[PATCH] i2c: rk3x: fix potential spinlock recursion on poll

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Possible deadlock scenario (on reboot):
rk3x_i2c_xfer_common(polling)
    -> rk3x_i2c_wait_xfer_poll()
        -> rk3x_i2c_irq(0, i2c);
            --> spin_lock(&i2c->lock);
            ...
        <rk3x i2c interrupt>
        -> rk3x_i2c_irq(0, i2c);
            --> spin_lock(&i2c->lock); (deadlock here)

Store the IRQ number and disable/enable it around the polling transfer.
This patch has been tested on NanoPC-T4.

Signed-off-by: Jensen Huang <jensenhuang@xxxxxxxxxxxxxxx>
---
 drivers/i2c/busses/i2c-rk3x.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index a044ca0c35a1..94514637c3bd 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -200,6 +200,7 @@ struct rk3x_i2c {
 	struct clk *clk;
 	struct clk *pclk;
 	struct notifier_block clk_rate_nb;
+	int irq;
 
 	/* Settings */
 	struct i2c_timings t;
@@ -1087,13 +1088,18 @@ static int rk3x_i2c_xfer_common(struct i2c_adapter *adap,
 
 		spin_unlock_irqrestore(&i2c->lock, flags);
 
-		rk3x_i2c_start(i2c);
-
 		if (!polling) {
+			rk3x_i2c_start(i2c);
+
 			timeout = wait_event_timeout(i2c->wait, !i2c->busy,
 						     msecs_to_jiffies(WAIT_TIMEOUT));
 		} else {
+			disable_irq(i2c->irq);
+			rk3x_i2c_start(i2c);
+
 			timeout = rk3x_i2c_wait_xfer_poll(i2c);
+
+			enable_irq(i2c->irq);
 		}
 
 		spin_lock_irqsave(&i2c->lock, flags);
@@ -1310,6 +1316,8 @@ static int rk3x_i2c_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	i2c->irq = irq;
+
 	platform_set_drvdata(pdev, i2c);
 
 	if (i2c->soc_data->calc_timings == rk3x_i2c_v0_calc_timings) {
-- 
2.42.0





[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux