Re: [PATCH V2 6/9] clk: qcom: add Global Clock controller (GCC) driver for IPQ5424 SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Sep 27, 2024 at 12:22:41PM GMT, Sricharan R wrote:
> From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
> 
> Add support for the global clock controller found on IPQ5424 SoC.
> 
> Co-developed-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
> Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
> Signed-off-by: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
> ---
>   [v2] Remove CLK_IS_CRITICAL for all clks
>        Added CLK_IGNORE_UNUSED only for gpll0 temporarily till

This should be gpll4, not gpll0 (no need to resend just to fix the
changelog though).

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>


>        dependent consumers are enabled
>        Fixed probe to use qcom_cc_probe
> 
>  drivers/clk/qcom/Kconfig       |    8 +
>  drivers/clk/qcom/Makefile      |    1 +
>  drivers/clk/qcom/gcc-ipq5424.c | 3309 ++++++++++++++++++++++++++++++++
>  3 files changed, 3318 insertions(+)
>  create mode 100644 drivers/clk/qcom/gcc-ipq5424.c
> 

-- 
With best wishes
Dmitry




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux