Use the wrapper function for getting the driver data using pci_dev instead of using dev_get_drvdata() with &pdev->dev, so we can directly pass a struct pci_dev. This is a purely cosmetic change. Reviewed-by: Andi Shyti <andi.shyti@xxxxxxxxxx> Tested-by: Serge Semin <fancer.lancer@xxxxxxxxx> Acked-by: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx> Link: https://lore.kernel.org/r/20231120144641.1660574-22-andriy.shevchenko@xxxxxxxxxxxxxxx Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> --- drivers/i2c/busses/i2c-designware-pcidrv.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c index 2c7bc7dc8e44..211d8279b05e 100644 --- a/drivers/i2c/busses/i2c-designware-pcidrv.c +++ b/drivers/i2c/busses/i2c-designware-pcidrv.c @@ -102,7 +102,7 @@ static u32 mfld_get_clk_rate_khz(struct dw_i2c_dev *dev) static int mfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c) { - struct dw_i2c_dev *dev = dev_get_drvdata(&pdev->dev); + struct dw_i2c_dev *dev = pci_get_drvdata(pdev); switch (pdev->device) { case 0x0817: @@ -152,7 +152,7 @@ static u32 navi_amd_get_clk_rate_khz(struct dw_i2c_dev *dev) static int navi_amd_setup(struct pci_dev *pdev, struct dw_pci_controller *c) { - struct dw_i2c_dev *dev = dev_get_drvdata(&pdev->dev); + struct dw_i2c_dev *dev = pci_get_drvdata(pdev); dev->flags |= MODEL_AMD_NAVI_GPU; dev->timings.bus_freq_hz = I2C_MAX_STANDARD_MODE_FREQ; -- 2.43.0.rc1.1.gbec44491f096
