[PATCH 3/4] iio: adc: sun20i-gpadc: use scoped device_for_each_child_node()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Switch to device_for_each_child_node_scoped() to simplify the code by
removing the need for calls to fwnode_handle_put() in the error path.

This prevents possible memory leaks if new error paths are added without
the required call to fwnode_handle_put().

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
---
 drivers/iio/adc/sun20i-gpadc-iio.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/iio/adc/sun20i-gpadc-iio.c b/drivers/iio/adc/sun20i-gpadc-iio.c
index 6a893d484cf7..136b8d9c294f 100644
--- a/drivers/iio/adc/sun20i-gpadc-iio.c
+++ b/drivers/iio/adc/sun20i-gpadc-iio.c
@@ -155,7 +155,6 @@ static int sun20i_gpadc_alloc_channels(struct iio_dev *indio_dev,
 	unsigned int channel;
 	int num_channels, i, ret;
 	struct iio_chan_spec *channels;
-	struct fwnode_handle *node;
 
 	num_channels = device_get_child_node_count(dev);
 	if (num_channels == 0)
@@ -167,12 +166,10 @@ static int sun20i_gpadc_alloc_channels(struct iio_dev *indio_dev,
 		return -ENOMEM;
 
 	i = 0;
-	device_for_each_child_node(dev, node) {
+	device_for_each_child_node_scoped(dev, node) {
 		ret = fwnode_property_read_u32(node, "reg", &channel);
-		if (ret) {
-			fwnode_handle_put(node);
+		if (ret)
 			return dev_err_probe(dev, ret, "invalid channel number\n");
-		}
 
 		channels[i].type = IIO_VOLTAGE;
 		channels[i].indexed = 1;

-- 
2.43.0





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux