Initial support for Dell XPS 9345 13" 2024 (Tributo) based on X1E80100. Working: * Touchpad * Keyboard (only post suspend&resume, i2c-hid patch required [1]) * Touchscreen * eDP (low-res IPS, OLED) with brightness control * NVME * USB Type-C ports in USB2/USB3 (one orientation) * WiFi * GPU/aDSP/cDSP firmware loading (requires binaries from Windows) * Lid switch * Sleep/suspend, nothing visibly broken on resume Not working: * Speakers (WIP, pin guessing, x4 WSA8845) * Microphones (WIP, pin guessing) * Fingerprint Reader (WIP, USB MP with ptn3222) * USB as DP/USB3 (WIP, PS8830 based) * Camera Should be working, but cannot be tested due to lack of hw: * higher res IPS panel [1] https://lore.kernel.org/all/20240925100303.9112-1-alex.vinarskis@xxxxxxxxx/ Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@xxxxxxxxx> --- arch/arm64/boot/dts/qcom/Makefile | 1 + .../dts/qcom/x1e80100-dell-tributo-13.dts | 863 ++++++++++++++++++ 2 files changed, 864 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-dell-tributo-13.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index ae002c7cf126..111c589d6bae 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -271,6 +271,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8650-qrd.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e78100-lenovo-thinkpad-t14s.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-asus-vivobook-s15.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb +dtb-$(CONFIG_ARCH_QCOM) += x1e80100-dell-tributo-13.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-lenovo-yoga-slim7x.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-microsoft-romulus13.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-microsoft-romulus15.dtb diff --git a/arch/arm64/boot/dts/qcom/x1e80100-dell-tributo-13.dts b/arch/arm64/boot/dts/qcom/x1e80100-dell-tributo-13.dts new file mode 100644 index 000000000000..7a3540fd21d7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/x1e80100-dell-tributo-13.dts @@ -0,0 +1,863 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2024 Aleksandrs Vinarskis <alex.vinarskis@xxxxxxxxx> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "x1e80100.dtsi" +#include "x1e80100-pmics.dtsi" + +/ { + model = "Dell XPS 13 9345"; + compatible = "dell,tributo-13", "qcom,x1e80100"; + chassis-type = "laptop"; + + aliases { + serial0 = &uart21; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&hall_int_n_default>; + pinctrl-names = "default"; + + switch-lid { + gpios = <&tlmm 92 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + wakeup-source; + wakeup-event-action = <EV_ACT_DEASSERTED>; + }; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-names = "default"; + pinctrl-0 = <&cam_indicator_en>; + + led-camera-indicator { + label = "white:camera-indicator"; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_WHITE>; + gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + /* Reuse as a panic indicator until we get a "camera on" trigger */ + panic-indicator; + }; + }; + + pmic-glink { + compatible = "qcom,x1e80100-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>, + <&tlmm 123 GPIO_ACTIVE_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + /* Right-side USB Type-C port */ + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss0_hs_in: endpoint { + remote-endpoint = <&usb_1_ss0_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss0_ss_in: endpoint { + remote-endpoint = <&usb_1_ss0_qmpphy_out>; + }; + }; + }; + }; + + /* Left-side USB Type-C port */ + connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss1_hs_in: endpoint { + remote-endpoint = <&usb_1_ss1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss1_ss_in: endpoint { + remote-endpoint = <&usb_1_ss1_qmpphy_out>; + }; + }; + }; + }; + }; + + reserved-memory { + linux,cma { + compatible = "shared-dma-pool"; + size = <0x0 0x8000000>; + reusable; + linux,cma-default; + }; + }; + + vreg_edp_3p3: regulator-edp-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_EDP_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&edp_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_nvme: regulator-nvme { + compatible = "regulator-fixed"; + + regulator-name = "VREG_NVME_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&nvme_reg_en>; + pinctrl-names = "default"; + }; + + vreg_vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + qcom,pmic-id = "b"; + vdd-bob1-supply = <&vreg_vph_pwr>; + vdd-bob2-supply = <&vreg_vph_pwr>; + vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob2>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l12-supply = <&vreg_s5j_1p2>; + vdd-l15-supply = <&vreg_s4c_1p8>; + vdd-l17-supply = <&vreg_bob2>; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4b_1p8: ldo4 { + regulator-name = "vreg_l4b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_3p0: ldo8 { + regulator-name = "vreg_l8b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_1p2: ldo12 { + regulator-name = "vreg_l12b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p0: ldo14 { + regulator-name = "vreg_l14b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "c"; + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s1f_0p7>; + + vreg_s4c_1p8: smps4 { + regulator-name = "vreg_s4c_1p8"; + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1c_1p2: ldo1 { + regulator-name = "vreg_l1c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_0p8: ldo2 { + regulator-name = "vreg_l2c_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_0p9: ldo3 { + regulator-name = "vreg_l3c_0p9"; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "d"; + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s4c_1p8>; + vdd-s1-supply = <&vreg_vph_pwr>; + + vreg_l1d_0p8: ldo1 { + regulator-name = "vreg_l1d_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2d_0p9: ldo2 { + regulator-name = "vreg_l2d_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3d_1p8: ldo3 { + regulator-name = "vreg_l3d_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-3 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "e"; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s5j_1p2>; + + vreg_l2e_0p8: ldo2 { + regulator-name = "vreg_l2e_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "f"; + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s5j_1p2>; + vdd-s1-supply = <&vreg_vph_pwr>; + + vreg_s1f_0p7: smps1 { + regulator-name = "vreg_s1f_0p7"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-6 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "i"; + vdd-l1-supply = <&vreg_s4c_1p8>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s1-supply = <&vreg_vph_pwr>; + vdd-s2-supply = <&vreg_vph_pwr>; + + vreg_s1i_0p9: smps1 { + regulator-name = "vreg_s1i_0p9"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2i_1p0: smps2 { + regulator-name = "vreg_s2i_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1i_1p8: ldo1 { + regulator-name = "vreg_l1i_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2i_1p2: ldo2 { + regulator-name = "vreg_l2i_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3i_0p8: ldo3 { + regulator-name = "vreg_l3i_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-7 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "j"; + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s5-supply = <&vreg_vph_pwr>; + + vreg_s5j_1p2: smps5 { + regulator-name = "vreg_s5j_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1j_0p9: ldo1 { + regulator-name = "vreg_l1j_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2j_1p2: ldo2 { + regulator-name = "vreg_l2j_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1256000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3j_0p8: ldo3 { + regulator-name = "vreg_l3j_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&gpu { + status = "okay"; + + zap-shader { + firmware-name = "qcom/x1e80100/dell/tributo/qcdxkmsuc8380.mbn"; + }; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + keyboard@5 { + compatible = "hid-over-i2c"; + reg = <0x5>; + + hid-descr-addr = <0x20>; + interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&kybd_default>; + pinctrl-names = "default"; + + wakeup-source; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + status = "disabled"; + /* PS8830 Retimer @0x8 */ + /* Unknown device @0x9 */ +}; + +&i2c5 { + clock-frequency = <100000>; + status = "disabled"; + /* Unknown device @0x3b */ +}; + +&i2c7 { + clock-frequency = <400000>; + status = "disabled"; + /* PS8830 Retimer @0x8 */ + /* Unknown device @0x9 */ +}; + +&i2c8 { + clock-frequency = <400000>; + + status = "okay"; + + touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&ts0_default>; + pinctrl-names = "default"; + }; +}; + +&i2c9 { + clock-frequency = <400000>; + status = "disabled"; + /* USB3 retimer device @0x4f */ +}; + +&i2c17 { + clock-frequency = <400000>; + status = "okay"; + + touchpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + + hid-descr-addr = <0x20>; + interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&tpad_default>; + pinctrl-names = "default"; + + wakeup-source; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dp3 { + /delete-property/ #sound-dai-cells; + + status = "okay"; + + aux-bus { + panel { + /* 1920x1200 IPS panel is SHP1593, PNP09FF compatible */ + compatible = "edp-panel"; + power-supply = <&vreg_edp_3p3>; + + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss_dp3_out>; + }; + }; + }; + }; + + ports { + port@1 { + reg = <1>; + + mdss_dp3_out: endpoint { + data-lanes = <0 1 2 3>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + + remote-endpoint = <&edp_panel_in>; + }; + }; + }; +}; + +&mdss_dp3_phy { + vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&pcie4 { + perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie4_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie4_phy { + vdda-phy-supply = <&vreg_l3i_0p8>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&pcie6a { + perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_nvme>; + + pinctrl-0 = <&pcie6a_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie6a_phy { + vdda-phy-supply = <&vreg_l1d_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&qupv3_0 { + status = "okay"; +}; + +&qupv3_1 { + status = "okay"; +}; + +&qupv3_2 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/x1e80100/dell/tributo/qcadsp8380.mbn", + "qcom/x1e80100/dell/tributo/adsp_dtbs.elf"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/x1e80100/dell/tributo/qccdsp8380.mbn", + "qcom/x1e80100/dell/tributo/cdsp_dtbs.elf"; + + status = "okay"; +}; + +&smb2360_0_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l2b_3p0>; +}; + +&smb2360_1_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l14b_3p0>; +}; + +&tlmm { + gpio-reserved-ranges = <44 4>, /* SPI11 (TPM) */ + <76 4>, /* SPI19 (TZ Protected) */ + <238 1>; /* UFS Reset */ + + cam_indicator_en: cam-indicator-en-state { + pins = "gpio110"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + edp_reg_en: edp-reg-en-state { + pins = "gpio70"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + hall_int_n_default: hall-int-n-state { + pins = "gpio92"; + function = "gpio"; + + bias-disable; + }; + + kybd_default: kybd-default-state { + pins = "gpio67"; + function = "gpio"; + bias-pull-up; + }; + + nvme_reg_en: nvme-reg-en-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + pcie4_default: pcie4-default-state { + clkreq-n-pins { + pins = "gpio147"; + function = "pcie4_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio146"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio148"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie6a_default: pcie6a-default-state { + clkreq-n-pins { + pins = "gpio153"; + function = "pcie6a_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio152"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio154"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + tpad_default: tpad-default-state { + disable-pins { + pins = "gpio38"; + function = "gpio"; + output-high; + }; + + int-n-pins { + pins = "gpio3"; + function = "gpio"; + bias-pull-up; + }; + + reset-n-pins { + pins = "gpio52"; + function = "gpio"; + bias-disable; + }; + }; + + ts0_default: ts0-default-state { + disable-pins { + pins = "gpio75"; + function = "gpio"; + output-high; + }; + + int-n-pins { + pins = "gpio51"; + function = "gpio"; + bias-pull-up; + }; + + reset-n-pins { + /* Technically should be High-Z input */ + pins = "gpio48"; + function = "gpio"; + output-low; + drive-strength = <2>; + }; + }; +}; + +&uart21 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + +&usb_1_ss0_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + phys = <&smb2360_0_eusb2_repeater>; + + status = "okay"; +}; + +&usb_1_ss0_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l1j_0p9>; + + status = "okay"; +}; + +&usb_1_ss0 { + status = "okay"; +}; + +&usb_1_ss0_dwc3 { + dr_mode = "host"; +}; + +&usb_1_ss0_dwc3_hs { + remote-endpoint = <&pmic_glink_ss0_hs_in>; +}; + +&usb_1_ss0_qmpphy_out { + remote-endpoint = <&pmic_glink_ss0_ss_in>; +}; + +&usb_1_ss1_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + phys = <&smb2360_1_eusb2_repeater>; + + status = "okay"; +}; + +&usb_1_ss1_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + + status = "okay"; +}; + +&usb_1_ss1 { + status = "okay"; +}; + +&usb_1_ss1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_ss1_dwc3_hs { + remote-endpoint = <&pmic_glink_ss1_hs_in>; +}; + +&usb_1_ss1_qmpphy_out { + remote-endpoint = <&pmic_glink_ss1_ss_in>; +}; -- 2.43.0
