Re: [PATCH 00/10] (no cover subject)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon Sep 30, 2024 at 1:54 PM CEST, Bryan O'Donoghue wrote:
> On 30/09/2024 11:52, Luca Weiss wrote:
> > On Wed Sep 4, 2024 at 1:10 PM CEST, Vikram Sharma wrote:
> >> SC7280 is a Qualcomm SoC. This series adds support to
> >> bring up the CSIPHY, CSID, VFE/RDI interfaces in SC7280.
> >>
> >> SC7280 provides
> >>
> >> - 3 x VFE, 3 RDI per VFE
> >> - 2 x VFE Lite, 4 RDI per VFE
> >> - 3 x CSID
> >> - 2 x CSID Lite
> >> - 5 x CSI PHY
> > 
> > Hi Vikram,
> > 
> > I tried this on my QCM6490 Fairphone 5 smartphone.
> > 
> > Unfortunately I couldn't get e.g. CSID test pattern out of camss. I've
> > tested this patchset on v6.11.
> > 
> > These commands did work on an older sc7280 camss patchset (which was
> > never sent to the lists). Can you please take a look?
> > 
> > v4l2-ctl -d /dev/v4l-subdev5 -c test_pattern=1
> > media-ctl -d /dev/media0 -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
> > media-ctl -d /dev/media0 -V '"msm_csid0":1[fmt:UYVY8_2X8/1920x1080 field:none],"msm_vfe0_rdi0":0[fmt:UYVY8_2X8/1920x1080 field:none]'
> > gst-launch-1.0 v4l2src device=/dev/video0 num-buffers=1 ! 'video/x-raw,format=UYVY,width=1920,height=1080' ! jpegenc ! filesink location=image01.jpg
>
> Here's what I have for rb5
>
> # CSID0 TPG RB5
> media-ctl --reset
> yavta --no-query -w '0x009f0903 2' /dev/v4l-subdev6
> yavta --list /dev/v4l-subdev6
> media-ctl -V '"msm_csid0":0[fmt:SRGGB10/4056x3040]'
> media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4056x3040]'
> media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
> media-ctl -d /dev/media0 -p
>
> Maybe on FP5 ...
>
> media-ctl --reset
> yavta --no-query -w '0x009f0903 2' /dev/v4l-subdev5
> yavta --list /dev/v4l-subdev5
> media-ctl -V '"msm_csid0":0[fmt:SRGGB10/4056x3040]'
> media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4056x3040]'
> media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
> media-ctl -d /dev/media0 -p

Hi Bryan!

These commands are to set up the pipeline, and what then to grab an
image from it?

I tried this, but it also just hangs:

$ yavta -B capture-mplane --capture=3 -n 3 -f SRGGB10P -s 4056x3040 /dev/video0 --file=foo-#.bin
Device /dev/video0 opened.
Device `Qualcomm Camera Subsystem' on `platform:acb3000.camss' (driver 'qcom-camss') supports video, capture, with mplanes.
Video format set: SRGGB10P (41415270) 4056x3040 field none, 1 planes: 
 * Stride 5072, buffer size 15418880
Video format: SRGGB10P (41415270) 4056x3040 field none, 1 planes: 
 * Stride 5072, buffer size 15418880
3 buffers requested.
length: 1 offset: 3326519176 timestamp type/source: mono/EoF
Buffer 0/0 mapped at address 0xffffa0c00000.
length: 1 offset: 3326519176 timestamp type/source: mono/EoF
Buffer 1/0 mapped at address 0xffff9fc08000.
length: 1 offset: 3326519176 timestamp type/source: mono/EoF
Buffer 2/0 mapped at address 0xffff9ec10000.

Regards
Luca



>
> ?
>
> ---
> bod






[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux