Re: [PATCH v2 1/7] serial: qcom-geni: fix premature receiver enable

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thanks Johan for the fixes.

On 10/1/2024 6:20 PM, Johan Hovold wrote:
The receiver should not be enabled until the port is opened so drop the
bogus call to start rx from the setup code which is shared with the
console implementation.

This was added for some confused implementation of hibernation support,
but the receiver must not be started unconditionally as the port may not
have been open when hibernating the system.

Fixes: 35781d8356a2 ("tty: serial: qcom-geni-serial: Add support for Hibernation feature")
Cc:stable@xxxxxxxxxxxxxxx	# 6.2
Cc: Aniket Randive<quic_arandive@xxxxxxxxxxx>
Signed-off-by: Johan Hovold<johan+linaro@xxxxxxxxxx>
---
  drivers/tty/serial/qcom_geni_serial.c | 1 -
  1 file changed, 1 deletion(-)

diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 6f0db310cf69..9ea6bd09e665 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -1152,7 +1152,6 @@ static int qcom_geni_serial_port_setup(struct uart_port *uport)
  			       false, true, true);
  	geni_se_init(&port->se, UART_RX_WM, port->rx_fifo_depth - 2);
  	geni_se_select_mode(&port->se, port->dev_data->mode);
-	qcom_geni_serial_start_rx(uport);
Does it mean hibernation will break now ? Not sure if its tested with hibernation. I can see this call was added to port_setup specifically for hibernation but now after removing it, where is it getting fixed ?
I think RX will not be initialized after hibernation.
  	port->setup = true;
return 0;
-- 2.45.2




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux