Linux ARM MSM

• Thread Index

• Re: [PATCH] arm64: dts: qcom: pm8916: add temp-alarm thermal zone
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: pm8916: add temp-alarm thermal zone
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] drm/msm/adreno: fix a7xx gpu init
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v1 2/3] drm/msm/adreno: Add support for X185 GPU
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 4/6] drm/msm/a7xx: Initialize a750 "software fuse"
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH RFT v3 1/5] dt-bindings: media: camss: Add qcom,sc7180-camss
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH RFT v3 1/5] dt-bindings: media: camss: Add qcom,sc7180-camss
  • From: george chan <gchan9527@xxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: arm: qcom: add sa8775p-ride Rev 3
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH RFT v3 1/5] dt-bindings: media: camss: Add qcom,sc7180-camss
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH RFT v3 1/5] dt-bindings: media: camss: Add qcom,sc7180-camss
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] drm/msm/adreno: fix a7xx gpu init
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH RFT v3 1/5] dt-bindings: media: camss: Add qcom,sc7180-camss
  • From: george chan <gchan9527@xxxxxxxxx>
• Re: [PATCH v1 2/3] drm/msm/adreno: Add support for X185 GPU
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• Re: [PATCH v4 8/8] serial: qcom-geni: Rework TX in FIFO mode to fix hangs/lockups
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH RFT v3 1/5] dt-bindings: media: camss: Add qcom,sc7180-camss
  • From: george chan <gchan9527@xxxxxxxxx>
• Re: [PATCH] dt-bindings: mtd: qcom,nandc: Define properties at top-level
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 3/3] serial: qcom-geni: fix garbage output after buffer flush
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 1/2] drm/msm/adreno: De-spaghettify the use of memory barriers
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH 2/3] serial: qcom-geni: fix soft lockup on sw flow control and suspend
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH] drm/msm/adreno: fix a7xx gpu init
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v1 2/3] drm/msm/adreno: Add support for X185 GPU
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• [PATCH] media: qcom: camss: Remove unused phy_sel variable in csid gen2
  • From: Gjorgji Rosikopulos <quic_grosikop@xxxxxxxxxxx>
• Re: [PATCH v1 1/3] dt-bindings: display/msm/gmu: Add Adreno X185 GMU
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• Re: [PATCH 2/3] serial: qcom-geni: fix soft lockup on sw flow control and suspend
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 2/3] net: stmmac: Add interconnect support
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: net: qcom: ethernet: Add interconnect properties
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v6 1/2] clk: qcom: gcc-ipq6018: update sdcc max clock frequency
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [PATCH RFT v3 1/5] dt-bindings: media: camss: Add qcom,sc7180-camss
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH RFT v3 1/5] dt-bindings: media: camss: Add qcom,sc7180-camss
  • From: george chan <gchan9527@xxxxxxxxx>
• Re: [PATCH] dt-bindings: display/msm/gmu: fix the schema being not applied
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH RFT v3 1/5] dt-bindings: media: camss: Add qcom,sc7180-camss
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 3/3] coresight: dummy: Add reserve atid support for dummy source
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• [PATCH v3 2/3] coresight: Add support to get preferred id for system trace sources
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• [PATCH v3 1/3] dt-bindings: arm: Add arm,trace-id for coresight dummy source
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• [PATCH v3 0/3] coresight: Add preferred trace id support
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• Re: [PATCH RFT v3 5/5] arm64: dts: qcom: sc7180: camss: Add CAMSS block definition
  • From: george chan <gchan9527@xxxxxxxxx>
• Re: [PATCH RFT v3 0/5] Add sc7180 camss subsys support
  • From: george chan <gchan9527@xxxxxxxxx>
• Re: [PATCH RFT v3 1/5] dt-bindings: media: camss: Add qcom,sc7180-camss
  • From: george chan <gchan9527@xxxxxxxxx>
• [PATCH v2] bus: mhi: host: pci_generic: Use unique 'mhi_pci_dev_info' for product families
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v11 0/6] Add interconnect driver for IPQ9574 SoC
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH 0/3] ASoC: codecs: lpass-wsa-macro: Add support for newer v2.5 version
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/2] ASoC: codecs: lpass-macro: Use enum for handling codec version
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/2] ASoC: codecs: lpass-macro: Gracefully handle unknown version
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: display/msm/gmu: fix the schema being not applied
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH V3] arm64: dts: qcom: x1e80100: Add fastrpc nodes
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH V3 0/4] arm64: dts: qcom: x1e80100: Enable bwmon support
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH v5 0/4] Add support for QoS configuration
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH V4 0/8] Add support for videocc and camcc on SM8650
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v2 0/3] ARM: dts: qcom: msm8926-motorola-peregrine: Update device tree of Motorola Moto G 4G (2013)
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: pm8916: add temp-alarm thermal zone
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm6115: add resets for sdhc_1
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH v6 0/2] arm64: dts: qcom: ipq6018: add sdhci node
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 7/7] arm64: dts: qcom: add OnePlus 8T (kebab)
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• [PATCH v1] Coresight: Set correct cs_mode for dummy source to fix disable issue
  • From: Jie Gan <quic_jiegan@xxxxxxxxxxx>
• [PATCH v2] Coresight: Set correct cs_mode for TPDM to fix disable issue
  • From: Jie Gan <quic_jiegan@xxxxxxxxxxx>
• Re: [PATCH v6 1/2] clk: qcom: gcc-ipq6018: update sdcc max clock frequency
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: i2c: qcom-cci: Document sm8550 compatible
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 2/2] Coresight: Set correct cs_mode for dummy source to fix disable issue
  • From: JieGan <quic_jiegan@xxxxxxxxxxx>
• Re: [PATCH V6 2/5] mailbox: Add support for QTI CPUCP mailbox controller
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 1/2] Coresight: Set correct cs_mode for TPDM to fix disable issue
  • From: JieGan <quic_jiegan@xxxxxxxxxxx>
• [PATCH] platform: arm64: lenovo-yoga-c630: select AUXILIARY_BUS
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH RFC 0/5] mm/gup: Introduce exclusive GUP pinning
  • From: Vishal Annapurve <vannapurve@xxxxxxxxxx>
• [PATCH 2/2] Coresight: Set correct cs_mode for dummy source to fix disable issue
  • From: Jie Gan <quic_jiegan@xxxxxxxxxxx>
• [PATCH 1/2] Coresight: Set correct cs_mode for TPDM to fix disable issue
  • From: Jie Gan <quic_jiegan@xxxxxxxxxxx>
• Re: [PATCH] Coresight: Set correct cs_mode for TPDM to fix disable issue
  • From: JieGan <quic_jiegan@xxxxxxxxxxx>
• Re: [PATCH RFT v3 5/5] arm64: dts: qcom: sc7180: camss: Add CAMSS block definition
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v2 2/3] net: stmmac: Add interconnect support
  • From: Sagar Cheluvegowda <quic_scheluve@xxxxxxxxxxx>
• [PATCH v2 0/3] Add interconnect support for stmmac driver.
  • From: Sagar Cheluvegowda <quic_scheluve@xxxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: net: qcom: ethernet: Add interconnect properties
  • From: Sagar Cheluvegowda <quic_scheluve@xxxxxxxxxxx>
• [PATCH v2 3/3] net: stmmac: Bring down the clocks to lower frequencies when mac link goes down
  • From: Sagar Cheluvegowda <quic_scheluve@xxxxxxxxxxx>
• Re: [PATCH RFT v3 5/5] arm64: dts: qcom: sc7180: camss: Add CAMSS block definition
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH RFT v3 0/5] Add sc7180 camss subsys support
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH RFT v3 4/5] media: qcom: camss: Add sc7180 resources
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH RFT v3 3/5] media: qcom: camss: Add sc7180 support
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH RFT v3 2/5] media: camss: csiphy-3ph: Add Gen2 v1.2.2 two-phase MIPI CSI-2 DPHY init
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH RFT v3 1/5] dt-bindings: media: camss: Add qcom,sc7180-camss
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: display/msm/gmu: fix the schema being not applied
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] dt-bindings: mtd: qcom,nandc: Define properties at top-level
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: pm8916: add temp-alarm thermal zone
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 2/2] Revert "drm/msm/a6xx: Poll for GBIF unhalt status in hw_init"
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH] drm/msm/a6xx: request memory region
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: x1e80100-qcp: add audio support
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH RFC v3] drm/msm/dpu: Configure DP INTF/PHY selector
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v2 0/2] Clean up barriers
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• [PATCH RFC v3] drm/msm/dpu: Configure DP INTF/PHY selector
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] drm/msm/a6xx: request memory region
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• Re: [PATCH RFC v2] drm/msm/dpu: Configure DP INTF/PHY selector
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH RFC v2] drm/msm/dpu: Configure DP INTF/PHY selector
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/2] Revert "drm/msm/a6xx: Poll for GBIF unhalt status in hw_init"
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: pm8916: add temp-alarm thermal zone
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] ASoC: codecs: lpass-rx-macro: add missing handling of v2.1 codec
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 3/4] remoteproc: qcom_q6v5_pas: Add support to attach a DSP
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH RFC v2] drm/msm/dpu: Configure DP INTF/PHY selector
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH RFC v2] drm/msm/dpu: Configure DP INTF/PHY selector
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• [PATCH v2 2/2] Revert "drm/msm/a6xx: Poll for GBIF unhalt status in hw_init"
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 1/2] drm/msm/adreno: De-spaghettify the use of memory barriers
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 0/2] Clean up barriers
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v4 5/5] arm64: dts: qcom: sm8550: Wire up GPU speed bin & more OPPs
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v4 4/5] drm/msm/adreno: Redo the speedbin assignment
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v4 3/5] drm/msm/adreno: Define A530 speed bins explicitly
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v4 2/5] drm/msm/adreno: Add speedbin data for SM8550 / A740
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v4 1/5] drm/msm/adreno: Implement SMEM-based speed bin
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v4 0/5] Add SMEM-based speedbin matching
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] drm/msm/adreno: De-spaghettify the use of memory barriers
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/a6xx: request memory region
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH] drm/msm/adreno: De-spaghettify the use of memory barriers
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/a6xx: request memory region
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• Re: [PATCH v2 4/7] drm/msm/adreno: Add speedbin data for SM8550 / A740
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 3/7] drm/msm/adreno: Implement SMEM-based speed bin
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 4/7] drm/msm/adreno: Add speedbin data for SM8550 / A740
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v2 3/7] drm/msm/adreno: Implement SMEM-based speed bin
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH V4 5/7] clk: qcom: Add NSS clock Controller driver for IPQ9574
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 3/3] ASoC: codecs: lpass-wsa-macro: Correct support for newer v2.5 version
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/3] ASoC: codecs: lpass-wsa-macro: Prepare to accommodate new codec versions
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/3] ASoC: codecs: lpass-wsa-macro: Drop unused define
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 0/3] ASoC: codecs: lpass-wsa-macro: Add support for newer v2.5 version
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 0/4] dt-bindings: display/msm/gpu: few cleanups
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 2/2] ASoC: codecs: lpass-macro: Use enum for handling codec version
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/2] ASoC: codecs: lpass-macro: Gracefully handle unknown version
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH RFT v3 0/5] Add sc7180 camss subsys support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2] scsi: ufs: qcom: add missing MODULE_DESCRIPTION() macro
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• Re: [PATCH] ASoC: codecs: lpass-rx-macro: add missing handling of v2.1 codec
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: (subset) [PATCH v9 0/5] soc: qcom: add in-kernel pd-mapper implementation
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 1/3] serial: qcom-geni: fix hard lockup on buffer flush
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH] serial: qcom-geni: Avoid hard lockup if bytes are dropped
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] ASoC: codecs: lpass-rx-macro: add missing handling of v2.1 codec
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH] ASoC: codecs: lpass-rx-macro: add missing handling of v2.1 codec
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 1/2] iommu/io-pgtable-arm: Add way to debug pgtable walk
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v2 0/3] arm64: dts: qcom: sa8775p-ride: support both board variants
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 2/3] arm64: dts: qcom: move common parts for sa8775p-ride variants into a .dtsi
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 3/3] arm64: dts: qcom: sa8775p-ride-r3: add new board file
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 1/3] dt-bindings: arm: qcom: add sa8775p-ride Rev 3
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 0/3] arm64: dts: qcom: sa8775p-ride: support both board variants
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 0/4] MSM8937 MDP/DSI PHY enablement
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] drm/msm/mdp5: Remove MDP_CAP_SRC_SPLIT from msm8x53_config
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3] drm/msm/dpu: remove CRTC frame event callback registration
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/3] serial: qcom-geni: fix hard lockup on buffer flush
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 1/3] serial: qcom-geni: fix hard lockup on buffer flush
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: CC dri-devel list on Qualcomm FastRPC patches
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH V4 5/7] clk: qcom: Add NSS clock Controller driver for IPQ9574
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH] drm/msm: log iommu init failure
  • From: Brian Masney <bmasney@xxxxxxxxxx>
• Re: [PATCH v4 8/8] serial: qcom-geni: Rework TX in FIFO mode to fix hangs/lockups
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 0/2] iio: frequency: add iio support for Amlogic clock measure
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• Re: [PATCH V3 2/4] dt-bindings: interconnect: qcom,msm8998-bwmon: Add X1E80100 BWMON instances
  • From: Georgi Djakov <djakov@xxxxxxxxxx>
• Re: [PATCH V3 1/4] dt-bindings: interconnect: qcom,msm8998-bwmon: Remove opp-table from the required list
  • From: Georgi Djakov <djakov@xxxxxxxxxx>
• Re: [PATCH v5 4/4] arm64: dts: qcom: sc7280: Add clocks for QOS configuration
  • From: Georgi Djakov <djakov@xxxxxxxxxx>
• Subscribe
  • From: Neha Giri <neharajendra.giri@xxxxxxxxx>
• Re: [PATCH 0/2] iio: frequency: add iio support for Amlogic clock measure
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v8 5/7] arm64: dts: qcom: sdm845: Add DT nodes for the TBUs
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v8 5/7] arm64: dts: qcom: sdm845: Add DT nodes for the TBUs
  • From: Georgi Djakov <djakov@xxxxxxxxxx>
• Re: [linux-next:master] BUILD REGRESSION f76698bd9a8ca01d3581236082d786e9a6b72bb7
  • From: Philip Li <philip.li@xxxxxxxxx>
• Re: [PATCH] Coresight: Set correct cs_mode for TPDM to fix disable issue
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH v4 19/40] iommu: optimize subsystem by using atomic find_bit() API
  • From: Joerg Roedel <joro@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: iommu: qcom,iommu: Add MSM8953 GPU IOMMU to SMMUv2 compatibles
  • From: Joerg Roedel <joro@xxxxxxxxxx>
• Re: [PATCH v4 1/2] iommu/io-pgtable-arm: Add way to debug pgtable walk
  • From: Will Deacon <will@xxxxxxxxxx>
• Re: [PATCH v4 8/8] serial: qcom-geni: Rework TX in FIFO mode to fix hangs/lockups
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 0/2] iio: frequency: add iio support for Amlogic clock measure
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• Re: [PATCH 0/2] iio: frequency: add iio support for Amlogic clock measure
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: Re: Re: Re: [PATCH v2 1/2] bus: mhi: host: Import mux_id item
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v4 6/8] media: qcom: camss: Split testgen, RDI and RX for CSID 170
  • From: "Gjorgji Rosikopulos (Consultant)" <quic_grosikop@xxxxxxxxxxx>
• Re: [PATCH v4 7/8] serial: qcom-geni: Fix suspend while active UART xfer
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH V4 4/7] dt-bindings: clock: Add ipq9574 NSSCC clock and reset definitions
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v5 04/15] soc: qcom: ice: add hwkm support in ice
  • From: "neil.armstrong@xxxxxxxxxx" <neil.armstrong@xxxxxxxxxx>
• Re: Lockdep broken on x1e80100
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v8 5/7] arm64: dts: qcom: sdm845: Add DT nodes for the TBUs
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: Re: Re: [PATCH v2 1/2] bus: mhi: host: Import mux_id item
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH] bus: mhi: host: pci_generic: Use unique 'mhi_pci_dev_info' for product families
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: Lockdep broken on x1e80100 (was: Re: [PATCH v5 0/7] sm8550: Add support for eUSB2 repeater)
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH v9 4/8] remoteproc: qcom: Add ssr subdevice identifier
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH V4 5/7] clk: qcom: Add NSS clock Controller driver for IPQ9574
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH V4 4/7] dt-bindings: clock: Add ipq9574 NSSCC clock and reset definitions
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH V4 0/7] Add NSS clock controller support for IPQ9574
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH V4 7/7] arm64: defconfig: Build NSS Clock Controller driver for IPQ9574
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH V4 1/7] clk: qcom: clk-alpha-pll: Add NSS HUAYRA ALPHA PLL support for ipq9574
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH V4 3/7] clk: qcom: gcc-ipq9574: Add support for gpll0_out_aux clock
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH V4 6/7] arm64: dts: qcom: ipq9574: Add support for nsscc node
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH V4 2/7] dt-bindings: clock: gcc-ipq9574: Add definition for GPLL0_OUT_AUX
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• Re: [PATCH v9 4/8] remoteproc: qcom: Add ssr subdevice identifier
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Lockdep broken on x1e80100 (was: Re: [PATCH v5 0/7] sm8550: Add support for eUSB2 repeater)
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 v4 2/2] pinctrl: qcom: Introduce SM4250 LPI pinctrl driver
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2] soc: qcom: icc-bwmon: Add tracepoints in bwmon_intr_thread
  • From: Shivnandan Kumar <quic_kshivnan@xxxxxxxxxxx>
• Re: [PATCH V3 1/4] dt-bindings: interconnect: qcom,msm8998-bwmon: Remove opp-table from the required list
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v9 2/8] remoteproc: qcom: Add secure PIL support
  • From: Gokul Sriram P <quic_gokulsri@xxxxxxxxxxx>
• Re: [PATCH v9 1/8] remoteproc: qcom: Add PRNG proxy clock
  • From: Gokul Sriram P <quic_gokulsri@xxxxxxxxxxx>
• RE: [PATCH v5 04/15] soc: qcom: ice: add hwkm support in ice
  • From: "Gaurav Kashyap (QUIC)" <quic_gaurkash@xxxxxxxxxxx>
• [PATCH v2] pmdomain: qcom: rpmhpd: Skip retention level for Power Domains
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• Re: [PATCH v9 1/8] remoteproc: qcom: Add PRNG proxy clock
  • From: Gokul Sriram P <quic_gokulsri@xxxxxxxxxxx>
• Re: (subset) [PATCH v9 0/5] soc: qcom: add in-kernel pd-mapper implementation
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] firmware: qcom: tzmem: export devm_qcom_tzmem_pool_new()
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• [PATCH] Coresight: Set correct cs_mode for TPDM to fix disable issue
  • From: Jie Gan <quic_jiegan@xxxxxxxxxxx>
• Re: [PATCH RFC v2] drm/msm/dpu: Configure DP INTF/PHY selector
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v9 1/5] soc: qcom: pdr: protect locator_addr with the main mutex
  • From: Chris Lew <quic_clew@xxxxxxxxxxx>
• Re: [PATCH v3] drm/msm/dpu: remove CRTC frame event callback registration
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• [PATCH v3] drm/msm/dpu: remove CRTC frame event callback registration
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/3] serial: qcom-geni: fix garbage output after buffer flush
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 2/3] serial: qcom-geni: fix soft lockup on sw flow control and suspend
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] drm/msm: log iommu init failure
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH RFC 0/5] mm/gup: Introduce exclusive GUP pinning
  • From: David Rientjes <rientjes@xxxxxxxxxx>
• Re: [PATCH v2 v4 2/2] pinctrl: qcom: Introduce SM4250 LPI pinctrl driver
  • From: Alexey Klimov <alexey.klimov@xxxxxxxxxx>
• [PATCH v5 1/3] dt-bindings: leds: Add Silergy SY7802 flash LED
  • From: André Apitzsch via B4 Relay <devnull+git.apitzsch.eu@xxxxxxxxxx>
• [PATCH v5 2/3] leds: sy7802: Add support for Silergy SY7802 flash LED controller
  • From: André Apitzsch via B4 Relay <devnull+git.apitzsch.eu@xxxxxxxxxx>
• [PATCH v5 3/3] arm64: dts: qcom: msm8939-longcheer-l9100: Add rear flash
  • From: André Apitzsch via B4 Relay <devnull+git.apitzsch.eu@xxxxxxxxxx>
• [PATCH v5 0/3] Add sy7802 flash led driver
  • From: André Apitzsch via B4 Relay <devnull+git.apitzsch.eu@xxxxxxxxxx>
• Re: [PATCH 2/3] serial: qcom-geni: fix soft lockup on sw flow control and suspend
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v4 8/8] serial: qcom-geni: Rework TX in FIFO mode to fix hangs/lockups
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v5 16/16] drm/msm/dpu: sync mode_config limits to the FB limits in dpu_plane.c
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 15/16] drm/msm/dpu: merge MAX_IMG_WIDTH/HEIGHT with DPU_MAX_IMG_WIDTH/HEIGHT
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 14/16] drm/msm/dpu: check for the plane pitch overflow
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 11/16] drm/msm/dpu: split dpu_format_populate_layout
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 12/16] drm/msm/dpu: make dpu_format_populate_addrs return void
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 13/16] drm/msm/dpu: move layout setup population out of dpu_plane_prepare_fb()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 10/16] drm/msm/dpu: move pitch check to _dpu_format_get_plane_sizes_linear()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 09/16] drm/msm/dpu: pass drm_framebuffer to _dpu_format_get_plane_sizes()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 07/16] drm/msm/dpu: drop extra aspace checks in dpu_formats
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 08/16] drm/msm/dpu: drop msm_format from struct dpu_hw_fmt_layout
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 06/16] drm/msm/dpu: drop dpu_format_populate_layout from dpu_plane_sspp_atomic_update
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 04/16] drm/msm/dpu: check for overflow in _dpu_crtc_setup_lm_bounds()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 05/16] drm/msm/dpu: drop dpu_format_check_modified_format
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 03/16] drm/msm/dpu: move CRTC resource assignment to dpu_encoder_virt_atomic_mode_set
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 02/16] drm/msm/dpu: fix error condition in dpu_encoder_virt_atomic_mode_set
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 00/16] drm/msm/dpu: be more friendly to X.org
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 01/16] drm/msm/dpu: cleanup FB if dpu_format_populate_layout fails
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] firmware: qcom: tzmem: export devm_qcom_tzmem_pool_new()
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [PATCH v4 7/8] serial: qcom-geni: Fix suspend while active UART xfer
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 1/3] serial: qcom-geni: fix hard lockup on buffer flush
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 3/7] dt-bindings: arm: qcom: add OnePlus 8 series
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] firmware: qcom: tzmem: export devm_qcom_tzmem_pool_new()
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [linux-next:master] BUILD REGRESSION f76698bd9a8ca01d3581236082d786e9a6b72bb7
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• [PATCH] firmware: qcom: tzmem: export devm_qcom_tzmem_pool_new()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH RFC 0/5] mm/gup: Introduce exclusive GUP pinning
  • From: Sean Christopherson <seanjc@xxxxxxxxxx>
• Re: [PATCH] drm/msm: log iommu init failure
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] drm/msm: log iommu init failure
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v9 1/2] platform/arm64: build drivers even on non-ARM64 platforms
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/3] serial: qcom-geni: fix hard lockup on buffer flush
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v1] PCI: qcom: Avoid DBI and ATU register space mirror to BAR/MMIO region
  • From: Mayank Rana <quic_mrana@xxxxxxxxxxx>
• Re: [PATCH v4 7/8] serial: qcom-geni: Fix suspend while active UART xfer
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [GIT PULL RESEND] Immutable branch between pdx86 lenovo c630 branch, power/supply and USB
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/4] dt-bindings: display/msm/gpu: few cleanups
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: x1e80100-qcp: add audio support
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [GIT PULL RESEND] Immutable branch between pdx86 lenovo c630 branch, power/supply and USB
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v9 1/2] platform/arm64: build drivers even on non-ARM64 platforms
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• [GIT PULL RESEND] Immutable branch between pdx86 lenovo c630 branch, power/supply and USB
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• branch between pdx86 lenovo c630 branch, power/supply and USB
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 3/4] firmware: psci: Read and use vendor reset types
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• Re: [PATCH v5 3/4] firmware: psci: Read and use vendor reset types
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• Re: [PATCH v4 1/2] iommu/io-pgtable-arm: Add way to debug pgtable walk
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v9 0/2] pwrseq: introduce the subsystem and first driver
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• Re: [PATCH v2 0/3] arm64: dts: qcom: x1e80100: Add soundwire controller resets
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 1/2] iommu/io-pgtable-arm: Add way to debug pgtable walk
  • From: Will Deacon <will@xxxxxxxxxx>
• Re: [PATCH 1/2] drm/msm/adreno: allow headless setup on SM8150 MTP
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v8] usb: typec: ucsi: add Lenovo Yoga C630 glue driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v9 2/2] usb: typec: ucsi: add Lenovo Yoga C630 glue driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v9 1/2] platform/arm64: build drivers even on non-ARM64 platforms
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v9 0/2] usb: typec: ucsi: enable Lenovo Yoga C630 EC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] firmware: qcom_scm: Add a padded page to ensure DMA memory from lower 4GB
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• Re: [PATCH RFT v3 0/5] Add sc7180 camss subsys support
  • From: george chan <gchan9527@xxxxxxxxx>
• [PATCH v4 16/16] drm/msm/dpu: sync mode_config limits to the FB limits in dpu_plane.c
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 14/16] drm/msm/dpu: check for the plane pitch overflow
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 12/16] drm/msm/dpu: make dpu_format_populate_addrs return void
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 13/16] drm/msm/dpu: move layout setup population out of dpu_plane_prepare_fb()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 15/16] drm/msm/dpu: merge MAX_IMG_WIDTH/HEIGHT with DPU_MAX_IMG_WIDTH/HEIGHT
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 11/16] drm/msm/dpu: split dpu_format_populate_layout
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 10/16] drm/msm/dpu: move pitch check to _dpu_format_get_plane_sizes_linear()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 09/16] drm/msm/dpu: pass drm_framebuffer to _dpu_format_get_plane_sizes()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 08/16] drm/msm/dpu: drop msm_format from struct dpu_hw_fmt_layout
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 05/16] drm/msm/dpu: drop dpu_format_check_modified_format
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 07/16] drm/msm/dpu: drop extra aspace checks in dpu_formats
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 06/16] drm/msm/dpu: drop dpu_format_populate_layout from dpu_plane_sspp_atomic_update
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 04/16] drm/msm/dpu: check for overflow in _dpu_crtc_setup_lm_bounds()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 03/16] drm/msm/dpu: move CRTC resource assignment to dpu_encoder_virt_atomic_mode_set
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 00/16] drm/msm/dpu: be more friendly to X.org
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 02/16] drm/msm/dpu: fix error condition in dpu_encoder_virt_atomic_mode_set
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 01/16] drm/msm/dpu: cleanup FB if dpu_format_populate_layout fails
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v8] usb: typec: ucsi: add Lenovo Yoga C630 glue driver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: qcom: x1e80100: add soundwire controller resets
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: clock: Add x1e80100 LPASSCC reset controller
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: clock: Add x1e80100 LPASS AUDIOCC reset controller
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v8] usb: typec: ucsi: add Lenovo Yoga C630 glue driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1 2/3] drm/msm/adreno: Add support for X185 GPU
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v1 2/3] drm/msm/adreno: Add support for X185 GPU
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v8] usb: typec: ucsi: add Lenovo Yoga C630 glue driver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] drm/msm/adreno: allow headless setup on SM8150 MTP
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] drm/msm/adreno: allow headless setup on SM8150 MTP
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm6115: add resets for sdhc_1
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: qcom: x1e80100: add soundwire controller resets
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v1 3/3] arm64: dts: qcom: x1e80100: Add gpu support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v1 2/3] drm/msm/adreno: Add support for X185 GPU
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH RFT v3 0/5] Add sc7180 camss subsys support
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v2 2/3] dt-bindings: clock: Add x1e80100 LPASSCC reset controller
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 3/3] arm64: dts: qcom: x1e80100: add soundwire controller resets
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: clock: Add x1e80100 LPASS AUDIOCC reset controller
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 0/3] arm64: dts: qcom: x1e80100: Add soundwire controller resets
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 1/3] serial: qcom-geni: fix hard lockup on buffer flush
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH 2/3] serial: qcom-geni: fix soft lockup on sw flow control and suspend
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH 3/3] serial: qcom-geni: fix garbage output after buffer flush
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH 0/3] serial: qcom-geni: fix lockups
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH RFC net-next v2 13/17] net: stmmac: Move internal PCS ANE-control method to dwmac-qcom-ethqos.c
  • From: Serge Semin <fancer.lancer@xxxxxxxxx>
• [PATCH RFC net-next v2 10/17] net: stmmac: Introduce internal PCS offset-based CSR access
  • From: Serge Semin <fancer.lancer@xxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: sm8350: move usb-role-switch to sm8350.dtsi
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/3] arm64: dts: qcom: sm8650: move usb-role-switch to sm8650.dtsi
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: prefer host mode on dev boards
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/2] ASoC: codecs:lpass-wsa-macro: Fix logic of enabling vi channels
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 8/8] serial: qcom-geni: Rework TX in FIFO mode to fix hangs/lockups
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 2/2] ASoC: codecs:lpass-wsa-macro: Fix logic of enabling vi channels
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: prefer host mode on dev boards
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: prefer host mode on dev boards
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH 3/3] arm64: dts: qcom: prefer host mode on dev boards
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: prefer host mode on dev boards
  • From: neil.armstrong@xxxxxxxxxx
• [PATCH 3/3] arm64: dts: qcom: prefer host mode on dev boards
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH 2/3] arm64: dts: qcom: sm8350: move usb-role-switch to sm8350.dtsi
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH 1/3] arm64: dts: qcom: sm8650: move usb-role-switch to sm8650.dtsi
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH 0/3] arm64: dts: qcom: make dev boards prefer usb host mode
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm6115: add resets for sdhc_1
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH RFT v3 5/5] arm64: dts: qcom: sc7180: camss: Add CAMSS block definition
  • From: George Chan via B4 Relay <devnull+gchan9527.gmail.com@xxxxxxxxxx>
• [PATCH RFT v3 4/5] media: qcom: camss: Add sc7180 resources
  • From: George Chan via B4 Relay <devnull+gchan9527.gmail.com@xxxxxxxxxx>
• [PATCH RFT v3 3/5] media: qcom: camss: Add sc7180 support
  • From: George Chan via B4 Relay <devnull+gchan9527.gmail.com@xxxxxxxxxx>
• [PATCH RFT v3 0/5] Add sc7180 camss subsys support
  • From: George Chan via B4 Relay <devnull+gchan9527.gmail.com@xxxxxxxxxx>
• [PATCH RFT v3 1/5] dt-bindings: media: camss: Add qcom,sc7180-camss
  • From: George Chan via B4 Relay <devnull+gchan9527.gmail.com@xxxxxxxxxx>
• [PATCH RFT v3 2/5] media: camss: csiphy-3ph: Add Gen2 v1.2.2 two-phase MIPI CSI-2 DPHY init
  • From: George Chan via B4 Relay <devnull+gchan9527.gmail.com@xxxxxxxxxx>
• Re: [PATCH v4 7/8] serial: qcom-geni: Fix suspend while active UART xfer
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sm6115: add resets for sdhc_1
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• Re: [PATCH v2 0/8] Add sc7180 camss subsys support
  • From: george chan <gchan9527@xxxxxxxxx>
• Re: [PATCH 0/3] arm64: dts: qcom: x1e80100: Add soundwire controller resets
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH 0/7] qcom: initial support for the OnePlus 8T
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 0/7] qcom: initial support for the OnePlus 8T
  • From: Caleb Connolly <caleb@xxxxxxxxxxxxxxxx>
• Re: [PATCH 0/3] arm64: dts: qcom: x1e80100: Add soundwire controller resets
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 3/5] arm64: dts: qcom: sdx75: update reserved memory regions for mpss
  • From: Naina Mehta <quic_nainmeht@xxxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: x1e80100: add soundwire controller resets
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v4 2/3] leds: sy7802: Add support for Silergy SY7802 flash LED controller
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: icc-bwmon: Add tracepoints in bwmon_intr_thread
  • From: Shivnandan Kumar <quic_kshivnan@xxxxxxxxxxx>
• Re: [PATCH 0/3] arm64: dts: qcom: x1e80100: Add soundwire controller resets
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: x1e80100: add soundwire controller resets
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 0/3] arm64: dts: qcom: x1e80100: Add soundwire controller resets
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 3/3] arm64: dts: qcom: x1e80100: add soundwire controller resets
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 2/3] dt-bindings: clock: Add x1e80100 LPASSCC reset controller
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 0/3] arm64: dts: qcom: x1e80100: Add soundwire controller resets
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 1/3] dt-bindings: clock: Add x1e80100 LPASS AUDIOCC reset controller
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v1 0/3] Support for Adreno X1-85 GPU
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 6/8] Add debug log info to msm_csid_subdev_init function
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 7/8] Add debug log info to vfe block init and set clock rate
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 6/8] Add debug log info to msm_csid_subdev_init function
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 5/8] Add debug log info to camss_enable_clocks function
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 0/8] Add sc7180 camss subsys support
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH V3] arm64: dts: qcom: x1e80100: Add fastrpc nodes
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• Re: [PATCH V2] arm64: dts: qcom: x1e80100: Add fastrpc nodes
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• Re: [PATCH V3 3/4] soc: qcom: icc-bwmon: Allow for interrupts to be shared across instances
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1] misc: fastrpc: Move fastrpc driver to misc/fastrpc/
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH v1] misc: fastrpc: Move fastrpc driver to misc/fastrpc/
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH v2 3/3] clk: qcom: dispcc-sm8650: Update the GDSC flags
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 1/3] clk: qcom: dispcc-sm8650: Park RCG's clk source at XO during disable
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH V3 4/4] arm64: dts: qcom: x1e80100: Add BWMONs
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH V3 3/4] soc: qcom: icc-bwmon: Allow for interrupts to be shared across instances
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH V3 2/4] dt-bindings: interconnect: qcom,msm8998-bwmon: Add X1E80100 BWMON instances
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH V3 1/4] dt-bindings: interconnect: qcom,msm8998-bwmon: Remove opp-table from the required list
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH V3 0/4] arm64: dts: qcom: x1e80100: Enable bwmon support
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• Re: [PATCH V2 2/3] soc: qcom: icc-bwmon: Allow for interrupts to be shared across instances
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• Re: [PATCH V2 1/3] dt-bindings: interconnect: qcom,msm8998-bwmon: Add X1E80100 BWMON instances
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• Re: [PATCH V2 2/3] soc: qcom: icc-bwmon: Allow for interrupts to be shared across instances
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• Re: [PATCH V2 3/3] arm64: dts: qcom: x1e80100: Add BWMONs
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH] MAINTAINERS: CC dri-devel list on Qualcomm FastRPC patches
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 3/3] clk: qcom: dispcc-sm8650: Update the GDSC flags
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 2/3] clk: qcom: dispcc-sm8650: add missing CLK_SET_RATE_PARENT flag
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 1/3] clk: qcom: dispcc-sm8650: Park RCG's clk source at XO during disable
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 0/3] clk: qcom: dispcc-sm8650: round of fixes
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v2 0/7] Enable CPR for IPQ9574
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1] misc: fastrpc: Move fastrpc driver to misc/fastrpc/
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 5/5] clk: qcom: dispcc-sm8650: Update the GDSC wait_val fields and flags
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 3/5] clk: qcom: dispcc-sm8650: drop TCXO from table when using rcg2_shared_ops
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 1/5] clk: qcom: dispcc-sm8650: Park RCG's clk source at XO during disable
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 6/7] Input: touchscreen: add Synaptics TCM oncell S3908
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 2/7] dt-bindings: input: touchscreen: document synaptics TCM oncell
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2 0/7] Enable CPR for IPQ9574
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH v1 0/3] Support for Adreno X1-85 GPU
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• Re: [PATCH v2 0/7] Enable CPR for IPQ9574
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 6/7] soc: qcom: cpr3: Add IPQ9574 definitions
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 5/7] clk: qcom: gcc-ipq9574: Add CPR clock definition
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 3/7] pmdomain: qcom: rpmpd: Add IPQ9574 power domains
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 5/7] drm/panel: add driver for samsung amb655x
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 4/7] drm: mipi: add mipi_dsi_generic_write_multi_type()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 0/7] qcom: initial support for the OnePlus 8T
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 4/7] dt-bindings: clock: Add CPR clock defines for IPQ9574
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v1 3/7] pmdomain: qcom: rpmpd: Add IPQ9574 power domains
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v2 7/7] dts: arm64: qcom: ipq9574: Enable CPR
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v2 6/7] soc: qcom: cpr3: Add IPQ9574 definitions
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v2 5/7] clk: qcom: gcc-ipq9574: Add CPR clock definition
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v2 4/7] dt-bindings: clock: Add CPR clock defines for IPQ9574
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v2 3/7] pmdomain: qcom: rpmpd: Add IPQ9574 power domains
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v2 2/7] dt-bindings: soc: qcom: cpr3: Add bindings for IPQ9574
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v2 1/7] dt-bindings: power: rpmpd: Add IPQ9574 power domains
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v2 0/7] Enable CPR for IPQ9574
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH RFT v2 8/8] Add support for sc7180 camss subsys
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/8] Add qcom,sc7180-camss
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 0/8] Add sc7180 camss subsys support
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 3/7] dt-bindings: arm: qcom: add OnePlus 8 series
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH V7 5/5] venus: pm_helpers: Use dev_pm_genpd_set_hwmode to switch GDSC mode on V6
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH V7 4/5] clk: qcom: videocc: Use HW_CTRL_TRIGGER for SM8250, SC7280 vcodec GDSC's
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH V7 3/5] clk: qcom: gdsc: Add set and get hwmode callbacks to switch GDSC mode
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH V7 2/5] PM: domains: Add the domain HW-managed mode to the summary
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH V7 1/5] PM: domains: Allow devices attached to genpd to be managed by HW
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH V7 0/5] Add control for switching back and forth to HW control
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: phy: qcom,qmp-usb: fix spelling error
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4 8/8] arm64: dts: qcom: ipq9574: add PCIe2 and PCIe3 nodes
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v4 3/8] dt-bindings: PCI: qcom: Add IPQ9574 PCIe controller
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v4 5/8] PCI: qcom: Add support for IPQ9574
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v4 4/8] PCI: qcom: Switch to devm_clk_bulk_get_all() API to get the clocks from Devicetree
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• RE: [PATCH 01/22] dt-bindings: thermal: samsung,exynos: specify cells
  • From: "Alim Akhtar" <alim.akhtar@xxxxxxxxxxx>
• Re: [PATCH 2/7] dt-bindings: input: touchscreen: document synaptics TCM oncell
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v10 3/4] arm64: dts: qcom: add base AIM300 dtsi
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH v2] dt-bindings: phy: qcom,qmp-usb: fix spelling error
  • From: YijieYang <quic_yijiyang@xxxxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: panel: document Samsung AMB655X
  • From: Caleb Connolly <caleb@xxxxxxxxxxxxxxxx>
• [PATCH 7/7] arm64: dts: qcom: add OnePlus 8T (kebab)
  • From: Caleb Connolly <caleb@xxxxxxxxxxxxxxxx>
• [PATCH 6/7] Input: touchscreen: add Synaptics TCM oncell S3908
  • From: Caleb Connolly <caleb@xxxxxxxxxxxxxxxx>
• [PATCH 5/7] drm/panel: add driver for samsung amb655x
  • From: Caleb Connolly <caleb@xxxxxxxxxxxxxxxx>
• [PATCH 4/7] drm: mipi: add mipi_dsi_generic_write_multi_type()
  • From: Caleb Connolly <caleb@xxxxxxxxxxxxxxxx>
• [PATCH 3/7] dt-bindings: arm: qcom: add OnePlus 8 series
  • From: Caleb Connolly <caleb@xxxxxxxxxxxxxxxx>
• [PATCH 2/7] dt-bindings: input: touchscreen: document synaptics TCM oncell
  • From: Caleb Connolly <caleb@xxxxxxxxxxxxxxxx>
• [PATCH 1/7] dt-bindings: panel: document Samsung AMB655X
  • From: Caleb Connolly <caleb@xxxxxxxxxxxxxxxx>
• [PATCH 0/7] qcom: initial support for the OnePlus 8T
  • From: Caleb Connolly <caleb@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] firmware: qcom_scm: Add a padded page to ensure DMA memory from lower 4GB
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v4 8/8] arm64: dts: qcom: ipq9574: add PCIe2 and PCIe3 nodes
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v2 0/6] Update GCC, GPUCC clock drivers on SA8775P
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 5/6] media: qcom: camss: Add sc7180 resources
  • From: george chan <gchan9527@xxxxxxxxx>
• Re: [PATCH 3/6] media: qcom: camss: csiphy-3ph: Add Gen2 v1.2.2 two-phase MIPI CSI-2 DPHY init
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v2 6/8] Add debug log info to msm_csid_subdev_init function
  • From: George Chan via B4 Relay <devnull+gchan9527.gmail.com@xxxxxxxxxx>
• [PATCH RFT v2 8/8] Add support for sc7180 camss subsys
  • From: George Chan via B4 Relay <devnull+gchan9527.gmail.com@xxxxxxxxxx>
• [PATCH v2 5/8] Add debug log info to camss_enable_clocks function
  • From: George Chan via B4 Relay <devnull+gchan9527.gmail.com@xxxxxxxxxx>
• [PATCH v2 7/8] Add debug log info to vfe block init and set clock rate
  • From: George Chan via B4 Relay <devnull+gchan9527.gmail.com@xxxxxxxxxx>
• [PATCH v2 4/8] Add sc7180 resources
  • From: George Chan via B4 Relay <devnull+gchan9527.gmail.com@xxxxxxxxxx>
• [PATCH v2 2/8] Add Gen2 v1.2.2 two-phase MIPI CSI-2 DPHY init
  • From: George Chan via B4 Relay <devnull+gchan9527.gmail.com@xxxxxxxxxx>
• [PATCH v2 3/8] Add sc7180 support
  • From: George Chan via B4 Relay <devnull+gchan9527.gmail.com@xxxxxxxxxx>
• [PATCH v2 0/8] Add sc7180 camss subsys support
  • From: George Chan via B4 Relay <devnull+gchan9527.gmail.com@xxxxxxxxxx>
• [PATCH v2 1/8] Add qcom,sc7180-camss
  • From: George Chan via B4 Relay <devnull+gchan9527.gmail.com@xxxxxxxxxx>
• Re: [PATCH 3/6] media: qcom: camss: csiphy-3ph: Add Gen2 v1.2.2 two-phase MIPI CSI-2 DPHY init
  • From: george chan <gchan9527@xxxxxxxxx>
• [PATCH] drm/msm/mdp5: Remove MDP_CAP_SRC_SPLIT from msm8x53_config
  • From: Barnabás Czémán <trabarni@xxxxxxxxx>
• Re: [PATCH 5/6] media: qcom: camss: Add sc7180 resources
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 3/6] media: qcom: camss: csiphy-3ph: Add Gen2 v1.2.2 two-phase MIPI CSI-2 DPHY init
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: (subset) [PATCH v10 00/15] firmware: qcom: implement support for and enable SHM bridge
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 5/6] media: qcom: camss: Add sc7180 resources
  • From: george chan <gchan9527@xxxxxxxxx>
• Re: [PATCH 1/6] media: dt-bindings: media: camss: Add qcom,sc7180-camss binding
  • From: george chan <gchan9527@xxxxxxxxx>
• Re: [PATCH 3/6] media: qcom: camss: csiphy-3ph: Add Gen2 v1.2.2 two-phase MIPI CSI-2 DPHY init
  • From: george chan <gchan9527@xxxxxxxxx>
• Re: [PATCH] ARM: dts: qcom: use generic node names for Adreno and QFPROM
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/4] drm/msm/mdp5: Add MDP5 configuration for MSM8937
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1 0/3] Support for Adreno X1-85 GPU
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1 3/3] arm64: dts: qcom: x1e80100: Add gpu support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1 2/3] drm/msm/adreno: Add support for X185 GPU
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/4] drm/msm/mdp5: Add MDP5 configuration for MSM8937
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: (subset) [PATCH v2 0/3] Add Sony Xperia Z3 Compact smartphone
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] clk: qcom: gpucc-sm8350: Park RCG's clk source at XO during disable
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 0/2] Add PM8008 regulator support for Fairphone 4 & 5
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH 0/5] Use mboxes in smsm node for all dtsi where possible
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: msm8916-gplus-fl8005a: Add BMS
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: qcom: use generic node names for Adreno and QFPROM
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v3] arm64: dts: qcom: x1e80100: Enable tsens and thermal zone nodes
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v1 3/3] arm64: dts: qcom: x1e80100: Add gpu support
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• Re: [PATCH v1 3/3] arm64: dts: qcom: x1e80100: Add gpu support
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• [PATCH v2 4/4] drm/msm/dsi: Add phy configuration for MSM8937
  • From: Barnabás Czémán <trabarni@xxxxxxxxx>
• [PATCH v2 3/4] dt-bindings: msm: dsi-phy-28nm: Document msm8937 compatible
  • From: Barnabás Czémán <trabarni@xxxxxxxxx>
• [PATCH v2 2/4] drm/msm/mdp5: Add MDP5 configuration for MSM8937
  • From: Barnabás Czémán <trabarni@xxxxxxxxx>
• [PATCH v2 1/4] dt-bindings: display/msm: qcom, mdp5: Add msm8937 compatible
  • From: Barnabás Czémán <trabarni@xxxxxxxxx>
• [PATCH v2 0/4] MSM8937 MDP/DSI PHY enablement
  • From: Barnabás Czémán <trabarni@xxxxxxxxx>
• Re: [PATCH v1] misc: fastrpc: Move fastrpc driver to misc/fastrpc/
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v1 3/3] arm64: dts: qcom: x1e80100: Add gpu support
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 4/4] dt-bindings: display/msm/gpu: fix the schema being not applied
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 3/4] dt-bindings: display/msm/gpu: simplify compatible regex
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 2/4] dt-bindings: display/msm/gpu: define reg-names in top-level
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 1/4] dt-bindings: display/msm/gpu: constrain clocks in top-level
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 0/4] dt-bindings: display/msm/gpu: few cleanups
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: sm8150-mtp: drop incorrect amd,imageon
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/2] drm/msm/adreno: allow headless setup on SM8150 MTP
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 00/23] ASoC: codecs: wcd family: cleanups
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 0/4] ASoC: qcom: display port changes
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: (subset) [PATCH 0/6] ASoC: Few constifications (mostly arguments)
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 3/3] dt-bindings: display/msm/gpu: constrain reg/reg-names per variant
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v14 3/4] PCI: Bring the PCIe speed to MBps logic to new pcie_link_speed_to_mbps()
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 3/3] arm64: dts: qcom: x1e80100: Add gpu support
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: display/msm/gpu: constrain clocks in top-level
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: display/msm/gpu: define reg-names in top-level
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 3/3] dt-bindings: display/msm/gpu: constrain reg/reg-names per variant
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: Re: [PATCH v2 1/2] bus: mhi: host: Import mux_id item
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH] dt-bindings: display/msm/gmu: fix the schema being not applied
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 3/3] arm64: dts: qcom: x1e80100: Add gpu support
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v1 1/3] dt-bindings: display/msm/gmu: Add Adreno X185 GMU
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v1 3/3] arm64: dts: qcom: x1e80100: Add gpu support
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• [PATCH] ARM: dts: qcom: use generic node names for Adreno and QFPROM
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 3/3] dt-bindings: display/msm/gpu: constrain reg/reg-names per variant
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/3] dt-bindings: display/msm/gpu: define reg-names in top-level
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/3] dt-bindings: display/msm/gpu: constrain clocks in top-level
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 3/3] arm64: dts: qcom: x1e80100: Add gpu support
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 3/6] media: qcom: camss: csiphy-3ph: Add Gen2 v1.2.2 two-phase MIPI CSI-2 DPHY init
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v1 1/3] dt-bindings: display/msm/gmu: Add Adreno X185 GMU
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v1 0/3] Support for Adreno X1-85 GPU
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/6] media: dt-bindings: media: camss: Add qcom,sc7180-camss binding
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v1 2/3] drm/msm/adreno: Add support for X185 GPU
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• [PATCH v1 3/3] arm64: dts: qcom: x1e80100: Add gpu support
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• [PATCH v1 1/3] dt-bindings: display/msm/gmu: Add Adreno X185 GMU
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• [PATCH v1 0/3] Support for Adreno X1-85 GPU
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: arm: qcom: Add msm8916 based LG devices
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/4] drm/msm/mdp5: Add MDP5 configuration for MSM8937
  • From: Barnabás Czémán <trabarni@xxxxxxxxx>
• [PATCH 0/3] Introduce msm8916 based LG devices
  • From: Nikita Travkin <nikita@xxxxxxx>
• [PATCH 1/3] dt-bindings: arm: qcom: Add msm8916 based LG devices
  • From: Nikita Travkin <nikita@xxxxxxx>
• [PATCH 2/3] arm64: dts: qcom: msm8916-lg-m216: Add initial device tree
  • From: Nikita Travkin <nikita@xxxxxxx>
• [PATCH 3/3] arm64: dts: qcom: msm8916-lg-c50: add initial dts for LG Leon LTE
  • From: Nikita Travkin <nikita@xxxxxxx>
• Re: [PATCH 3/4] dt-bindings: msm: dsi-phy-28nm: Document msm8937 compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: display/msm: qcom, mdp5: Add msm8937 compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: guard ctl irq callback register/unregister
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3] drm/msm/dpu: drop validity checks for clear_pending_flush() ctl op
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 0/2] Remove more useless wrappers
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v6 0/6] Add DSC support to DSI video panel
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 0/9] drm/msm: make use of the HDMI connector infrastructure
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 0/8] drm/msm/dpu: handle non-default TE source pins
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 0/4] Add MDSS and DPU support for QCOM SM7150 SoC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 4/4] drm/msm/dsi: Add phy configuration for MSM8937
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/4] drm/msm/mdp5: Add MDP5 configuration for MSM8937
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 4/4] drm/msm/dsi: Add phy configuration for MSM8937
  • From: Barnabás Czémán <trabarni@xxxxxxxxx>
• [PATCH 3/4] dt-bindings: msm: dsi-phy-28nm: Document msm8937 compatible
  • From: Barnabás Czémán <trabarni@xxxxxxxxx>
• [PATCH 2/4] drm/msm/mdp5: Add MDP5 configuration for MSM8937
  • From: Barnabás Czémán <trabarni@xxxxxxxxx>
• [PATCH 1/4] dt-bindings: display/msm: qcom, mdp5: Add msm8937 compatible
  • From: Barnabás Czémán <trabarni@xxxxxxxxx>
• [PATCH 0/4] MSM8937 MDP/DSI PHY enablement
  • From: Barnabás Czémán <trabarni@xxxxxxxxx>
• [linux-next:master] BUILD REGRESSION f76698bd9a8ca01d3581236082d786e9a6b72bb7
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v5] drm/display: split DSC helpers from DP helpers
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 13/13] drm/msm/hdmi: wire in hpd_enable/hpd_disable bridge ops
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 12/13] drm/msm/hdmi: ensure that HDMI is up if HPD is requested
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 11/13] drm/msm/hdmi: drop hpd-gpios support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 10/13] drm/msm/hdmi: expand the HDMI_CFG macro
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 09/13] drm/msm/hdmi: rename hpd_clks to pwr_clks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 08/13] drm/msm/hdmi: implement proper runtime PM handling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 07/13] drm/msm/hdmi: add runtime PM calls to DDC transfer function
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 06/13] drm/msm/hdmi: switch to pm_runtime_resume_and_get()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 05/13] drm/msm/hdmi: switch to clk_bulk API
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 04/13] drm/msm/hdmi: drop clock frequency assignment
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 03/13] drm/msm/hdmi: simplify extp clock handling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 02/13] drm/msm/hdmi: move the alt_iface clock to the hpd list
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 01/13] drm/msm/hdmi: program HDMI timings during atomic_pre_enable
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 00/13] drm/msm/hdmi: rework and fix the HPD even generation
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 v4 2/2] pinctrl: qcom: Introduce SM4250 LPI pinctrl driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 0/2] pinctrl: qcom: add sm4250 lpi pinctrl
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 00/41] iio: simplify with regmap_set_bits(), regmap_clear_bits()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 v4 1/2] dt-bindings: pinctrl: qcom: Add SM4250 pinctrl
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v1] PCI: qcom: Avoid DBI and ATU register space mirror to BAR/MMIO region
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• [PATCH v2 v4 2/2] pinctrl: qcom: Introduce SM4250 LPI pinctrl driver
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v4 0/2] pinctrl: qcom: add sm4250 lpi pinctrl
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 v4 1/2] dt-bindings: pinctrl: qcom: Add SM4250 pinctrl
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH 1/6] media: dt-bindings: media: camss: Add qcom,sc7180-camss binding
  • From: george chan <gchan9527@xxxxxxxxx>
• Re: [PATCH 1/6] media: dt-bindings: media: camss: Add qcom,sc7180-camss binding
  • From: george chan <gchan9527@xxxxxxxxx>
• Re: [PATCH v6 1/2] clk: qcom: gcc-ipq6018: update sdcc max clock frequency
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [PATCH 3/6] media: qcom: camss: csiphy-3ph: Add Gen2 v1.2.2 two-phase MIPI CSI-2 DPHY init
  • From: george chan <gchan9527@xxxxxxxxx>
• Re: [PATCH v2 5/8] drm/msm/dpu: rework vsync_source handling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: arm: qcom: Add Sony Xperia Z3 Compact
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v4 2/3] leds: sy7802: Add support for Silergy SY7802 flash LED controller
  • From: André Apitzsch <git@xxxxxxxxxxx>
• Re: [PATCH v2] drm/msm/adreno: Add A306A support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 7/7] ARM: dts: qcom: msm8226: Convert APCS usages to mbox interface
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 6/7] ARM: dts: qcom: msm8226: Hook up CPU cooling
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3] drm/msm/dpu: drop validity checks for clear_pending_flush() ctl op
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 5/7] ARM: dts: qcom: msm8226: Add CPU frequency scaling support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 2/4] drm/msm/dpu: Add SM7150 support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: guard ctl irq callback register/unregister
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] drm/msm/adreno: Add A306A support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3] arm64: dts: qcom: x1e80100: Enable tsens and thermal zone nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 5/5] clk: qcom: dispcc-sm8650: Update the GDSC wait_val fields and flags
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 3/3] ARM: dts: qcom: msm8974-sony-shinano: increase load on l21 for sdhc2
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/6] media: qcom: camss: csiphy-3ph: Add Gen2 v1.2.2 two-phase MIPI CSI-2 DPHY init
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 5/6] media: qcom: camss: Add sc7180 resources
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 2/3] ARM: dts: qcom: Add Sony Xperia Z3 Compact smartphone
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v10 3/4] arm64: dts: qcom: add base AIM300 dtsi
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: msm8916-gplus-fl8005a: Add BMS
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 0/2] arm64: dts: qcom: sa8775p-ride: support both board variants
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/5] clk: qcom: dispcc-sm8650: drop TCXO from table when using rcg2_shared_ops
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 02/41] iio: accel: kxsd9: Make use of regmap_clear_bits()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH RFC v3 0/9] dt-bindings: hwinfo: Introduce board-id
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [no subject]
  • From: Unknown
• Re: [PATCH v1] PCI: qcom: Avoid DBI and ATU register space mirror to BAR/MMIO region
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v1] PCI: qcom: Avoid DBI and ATU register space mirror to BAR/MMIO region
  • From: Prudhvi Yarlagadda <quic_pyarlaga@xxxxxxxxxxx>
• Re: [RFC PATCH 1/4] drm/msm: register a fault handler for display mmu faults
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [RFC PATCH 1/4] drm/msm: register a fault handler for display mmu faults
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v3 12/23] mfd: Add new driver for MAX77705 PMIC
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [RFC PATCH 1/4] drm/msm: register a fault handler for display mmu faults
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [RFC PATCH 1/4] drm/msm: register a fault handler for display mmu faults
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH RFC v3 0/9] dt-bindings: hwinfo: Introduce board-id
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v9 3/5] soc: qcom: pdr: extract PDR message marshalling data
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v9 5/5] remoteproc: qcom: enable in-kernel PD mapper
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v9 4/5] soc: qcom: add pd-mapper implementation
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v9 1/5] soc: qcom: pdr: protect locator_addr with the main mutex
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v9 2/5] soc: qcom: pdr: fix parsing of domains lists
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v9 0/5] soc: qcom: add in-kernel pd-mapper implementation
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 04/15] soc: qcom: ice: add hwkm support in ice
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• Re: [PATCH v2 0/3] Add Sony Xperia Z3 Compact smartphone
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 5/5] clk: qcom: dispcc-sm8650: Update the GDSC wait_val fields and flags
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 4/5] clk: qcom: dispcc-sm8650: add missing CLK_SET_RATE_PARENT flag
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] clk: qcom: gpucc-sm8350: Park RCG's clk source at XO during disable
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/5] clk: qcom: dispcc-sm8650: use correct clk ops for dptx1_aux_clk_src
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v9 7/8] clk: qcom: Add WCSSAON reset
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v9 0/8] remoteproc: qcom: q6v5-wcss: Add support for secure pil
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v9 4/8] remoteproc: qcom: Add ssr subdevice identifier
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v9 0/8] remoteproc: qcom: q6v5-wcss: Add support for secure pil
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v9 2/8] remoteproc: qcom: Add secure PIL support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] drm/msm/a6xx: request memory region
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v9 1/8] remoteproc: qcom: Add PRNG proxy clock
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: qcm6490-fairphone-fp5: Configure PM8008 regulators
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: qcom: sm7225-fairphone-fp4: Configure PM8008 regulators
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/3] ARM: dts: qcom: Add Sony Xperia Z3 Compact smartphone
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/3] ARM: dts: qcom: msm8974-sony-shinano: increase load on l21 for sdhc2
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] power: supply: qcom_battmgr: Enable battery support on x1e80100
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1 3/7] pmdomain: qcom: rpmpd: Add IPQ9574 power domains
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 04/15] soc: qcom: ice: add hwkm support in ice
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1] PCI: qcom: Avoid DBI and ATU register space mirror to BAR/MMIO region
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH 1/3] net: stmmac: Add interconnect support in qcom-ethqos driver
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH v3 17/23] mfd: add s2dos series core driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v5 04/15] soc: qcom: ice: add hwkm support in ice
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• Re: [PATCH 1/3] net: stmmac: Add interconnect support in qcom-ethqos driver
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v1] misc: fastrpc: Move fastrpc driver to misc/fastrpc/
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 0/5] PCI: endpoint: Add EPC 'deinit' event and dw_pcie_ep_linkdown() API
  • From: Krzysztof Wilczyński <kw@xxxxxxxxx>
• Re: [PATCH v5 04/15] soc: qcom: ice: add hwkm support in ice
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/3] net: stmmac: Add interconnect support in qcom-ethqos driver
  • From: Sagar Cheluvegowda <quic_scheluve@xxxxxxxxxxx>
• Re: [PATCH v5 04/15] soc: qcom: ice: add hwkm support in ice
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• Re: [PATCH net-next 1/8] net: phy: add support for overclocked SGMII
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH v5 04/15] soc: qcom: ice: add hwkm support in ice
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 2/4] interconnect: qcom: sc7280: enable QoS configuration
  • From: Odelu Kukatla <quic_okukatla@xxxxxxxxxxx>
• Re: [PATCH 1/5] clk: qcom: dispcc-sm8650: Park RCG's clk source at XO during disable
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• Re: [PATCH RFC 0/5] mm/gup: Introduce exclusive GUP pinning
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [PATCH RFC 0/5] mm/gup: Introduce exclusive GUP pinning
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [PATCH v5 04/15] soc: qcom: ice: add hwkm support in ice
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• Re: [PATCH v9 6/8] dt-bindings: clock: qcom: Add reset for WCSSAON
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH v3 12/23] mfd: Add new driver for MAX77705 PMIC
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v9 7/8] clk: qcom: Add WCSSAON reset
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH v9 8/8] arm64: dts: qcom: Enable Q6v5 WCSS for ipq8074 SoC
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH v5 04/15] soc: qcom: ice: add hwkm support in ice
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 04/15] soc: qcom: ice: add hwkm support in ice
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• Re: [PATCH v1] misc: fastrpc: Move fastrpc driver to misc/fastrpc/
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH v1] misc: fastrpc: Move fastrpc driver to misc/fastrpc/
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH v5 04/15] soc: qcom: ice: add hwkm support in ice
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• RE: [PATCH v5 04/15] soc: qcom: ice: add hwkm support in ice
  • From: "Gaurav Kashyap (QUIC)" <quic_gaurkash@xxxxxxxxxxx>
• RE: [PATCH v5 04/15] soc: qcom: ice: add hwkm support in ice
  • From: Gaurav Kashyap <gaurkash@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: qrb4210-rb2: set role-switch-default-mode
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 04/15] soc: qcom: ice: add hwkm support in ice
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v9 8/8] arm64: dts: qcom: Enable Q6v5 WCSS for ipq8074 SoC
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v9 6/8] dt-bindings: clock: qcom: Add reset for WCSSAON
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v9 5/8] remoteproc: qcom: Update regmap offsets for halt register
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v9 4/8] remoteproc: qcom: Add ssr subdevice identifier
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v9 1/8] remoteproc: qcom: Add PRNG proxy clock
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4 2/8] media: qcom: camss: Attach formats to VFE resources
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v4 6/8] media: qcom: camss: Split testgen, RDI and RX for CSID 170
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v4 8/8] media: qcom: camss: Decouple VFE from CSID
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v4 7/8] media: qcom: camss: Decompose register and link operations
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v4 6/8] media: qcom: camss: Split testgen, RDI and RX for CSID 170
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v4 5/8] media: qcom: camss: Move format related functions
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v4 4/8] media: qcom: camss: Attach formats to CSIPHY resources
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v4 3/8] media: qcom: camss: Attach formats to CSID resources
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v4 1/8] media: qcom: camss: Add per sub-device type resources
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: sa8775p-ride-r3: add new board file
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH v9 0/2] pwrseq: introduce the subsystem and first driver
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v9 0/2] pwrseq: introduce the subsystem and first driver
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 03/22] dt-bindings: thermal: allwinner,sun8i-a83t-ths: reference thermal-sensor schema
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• [PATCH v2 3/3] ARM: dts: qcom: msm8974-sony-shinano: increase load on l21 for sdhc2
  • From: Valeriy Klimin <vdos63@xxxxxxxxx>
• [PATCH v2 2/3] ARM: dts: qcom: Add Sony Xperia Z3 Compact smartphone
  • From: Valeriy Klimin <vdos63@xxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: arm: qcom: Add Sony Xperia Z3 Compact
  • From: Valeriy Klimin <vdos63@xxxxxxxxx>
• [PATCH v2 0/3] Add Sony Xperia Z3 Compact smartphone
  • From: Valeriy Klimin <vdos63@xxxxxxxxx>
• [PATCH] arm64: dts: qcom: msm8916-gplus-fl8005a: Add BMS
  • From: "Lin, Meng-Bo" <linmengbo06890@xxxxxxxxx>
• [PATCH 5/5] clk: qcom: dispcc-sm8650: Update the GDSC wait_val fields and flags
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 4/5] clk: qcom: dispcc-sm8650: add missing CLK_SET_RATE_PARENT flag
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 3/5] clk: qcom: dispcc-sm8650: drop TCXO from table when using rcg2_shared_ops
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 2/5] clk: qcom: dispcc-sm8650: use correct clk ops for dptx1_aux_clk_src
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 1/5] clk: qcom: dispcc-sm8650: Park RCG's clk source at XO during disable
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 0/5] clk: qcom: dispcc-sm8650: round of fixes
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v10 13/15] firmware: qcom: scm: clarify the comment in qcom_scm_pas_init_image()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v9 0/2] pwrseq: introduce the subsystem and first driver
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: sa8775p-ride-r3: add new board file
  • From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>