On Wed, 25 Sept 2024 at 23:28, <barnabas.czeman@xxxxxxxxxxxxxx> wrote: > > On 2024-08-01 21:25, Dmitry Baryshkov wrote: > > On Fri, Jun 28, 2024 at 04:39:38PM GMT, Barnabás Czémán wrote: > >> This patch series add dpu support for MSM8996/MSM8953 devices. > >> > >> Note, by default these platforms are still handled by the MDP5 driver > >> unless the `msm.prefer_mdp5=false' parameter is provided. > > > > Could you please provide a summary of features actually tested with the > > DPU driver? Have you tested YUV output? Have you tested RGB planes? > > Which LMs have you tested? > > How can i check specific feature? > I have set echo 0x32 > /sys/module/drm/parameters/debug > DRIVER+ATOMIC+VERBOSE ATOMIC log is pretty verbose and big this way. > For lm i have found this kind of message in log: [ 1027.577132] > [drm:_dpu_crtc_blend_setup [msm]] lm 0, op_mode 0x2, ctl 0 I think the easiest way to test other LMs is by temporarily commenting out LM_0 / LM_1 in the lms array. > > > >> Signed-off-by: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx> > >> --- > >> Dmitry Baryshkov (1): > >> drm/msm/dpu: add support for MSM8953 > >> > >> Konrad Dybcio (1): > >> drm/msm/dpu: Add MSM8996 support > >> > >> .../drm/msm/disp/dpu1/catalog/dpu_1_16_msm8953.h | 218 > >> +++++++++++++ > >> .../drm/msm/disp/dpu1/catalog/dpu_1_7_msm8996.h | 348 > >> +++++++++++++++++++++ > >> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 106 +++++++ > >> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 2 + > >> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 2 + > >> drivers/gpu/drm/msm/msm_drv.c | 2 + > >> 6 files changed, 678 insertions(+) > >> --- > >> base-commit: df9574a57d02b265322e77fb8628d4d33641dda9 > >> change-id: 20240528-dpu-msm8953-msm8996-5d0fb7e387b8 > >> > >> Best regards, > >> -- > >> Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx> > >> -- With best wishes Dmitry
