Re: [PATCH 0/2] Add MSM8996/MSM8953 dpu catalog

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2024-08-01 21:25, Dmitry Baryshkov wrote:
On Fri, Jun 28, 2024 at 04:39:38PM GMT, Barnabás Czémán wrote:
This patch series add dpu support for MSM8996/MSM8953 devices.

Note, by default these platforms are still handled by the MDP5 driver
unless the `msm.prefer_mdp5=false' parameter is provided.

Could you please provide a summary of features actually tested with the
DPU driver? Have you tested YUV output? Have you tested RGB planes?
Which LMs have you tested?

How can i check specific feature?
I have set echo 0x32 > /sys/module/drm/parameters/debug DRIVER+ATOMIC+VERBOSE ATOMIC log is pretty verbose and big this way. For lm i have found this kind of message in log: [ 1027.577132] [drm:_dpu_crtc_blend_setup [msm]] lm 0, op_mode 0x2, ctl 0

Signed-off-by: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
---
Dmitry Baryshkov (1):
      drm/msm/dpu: add support for MSM8953

Konrad Dybcio (1):
      drm/msm/dpu: Add MSM8996 support

.../drm/msm/disp/dpu1/catalog/dpu_1_16_msm8953.h | 218 +++++++++++++ .../drm/msm/disp/dpu1/catalog/dpu_1_7_msm8996.h | 348 +++++++++++++++++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c     | 106 +++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h     |   2 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c            |   2 +
 drivers/gpu/drm/msm/msm_drv.c                      |   2 +
 6 files changed, 678 insertions(+)
---
base-commit: df9574a57d02b265322e77fb8628d4d33641dda9
change-id: 20240528-dpu-msm8953-msm8996-5d0fb7e387b8

Best regards,
--
Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux