Re: [PATCH 2/2] i2c: i801: Add 0x29 as I²C address for lis3lv02d in Dell XPS 15 7590

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Paul,

On Wed, Dec 20, 2023 at 05:10:02PM +0100, Paul Menzel wrote:
> On the Dell XPS 15 7590/0VYV0G, BIOS 1.24.0 09/11/2023, Linux prints the
> warning below.
> 
>     i801_smbus 0000:00:1f.4: Accelerometer lis3lv02d is present on SMBus but its address is unknown, skipping registration
> 
> Following the same suggestions by Wolfram Sang as for the Dell Precision
> 3540 [1], the accelerometer can be successfully found on I²C bus 2 at
> address 0x29.
> 
>     $ echo lis3lv02d 0x29 | sudo tee /sys/bus/i2c/devices/i2c-2/new_device
>     lis3lv02d 0x29
>     $ dmesg | tail -5
>     [  549.522876] lis3lv02d_i2c 2-0029: supply Vdd not found, using dummy regulator
>     [  549.522904] lis3lv02d_i2c 2-0029: supply Vdd_IO not found, using dummy regulator
>     [  549.542486] lis3lv02d: 8 bits 3DC sensor found
>     [  549.630022] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input35
>     [  549.630586] i2c i2c-2: new_device: Instantiated device lis3lv02d at 0x29
> 
> So, the device has that accelerometer. Add the I²C address to the
> mapping list, and test it successfully on the device.
> 
> [1]: https://lore.kernel.org/linux-i2c/97708c11-ac85-fb62-2c8e-d37739ca826f@xxxxxxxxxxxxx/
> 
> Signed-off-by: Paul Menzel <pmenzel@xxxxxxxxxxxxx>

Reviewed-by: Andi Shyti <andi.shyti@xxxxxxxxxx>

Thanks,
Andi




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux