Re: [5/5] i2c: davinci: use ICPFUNC to toggle I2C as gpio for bus recovery

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Uwe,
On 11/23/2014 07:04 PM, Uwe Kleine-König wrote:
> On Thu, Nov 20, 2014 at 12:03:08PM +0200, Grygorii Strashko wrote:
>> @@ -664,6 +759,7 @@ static int davinci_i2c_probe(struct platform_device *pdev)
>>   		if (!of_property_read_u32(pdev->dev.of_node, "clock-frequency",
>>   			&prop))
>>   			dev->pdata->bus_freq = prop / 1000;
>> +		dev->pdata->has_pfunc = true;
> I don't understand this. Why does this ICPFUNC recovery work if the bus
> is probed by oftree, but doesn't if not?

I've mentioned this in commit message:
 Allow platforms to indicate the presence of the ICPFUNC registers with a has_pfunc
 platform data flag and enable this mode for platforms which supports DT (da850 and
 Keystone 2 are two SoCs which support DT now and they also support ICPFUNC registers).

I'll add proper comment here.

> 
>>   	} else if (!dev->pdata) {
>>   		dev->pdata = &davinci_i2c_platform_data_default;
>>   	}
>> @@ -705,7 +801,9 @@ static int davinci_i2c_probe(struct platform_device *pdev)
>>   	adap->timeout = DAVINCI_I2C_TIMEOUT;
>>   	adap->dev.of_node = pdev->dev.of_node;
>>   
>> -	if (dev->pdata->scl_pin) {
>> +	if (dev->pdata->has_pfunc)
>> +		adap->bus_recovery_info = &davinci_i2c_scl_recovery_info;
>> +	else if (dev->pdata->scl_pin) {
>>   		adap->bus_recovery_info = &davinci_i2c_gpio_recovery_info;
>>   		adap->bus_recovery_info->scl_gpio = dev->pdata->scl_pin;
>>   		adap->bus_recovery_info->sda_gpio = dev->pdata->sda_pin;
>> diff --git a/include/linux/platform_data/i2c-davinci.h b/include/linux/platform_data/i2c-davinci.h
>> index 2312d19..89fd347 100644
>> --- a/include/linux/platform_data/i2c-davinci.h
>> +++ b/include/linux/platform_data/i2c-davinci.h
>> @@ -18,6 +18,7 @@ struct davinci_i2c_platform_data {
>>   	unsigned int	bus_delay;	/* post-transaction delay (usec) */
>>   	unsigned int    sda_pin;        /* GPIO pin ID to use for SDA */
>>   	unsigned int    scl_pin;        /* GPIO pin ID to use for SCL */
>> +	bool		has_pfunc;	/*chip has a ICPFUNC register */
> Space after /* please
> 

regards,
-grygorii

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux