyard@xxxxxxx
• [PATCH] i2c: at91: introduce probe deferring
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
• Re: [PATCH v3 1/2] i2c: mux: create symlink to actual mux device
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [GIT PULL] Immutable branch between MFD, GPIO and I2C
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3 1/2] i2c: mux: create symlink to actual mux device
  • From: Jeroen De Wachter <jeroen.de.wachter@xxxxxxxxxx>
• Re: [PATCH] i2c-qoriq: modified compatibility for correct prescaler
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/3] ARM: mediatek: Add driver for Mediatek I2C controller
  • From: Yingjoe Chen <yingjoe.chen@xxxxxxxxxxxx>
• Re: [PATCH] i2c-qoriq: modified compatibility for correct prescaler
  • From: Valentin Longchamp <valentin.longchamp@xxxxxxxxxxx>
• Re: [PATCH] i2c: Driver to expose PowerNV platform i2c busses
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] i2c: mux: create symlink to actual mux device
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: Add I2C bindings for mt65xx/mt81xx.
  • From: xudong chen <xudong.chen@xxxxxxxxxxxx>
• Re: [PATCH v2 0/3] ARM: mediatek: Add driver for Mediatek I2C controller
  • From: xudong chen <xudong.chen@xxxxxxxxxxxx>
• Re: [PATCH v7 1/2] i2c: Add Imagination Technologies I2C SCB driver
  • From: James Hogan <james.hogan@xxxxxxxxxx>
• Re: [PATCH v8 1/8] OF: Introduce DT overlay support. (v2)
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v8 4/8] OF: platform: Add OF notifier handler
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH] i2c: Driver to expose PowerNV platform i2c busses
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 1/3] i2c: meson: add device tree bindings documentation
  • From: Beniamino Galvani <b.galvani@xxxxxxxxx>
• [PATCH v3 2/3] i2c: add support for Amlogic Meson I2C controller
  • From: Beniamino Galvani <b.galvani@xxxxxxxxx>
• [PATCH v3 3/3] ARM: dts: meson: add I2C controller nodes
  • From: Beniamino Galvani <b.galvani@xxxxxxxxx>
• [PATCH v3 0/3] i2c: add driver for Amlogic Meson I2C controller
  • From: Beniamino Galvani <b.galvani@xxxxxxxxx>
• Re: [PATCH v6 2/2] DT: i2c: Add binding document for IMG I2C SCB
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v7 1/2] i2c: Add Imagination Technologies I2C SCB driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v7 1/2] i2c: Add Imagination Technologies I2C SCB driver
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
• Re: [PATCH v2 0/3] ARM: mediatek: Add driver for Mediatek I2C controller
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: Add I2C bindings for mt65xx/mt81xx.
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: Driver to expose PowerNV platform i2c busses
  • From: Neelesh Gupta <neelegup@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 1/2] i2c: Add Imagination Technologies I2C SCB driver
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
• Re: [PATCH v6 1/2] i2c: Add Imagination Technologies I2C SCB driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] at24: extend driver to allow writing via i2c_smbus_write_byte_data
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v6 1/2] i2c: Add Imagination Technologies I2C SCB driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: dln2: simplify return flow for dln2_i2c_enable
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: mux: create "channel-n" symlinks for child segments
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v3 1/2] i2c: mux: create symlink to actual mux device
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v3 2/2] i2c: mux: create "channel-n" symlinks for child segments in the mux device
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v6 2/2] DT: i2c: Add binding document for IMG I2C SCB
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
• [PATCH v6 1/2] i2c: Add Imagination Technologies I2C SCB driver
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
• [PATCH v6 0/2] i2c: Imagination Technologies I2C adapter driver
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
• Re: [PATCH] i2c: Driver to expose PowerNV platform i2c busses
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: Driver to expose PowerNV platform i2c busses
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: Driver to expose PowerNV platform i2c busses
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>