Re: [PATCH 04/13] dt-bindings: serial: samsung: gs101: make reg-io-width required property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 14/12/2023 11:52, Tudor Ambarus wrote:
> GS101 only allows 32-bit register accesses. When using 8-bit reg
> accesses on gs101, a SError Interrupt is raised causing the system
> unusable.
> 
> Make reg-io-width a required property and expect for it a value of 4.
> 
> Signed-off-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/serial/samsung_uart.yaml | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
> index 133259ed3a34..cc896d7e2a3d 100644
> --- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml
> +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
> @@ -143,6 +143,10 @@ allOf:
>      then:
>        required:
>          - samsung,uart-fifosize
> +        - reg-io-width
> +      properties:
> +        reg-io-width:
> +          const: 4

If all your ports are like this, then I say this is compatible-specific.
Make it here "reg-io-width: false" and set in the driver proper type in
s3c24xx_serial_init_port_default() (or new function).

Although maybe let's first resolve discussion of next patch.

Best regards,
Krzysztof





[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux