Re: [PATCH v2 1/1] i2c: qcom-geni: Support systems with 32MHz serial engine clock

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Sep 26, 2024 at 01:28:37PM GMT, Vladimir Zapolskiy wrote:
> On 9/26/24 06:43, Manikanta Mylavarapu wrote:
> > diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
[..]
> > +
> >   static int geni_i2c_clk_map_idx(struct geni_i2c_dev *gi2c)
> >   {
> >   	int i;
> > -	const struct geni_i2c_clk_fld *itr = geni_i2c_clk_map;
> > +	const struct geni_i2c_clk_fld *itr;
> > +
> > +	if (clk_get_rate(gi2c->se.clk) == 32 * HZ_PER_MHZ)
> > +		itr = geni_i2c_clk_map_32mhz;
> > +	else
> > +		itr = geni_i2c_clk_map_19p2mhz;
> > -	for (i = 0; i < ARRAY_SIZE(geni_i2c_clk_map); i++, itr++) {
> > +	for (i = 0; i < ARRAY_SIZE(geni_i2c_clk_map_19p2mhz); i++, itr++) {
> 
> Struct/data organization here is so weak, that here it's implicitly assumed
> that sizes of two arrays are equal. It could be kept as is of course, just
> pointing to it.
> 

Thanks for pointing this out, Vladimir.

I'd prefer we fix it by adding a sentinel value to the arrays - because
this was only spotted due to the rename, the next guy will not be so
lucky.

Regards,
Bjorn

> >   		if (itr->clk_freq_out == gi2c->clk_freq_out) {
> >   			gi2c->clk_fld = itr;
> >   			return 0;
> 
> --
> Best wishes,
> Vladimir
> 




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux