We have the same code flows in the PCI and plaform drivers. Moreover, the flow requires the common code to export a few functions. Instead, consolidate that flow under new function called i2c_dw_fw_parse_and_configure() and drop unneeded exports. Reviewed-by: Andi Shyti <andi.shyti@xxxxxxxxxx> Reviewed-by: Mario Limonciello <mario.limonciello@xxxxxxx> Tested-by: Serge Semin <fancer.lancer@xxxxxxxxx> Acked-by: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx> Link: https://lore.kernel.org/r/20231120144641.1660574-15-andriy.shevchenko@xxxxxxxxxxxxxxx Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> --- drivers/i2c/busses/i2c-designware-common.c | 68 +++++++++++++++++++-- drivers/i2c/busses/i2c-designware-core.h | 9 +-- drivers/i2c/busses/i2c-designware-pcidrv.c | 11 +--- drivers/i2c/busses/i2c-designware-platdrv.c | 48 +-------------- 4 files changed, 66 insertions(+), 70 deletions(-) diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c index 7a53a732981b..d3ddfec46200 100644 --- a/drivers/i2c/busses/i2c-designware-common.c +++ b/drivers/i2c/busses/i2c-designware-common.c @@ -20,6 +20,7 @@ #include <linux/io.h> #include <linux/kernel.h> #include <linux/module.h> +#include <linux/of.h> #include <linux/pm_runtime.h> #include <linux/regmap.h> #include <linux/swab.h> @@ -188,7 +189,7 @@ static const u32 supported_speeds[] = { I2C_MAX_STANDARD_MODE_FREQ, }; -int i2c_dw_validate_speed(struct dw_i2c_dev *dev) +static int i2c_dw_validate_speed(struct dw_i2c_dev *dev) { struct i2c_timings *t = &dev->timings; unsigned int i; @@ -208,7 +209,44 @@ int i2c_dw_validate_speed(struct dw_i2c_dev *dev) return -EINVAL; } -EXPORT_SYMBOL_GPL(i2c_dw_validate_speed); + +#ifdef CONFIG_OF + +#include <linux/platform_device.h> + +#define MSCC_ICPU_CFG_TWI_DELAY 0x0 +#define MSCC_ICPU_CFG_TWI_DELAY_ENABLE BIT(0) +#define MSCC_ICPU_CFG_TWI_SPIKE_FILTER 0x4 + +static int mscc_twi_set_sda_hold_time(struct dw_i2c_dev *dev) +{ + writel((dev->sda_hold_time << 1) | MSCC_ICPU_CFG_TWI_DELAY_ENABLE, + dev->ext + MSCC_ICPU_CFG_TWI_DELAY); + + return 0; +} + +static void i2c_dw_of_configure(struct device *device) +{ + struct platform_device *pdev = to_platform_device(device); + struct dw_i2c_dev *dev = dev_get_drvdata(device); + + switch (dev->flags & MODEL_MASK) { + case MODEL_MSCC_OCELOT: + dev->ext = devm_platform_ioremap_resource(pdev, 1); + if (!IS_ERR(dev->ext)) + dev->set_sda_hold_time = mscc_twi_set_sda_hold_time; + break; + default: + break; + } +} + +#else /* CONFIG_OF */ + +static inline void i2c_dw_of_configure(struct device *device) { } + +#endif /* CONFIG_OF */ #ifdef CONFIG_ACPI @@ -255,7 +293,7 @@ static void i2c_dw_acpi_params(struct device *device, char method[], kfree(buf.pointer); } -void i2c_dw_acpi_configure(struct device *device) +static void i2c_dw_acpi_configure(struct device *device) { struct dw_i2c_dev *dev = dev_get_drvdata(device); struct i2c_timings *t = &dev->timings; @@ -286,7 +324,6 @@ void i2c_dw_acpi_configure(struct device *device) break; } } -EXPORT_SYMBOL_GPL(i2c_dw_acpi_configure); static u32 i2c_dw_acpi_round_bus_speed(struct device *device) { @@ -308,11 +345,13 @@ static u32 i2c_dw_acpi_round_bus_speed(struct device *device) #else /* CONFIG_ACPI */ +static inline void i2c_dw_acpi_configure(struct device *device) { } + static inline u32 i2c_dw_acpi_round_bus_speed(struct device *device) { return 0; } #endif /* CONFIG_ACPI */ -void i2c_dw_adjust_bus_speed(struct dw_i2c_dev *dev) +static void i2c_dw_adjust_bus_speed(struct dw_i2c_dev *dev) { u32 acpi_speed = i2c_dw_acpi_round_bus_speed(dev->dev); struct i2c_timings *t = &dev->timings; @@ -328,7 +367,24 @@ void i2c_dw_adjust_bus_speed(struct dw_i2c_dev *dev) else t->bus_freq_hz = I2C_MAX_FAST_MODE_FREQ; } -EXPORT_SYMBOL_GPL(i2c_dw_adjust_bus_speed); + +int i2c_dw_fw_parse_and_configure(struct dw_i2c_dev *dev) +{ + struct i2c_timings *t = &dev->timings; + struct device *device = dev->dev; + + i2c_parse_fw_timings(device, t, false); + + i2c_dw_adjust_bus_speed(dev); + + if (device->of_node) + i2c_dw_of_configure(device); + if (has_acpi_companion(device)) + i2c_dw_acpi_configure(device); + + return i2c_dw_validate_speed(dev); +} +EXPORT_SYMBOL_GPL(i2c_dw_fw_parse_and_configure); u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset) { diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index b7884f15e0e9..22477143bb98 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -395,11 +395,4 @@ int i2c_dw_baytrail_probe_lock_support(struct dw_i2c_dev *dev); int i2c_dw_amdpsp_probe_lock_support(struct dw_i2c_dev *dev); #endif -int i2c_dw_validate_speed(struct dw_i2c_dev *dev); -void i2c_dw_adjust_bus_speed(struct dw_i2c_dev *dev); - -#if IS_ENABLED(CONFIG_ACPI) -void i2c_dw_acpi_configure(struct device *device); -#else -static inline void i2c_dw_acpi_configure(struct device *device) { } -#endif +int i2c_dw_fw_parse_and_configure(struct dw_i2c_dev *dev); diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c index cf736a8b9023..7556e9cbf8d2 100644 --- a/drivers/i2c/busses/i2c-designware-pcidrv.c +++ b/drivers/i2c/busses/i2c-designware-pcidrv.c @@ -253,7 +253,6 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev, int r; struct dw_pci_controller *controller; struct dw_scl_sda_cfg *cfg; - struct i2c_timings *t; if (id->driver_data >= ARRAY_SIZE(dw_pci_controllers)) return dev_err_probe(&pdev->dev, -EINVAL, @@ -288,9 +287,6 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev, dev->irq = pci_irq_vector(pdev, 0); dev->flags |= controller->flags; - t = &dev->timings; - i2c_parse_fw_timings(&pdev->dev, t, false); - pci_set_drvdata(pdev, dev); if (controller->setup) { @@ -299,12 +295,7 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev, return r; } - i2c_dw_adjust_bus_speed(dev); - - if (has_acpi_companion(&pdev->dev)) - i2c_dw_acpi_configure(&pdev->dev); - - r = i2c_dw_validate_speed(dev); + r = i2c_dw_fw_parse_and_configure(dev); if (r) return r; diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index b8606b651feb..b275a1b19eec 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -21,7 +21,6 @@ #include <linux/kernel.h> #include <linux/mfd/syscon.h> #include <linux/module.h> -#include <linux/of.h> #include <linux/platform_device.h> #include <linux/pm.h> #include <linux/pm_runtime.h> @@ -97,43 +96,11 @@ static int bt1_i2c_request_regs(struct dw_i2c_dev *dev) dev->map = devm_regmap_init(dev->dev, NULL, dev, &bt1_i2c_cfg); return PTR_ERR_OR_ZERO(dev->map); } - -#define MSCC_ICPU_CFG_TWI_DELAY 0x0 -#define MSCC_ICPU_CFG_TWI_DELAY_ENABLE BIT(0) -#define MSCC_ICPU_CFG_TWI_SPIKE_FILTER 0x4 - -static int mscc_twi_set_sda_hold_time(struct dw_i2c_dev *dev) -{ - writel((dev->sda_hold_time << 1) | MSCC_ICPU_CFG_TWI_DELAY_ENABLE, - dev->ext + MSCC_ICPU_CFG_TWI_DELAY); - - return 0; -} - -static void i2c_dw_of_configure(struct device *device) -{ - struct platform_device *pdev = to_platform_device(device); - struct dw_i2c_dev *dev = dev_get_drvdata(device); - - switch (dev->flags & MODEL_MASK) { - case MODEL_MSCC_OCELOT: - dev->ext = devm_platform_ioremap_resource(pdev, 1); - if (!IS_ERR(dev->ext)) - dev->set_sda_hold_time = mscc_twi_set_sda_hold_time; - break; - default: - break; - } -} #else static int bt1_i2c_request_regs(struct dw_i2c_dev *dev) { return -ENODEV; } - -static inline void i2c_dw_of_configure(struct device *device) -{ -} #endif static int txgbe_i2c_request_regs(struct dw_i2c_dev *dev) @@ -274,7 +241,6 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) { struct i2c_adapter *adap; struct dw_i2c_dev *dev; - struct i2c_timings *t; int irq, ret; irq = platform_get_irq(pdev, 0); @@ -301,18 +267,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) if (ret) return ret; - t = &dev->timings; - i2c_parse_fw_timings(&pdev->dev, t, false); - - i2c_dw_adjust_bus_speed(dev); - - if (pdev->dev.of_node) - i2c_dw_of_configure(&pdev->dev); - - if (has_acpi_companion(&pdev->dev)) - i2c_dw_acpi_configure(&pdev->dev); - - ret = i2c_dw_validate_speed(dev); + ret = i2c_dw_fw_parse_and_configure(dev); if (ret) return ret; @@ -336,6 +291,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) return ret; if (dev->clk) { + struct i2c_timings *t = &dev->timings; u64 clk_khz; dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz; -- 2.43.0.rc1.1.gbec44491f096
