Re: [PATCH v3 1/2] i2c: aspeed: Handle the coalesced stop conditions with the start conditions.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Quan,

On Fri, Dec 08, 2023 at 10:31:41AM +0700, Quan Nguyen wrote:
> Some masters may drive the transfers with low enough latency between
> the nak/stop phase of the current command and the start/address phase
> of the following command that the interrupts are coalesced by the
> time we process them.
> Handle the stop conditions before processing SLAVE_MATCH to fix the
> complaints that sometimes occur below.
> 
> "aspeed-i2c-bus 1e78a040.i2c-bus: irq handled != irq. Expected
> 0x00000086, but was 0x00000084"
> 
> Fixes: f9eb91350bb2 ("i2c: aspeed: added slave support for Aspeed I2C driver")
> Signed-off-by: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>

Reviewed-by: Andi Shyti <andi.shyti@xxxxxxxxxx>

Thanks,
Andi




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux