RE: [PATCH v4 1/3] mfd: add support for Cypress CYUSBS234 USB Serial Bridge controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thanks for your inputs.

> > +/* Serial interfaces (I2C, SPI, UART) differ in interface subclass */
> > +enum cy_scb_modes {
> > +       CY_USBS_SCB_DISABLED = 0,
> > +       CY_USBS_SCB_UART = 1,
> > +       CY_USBS_SCB_SPI = 2,
> > +       CY_USBS_SCB_I2C = 3
>
> Why have you numbered these individually?

I have changed them as #define's now. These values are not arbitrary.

> > +       /* Serial interfaces (I2C, SPI, UART) differ in interface subclass */
> > +       switch (interface->cur_altsetting->desc.bInterfaceSubClass) {
> > +       case CY_USBS_SCB_I2C:
> > +               dev_info(&interface->dev, "using I2C interface\n");
> > +               cyusbs23x_devs = cyusbs23x_i2c_gpio_devs;
> > +               ndevs = ARRAY_SIZE(cyusbs23x_i2c_gpio_devs);
>
> Not sure I get this.  Why do you have local variables for these instead of using
> them directly?

We are planning to support other protocols in future. To facilitate that, local variables are used.

> > +       return 0;
> > +
> > +error:
> > +       usb_put_dev(cyusbs->usb_dev);
>
> Isn't there a devm_* version of usb_set_intfdata()?

No.

Thanks,
Muthu

This message and any attachments may contain Cypress (or its subsidiaries) confidential information. If it has been received in error, please advise the sender and immediately delete this message.
��.n��������+%������w��{.n�����{��-��)��jg��������ݢj����G�������j:+v���w�m������w�������h�����٥





[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux