Linux Kernel I2C

• Thread Index

• Re: [PATCH] i2c: designware: Revert recent changes to i2c_dw_probe_lock_support()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 4/6] platform/x86: dell-smo8800: Allow using the IIO st_accel driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v2 4/4] i2c: i801: Call i2c_register_spd() on muxed bus segments
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 3/4] i2c: mux: gpio: Allow to call i2c_register_spd on a muxed segment
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 2/4] i2c: mux: add basic support for calling i2c_register_spd on muxed bus segments
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 1/4] i2c: smbus: Prepare i2c_register_spd for usage on muxed segments
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 0/4] i2c: Support i2c_register_spd() on multiplexed bus segments
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v2 4/6] platform/x86: dell-smo8800: Allow using the IIO st_accel driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/4] i2c: mux: add basic support for calling i2c_register_spd on muxed bus segments
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 2/6] platform/x86: dell-smo8800: Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-smo8800
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 2/6] platform/x86: dell-smo8800: Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-smo8800
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/2] i2c: synquacer: Remove a clk reference from struct synquacer_i2c
  • From: Ard Biesheuvel <ardb@xxxxxxxxxx>
• Re: [PATCH 1/2] i2c: synquacer: Fix an error handling path in synquacer_i2c_probe()
  • From: Ard Biesheuvel <ardb@xxxxxxxxxx>
• [PATCH v3 5/5] i2c: muxes: pca954x: Allow sharing reset GPIO
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 4/5] ASoC: codecs: wsa884x: Allow sharing reset GPIO
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 3/5] ASoC: dt-bindings: qcom,wsa8840: Add reset-gpios for shared line
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 2/5] reset: Instantiate reset GPIO controller for shared reset-gpios
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 1/5] reset: gpio: Add GPIO-based reset controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 0/5] reset: gpio: ASoC: shared GPIO resets
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/1] i2c: i2c-qcom-geni: Correct I2C TRE sequence
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 1/1] i2c: i2c-qcom-geni: Correct I2C TRE sequence
  • From: Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx>
• Re: [PATCH] i2c: designware: Revert recent changes to i2c_dw_probe_lock_support()
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: Revert recent changes to i2c_dw_probe_lock_support()
  • From: Kim Phillips <kim.phillips@xxxxxxx>
• Re: [PATCH 2/4] i2c: mux: add basic support for calling i2c_register_spd on muxed bus segments
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: i2c-designware: NULL ptr at RIP: 0010:regmap_read+0x12/0x70
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH] i2c: designware: Revert recent changes to i2c_dw_probe_lock_support()
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: muxes: pca954x: Allow sharing reset GPIO
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] i2c: muxes: pca954x: Allow sharing reset GPIO
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v8 1/1] i2c: lpi2c: use clk notifier for rate changes
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] i2c: smbus: Prepare i2c_register_spd for usage on muxed segments
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 1/4] i2c: smbus: Prepare i2c_register_spd for usage on muxed segments
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: i2c-designware: NULL ptr at RIP: 0010:regmap_read+0x12/0x70
  • From: Kim Phillips <kim.phillips@xxxxxxx>
• [PATCH 3/4] i2c: mux: gpio: Allow to call i2c_register_spd on a muxed segment
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 4/4] i2c: i801: Call i2c_register_spd() on muxed bus segments
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 2/4] i2c: mux: add basic support for calling i2c_register_spd on muxed bus segments
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 1/4] i2c: smbus: Prepare i2c_register_spd for usage on muxed segments
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 0/4] i2c: Support i2c_register_spd() on multiplexed bus segments
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH] i2c: cadence: Avoid fifo clear after start
  • From: Michal Simek <michal.simek@xxxxxxx>
• [PATCH v8 1/1] i2c: lpi2c: use clk notifier for rate changes
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• Re: Re: [lvc-project] [PATCH] i2c: Fix NULL pointer dereference in npcm_i2c_reg_slave
  • From: Fedor Pchelkin <pchelkin@xxxxxxxxx>
• Re: [PATCH v3 03/12] dt-bindings: serial: samsung: do not allow reg-io-width for gs101
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re: [PATCH] i2c: Fix NULL pointer dereference in npcm_i2c_reg_slave
  • From: Tali Perry <tali.perry1@xxxxxxxxx>
• Re: [PATCH v3 06/12] tty: serial: samsung: add gs101 earlycon support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 05/12] tty: serial: samsung: set UPIO_MEM32 iotype for gs101
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 04/12] tty: serial: samsung: prepare for different IO types
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 03/12] dt-bindings: serial: samsung: do not allow reg-io-width for gs101
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 02/12] dt-bindings: i2c: exynos5: add google,gs101-hsi2c compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 01/12] dt-bindings: clock: google,gs101-clock: add PERIC0 clock management unit
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re: [PATCH v2 01/12] dt-bindings: clock: google,gs101-clock: add PERIC0 clock management unit
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 01/12] dt-bindings: clock: google,gs101-clock: add PERIC0 clock management unit
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re: [PATCH v2 01/12] dt-bindings: clock: google,gs101-clock: add PERIC0 clock management unit
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] i2c: Fix NULL pointer dereference in npcm_i2c_reg_slave
  • From: Rand Deeb <rand.sec96@xxxxxxxxx>
• [PATCH v3 12/12] arm64: dts: exynos: gs101: enable eeprom on gs101-oriole
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v3 11/12] arm64: dts: exynos: gs101: define USI8 with I2C configuration
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v3 10/12] arm64: dts: exynos: gs101: update USI UART to use peric0 clocks
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v3 09/12] arm64: dts: exynos: gs101: enable cmu-peric0 clock controller
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v3 08/12] arm64: dts: exynos: gs101: remove reg-io-width from serial
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v3 07/12] clk: samsung: gs101: add support for cmu_peric0
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v3 06/12] tty: serial: samsung: add gs101 earlycon support
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v3 05/12] tty: serial: samsung: set UPIO_MEM32 iotype for gs101
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v3 04/12] tty: serial: samsung: prepare for different IO types
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v3 02/12] dt-bindings: i2c: exynos5: add google,gs101-hsi2c compatible
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v3 03/12] dt-bindings: serial: samsung: do not allow reg-io-width for gs101
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v3 01/12] dt-bindings: clock: google,gs101-clock: add PERIC0 clock management unit
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v3 00/12] GS101 Oriole: CMU_PERIC0 support and USI updates
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re: [PATCH v2 01/12] dt-bindings: clock: google,gs101-clock: add PERIC0 clock management unit
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re: [PATCH v2 01/12] dt-bindings: clock: google,gs101-clock: add PERIC0 clock management unit
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: i2c-designware: NULL ptr at RIP: 0010:regmap_read+0x12/0x70
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 01/12] dt-bindings: clock: google,gs101-clock: add PERIC0 clock management unit
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 01/12] dt-bindings: clock: google,gs101-clock: add PERIC0 clock management unit
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 5/6] platform/x86: dell-smo8800: Instantiate an i2c_client for the IIO st_accel driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v4 02/24] gpiolib: acpi: Modify acpi_dev_irq_wake_get_by() to use resource
  • From: Mark Hasemeyer <markhas@xxxxxxxxxxxx>
• Re: [PATCH 4/6] platform/x86: dell-smo8800: Pass the IRQ to the lis3lv02d i2c_client
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 12/12] arm64: dts: exynos: gs101: enable eeprom on gs101-oriole
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH v2 09/12] arm64: dts: exynos: gs101: enable cmu-peric0 clock controller
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH v2 08/12] arm64: dts: exynos: gs101: remove reg-io-width from serial
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH v6 0/2] platform/x86: p2sb: Fix deadlock at sysfs PCI bus rescan
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 07/12] clk: samsung: gs101: add support for cmu_peric0
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH v2 06/12] tty: serial: samsung: add gs101 earlycon support
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH v2 05/12] tty: serial: samsung: set UPIO_MEM32 iotype for gs101
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH v2 03/12] dt-bindings: serial: samsung: do not allow reg-io-width for gs101
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH] i2c: rcar: Prepare for the advent of ARCH_RCAR_GEN4
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH v2 02/12] dt-bindings: i2c: exynos5: add google,gs101-hsi2c compatible
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH v2 01/12] dt-bindings: clock: google,gs101-clock: add PERIC0 clock management unit
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: Dell contacts (was: [PATCH 6/6] platform/x86: dell-smo8800: Add support for probing for the accelerometer i2c address)
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Dell contacts (was: [PATCH 6/6] platform/x86: dell-smo8800: Add support for probing for the accelerometer i2c address)
  • From: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
• Re: [PATCH 0/6] i2c-i801 / dell-smo8800: Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-smo8800
  • From: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
• Re: [PATCH v6 0/2] platform/x86: p2sb: Fix deadlock at sysfs PCI bus rescan
  • From: Klara Modin <klarasmodin@xxxxxxxxx>
• Re: [PATCH 3/6] platform/x86: dell-smo8800: Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-smo8800
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v6 2/2] platform/x86: p2sb: Use pci_resource_n() in p2sb_read_bar0()
  • From: "Shin'ichiro Kawasaki" <shinichiro.kawasaki@xxxxxxx>
• [PATCH v6 1/2] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: "Shin'ichiro Kawasaki" <shinichiro.kawasaki@xxxxxxx>
• [PATCH v6 0/2] platform/x86: p2sb: Fix deadlock at sysfs PCI bus rescan
  • From: "Shin'ichiro Kawasaki" <shinichiro.kawasaki@xxxxxxx>
• RE: [PATCH v2] i2c: cadence: Add system suspend and resume PM support
  • From: JiSheng Teoh <jisheng.teoh@xxxxxxxxxxxxxxxx>
• [PATCH] i2c: muxes: pca954x: Allow sharing reset GPIO
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/6] platform/x86: dell-smo8800: Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-smo8800
  • From: Pali Rohár <pali@xxxxxxxxxx>
• Re: [PATCH v2 2/6] platform/x86: dell-smo8800: Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-smo8800
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [PATCH v2 2/6] platform/x86: dell-smo8800: Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-smo8800
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH v4 1/1] i2c: busses: i2c-mv64xxx: fix arb-loss i2c lock
  • From: Elad Nachman <enachman@xxxxxxxxxxx>
• [PATCH v4 0/1] i2c: busses: i2c-mv64xxx: fix arb-loss i2c lock
  • From: Elad Nachman <enachman@xxxxxxxxxxx>
• Re: [PATCH v2 2/6] platform/x86: dell-smo8800: Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-smo8800
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PULL REQUEST] i2c-for-6.7-final
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH v5 00/24] i2c: designware: code consolidation & cleanups
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 2/6] platform/x86: dell-smo8800: Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-smo8800
  • From: Pali Rohár <pali@xxxxxxxxxx>
• Re: [PATCH v2 2/6] platform/x86: dell-smo8800: Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-smo8800
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH 0/6] i2c-i801 / dell-smo8800: Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-smo8800
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 6/6] platform/x86: dell-smo8800: Add a couple more models to dell_lis3lv02d_devices[]
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 5/6] platform/x86: dell-smo8800: Add support for probing for the accelerometer i2c address
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 4/6] platform/x86: dell-smo8800: Allow using the IIO st_accel driver
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 1/6] platform/x86: dell-smo8800: Change probe() ordering a bit
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 2/6] platform/x86: dell-smo8800: Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-smo8800
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 3/6] platform/x86: dell-smo8800: Pass the IRQ to the lis3lv02d i2c_client
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 0/6] i2c-i801 / dell-smo8800: Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-smo8800
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: i2c-designware: NULL ptr at RIP: 0010:regmap_read+0x12/0x70
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 00/24] i2c: designware: code consolidation & cleanups
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 02/24] gpiolib: acpi: Modify acpi_dev_irq_wake_get_by() to use resource
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 03/24] i2c: acpi: Modify i2c_acpi_get_irq() to use resource
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH 6/6] platform/x86: dell-smo8800: Add support for probing for the accelerometer i2c address
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 0/6] i2c-i801 / dell-smo8800: Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-smo8800
  • From: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
• [PULL REQUEST] i2c-for-6.7-final
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH 2/2] i2c: synquacer: Remove a clk reference from struct synquacer_i2c
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH 1/2] i2c: synquacer: Fix an error handling path in synquacer_i2c_probe()
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH 3/6] platform/x86: dell-smo8800: Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-smo8800
  • From: Pali Rohár <pali@xxxxxxxxxx>
• Re: [PATCH 3/6] platform/x86: dell-smo8800: Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-smo8800
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v5 1/2] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: Shinichiro Kawasaki <shinichiro.kawasaki@xxxxxxx>
• [PATCH v1] i2c: new i2c-pseudo driver for userspace i2c adapters
  • From: Matthew Blecker <matthewb@xxxxxxxxxxxx>
• Re: [PATCH 5/6] platform/x86: dell-smo8800: Instantiate an i2c_client for the IIO st_accel driver
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 5/6] platform/x86: dell-smo8800: Instantiate an i2c_client for the IIO st_accel driver
  • From: Pali Rohár <pali@xxxxxxxxxx>
• Re: [PATCH 5/6] platform/x86: dell-smo8800: Instantiate an i2c_client for the IIO st_accel driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 6/6] platform/x86: dell-smo8800: Add support for probing for the accelerometer i2c address
  • From: Pali Rohár <pali@xxxxxxxxxx>
• Re: [PATCH 5/6] platform/x86: dell-smo8800: Instantiate an i2c_client for the IIO st_accel driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 5/6] platform/x86: dell-smo8800: Instantiate an i2c_client for the IIO st_accel driver
  • From: Pali Rohár <pali@xxxxxxxxxx>
• Re: [PATCH 3/6] platform/x86: dell-smo8800: Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-smo8800
  • From: Pali Rohár <pali@xxxxxxxxxx>
• Re: [PATCH 6/6] platform/x86: dell-smo8800: Add support for probing for the accelerometer i2c address
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 5/6] platform/x86: dell-smo8800: Instantiate an i2c_client for the IIO st_accel driver
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 3/6] platform/x86: dell-smo8800: Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-smo8800
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 1/6] platform/x86: dell-smo8800: Only load on Dell laptops
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH] i2c: wmt: Fix an error handling path in wmt_i2c_probe()
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH v9 12/13] ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v9 13/13] ARM: dts: stm32: put ETZPC as an access controller for STM32MP13x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v9 09/13] bus: etzpc: introduce ETZPC firewall controller driver
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v9 08/13] arm64: dts: st: add RIFSC as an access controller for STM32MP25x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v9 10/13] ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v9 11/13] ARM: dts: stm32: put ETZPC as an access controller for STM32MP15x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v9 06/13] of: property: fw_devlink: Add support for "access-controller"
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v9 07/13] bus: rifsc: introduce RIFSC firewall controller driver
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v9 04/13] dt-bindings: bus: document ETZPC
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v9 05/13] firewall: introduce stm32_firewall framework
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v9 01/13] dt-bindings: document generic access controllers
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v9 02/13] dt-bindings: treewide: add access-controllers description
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v9 03/13] dt-bindings: bus: document RIFSC
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v9 00/13] Introduce STM32 Firewall framework
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH] i2c: cadence: Avoid fifo clear after start
  • From: Sai Pavan Boddu <sai.pavan.boddu@xxxxxxx>
• Re: [PATCH v5 1/2] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: Klara Modin <klarasmodin@xxxxxxxxx>
• Re: [PATCH v2 0/4] i2c: thunderx: Marvell thunderx i2c changes
  • From: Robert Richter <rric@xxxxxxxxxx>
• Re: [PATCH v5 1/2] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: Shinichiro Kawasaki <shinichiro.kawasaki@xxxxxxx>
• Re: [PATCH v2 04/12] tty: serial: samsung: prepare for different IO types
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re: [PATCH v5 00/24] i2c: designware: code consolidation & cleanups
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] eeprom: at24: Use pm_runtime_resume_and_get to simplify the code
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] eeprom: at24: Use pm_runtime_resume_and_get to simplify the code
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH] eeprom: at24: Use pm_runtime_resume_and_get to simplify the code
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH] eeprom: at24: Use pm_runtime_resume_and_get to simplify the code
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v5 1/2] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v8 03/13] dt-bindings: bus: document RIFSC
  • From: Gatien CHEVALLIER <gatien.chevallier@xxxxxxxxxxx>
• Re: [PATCH v5 1/2] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: Shinichiro Kawasaki <shinichiro.kawasaki@xxxxxxx>
• [PATCH v7 6/6] i2c: add zhaoxin i2c controller driver
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• [PATCH v7 0/6] i2c: add zhaoxin i2c controller driver
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• [PATCH v7 5/6] i2c: wmt: add platform type VIAI2C_PLAT_WMT
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• [PATCH v7 2/6] i2c: wmt: split out common files
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• [PATCH v7 1/6] i2c: wmt: create wmt_i2c_init for general init
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• [PATCH v7 4/6] i2c: wmt: fix a bug when thread blocked
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• [PATCH v7 3/6] i2c: wmt: rename something
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• Re: [PATCH v2 0/4] i2c: thunderx: Marvell thunderx i2c changes
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH] i2c: core: Fix atomic xfer check for non-preempt config
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 04/12] tty: serial: samsung: prepare for different IO types
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 04/12] tty: serial: samsung: prepare for different IO types
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re: [PATCH v2 04/12] tty: serial: samsung: prepare for different IO types
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: i2c-designware: NULL ptr at RIP: 0010:regmap_read+0x12/0x70
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 6/8] i2c: wmt: fix a bug when thread blocked
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v6 4/8] i2c: wmt: split out common files
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v5 1/2] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v5 1/2] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: Klara Modin <klarasmodin@xxxxxxxxx>
• [PATCH] Revert "platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe"
  • From: "Shin'ichiro Kawasaki" <shinichiro.kawasaki@xxxxxxx>
• Re: [PATCH v3 1/1] i2c: busses: i2c-mv64xxx: fix arb-loss i2c lock
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v6 6/8] i2c: wmt: fix a bug when thread blocked
  • From: Hans Hu <HansHu-oc@xxxxxxxxxxx>
• Re: [PATCH v6 4/8] i2c: wmt: split out common files
  • From: Hans Hu <HansHu-oc@xxxxxxxxxxx>
• Re: [PATCH] i2c: core: Fix atomic xfer check for non-preempt config
  • From: Tor Vic <torvic9@xxxxxxxxxxx>
• Re: [PATCH v6 4/8] i2c: wmt: split out common files
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH] i2c: core: Fix atomic xfer check for non-preempt config
  • From: Michael Walle <mwalle@xxxxxxxxxx>
• Re: [PATCH v6 6/8] i2c: wmt: fix a bug when thread blocked
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v5 1/2] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: Shinichiro Kawasaki <shinichiro.kawasaki@xxxxxxx>
• [PATCH] i2c: core: Fix atomic xfer check for non-preempt config
  • From: Benjamin Bara <bbara93@xxxxxxxxx>
• Re: [PATCH v6 8/8] i2c: add zhaoxin i2c controller driver
  • From: Hans Hu <HansHu-oc@xxxxxxxxxxx>
• Re: [PATCH v6 6/8] i2c: wmt: fix a bug when thread blocked
  • From: Hans Hu <HansHu-oc@xxxxxxxxxxx>
• Re: [PATCH v6 5/8] i2c: wmt: rename with prefix VIAI2C_ and viai2c_
  • From: Hans Hu <HansHu-oc@xxxxxxxxxxx>
• Re: [PATCH v6 4/8] i2c: wmt: split out common files
  • From: Hans Hu <HansHu-oc@xxxxxxxxxxx>
• Re: [PATCH v6 3/8] i2c: wmt: adjust line length to meet style
  • From: Hans Hu <HansHu-oc@xxxxxxxxxxx>
• Re: [PATCH v6 1/8] i2c: wmt: create wmt_i2c_init for general init
  • From: Hans Hu <HansHu-oc@xxxxxxxxxxx>
• Re: [PATCH v5 1/2] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: Klara Modin <klarasmodin@xxxxxxxxx>
• Re: [PATCH v6 0/8] i2c: add zhaoxin i2c controller driver
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v6 8/8] i2c: add zhaoxin i2c controller driver
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v6 6/8] i2c: wmt: fix a bug when thread blocked
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v6 5/8] i2c: wmt: rename with prefix VIAI2C_ and viai2c_
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v6 4/8] i2c: wmt: split out common files
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v6 3/8] i2c: wmt: adjust line length to meet style
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: i2c-designware: NULL ptr at RIP: 0010:regmap_read+0x12/0x70
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 2/5] Re: i2c: core: run atomic i2c xfer when !preemptible
  • From: Michael Walle <mwalle@xxxxxxxxxx>
• Re: [PATCH v6 2/8] i2c: wmt: rename marcos with prefix WMTI2C_
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v6 1/8] i2c: wmt: create wmt_i2c_init for general init
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v7 2/5] Re: i2c: core: run atomic i2c xfer when !preemptible
  • From: Benjamin Bara <bbara93@xxxxxxxxx>
• Re: WARNING: No atomic I2C transfer handler for 'i2c-4' at drivers/i2c/i2c-core.h:40 i2c_smbus_xfer+0x178/0x190 (kernel 6.6.X, 6.7-rcX, PowerMac G5 11,2)
  • From: Tor Vic <torvic9@xxxxxxxxxxx>
• Re: [PATCH v7 2/5] Re: i2c: core: run atomic i2c xfer when !preemptible
  • From: Michael Walle <mwalle@xxxxxxxxxx>
• [PATCH v4 03/24] i2c: acpi: Modify i2c_acpi_get_irq() to use resource
  • From: Mark Hasemeyer <markhas@xxxxxxxxxxxx>
• [PATCH v4 02/24] gpiolib: acpi: Modify acpi_dev_irq_wake_get_by() to use resource
  • From: Mark Hasemeyer <markhas@xxxxxxxxxxxx>
• [PATCH v4 00/24] Improve IRQ wake capability reporting and update the cros_ec driver to use it
  • From: Mark Hasemeyer <markhas@xxxxxxxxxxxx>
• Re: [PATCH v7 2/5] Re: i2c: core: run atomic i2c xfer when !preemptible
  • From: Benjamin Bara <bbara93@xxxxxxxxx>
• Re: [PATCH v3 02/24] gpiolib: acpi: Modify acpi_dev_irq_wake_get_by() to use resource
  • From: Mark Hasemeyer <markhas@xxxxxxxxxxxx>
• [PATCH v7 2/5] Re: i2c: core: run atomic i2c xfer when !preemptible
  • From: Michael Walle <mwalle@xxxxxxxxxx>
• Re: i2c-designware: NULL ptr at RIP: 0010:regmap_read+0x12/0x70
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 11/12] arm64: dts: exynos: gs101: define USI8 with I2C configuration
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re: [PATCH v5 1/2] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• i2c-designware: NULL ptr at RIP: 0010:regmap_read+0x12/0x70
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: [PATCH v2 10/12] arm64: dts: exynos: gs101: update USI UART to use peric0 clocks
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re: [PATCH v2 11/12] arm64: dts: exynos: gs101: define USI8 with I2C configuration
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v5 2/2] platform/x86: p2sb: Use pci_resource_n() in p2sb_read_bar0()
  • From: "Shin'ichiro Kawasaki" <shinichiro.kawasaki@xxxxxxx>
• [PATCH v5 1/2] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: "Shin'ichiro Kawasaki" <shinichiro.kawasaki@xxxxxxx>
• [PATCH v5 0/2] platform/x86: p2sb: Fix deadlock at sysfs PCI bus rescan
  • From: "Shin'ichiro Kawasaki" <shinichiro.kawasaki@xxxxxxx>
• [PATCH v6 6/8] i2c: wmt: fix a bug when thread blocked
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• [PATCH v6 7/8] i2c: wmt: add platform type VIAI2C_PLAT_WMT
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• [PATCH v6 8/8] i2c: add zhaoxin i2c controller driver
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• [PATCH v6 1/8] i2c: wmt: create wmt_i2c_init for general init
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• [PATCH v6 0/8] i2c: add zhaoxin i2c controller driver
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• [PATCH v6 5/8] i2c: wmt: rename with prefix VIAI2C_ and viai2c_
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• [PATCH v6 4/8] i2c: wmt: split out common files
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• [PATCH v6 3/8] i2c: wmt: adjust line length to meet style
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• [PATCH v6 2/8] i2c: wmt: rename marcos with prefix WMTI2C_
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• Re: [PATCH v5 8/8] i2c: add zhaoxin i2c controller driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v4] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: Shinichiro Kawasaki <shinichiro.kawasaki@xxxxxxx>
• Re: [PATCH v4] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 10/12] arm64: dts: exynos: gs101: update USI UART to use peric0 clocks
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• Re: [PATCH v2 11/12] arm64: dts: exynos: gs101: define USI8 with I2C configuration
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• [PATCH v2 12/12] arm64: dts: exynos: gs101: enable eeprom on gs101-oriole
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v2 11/12] arm64: dts: exynos: gs101: define USI8 with I2C configuration
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v2 10/12] arm64: dts: exynos: gs101: update USI UART to use peric0 clocks
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v2 09/12] arm64: dts: exynos: gs101: enable cmu-peric0 clock controller
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v2 08/12] arm64: dts: exynos: gs101: remove reg-io-width from serial
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v2 07/12] clk: samsung: gs101: add support for cmu_peric0
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v2 06/12] tty: serial: samsung: add gs101 earlycon support
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v2 05/12] tty: serial: samsung: set UPIO_MEM32 iotype for gs101
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v2 03/12] dt-bindings: serial: samsung: do not allow reg-io-width for gs101
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v2 04/12] tty: serial: samsung: prepare for different IO types
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v2 01/12] dt-bindings: clock: google,gs101-clock: add PERIC0 clock management unit
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v2 02/12] dt-bindings: i2c: exynos5: add google,gs101-hsi2c compatible
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v2 00/12] GS101 Oriole: CMU_PERIC0 support and USI updates
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re: [PATCH 02/13] dt-bindings: clock: google,gs101-clock: add PERIC0 clock management unit
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re: [PATCH 02/13] dt-bindings: clock: google,gs101-clock: add PERIC0 clock management unit
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v5 8/8] i2c: add zhaoxin i2c controller driver
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• [PATCH v5 7/8] i2c: wmt: add platform type VIAI2C_PLAT_WMT
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• [PATCH v5 3/8] i2c: wmt: adjust line length to meet style
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• [PATCH v5 2/8] i2c: wmt: rename marcos with prefix WMTI2C_
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• [PATCH v5 6/8] i2c: wmt: fix a bug when thread blocked
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• [PATCH v5 4/8] i2c: wmt: split out common files
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• [PATCH v5 5/8] i2c: wmt: rename with prefix VIAI2C_ and viai2c_
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• [PATCH v5 1/8] i2c: wmt: create wmt_i2c_init for general init
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• [PATCH v5 0/8] i2c: add zhaoxin i2c controller driver
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• Re: [PATCH v4 1/8] i2c: wmt: create wmt_i2c_init for general init
  • From: Hans Hu <HansHu-oc@xxxxxxxxxxx>
• Re: [PATCH] Documentation/i2c: fix spelling error in i2c-address-translators i2c-address-translators
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v4 1/8] i2c: wmt: create wmt_i2c_init for general init
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v4] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 03/24] i2c: acpi: Modify i2c_acpi_get_irq() to use resource
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 02/24] gpiolib: acpi: Modify acpi_dev_irq_wake_get_by() to use resource
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 00/22] Improve IRQ wake capability reporting and update the cros_ec driver to use it
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH 02/13] dt-bindings: clock: google,gs101-clock: add PERIC0 clock management unit
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v4] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: "Shin'ichiro Kawasaki" <shinichiro.kawasaki@xxxxxxx>
• [PATCH v4 3/8] i2c: wmt: adjust line length to meet style
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• [PATCH v4 2/8] i2c: wmt: rename marcos with prefix WMTI2C_
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• [PATCH v4 1/8] i2c: wmt: create wmt_i2c_init for general init
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• [PATCH v4 8/8] i2c: add zhaoxin i2c controller driver
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• [PATCH v4 0/8] i2c: add zhaoxin i2c controller driver
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• [PATCH v4 4/8] i2c: wmt: split out common files
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• [PATCH v4 7/8] i2c: wmt: add platform type VIAI2C_PLAT_WMT
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• [PATCH v4 5/8] i2c: wmt: rename with prefix VIAI2C_ and viai2c_
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• [PATCH v4 6/8] i2c: wmt: fix a bug when thread blocked
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• Re: [PATCH v3] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: Shinichiro Kawasaki <shinichiro.kawasaki@xxxxxxx>
• Re: [PATCH v3] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• [PATCH v3 03/24] i2c: acpi: Modify i2c_acpi_get_irq() to use resource
  • From: Mark Hasemeyer <markhas@xxxxxxxxxxxx>
• [PATCH v3 02/24] gpiolib: acpi: Modify acpi_dev_irq_wake_get_by() to use resource
  • From: Mark Hasemeyer <markhas@xxxxxxxxxxxx>
• [PATCH v3 00/24] Improve IRQ wake capability reporting and update the cros_ec driver to use it
  • From: Mark Hasemeyer <markhas@xxxxxxxxxxxx>
• Re: omap-i2c: runtime pm issue during suspend to ram
  • From: Thomas Richard <thomas.richard@xxxxxxxxxxx>
• [PATCH v4] acpi,pci: warn about duplicate IRQ routing entries returned from _PRT
  • From: Mateusz Jończyk <mat.jonczyk@xxxxx>
• [PATCH AUTOSEL 5.10 8/9] i2c: rk3x: fix potential spinlock recursion on poll
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 10/11] i2c: rk3x: fix potential spinlock recursion on poll
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 19/24] i2c: rk3x: fix potential spinlock recursion on poll
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 31/39] i2c: rk3x: fix potential spinlock recursion on poll
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 3/6] platform/x86: dell-smo8800: Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-smo8800
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v3] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: "Shin'ichiro Kawasaki" <shinichiro.kawasaki@xxxxxxx>
• Re: [PATCH v2] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: Shinichiro Kawasaki <shinichiro.kawasaki@xxxxxxx>
• Re: [PATCH 6/6] platform/x86: dell-smo8800: Add support for probing for the accelerometer i2c address
  • From: Pali Rohár <pali@xxxxxxxxxx>
• Re: [PATCH 5/6] platform/x86: dell-smo8800: Instantiate an i2c_client for the IIO st_accel driver
  • From: Pali Rohár <pali@xxxxxxxxxx>
• Re: [PATCH 3/6] platform/x86: dell-smo8800: Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-smo8800
  • From: Pali Rohár <pali@xxxxxxxxxx>
• Re: [PATCH 1/6] platform/x86: dell-smo8800: Only load on Dell laptops
  • From: Pali Rohár <pali@xxxxxxxxxx>
• [PATCH 6/6] platform/x86: dell-smo8800: Add support for probing for the accelerometer i2c address
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 5/6] platform/x86: dell-smo8800: Instantiate an i2c_client for the IIO st_accel driver
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 4/6] platform/x86: dell-smo8800: Pass the IRQ to the lis3lv02d i2c_client
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 3/6] platform/x86: dell-smo8800: Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-smo8800
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 2/6] platform/x86: dell-smo8800: Change probe() ordering a bit
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 1/6] platform/x86: dell-smo8800: Only load on Dell laptops
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 0/6] i2c-i801 / dell-smo8800: Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-smo8800
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] Documentation/i2c: fix spelling error in i2c-address-translators i2c-address-translators
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH] Documentation/i2c: fix spelling error in i2c-address-translators i2c-address-translators
  • From: attreyee-muk <tintinm2017@xxxxxxxxx>
• Re: Ideas for a generic solution to support accelerometer lis3lv02d in Dell laptops/notebooks?
  • From: Pali Rohár <pali@xxxxxxxxxx>
• Re: Ideas for a generic solution to support accelerometer lis3lv02d in Dell laptops/notebooks?
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: Ideas for a generic solution to support accelerometer lis3lv02d in Dell laptops/notebooks?
  • From: Pali Rohár <pali@xxxxxxxxxx>
• Re: Ideas for a generic solution to support accelerometer lis3lv02d in Dell laptops/notebooks?
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: Ideas for a generic solution to support accelerometer lis3lv02d in Dell laptops/notebooks?
  • From: Pali Rohár <pali@xxxxxxxxxx>
• Ideas for a generic solution to support accelerometer lis3lv02d in Dell laptops/notebooks?
  • From: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
• Re: [PATCH v2 01/22] gpiolib: acpi: Modify acpi_dev_irq_wake_get_by() to use resource
  • From: Mark Hasemeyer <markhas@xxxxxxxxxxxx>
• Re: [PATCH v2 01/22] gpiolib: acpi: Modify acpi_dev_irq_wake_get_by() to use resource
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 00/22] Improve IRQ wake capability reporting and update the cros_ec driver to use it
  • From: Mark Hasemeyer <markhas@xxxxxxxxxxxx>
• WARNING: No atomic I2C transfer handler for 'i2c-4' at drivers/i2c/i2c-core.h:40 i2c_smbus_xfer+0x178/0x190 (kernel 6.6.X, 6.7-rcX, PowerMac G5 11,2)
  • From: Erhard Furtner <erhard_f@xxxxxxxxxxx>
• Re: [PATCH 02/13] dt-bindings: clock: google,gs101-clock: add PERIC0 clock management unit
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PULL REQUEST] i2c-for-6.7-rc8
  • From: pr-tracker-bot@xxxxxxxxxx
• [PATCH RFC 3/3] i2c: i801: Call i2c_register_spd() on muxed bus segments
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH RFC 2/3] i2c: mux: gpio: Allow to call i2c_register_spd on a muxed segment
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH RFC 1/3] i2c: smbus: Prepare i2c_register_spd for use on muxed segments
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH RFC 0/3] i2c: Enable calling i2c_register_spd() on muxed bus segments
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v2] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 07/12] i2c: wmt: create wmt_i2c_init for general init
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PULL REQUEST] i2c-for-6.7-rc8
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3 07/12] i2c: wmt: create wmt_i2c_init for general init
  • From: Hans Hu <HansHu-oc@xxxxxxxxxxx>
• Re: [PATCH v3 6/9] i2c: stm32f7: add support for stm32mp25 soc
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3 5/9] i2c: stm32f7: perform I2C_ISR read once at beginning of event isr
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3 4/9] dt-bindings: i2c: document st,stm32mp25-i2c compatible
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3 3/9] i2c: stm32f7: simplify status messages in case of errors
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3 2/9] i2c: stm32f7: perform most of irq job in threaded handler
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3 1/9] i2c: stm32f7: use dev_err_probe upon calls of devm_request_irq
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 2/2] i2c: i801: Add 0x29 as I²C address for lis3lv02d in Dell XPS 15 7590
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 1/2] i2c: i801: Add 0x29 as I²C address for lis3lv02d in Dell Precision 3540
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [RESEND PATCH v5 1/2] dt-bindings: i2c: pca954x: Add custom properties for MAX7357
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3 07/12] i2c: wmt: create wmt_i2c_init for general init
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3 04/12] i2c: wmt: Reduce redundant: REG_CR setting
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3 06/12] i2c: wmt: delete .remove_new
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3 05/12] i2c: wmt: Reduce redundant: function parameter
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3 04/12] i2c: wmt: Reduce redundant: REG_CR setting
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3 03/12] i2c: wmt: Reduce redundant: clock mode setting
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3 02/12] i2c: wmt: Reduce redundant: wait event complete
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3 01/12] i2c: wmt: Reduce redundant: bus busy check
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2] i2c: rk3x: fix potential spinlock recursion on poll
  • From: Jensen Huang <jensenhuang@xxxxxxxxxxxxxxx>
• [PATCH v2] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: "Shin'ichiro Kawasaki" <shinichiro.kawasaki@xxxxxxx>
• Re: [PATCH v1] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: Shinichiro Kawasaki <shinichiro.kawasaki@xxxxxxx>
• Re: [PATCH 2/2] i2c: i801: Add 0x29 as I²C address for lis3lv02d in Dell XPS 15 7590
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 1/2] i2c: i801: Add 0x29 as I²C address for lis3lv02d in Dell Precision 3540
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v8 06/13] of: property: fw_devlink: Add support for "access-controller"
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v8 04/13] dt-bindings: bus: document ETZPC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v8 03/13] dt-bindings: bus: document RIFSC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v8 01/13] dt-bindings: document generic access controllers
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v1] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 01/22] gpiolib: acpi: Modify acpi_dev_irq_wake_get_by() to use resource
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 02/22] i2c: acpi: Modify i2c_acpi_get_irq() to use resource
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 00/22] Improve IRQ wake capability reporting and update the cros_ec driver to use it
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• [PATCH v1] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: "Shin'ichiro Kawasaki" <shinichiro.kawasaki@xxxxxxx>
• Re: [RESEND PATCH v5 1/2] dt-bindings: i2c: pca954x: Add custom properties for MAX7357
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 05/13] tty: serial: samsung: add gs101 earlycon support
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re: [PATCH 02/13] dt-bindings: clock: google,gs101-clock: add PERIC0 clock management unit
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re: [PATCH v6 1/2] dt-bindings: i2c: add bus-reset-gpios property
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH v2 02/22] i2c: acpi: Modify i2c_acpi_get_irq() to use resource
  • From: Mark Hasemeyer <markhas@xxxxxxxxxxxx>
• [PATCH v2 01/22] gpiolib: acpi: Modify acpi_dev_irq_wake_get_by() to use resource
  • From: Mark Hasemeyer <markhas@xxxxxxxxxxxx>
• [PATCH v2 00/22] Improve IRQ wake capability reporting and update the cros_ec driver to use it
  • From: Mark Hasemeyer <markhas@xxxxxxxxxxxx>
• Re: [PATCH] i2c: i801: Use I2C_CLASS_HWMON for i2c mux children
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH] i2c: mux: reg: Remove class-based device auto-detection support
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [RESEND PATCH v5 1/2] dt-bindings: i2c: pca954x: Add custom properties for MAX7357
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: mux: reg: Remove class-based device auto-detection support
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 2/2] i2c: i801: Add 0x29 as I²C address for lis3lv02d in Dell XPS 15 7590
  • From: Pali Rohár <pali@xxxxxxxxxx>
• Re: [PATCH 1/2] i2c: i801: Add 0x29 as I²C address for lis3lv02d in Dell Precision 3540
  • From: Pali Rohár <pali@xxxxxxxxxx>
• [PATCH 2/2] i2c: i801: Add 0x29 as I²C address for lis3lv02d in Dell XPS 15 7590
  • From: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
• [PATCH 1/2] i2c: i801: Add 0x29 as I²C address for lis3lv02d in Dell Precision 3540
  • From: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
• Re: [PATCH 07/13] clk: samsung: gs101: mark PERIC0 IP TOP gate clock as critical
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH] eeprom: at24: Use pm_runtime_resume_and_get to simplify the code
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 02/13] dt-bindings: clock: google,gs101-clock: add PERIC0 clock management unit
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 07/13] clk: samsung: gs101: mark PERIC0 IP TOP gate clock as critical
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re: omap-i2c: runtime pm issue during suspend to ram
  • From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
• [PATCH RESUBMIT] eeprom: at24: Probe for DDR3 thermal sensor in the SPD case
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• eeprom: at24: Probe for DDR3 thermal sensor in the SPD case
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v6 1/2] dt-bindings: i2c: add bus-reset-gpios property
  • From: "wsa@xxxxxxxxxx" <wsa@xxxxxxxxxx>
• Re: omap-i2c: runtime pm issue during suspend to ram
  • From: Thomas Richard <thomas.richard@xxxxxxxxxxx>
• Re: [PATCH v6 1/2] dt-bindings: i2c: add bus-reset-gpios property
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: omap-i2c: runtime pm issue during suspend to ram
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v6 1/2] dt-bindings: i2c: add bus-reset-gpios property
  • From: "wsa@xxxxxxxxxx" <wsa@xxxxxxxxxx>
• Re: omap-i2c: runtime pm issue during suspend to ram
  • From: Thomas Richard <thomas.richard@xxxxxxxxxxx>
• Re: Re: [PATCH] i2c: i2c-imx: allow bus recovery on non-muxable pads
  • From: Gregor Herburger <gregor.herburger@xxxxxxxxxxxxxxx>
• [RESEND PATCH v5 2/2] i2c: muxes: pca954x: Enable features on MAX7357
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• [RESEND PATCH v5 1/2] dt-bindings: i2c: pca954x: Add custom properties for MAX7357
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• Re: [PATCH v6 1/2] dt-bindings: i2c: add bus-reset-gpios property
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v6 1/2] dt-bindings: i2c: add bus-reset-gpios property
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v3 3/8] i2c: rk3x: Adjust mask/value offset for i2c2 on rv1126
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH v3 3/8] i2c: rk3x: Adjust mask/value offset for i2c2 on rv1126
  • From: Tim Lunn <tim@xxxxxxxxxxxxxx>
• [PATCH] eeprom: ee1004: add support for temperature sensor
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH] i2c: mux: reg: Remove class-based device auto-detection support
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v2] eeprom: ee1004: Add support for multiple i2c busses
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [GIT PULL] at24: updates for v6.8
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: make i2c_bus_type const
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v4 1/2] i2c: aspeed: Handle the coalesced stop conditions with the start conditions.
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v6 1/2] dt-bindings: i2c: add bus-reset-gpios property
  • From: "wsa@xxxxxxxxxx" <wsa@xxxxxxxxxx>
• Re: [PATCH v6 1/2] dt-bindings: i2c: add bus-reset-gpios property
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 07/13] clk: samsung: gs101: mark PERIC0 IP TOP gate clock as critical
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH v2] i2c: rk3x: fix potential spinlock recursion on poll
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2] i2c: cpm: Remove linux,i2c-index conversion from be32
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 1/1] i2c: imx: Make SDA actually optional for bus recovering
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• omap-i2c: runtime pm issue during suspend to ram
  • From: Thomas Richard <thomas.richard@xxxxxxxxxxx>
• Re: [PATCH] i2c: qcom-geni: fix missing clk_disable_unprepare() and geni_se_resources_off()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: smbus: Support up to 8 SPD EEPROMs
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3 3/8] i2c: rk3x: Adjust mask/value offset for i2c2 on rv1126
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v6 1/2] dt-bindings: i2c: add bus-reset-gpios property
  • From: "wsa@xxxxxxxxxx" <wsa@xxxxxxxxxx>
• Re: [PATCH v4 0/3] Add atomic transfers to s3c24xx i2c driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v7 1/1] i2c: lpi2c: use clk notifier for rate changes
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 07/13] clk: samsung: gs101: mark PERIC0 IP TOP gate clock as critical
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re: [PATCH] i2c: make i2c_bus_type const
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] i2c: make i2c_bus_type const
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [GIT PULL] at24: updates for v6.8
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v5 00/24] i2c: designware: code consolidation & cleanups
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] i2c: rcar: add support for Gen4 devices
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/3] i2c: create debugfs entry per adapter
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 00/10] Don't let i2c adapters declare I2C_CLASS_SPD support if they support I2C_CLASS_HWMON
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] drm/amd/pm: Remove I2C_CLASS_SPD support
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v5 00/20] remove I2C_CLASS_DDC support
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: i2c-imx: allow bus recovery on non-muxable pads
  • From: esben@xxxxxxxxxx
• Re: [PATCH RFC] eeprom: ee1004: add support for temperature sensor
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v5 00/24] i2c: designware: code consolidation & cleanups
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: i2c: exynos5: add specific compatible for Tesla FSD
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: Re: [PATCH] i2c: i2c-imx: allow bus recovery on non-muxable pads
  • From: Gregor Herburger <gregor.herburger@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: i2c-imx: allow bus recovery on non-muxable pads
  • From: esben@xxxxxxxxxx
• Re: [PATCH v4 2/2] i2c: aspeed: Acknowledge Tx done with and without ACK irq late
  • From: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
• [PATCH] i2c: i2c-imx: allow bus recovery on non-muxable pads
  • From: Gregor Herburger <gregor.herburger@xxxxxxxxxxxxxxx>
• Re: [PATCH RFC] eeprom: ee1004: add support for temperature sensor
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v5 00/24] i2c: designware: code consolidation & cleanups
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] i2c: aspeed: Acknowledge Tx done with and without ACK irq late
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 01/13] dt-bindings: clock: google,gs101: fix CMU_TOP gate clock names
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re: [PATCH v2 00/10] Don't let i2c adapters declare I2C_CLASS_SPD support if they support I2C_CLASS_HWMON
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 03/13] dt-bindings: i2c: exynos5: add google,gs101-hsi2c compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 01/13] dt-bindings: clock: google,gs101: fix CMU_TOP gate clock names
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 01/13] dt-bindings: clock: google,gs101: fix CMU_TOP gate clock names
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 9/9] arm64: dts: st: add i2c2 / i2c8 properties on stm32mp257f-ev1
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• [PATCH v3 8/9] arm64: dts: st: add i2c2/i2c8 pins for stm32mp25
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• [PATCH v3 7/9] arm64: dts: st: add all 8 i2c nodes on stm32mp251
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• [PATCH v3 6/9] i2c: stm32f7: add support for stm32mp25 soc
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• [PATCH v3 5/9] i2c: stm32f7: perform I2C_ISR read once at beginning of event isr
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• [PATCH v3 4/9] dt-bindings: i2c: document st,stm32mp25-i2c compatible
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• [PATCH v3 3/9] i2c: stm32f7: simplify status messages in case of errors
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• [PATCH v3 2/9] i2c: stm32f7: perform most of irq job in threaded handler
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• [PATCH v3 1/9] i2c: stm32f7: use dev_err_probe upon calls of devm_request_irq
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• [PATCH v3 0/9] i2c: stm32f7: enhancements and support for stm32mp25
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• Re: [PATCH v3 0/7] i2c: stm32f7: enhancements and support for stm32mp25
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• [PATCH v3 0/7] i2c: stm32f7: enhancements and support for stm32mp25
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• Re: [PATCH RFC v2] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH RFC v2] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH RFC v2] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH RFC v2] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/7] i2c: stm32f7: add support for stm32mp25 soc
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• Re: [PATCH 01/13] dt-bindings: clock: google,gs101: fix CMU_TOP gate clock names
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re: [PATCH 01/13] dt-bindings: clock: google,gs101: fix CMU_TOP gate clock names
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 11/13] arm64: dts: exynos: gs101: enable eeprom on gs101-oriole
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 10/13] arm64: dts: exynos: gs101: define USI8 with I2C configuration
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 08/13] arm64: dts: exynos: gs101: enable cmu-peric0 clock controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 05/13] tty: serial: samsung: add gs101 earlycon support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 04/13] dt-bindings: serial: samsung: gs101: make reg-io-width required property
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH RFC v2] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH RFC v2] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: Shinichiro Kawasaki <shinichiro.kawasaki@xxxxxxx>
• Re: [PATCH RFC v2] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: Shinichiro Kawasaki <shinichiro.kawasaki@xxxxxxx>
• [PATCH] i2c: smbus: Fixed uninitialized variable msgbuf in i2c_smbus_xfer_emulated
  • From: cuiguoqi <guoqi0226@xxxxxxx>
• Re: [PATCH v2 2/2] i2c: rcar: add FastMode+ support for Gen4
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] i2c: aspeed: Acknowledge Tx done with and without ACK irq late
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v4 1/2] i2c: aspeed: Handle the coalesced stop conditions with the start conditions.
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v4 2/2] i2c: aspeed: Acknowledge Tx done with and without ACK irq late
  • From: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/6] gpiolib: acpi: Modify acpi_dev_irq_wake_get_by to use resource
  • From: Mark Hasemeyer <markhas@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: rcar: add FastMode+ support for Gen4
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2 1/2] i2c: rcar: introduce Gen4 devices
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 07/13] clk: samsung: gs101: mark PERIC0 IP TOP gate clock as critical
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH RFC v2] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 07/13] clk: samsung: gs101: mark PERIC0 IP TOP gate clock as critical
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re: [PATCH 07/13] clk: samsung: gs101: mark PERIC0 IP TOP gate clock as critical
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH 01/13] dt-bindings: clock: google,gs101: fix CMU_TOP gate clock names
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH 07/13] clk: samsung: gs101: mark PERIC0 IP TOP gate clock as critical
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re: [PATCH 11/13] arm64: dts: exynos: gs101: enable eeprom on gs101-oriole
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH 10/13] arm64: dts: exynos: gs101: define USI8 with I2C configuration
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH 09/13] arm64: dts: exynos: gs101: update USI UART to use peric0 clocks
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH 08/13] arm64: dts: exynos: gs101: enable cmu-peric0 clock controller
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH 07/13] clk: samsung: gs101: mark PERIC0 IP TOP gate clock as critical
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH 01/13] dt-bindings: clock: google,gs101: fix CMU_TOP gate clock names
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH 01/13] dt-bindings: clock: google,gs101: fix CMU_TOP gate clock names
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re: [PATCH 04/13] dt-bindings: serial: samsung: gs101: make reg-io-width required property
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH 03/13] dt-bindings: i2c: exynos5: add google,gs101-hsi2c compatible
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH 02/13] dt-bindings: clock: google,gs101-clock: add PERIC0 clock management unit
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH 01/13] dt-bindings: clock: google,gs101: fix CMU_TOP gate clock names
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH 05/13] tty: serial: samsung: add gs101 earlycon support
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re: [PATCH 05/13] tty: serial: samsung: add gs101 earlycon support
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• Re: [PATCH RFC v2] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 12/13] arm64: defconfig: sync with savedefconfig
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re: [PATCH 05/13] tty: serial: samsung: add gs101 earlycon support
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re: [PATCH 13/13] arm64: defconfig: make at24 eeprom builtin
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 12/13] arm64: defconfig: sync with savedefconfig
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 03/13] dt-bindings: i2c: exynos5: add google,gs101-hsi2c compatible
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 12/13] arm64: defconfig: sync with savedefconfig
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• Re: [PATCH 05/13] tty: serial: samsung: add gs101 earlycon support
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• [PATCH 13/13] arm64: defconfig: make at24 eeprom builtin
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH 12/13] arm64: defconfig: sync with savedefconfig
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH 10/13] arm64: dts: exynos: gs101: define USI8 with I2C configuration
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH 11/13] arm64: dts: exynos: gs101: enable eeprom on gs101-oriole
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH 06/13] clk: samsung: gs101: add support for cmu_peric0
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH 09/13] arm64: dts: exynos: gs101: update USI UART to use peric0 clocks
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH 08/13] arm64: dts: exynos: gs101: enable cmu-peric0 clock controller
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH 07/13] clk: samsung: gs101: mark PERIC0 IP TOP gate clock as critical
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH 03/13] dt-bindings: i2c: exynos5: add google,gs101-hsi2c compatible
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH 05/13] tty: serial: samsung: add gs101 earlycon support
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH 04/13] dt-bindings: serial: samsung: gs101: make reg-io-width required property
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH 02/13] dt-bindings: clock: google,gs101-clock: add PERIC0 clock management unit
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH 00/13] GS101 Oriole: CMU_PERIC0 support and USI updates
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH 01/13] dt-bindings: clock: google,gs101: fix CMU_TOP gate clock names
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: rcar: add FastMode+ support for Gen4
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] i2c: rcar: introduce Gen4 devices
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v2 0/2] i2c: rcar: add support for Gen4 devices
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 1/2] i2c: rcar: introduce Gen4 devices
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/2] i2c: rcar: add FastMode+ support for Gen4
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH RFC v2] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: Shinichiro Kawasaki <shinichiro.kawasaki@xxxxxxx>
• Re: [PATCH RFC v2] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v1 1/6] gpiolib: acpi: Modify acpi_dev_irq_wake_get_by to use resource
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/6] gpiolib: acpi: Modify acpi_dev_irq_wake_get_by to use resource
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/6] gpiolib: acpi: Modify acpi_dev_irq_wake_get_by to use resource
  • From: Mark Hasemeyer <markhas@xxxxxxxxxxxx>
• [PATCH v3 0/1] i2c: busses: i2c-mv64xxx: fix arb-loss i2c lock
  • From: Elad Nachman <enachman@xxxxxxxxxxx>
• [PATCH v3 1/1] i2c: busses: i2c-mv64xxx: fix arb-loss i2c lock
  • From: Elad Nachman <enachman@xxxxxxxxxxx>
• Re: [PATCH RFC v2] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/7] dt-bindings: i2c: document st,stm32mp25-i2c compatible
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v8 12/13] ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v8 13/13] ARM: dts: stm32: put ETZPC as an access controller for STM32MP13x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v8 10/13] ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v8 11/13] ARM: dts: stm32: put ETZPC as an access controller for STM32MP15x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v8 08/13] arm64: dts: st: add RIFSC as an access controller for STM32MP25x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v8 09/13] bus: etzpc: introduce ETZPC firewall controller driver
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v8 05/13] firewall: introduce stm32_firewall framework
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v8 07/13] bus: rifsc: introduce RIFSC firewall controller driver
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v8 04/13] dt-bindings: bus: document ETZPC
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v8 06/13] of: property: fw_devlink: Add support for "access-controller"
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v8 02/13] dt-bindings: treewide: add access-controllers description
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v8 03/13] dt-bindings: bus: document RIFSC
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v8 00/13] Introduce STM32 Firewall framework
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v8 01/13] dt-bindings: document generic access controllers
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH RFC v2] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  • From: "Shin'ichiro Kawasaki" <shinichiro.kawasaki@xxxxxxx>
• Re: [PATCH v4 0/2] i2c: aspeed: Late ack Tx done irqs and handle coalesced start with stop conditions
  • From: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 0/2] i2c: aspeed: Late ack Tx done irqs and handle coalesced start with stop conditions
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH v4 2/2] i2c: aspeed: Acknowledge Tx done with and without ACK irq late
  • From: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 00/13] Introduce STM32 Firewall framework
  • From: Gatien CHEVALLIER <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v7 13/13] ARM: dts: stm32: put ETZPC as an access controller for STM32MP13x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v7 12/13] ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v7 10/13] ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v7 11/13] ARM: dts: stm32: put ETZPC as an access controller for STM32MP15x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v7 08/13] arm64: dts: st: add RIFSC as an access controller for STM32MP25x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v7 09/13] bus: etzpc: introduce ETZPC firewall controller driver
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v7 05/13] firewall: introduce stm32_firewall framework
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v7 07/13] bus: rifsc: introduce RIFSC firewall controller driver
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v7 04/13] dt-bindings: bus: document ETZPC
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v7 06/13] of: property: fw_devlink: Add support for "access-controller"
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v7 02/13] dt-bindings: treewide: add access-controllers description
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v7 00/13] Introduce STM32 Firewall framework
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v7 01/13] dt-bindings: document generic access controllers
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v7 03/13] dt-bindings: bus: document RIFSC
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• Re: [PATCH v7 2/2] hwmon: pmbus: Add ltc4286 driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v7 1/2] dt-bindings: hwmon: Add lltc ltc4286 driver bindings
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 24/24] i2c: designware: Fix spelling and other issues in the comments
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 1/1] i2c: busses: i2c-mv64xxx: fix arb-loss i2c lock
  • From: Elad Nachman <enachman@xxxxxxxxxxx>
• [PATCH v3 0/1] i2c: busses: i2c-mv64xxx: fix arb-loss i2c lock
  • From: Elad Nachman <enachman@xxxxxxxxxxx>
• [PATCH v4 2/2] i2c: aspeed: Acknowledge Tx done with and without ACK irq late
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v4 1/2] i2c: aspeed: Handle the coalesced stop conditions with the start conditions.
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v4 0/2] i2c: aspeed: Late ack Tx done irqs and handle coalesced start with stop conditions
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] i2c: aspeed: Handle the coalesced stop conditions with the start conditions.
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] i2c: aspeed: Handle the coalesced stop conditions with the start conditions.
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: aspeed: Acknowledge Tx done with and without ACK irq late
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: aspeed: Acknowledge Tx done with and without ACK irq late
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: aspeed: Acknowledge Tx done with and without ACK irq late
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: cadence: Add system suspend and resume PM support
  • From: Ji Sheng Teoh <jisheng.teoh@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: cadence: Add system suspend and resume PM support
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2] i2c: cadence: Add system suspend and resume PM support
  • From: Ji Sheng Teoh <jisheng.teoh@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: cadence: Add system suspend and resume PM support
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: aspeed: Acknowledge Tx done with and without ACK irq late
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v3 1/2] i2c: aspeed: Handle the coalesced stop conditions with the start conditions.
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH v2] i2c: cadence: Add system suspend and resume PM support
  • From: Ji Sheng Teoh <jisheng.teoh@xxxxxxxxxxxxxxxx>
• Re: [PATCH v1] i2c: cadence: Add system suspend and resume PM support
  • From: Ji Sheng Teoh <jisheng.teoh@xxxxxxxxxxxxxxxx>
• Re: [PATCH v1] i2c: cadence: Add system suspend and resume PM support
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: busses: i2c-mv64xxx: fix arb-loss i2c lock
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: busses: i2c-mv64xxx: fix arb-loss i2c lock
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH v1] i2c: cadence: Add system suspend and resume PM support
  • From: Ji Sheng Teoh <jisheng.teoh@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 24/24] i2c: designware: Fix spelling and other issues in the comments
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v5 07/24] i2c: designware: Add missing 'c' into PCI IDs variable name
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2] i2c: cpm: Remove linux,i2c-index conversion from be32
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2 4/7] i2c: stm32f7: add support for stm32mp25 soc
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2 2/7] i2c: stm32f7: simplify status messages in case of errors
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2 1/7] i2c: stm32f7: perform most of irq job in threaded handler
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH v2 7/7] arm64: dts: st: add i2c2 / i2c8 properties on stm32mp257f-ev1
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• [PATCH v2 6/7] arm64: dts: st: add i2c2/i2c8 pins for stm32mp25
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• [PATCH v2 5/7] arm64: dts: st: add all 8 i2c nodes on stm32mp251
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• [PATCH v2 4/7] i2c: stm32f7: add support for stm32mp25 soc
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• [PATCH v2 3/7] dt-bindings: i2c: document st,stm32mp25-i2c compatible
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• [PATCH v2 2/7] i2c: stm32f7: simplify status messages in case of errors
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• [PATCH v2 1/7] i2c: stm32f7: perform most of irq job in threaded handler
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• [PATCH v2 0/7] i2c: stm32f7: enhancements and support for stm32mp25
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• Re: [RFC PATCH v3 2/5] i2c: of: Introduce component probe function
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2] i2c: rk3x: fix potential spinlock recursion on poll
  • From: Dmitry Osipenko <dmitry.osipenko@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: cpm: Remove linux,i2c-index conversion from be32
  • From: Jochen Friedrich <jochen@xxxxxxxx>
• Re: [PATCH v2] i2c: rk3x: fix potential spinlock recursion on poll
  • From: Jensen Huang <jensenhuang@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: busses: i2c-mv64xxx: fix arb-loss i2c lock
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: aspeed: Acknowledge Tx done with and without ACK irq late
  • From: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] i2c: aspeed: Handle the coalesced stop conditions with the start conditions.
  • From: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 2/2] i2c: aspeed: Acknowledge Tx done with and without ACK irq late
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 1/2] i2c: aspeed: Handle the coalesced stop conditions with the start conditions.
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 0/2] i2c: aspeed: Late ack Tx done irqs and handle coalesced start with stop conditions
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 1/1] i2c: busses: i2c-mv64xxx: fix arb-loss i2c lock
  • From: Elad Nachman <enachman@xxxxxxxxxxx>
• [PATCH v2 0/1] i2c: busses: i2c-mv64xxx: fix arb-loss i2c lock
  • From: Elad Nachman <enachman@xxxxxxxxxxx>
• Re: [PATCH v2] i2c: rk3x: fix potential spinlock recursion on poll
  • From: Dmitry Osipenko <dmitry.osipenko@xxxxxxxxxxxxx>
• [PATCH v5 23/24] i2c: designware: Get rid of redundant 'else'
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 24/24] i2c: designware: Fix spelling and other issues in the comments
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 22/24] i2c: designware: Use temporary variable for struct device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 21/24] i2c: designware: Use pci_get_drvdata()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 19/24] i2c: designware: Uninline i2c_dw_probe()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 20/24] i2c: designware: Propagate firmware node
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 18/24] i2c: designware: Consolidate PM ops
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 16/24] i2c: designware: Move exports to I2C_DW namespaces
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 17/24] i2c: designware: Remove ->disable() callback
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 14/24] i2c: designware: Consolidate firmware parsing and configuring code
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 07/24] i2c: designware: Add missing 'c' into PCI IDs variable name
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 15/24] i2c: designware: Unify the firmware type checks
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 06/24] i2c: designware: Save pointer to semaphore callbacks instead of index
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 09/24] i2c: designware: Unify terminator in device ID tables
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 11/24] i2c: designware: Drop return value from i2c_dw_acpi_configure()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 12/24] i2c: designware: Drop return value from dw_i2c_of_configure()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 08/24] i2c: designware: Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 10/24] i2c: designware: Always provide device ID tables
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 13/24] i2c: designware: Rename dw_i2c_of_configure() -> i2c_dw_of_configure()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 05/24] i2c: designware: Replace a while-loop by for-loop
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 02/24] i2c: designware: Fix reset call order in dw_i2c_plat_probe()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 03/24] i2c: designware: Let PCI core to take care about interrupt vectors
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 04/24] i2c: designware: Fix lock probe call order in dw_i2c_plat_probe()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 01/24] i2c: designware: Fix PM calls order in dw_i2c_plat_probe()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 00/24] i2c: designware: code consolidation & cleanups
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: rk3x: fix potential spinlock recursion on poll
  • From: Dragan Simic <dsimic@xxxxxxxxxxx>
• Re: [PATCH 0/6] dt-bindings: samsung: continued - add specific compatibles for Tesla FSD Hi,
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2] i2c: rk3x: fix potential spinlock recursion on poll
  • From: Jensen Huang <jensenhuang@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: rk3x: fix potential spinlock recursion on poll
  • From: Dragan Simic <dsimic@xxxxxxxxxxx>
• [PATCH v2] i2c: rk3x: fix potential spinlock recursion on poll
  • From: Jensen Huang <jensenhuang@xxxxxxxxxxxxxxx>
• [PATCH v2] i2c: cpm: Remove linux,i2c-index conversion from be32
  • From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
• Re: [PATCH 5/6] dt-bindings: watchdog: samsung: add specific compatible for Tesla FSD
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 4/6] dt-bindings: samsung: exynos-pmu: add specific compatible for Tesla FSD
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 3/6] dt-bindings: serial: samsung: add specific compatible for Tesla FSD
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/6] dt-bindings: pwm: samsung: add specific compatible for Tesla FSD
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: i2c: exynos5: add specific compatible for Tesla FSD
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: fix potential spinlock recursion on poll
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/6] dt-bindings: pwm: samsung: add specific compatible for Tesla FSD
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [RFC PATCH v3 4/5] arm64: dts: mediatek: mt8173-elm-hana: Mark touchscreens and trackpads as fail
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 2/6] dt-bindings: pwm: samsung: add specific compatible for Tesla FSD
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH 3/7] dt-bindings: i2c: document st,stm32mp25-i2c compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: fix potential spinlock recursion on poll
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [RFC PATCH v3 4/5] arm64: dts: mediatek: mt8173-elm-hana: Mark touchscreens and trackpads as fail
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: fix potential spinlock recursion on poll
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• [PATCH] i2c: rk3x: fix potential spinlock recursion on poll
  • From: Jensen Huang <jensenhuang@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 4/5] arm64: dts: mediatek: mt8173-elm-hana: Mark touchscreens and trackpads as fail
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• Re: [PATCH] i2c: cpm: Fix data type
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>