Re: [1/5] i2c: i2c-davinci: switch to use platform_get_irq

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Grygorii,

On Thu, Nov 20, 2014 at 12:03:04PM +0200, Grygorii Strashko wrote:
> Switch Davinci I2C driver to use platform_get_irq(), because
> - it is not recommened to use
>   platform_get_resource(pdev, IORESOURCE_IRQ, ..) for requesting IRQ's
>   resources any more, as they can be not ready yet in case of DT-booting.
> - it makes code simpler
> 
> CC: Sekhar Nori <nsekhar@xxxxxx>
> CC: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
> CC: Santosh Shilimkar <ssantosh@xxxxxxxxxx>
> CC: Murali Karicheri <m-karicheri2@xxxxxx>
> Signed-off-by: Grygorii Strashko <grygorii.strashko@xxxxxx>
> ---
>  drivers/i2c/busses/i2c-davinci.c | 14 +++++++-------
>  1 file changed, 7 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
> index 4d96147..9bbfb8f 100644
> --- a/drivers/i2c/busses/i2c-davinci.c
> +++ b/drivers/i2c/busses/i2c-davinci.c
> @@ -640,13 +640,13 @@ static int davinci_i2c_probe(struct platform_device *pdev)
>  {
>  	struct davinci_i2c_dev *dev;
>  	struct i2c_adapter *adap;
> -	struct resource *mem, *irq;
> -	int r;
> +	struct resource *mem;
> +	int r, irq;
>  
> -	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> -	if (!irq) {
> -		dev_err(&pdev->dev, "no irq resource?\n");
> -		return -ENODEV;
> +	irq = platform_get_irq(pdev, 0);
One bad thing about platform_get_irq is its unusual handling of irq=0.
I'm pretty sure you don't want to use this value, so adding something
like:

	if (!irq)
		irq = -ENXIO

would be welcome because the usual value for "invalid irq" is 0 and not
-ESOMETHING. platform_get_irq is one of the very few functions that
don't adhere to this convention. With handling <= 0 as error your code
is immune to changes in this area. Although I notice that
platform_get_irq got worse in this respect to handle -EPROBE_DEFER. hmm.

Apart from your change I wonder if platform_get_irq should handle
of_irq_get returning 0 as an error.

> +	if (irq < 0) {
> +		dev_err(&pdev->dev, "can't get irq resource ret=%d\n", irq);
Please don't print an error if irq=-EPROBE_DEFER.

> +		return irq;
>  	}

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux