PCI core, after pcim_enable_device(), takes care about the allocated IRQ vectors, no need to do it explicitly and break the cleaning up order. Reviewed-by: Andi Shyti <andi.shyti@xxxxxxxxxx> Tested-by: Serge Semin <fancer.lancer@xxxxxxxxx> Acked-by: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx> Link: https://lore.kernel.org/r/20231120144641.1660574-4-andriy.shevchenko@xxxxxxxxxxxxxxx Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> --- drivers/i2c/busses/i2c-designware-pcidrv.c | 14 +++----------- 1 file changed, 3 insertions(+), 11 deletions(-) diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c index 61d7a27aa070..e67956845c19 100644 --- a/drivers/i2c/busses/i2c-designware-pcidrv.c +++ b/drivers/i2c/busses/i2c-designware-pcidrv.c @@ -295,10 +295,8 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev, if (controller->setup) { r = controller->setup(pdev, controller); - if (r) { - pci_free_irq_vectors(pdev); + if (r) return r; - } } i2c_dw_adjust_bus_speed(dev); @@ -307,10 +305,8 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev, i2c_dw_acpi_configure(&pdev->dev); r = i2c_dw_validate_speed(dev); - if (r) { - pci_free_irq_vectors(pdev); + if (r) return r; - } i2c_dw_configure(dev); @@ -330,10 +326,8 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev, adap->nr = controller->bus_num; r = i2c_dw_probe(dev); - if (r) { - pci_free_irq_vectors(pdev); + if (r) return r; - } if ((dev->flags & MODEL_MASK) == MODEL_AMD_NAVI_GPU) { dev->slave = i2c_new_ccgx_ucsi(&dev->adapter, dev->irq, &dgpu_node); @@ -359,8 +353,6 @@ static void i2c_dw_pci_remove(struct pci_dev *pdev) pm_runtime_get_noresume(&pdev->dev); i2c_del_adapter(&dev->adapter); - devm_free_irq(&pdev->dev, dev->irq, dev); - pci_free_irq_vectors(pdev); } static const struct pci_device_id i2_designware_pci_ids[] = { -- 2.43.0.rc1.1.gbec44491f096
