[PATCH v4 2/6] dt-bindings: PCI: qcom: Move OPP table to qcom,pcie-common.yaml

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



OPP table is a generic property that is also required by other qcom
platforms. Hence move this property to qcom,pcie-common.yaml so that PCIe
on other qcom platforms is able to adjust power domain performance state
and ICC peak bw according to PCIe gen speed and link width.

Signed-off-by: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
---
 Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml | 4 ++++
 Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml | 4 ----
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml
index 704c0f58eea5..3c6430fe9331 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml
@@ -78,6 +78,10 @@ properties:
     description: GPIO controlled connection to WAKE# signal
     maxItems: 1
 
+  operating-points-v2: true
+  opp-table:
+    type: object
+
 required:
   - reg
   - reg-names
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml
index 46bd59eefadb..6e0a6d8f0ed0 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml
@@ -70,10 +70,6 @@ properties:
       - const: msi7
       - const: global
 
-  operating-points-v2: true
-  opp-table:
-    type: object
-
   resets:
     maxItems: 1
 
-- 
2.34.1





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux