Re: [PATCH v2 2/7] serial: qcom-geni: fix shutdown race

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Oct 01, 2024 at 03:36:57PM +0200, Bartosz Golaszewski wrote:
> On Tue, Oct 1, 2024 at 2:51 PM Johan Hovold <johan+linaro@xxxxxxxxxx> wrote:
> >
> > A commit adding back the stopping of tx on port shutdown failed to add
> > back the locking which had also been removed by commit e83766334f96
> > ("tty: serial: qcom_geni_serial: No need to stop tx/rx on UART
> > shutdown").
> >
> > Holding the port lock is needed to serialise against the console code,
> > which may update the interrupt enable register and access the port
> > state.
> >
> > Fixes: d8aca2f96813 ("tty: serial: qcom-geni-serial: stop operations in progress at shutdown")
> > Fixes: 947cc4ecc06c ("serial: qcom-geni: fix soft lockup on sw flow control and suspend")
> > Cc: stable@xxxxxxxxxxxxxxx      # 6.3
> > Cc: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> > Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>

> I already reviewed this[1]. I suggest using b4 for automated tag pickup.

There were changes in v2 so I dropped your tag on purpose.

Johan




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux