Linux Device Tree

Thread Index

Re: [PATCHv13] ARM: dts: Add support for the cpuimx25 board from Eukrea and its baseboard.
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
Re: [PATCH 3/3] Add support for the eukrea-cpuimx28.
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
Re: [PATCH 1/3] ARM: dts: mxs: Add 18bit pin config for lcdif.
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
Re: [PATCH 3/3] Add support for the eukrea-cpuimx28.
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
Re: [linux-sunxi] Re: [PATCH 02/10] net: stmmac: Honor DT parameter to force DMA store and forward mode
- From: Chen-Yu Tsai <wens@xxxxxxxx>
Re: [PATCH 07/10] ARM: dts: sun7i: cubietruck: Enable the GMAC
- From: Chen-Yu Tsai <wens@xxxxxxxx>
Re: [PATCH 01/10] net: stmmac: Enable stmmac main clock when probing hardware
- From: Chen-Yu Tsai <wens@xxxxxxxx>
Re: [PATCH v4 3/6] ARM: at91/dt: define sama5d3 clocks
- From: Arnd Bergmann <arnd@xxxxxxxx>
Re: [PATCH 9/9] ARM: pxa27x: device tree support ICP DAS LP-8x4x
- From: Arnd Bergmann <arnd@xxxxxxxx>
Re: [PATCH 1/3] usb: phy-generic: Add GPIO based ChipSelect
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
Re: [PATCH 5/9] ARM: dts: provide DMA config to pxamci
- From: Arnd Bergmann <arnd@xxxxxxxx>
Re: [PATCH 2/4] ARM: AM43xx: fix dpll init in bypass mode
- From: Paul Walmsley <paul@xxxxxxxxx>
Re: [PATCH v2 5/6] Revert "ARM: OMAP2+: Provide alias to USB PHY clock"
- From: Tony Lindgren <tony@xxxxxxxxxxx>
[PATCH 2/9] ARM: dts: fix pxa27x-gpio interrupts
- From: Sergei Ianovich <ynvich@xxxxxxxxx>
Re: [PATCH] ARM: cpu: Document and tweak clock-frequency property
- From: Peter Maydell <peter.maydell@xxxxxxxxxx>
[PATCH 9/9] ARM: pxa27x: device tree support ICP DAS LP-8x4x
- From: Sergei Ianovich <ynvich@xxxxxxxxx>
[PATCH 5/9] ARM: dts: provide DMA config to pxamci
- From: Sergei Ianovich <ynvich@xxxxxxxxx>
[PATCH 1/9] ARM: dts: pxa2xx fix compatible strings
- From: Sergei Ianovich <ynvich@xxxxxxxxx>
Re: [PATCH] ARM: cpu: Document and tweak clock-frequency property
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [lm-sensors] [PATCH 1/3] dt: Add adt7411 to trivial devices list
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
[PATCH 3/3] dt: Describe modalias resolution in i2c/trivial-devices.txt
- From: Ben Gamari <bgamari.foss@xxxxxxxxx>
[PATCH 2/3] dt: Remove redundant entry from trivial devices
- From: Ben Gamari <bgamari.foss@xxxxxxxxx>
[PATCH 1/3] dt: Add adt7411 to trivial devices list
- From: Ben Gamari <bgamari.foss@xxxxxxxxx>
Re: [lm-sensors] [PATCH 1/1] hwmon/adt7411: Add devicetree bindings
- From: Ben Gamari <bgamari.foss@xxxxxxxxx>
Re: [lm-sensors] [PATCH 1/1] hwmon/adt7411: Add devicetree bindings
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
[PATCH 1/1] hwmon/adt7411: Add devicetree bindings
- From: Ben Gamari <bgamari.foss@xxxxxxxxx>
Add devicetree bindings for ADT7411 driver
- From: Ben Gamari <bgamari.foss@xxxxxxxxx>
Re: [PATCH] ARM: cpu: Document and tweak clock-frequency property
- From: Peter Maydell <peter.maydell@xxxxxxxxxx>
Re: [PATCH] ARM: cpu: Document and tweak clock-frequency property
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH] ARM: cpu: Document and tweak clock-frequency property
- From: Peter Maydell <peter.maydell@xxxxxxxxxx>
Re: [PATCH] ARM: cpu: Document and tweak clock-frequency property
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 1/7] net: of_mdio: factor PHY registration from of_mdiobus_register
- From: Rob Herring <robherring2@xxxxxxxxx>
Re: [PATCH 5/7] net: of_mdio: parse "max-speed" property to set PHY supported features
- From: Rob Herring <robherring2@xxxxxxxxx>
Re: lis302 DT binding for Nokia N900
- From: Sebastian Reichel <sre@xxxxxxxxxx>
[PATCH v4 1/9] irqchip: add DesignWare APB ICTL interrupt controller
- From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
[PATCH v4 0/9] ARM: Initial support for Marvell Berlin SoCs
- From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
[PATCH v4 8/9] ARM: add Armada 1500-mini and Chromecast device tree files
- From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
[PATCH v4 7/9] ARM: add Armada 1500 and Sony NSZ-GS7 device tree files
- From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
[PATCH v4 3/9] ARM: l2x0: add Marvell Tauros3 support
- From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
Re: lis302 DT binding for Nokia N900
- From: Éric Piel <eric.piel@xxxxxxxxxxxxxxxx>
Re: lis302 DT binding for Nokia N900
- From: Sebastian Reichel <sre@xxxxxxxxxx>
Re: lis302 DT binding for Nokia N900
- From: Éric Piel <eric.piel@xxxxxxxxxxxxxxxx>
Re: [PATCH] spi: dt-binding: clarify gpio chipselect language
- From: Baruch Siach <baruch@xxxxxxxxxx>
Re: [PATCHv0 0/3] ARM: mvebu: Enable NAND controller in NETGEAR ReadyNAS .dts files
- From: Jason Cooper <jason@xxxxxxxxxxxxxx>
Re: [PATCH v2 0/4] PHY driver for Marvell SATA
- From: Jason Cooper <jason@xxxxxxxxxxxxxx>
Re: [PATCH V12 1/3] ARM: dts: Add pmu sysreg node to exynos5250 and exynos5420 dtsi files
- From: Sylwester Nawrocki <sylvester.nawrocki@xxxxxxxxx>
Re: [PATCH] ARM: cpu: Document and tweak clock-frequency property
- From: Rob Herring <robherring2@xxxxxxxxx>
Re: [PATCH 10/10] ARM: dts: sun7i: Add ethernet alias for GMAC
- From: Chen-Yu Tsai <wens@xxxxxxxx>
Re: [PATCH 2/3] ARM: dts: clps711x: Add bindings documentation for CLPS711X irqchip driver
- From: Arnd Bergmann <arnd@xxxxxxxx>
Re: [linux-sunxi] Re: [PATCH 04/10] net: stmmac: sunxi platfrom extensions for GMAC in Allwinner A20 SoC's
- From: Emilio López <emilio@xxxxxxxxxxxxx>
Re: [rtc-linux] [PATCH v3 1/2] dt-bindings: add hym8563 binding
- From: Heiko Stübner <heiko@xxxxxxxxx>
[PATCH v2 1/1] dts: bindings: doc fix, zero cell clock specifiers are valid
- From: Gerhard Sittig <gsi@xxxxxxx>
Re: [linux-sunxi] Re: [PATCH 3/3] ARM: sunxi: dts: Add ahci support to a few A10 and A20 boards
- From: Michal Suchanek <hramrach@xxxxxxxxx>
Re: [PATCH 04/10] net: stmmac: sunxi platfrom extensions for GMAC in Allwinner A20 SoC's
- From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
Re: [PATCH 3/3] leds: leds-mc13783: Add devicetree support
- From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
Re: [PATCH 3/3] leds: leds-mc13783: Add devicetree support
- From: Alexander Shiyan <shc_work@xxxxxxx>
Re: [PATCH 04/10] net: stmmac: sunxi platfrom extensions for GMAC in Allwinner A20 SoC's
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
Re: [PATCH 3/3] ARM: sunxi: dts: Add ahci support to a few A10 and A20 boards
- From: Olliver Schinagl <oliver+list@xxxxxxxxxxx>
Re: [PATCH 3/3] leds: leds-mc13783: Add devicetree support
- From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
Re: [PATCH 04/10] net: stmmac: sunxi platfrom extensions for GMAC in Allwinner A20 SoC's
- From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
Re: [PATCH 02/10] net: stmmac: Honor DT parameter to force DMA store and forward mode
- From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
Re: [PATCH v2 4/9] clocksource/cadence_ttc: Use enable/disable_irq
- From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Re: [PATCH 01/10] net: stmmac: Enable stmmac main clock when probing hardware
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
Re: [PATCH 04/10] net: stmmac: sunxi platfrom extensions for GMAC in Allwinner A20 SoC's
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
Re: [PATCH 10/10] ARM: dts: sun7i: Add ethernet alias for GMAC
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
Re: [PATCH 02/10] net: stmmac: Honor DT parameter to force DMA store and forward mode
- From: "maxime.ripard" <maxime.ripard@xxxxxxxxxxxxxxxxxx>
Re: [PATCH RFC 08/10] net: stmmac:sti: Add STi SOC glue driver.
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
Re: [PATCH 3/3] ARM: sunxi: dts: Add ahci support to a few A10 and A20 boards
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
Re: [PATCH v6 06/17] dts: mpc512x: add clock specs for client lookups
- From: Anatolij Gustschin <agust@xxxxxxx>
Re: [PATCH v6 03/17] dts: mpc512x: add clock related device tree specs
- From: Anatolij Gustschin <agust@xxxxxxx>
Re: [PATCH v6 02/17] dts: mpc512x: introduce dt-bindings/clock/ header
- From: Anatolij Gustschin <agust@xxxxxxx>
Re: [PATCH v3] watchdog: GPIO-controlled watchdog
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
Re: [PATCH v3] watchdog: GPIO-controlled watchdog
- From: Alexander Shiyan <shc_work@xxxxxxx>
[PATCH 3/3] leds: leds-mc13783: Add devicetree support
- From: Alexander Shiyan <shc_work@xxxxxxx>
Re: [PATCH 00/26] OMAPDSS: DT support (Christmas edition)
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
Re: [PATCH 00/26] OMAPDSS: DT support (Christmas edition)
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
Re: [PATCH 03/10] net: stmmac: Use platform data tied with compatible strings
- From: Chen-Yu Tsai <wens@xxxxxxxx>
Re: [PATCH 07/10] ARM: dts: sun7i: cubietruck: Enable the GMAC
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
Re: [PATCH 07/10] ARM: dts: sun7i: cubietruck: Enable the GMAC
- From: Chen-Yu Tsai <wens@xxxxxxxx>
Re: [PATCH 02/10] net: stmmac: Honor DT parameter to force DMA store and forward mode
- From: Chen-Yu Tsai <wens@xxxxxxxx>
Re: [PATCH V12 1/3] ARM: dts: Add pmu sysreg node to exynos5250 and exynos5420 dtsi files
- From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
Re: [PATCH V12 1/3] ARM: dts: Add pmu sysreg node to exynos5250 and exynos5420 dtsi files
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
Re: ARM: gic_arch_extn (Was: [PATCH v3] irqchip: mmp: add dt support for wakeup)
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
[PATCH 1/2] ARM: dts: bcm281xx: Add i2c busses
- From: Tim Kryger <tim.kryger@xxxxxxxxxx>
[PATCH 0/2] Enable I2C on bcm28155-ap
- From: Tim Kryger <tim.kryger@xxxxxxxxxx>
[PATCH 2/2] ARM: dts: bcm28155-ap: Enable all the i2c busses
- From: Tim Kryger <tim.kryger@xxxxxxxxxx>
Re: [PATCH V12 1/3] ARM: dts: Add pmu sysreg node to exynos5250 and exynos5420 dtsi files
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
Re: [PATCH v2 4/9] clocksource/cadence_ttc: Use enable/disable_irq
- From: Sören Brinkmann <soren.brinkmann@xxxxxxxxxx>
Re: [PATCH v2 2/3] pinctrl: Add msm8x74 configuration
- From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
Re: [PATCH v2 1/3] pinctrl: Add Qualcomm TLMM driver
- From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
Re: [PATCH 03/10] net: stmmac: Use platform data tied with compatible strings
- From: David Miller <davem@xxxxxxxxxxxxx>
Re: ARM: gic_arch_extn (Was: [PATCH v3] irqchip: mmp: add dt support for wakeup)
- From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Re: [PATCH 02/10] net: stmmac: Honor DT parameter to force DMA store and forward mode
- From: David Miller <davem@xxxxxxxxxxxxx>
Re: [PATCH] mfd: cros ec: spi: Add delay for raising CS
- From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
Re: [PATCH 07/10] ARM: dts: sun7i: cubietruck: Enable the GMAC
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
[PATCH v9] gpio: add a driver for the Synopsys DesignWare APB GPIO block
- From: Alan Tull <delicious.quinoa@xxxxxxxxx>
Re: [PATCH 08/10] ARM: dts: sun7i: cubieboard2: Enable GMAC instead of EMAC
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
[PATCH v9] gpio: add a driver for Synopsys DesignWare APB GPIO
- From: Alan Tull <delicious.quinoa@xxxxxxxxx>
Re: [PATCH v3] ARM: davinci: aemif: get rid of davinci-nand driver dependency on aemif
- From: Sekhar Nori <nsekhar@xxxxxx>
Re: [PATCH] mfd: cros ec: spi: Add delay for raising CS
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
Re: [linux-sunxi] [PATCH 00/10] net: stmmac: Add sun7i GMAC glue layer
- From: Michal Suchanek <hramrach@xxxxxxxxx>
Re: [PATCH 1/2] I2C: EMMA Mobile I2C master driver
- From: Ian Molton <ian.molton@xxxxxxxxxxxxxxx>
Re: [PATCH 1/3] usb: phy-generic: Add GPIO based ChipSelect
- From: Felipe Balbi <balbi@xxxxxx>
Re: [PATCH v2 1/7] usb: dwc3: get "usb_phy" only if the platform indicates the presence of PHY's
- From: Felipe Balbi <balbi@xxxxxx>
Re: [PATCH 0/7] net: of_mdio improvements
- From: David Miller <davem@xxxxxxxxxxxxx>
Re: [PATCH V12 3/3] ARM: dts: update watchdog device nodes for Exynos5250 and Exynos5420
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
Re: [PATCH V12 2/3] watchdog: s3c2410_wdt: use syscon regmap interface to configure pmu register
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
Re: [PATCH V12 1/3] ARM: dts: Add pmu sysreg node to exynos5250 and exynos5420 dtsi files
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
[PATCH 08/10] ARM: dts: sun7i: cubieboard2: Enable GMAC instead of EMAC
- From: Chen-Yu Tsai <wens@xxxxxxxx>
[PATCH 03/10] net: stmmac: Use platform data tied with compatible strings
- From: Chen-Yu Tsai <wens@xxxxxxxx>
[PATCH 07/10] ARM: dts: sun7i: cubietruck: Enable the GMAC
- From: Chen-Yu Tsai <wens@xxxxxxxx>
[PATCH 04/10] net: stmmac: sunxi platfrom extensions for GMAC in Allwinner A20 SoC's
- From: Chen-Yu Tsai <wens@xxxxxxxx>
[PATCH 09/10] ARM: dts: sun7i: olinuxino-micro: Enable GMAC instead of EMAC
- From: Chen-Yu Tsai <wens@xxxxxxxx>
[PATCH 05/10] ARM: dts: sun7i: Add GMAC controller node to sun7i DTSI
- From: Chen-Yu Tsai <wens@xxxxxxxx>
[PATCH 10/10] ARM: dts: sun7i: Add ethernet alias for GMAC
- From: Chen-Yu Tsai <wens@xxxxxxxx>
[PATCH 00/10] net: stmmac: Add sun7i GMAC glue layer
- From: Chen-Yu Tsai <wens@xxxxxxxx>
[PATCH 06/10] ARM: dts: sun7i: Add pin muxing options for the GMAC
- From: Chen-Yu Tsai <wens@xxxxxxxx>
[PATCH 02/10] net: stmmac: Honor DT parameter to force DMA store and forward mode
- From: Chen-Yu Tsai <wens@xxxxxxxx>
[PATCH 01/10] net: stmmac: Enable stmmac main clock when probing hardware
- From: Chen-Yu Tsai <wens@xxxxxxxx>
Re: [PATCH V12 1/3] ARM: dts: Add pmu sysreg node to exynos5250 and exynos5420 dtsi files
- From: Sylwester Nawrocki <sylvester.nawrocki@xxxxxxxxx>
Re: [PATCH 4/4] pinctrl: tegra: add pinmux controller driver for Tegra124
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
Re: [PATCH v3] checkpatch: add DT compatible string documentation checks
- From: Joe Perches <joe@xxxxxxxxxxx>
RE: [PATCH v4 3/9] phy: Add new Exynos USB PHY driver
- From: Kamil Debski <k.debski@xxxxxxxxxxx>
Re: [PATCH V12 2/3] watchdog: s3c2410_wdt: use syscon regmap interface to configure pmu register
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
Re: [PATCH V12 1/3] ARM: dts: Add pmu sysreg node to exynos5250 and exynos5420 dtsi files
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
RE: [PATCH v4 5/9] usb: s3c-hsotg: Use the new Exynos USB phy driver with the generic phy framework
- From: Kamil Debski <k.debski@xxxxxxxxxxx>
RE: [PATCH v4 3/9] phy: Add new Exynos USB PHY driver
- From: Kamil Debski <k.debski@xxxxxxxxxxx>
Re: [PATCH v4 0/4] LP3943 MFD driver for a GPIO expander and a PWM generator
- From: Lee Jones <lee.jones@xxxxxxxxxx>
[PATCH 7/7] clk/exynos5260: add clock file for exynos5260
- From: Rahul Sharma <rahul.sharma@xxxxxxxxxxx>
[PATCH 6/7] clk/samsung: add support for pll2650xx
- From: Rahul Sharma <rahul.sharma@xxxxxxxxxxx>
[PATCH 5/7] clk/samsung: add support for pll2550xx
- From: Rahul Sharma <rahul.sharma@xxxxxxxxxxx>
[PATCH 4/7] clk/samsung: add support for multuple clock providers
- From: Rahul Sharma <rahul.sharma@xxxxxxxxxxx>
[PATCH 3/7] ARM: dts: add dts files for exynos5260 SoC
- From: Rahul Sharma <rahul.sharma@xxxxxxxxxxx>
[PATCH 2/7] pinctrl: exynos: add exynos5260 SoC specific data
- From: Rahul Sharma <rahul.sharma@xxxxxxxxxxx>
[PATCH 1/7] ARM: EXYNOS: initial board support for exynos5260 SoC
- From: Rahul Sharma <rahul.sharma@xxxxxxxxxxx>
[PATCH 0/7] exynos: add basic support for exynos5260 SoC
- From: Rahul Sharma <rahul.sharma@xxxxxxxxxxx>
Re: [PATCH 3/3] ASoC: fsl: imx-wm8962: Add headphone and microphone jack plugin/out detection
- From: Nicolin Chen <b42378@xxxxxxxxxxxxx>
Re: [PATCH 3/3] ASoC: fsl: imx-wm8962: Add headphone and microphone jack plugin/out detection
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH v4 5/9] usb: s3c-hsotg: Use the new Exynos USB phy driver with the generic phy framework
- From: Matt Porter <matt.porter@xxxxxxxxxx>
[PATCH] ARM: i.MX28: dts: rename usbphy pin names
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
Re: [PATCH 3/3] ASoC: fsl: imx-wm8962: Add headphone and microphone jack plugin/out detection
- From: Nicolin Chen <b42378@xxxxxxxxxxxxx>
Re: [PATCH RFC 2/2] Documentation: arm: define DT C-states bindings
- From: Vincent Guittot <vincent.guittot@xxxxxxxxxx>
Re: [PATCH] of: Add simple panel device tree binding
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCHv7][ 2/2] video: backlight: gpio-backlight: Add DT support.
- From: Alexander Shiyan <shc_work@xxxxxxx>
Re: [PATCH 3/3] ASoC: fsl: imx-wm8962: Add headphone and microphone jack plugin/out detection
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH v3 07/10] drivers: phy: usb3/pipe3: Adapt pipe3 driver to Generic PHY Framework
- From: Roger Quadros <rogerq@xxxxxx>
[PATCHv2 08/10] Documentation: bindings: ti-qspi: update binding information.
- From: Sourav Poddar <sourav.poddar@xxxxxx>
[PATCHv2 10/10] arm: dts: am43x-epos: Add qspi device.
- From: Sourav Poddar <sourav.poddar@xxxxxx>
[PATCHv2 09/10] arm: dts: dra7: Add qspi device.
- From: Sourav Poddar <sourav.poddar@xxxxxx>
[PATCHv2 07/10] drivers: mtd: m25p80: Adapt driver to support memory mapped read.
- From: Sourav Poddar <sourav.poddar@xxxxxx>
[PATCHv2 06/10] drivers: mtd: m25p80: Add api to configure master register.
- From: Sourav Poddar <sourav.poddar@xxxxxx>
[PATCHv2 05/10] spi/qspi: Add api for get_buf/put_buf.
- From: Sourav Poddar <sourav.poddar@xxxxxx>
[PATCHv2 04/10] spi/qspi: configure set up register for memory map.
- From: Sourav Poddar <sourav.poddar@xxxxxx>
[PATCHv2 03/10] spi/qspi: Add support to switc to memory mapped operation.
- From: Sourav Poddar <sourav.poddar@xxxxxx>
[PATCHv2 00/10] Add memory mapped support for ti qspi, m25p80 serial flash.
- From: Sourav Poddar <sourav.poddar@xxxxxx>
[PATCHv2 01/10] spi/spi.h: Add get_buf/put_buf support in spi master.
- From: Sourav Poddar <sourav.poddar@xxxxxx>
[PATCHv2 02/10] spi/qspi: parse register by name.
- From: Sourav Poddar <sourav.poddar@xxxxxx>
Re: [PATCHv5][ 2/8] staging: imx-drm: Add RGB666 support for parallel display.
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
Re: [PATCHv7][ 2/2] video: backlight: gpio-backlight: Add DT support.
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
Re: [PATCHv7][ 2/2] video: backlight: gpio-backlight: Add DT support.
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
Re: [PATCH] of: Add simple panel device tree binding
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
Re: [PATCH v2 0/3] pinctrl: Qualcomm 8x74 pinctrl driver
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
Re: [PATCHv5][ 2/8] staging: imx-drm: Add RGB666 support for parallel display.
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
Re: [PATCH v8 1/2] PWM: atmel-pwm: add PWM controller driver
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
Re: [PATCH v4 0/4] LP3943 MFD driver for a GPIO expander and a PWM generator
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
Re: [PATCHv5][ 5/8] staging: imx-drm: parallel display: add regulator support.
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
RE: [PATCH v4 4/9] usb: ehci-s5p: Change to use phy provided by the generic phy framework
- From: Kamil Debski <k.debski@xxxxxxxxxxx>
Re: [PATCHv5][ 2/8] staging: imx-drm: Add RGB666 support for parallel display.
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
[PATCH] ARM64: dts: Add clock-frequency to model cpu nodes
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCHv7][ 2/2] video: backlight: gpio-backlight: Add DT support.
- From: Alexander Shiyan <shc_work@xxxxxxx>
Re: [PATCHv5][ 3/8] staging: imx-drm: Correct BGR666 and the board's dts that use them.
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
Re: [PATCH v7 2/2] mmc: sdhci-msm: Initial support for MSM chipsets
- From: Georgi Djakov <gdjakov@xxxxxxxxxx>
Re: [PATCH v7 1/2] mmc: sdhci-msm: Initial SDHCI MSM driver documentation
- From: Georgi Djakov <gdjakov@xxxxxxxxxx>
[PATCH] ARM: cpu: Document and tweak clock-frequency property
- From: Mark Brown <broonie@xxxxxxxxxx>
[PATCH v7 0/3] mfd: max14577: Add max14577 MFD drivers
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
[PATCH v7 3/3] mfd: max14577: Add device tree bindings document
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
[PATCH v7 2/3] regulator: max14577: Add regulator driver for Maxim 14577
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
[PATCH v7 1/3] charger: max14577: Add charger support for Maxim 14577
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
Re: [PATCH v4 7/9] phy: Add Exynos 5250 support to the Exynos USB 2.0 PHY driver
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
Re: [PATCH v4 6/9] phy: Add support for S5PV210 to the Exynos USB PHY driver
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
Re: [PATCH v4 5/9] usb: s3c-hsotg: Use the new Exynos USB phy driver with the generic phy framework
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
Re: [PATCH 2/3] ARM: sunxi: Add an ahci-platform compatible AHCI driver for the Allwinner SUNXi series of SoCs
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
Re: [PATCH] serial: rewrite pxa2xx-uart to use 8250_core
- From: James Cameron <quozl@xxxxxxxxxx>
Re: [PATCH v4 3/9] phy: Add new Exynos USB PHY driver
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
RE: [PATCH 1/9] phy: core: Change the way of_phy_get is called
- From: Kamil Debski <k.debski@xxxxxxxxxxx>
RE: [PATCH v4 0/9] phy: Add new Exynos USB 2.0 PHY driver
- From: Kamil Debski <k.debski@xxxxxxxxxxx>
[PATCH 9/9] dts: Add usb2phy to Exynos 5250
- From: Kamil Debski <k.debski@xxxxxxxxxxx>
Re: [PATCH] serial: rewrite pxa2xx-uart to use 8250_core
- From: Sergei Ianovich <ynvich@xxxxxxxxx>
[PATCH 8/9] dts: Add usb2phy to Exynos 4
- From: Kamil Debski <k.debski@xxxxxxxxxxx>
[PATCH v4 7/9] phy: Add Exynos 5250 support to the Exynos USB 2.0 PHY driver
- From: Kamil Debski <k.debski@xxxxxxxxxxx>
[PATCH v4 6/9] phy: Add support for S5PV210 to the Exynos USB PHY driver
- From: Kamil Debski <k.debski@xxxxxxxxxxx>
Re: [PATCH 17/26] ARM: omap3-tobi.dts: add lcd (TEST)
- From: Florian Vaussard <florian.vaussard@xxxxxxx>
Re: [PATCHv2][ 2/2] ARM: dts: Add support for the cpuimx53 board from Eukrea and its baseboard.
- From: Alexander Shiyan <shc_work@xxxxxxx>
[PATCH v2 3/4] dt: Add bindings documentation for the ADI AXI-SPDIF audio controller
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
[PATCH v2 1/4] dt: Add bindings documentation for the ADI AXI-I2S controller
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
Re: [PATCH 4/4] pinctrl: tegra: add pinmux controller driver for Tegra124
- From: Thierry Reding <treding@xxxxxxxxxx>
[PATCHv2][ 2/2] ARM: dts: Add support for the cpuimx53 board from Eukrea and its baseboard.
- From: Denis Carikli <denis@xxxxxxxxxx>
Re: [PATCH v3] checkpatch: add DT compatible string documentation checks
- From: Andy Whitcroft <apw@xxxxxxxxxxxxx>
Re: [PATCH] serial: rewrite pxa2xx-uart to use 8250_core
- From: James Cameron <quozl@xxxxxxxxxx>
[PATCH 3/3] ASoC: fsl: imx-wm8962: Add headphone and microphone jack plugin/out detection
- From: Nicolin Chen <b42378@xxxxxxxxxxxxx>
Re: [PATCHv13][ 2/4] video: imxfb: Also add pwmr for the device tree.
- From: Alexander Shiyan <shc_work@xxxxxxx>
Re: [PATCHv13][ 2/4] video: imxfb: Also add pwmr for the device tree.
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH] serial: rewrite pxa2xx-uart to use 8250_core
- From: Sergei Ianovich <ynvich@xxxxxxxxx>
Re: [PATCH v2] serial: rewrite pxa2xx-uart to use 8250_core
- From: James Cameron <quozl@xxxxxxxxxx>
Re: [PATCH 2/3] ARM: sunxi: Add an ahci-platform compatible AHCI driver for the Allwinner SUNXi series of SoCs
- From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
Re: [PATCH] serial: rewrite pxa2xx-uart to use 8250_core
- From: Sergei Ianovich <ynvich@xxxxxxxxx>
Re: [PATCH 2/3] ARM: sunxi: Add an ahci-platform compatible AHCI driver for the Allwinner SUNXi series of SoCs
- From: Oliver Schinagl <oliver@xxxxxxxxxxx>
[PATCH v2] serial: rewrite pxa2xx-uart to use 8250_core
- From: Sergei Ianovich <ynvich@xxxxxxxxx>
Re: [PATCH RESEND v5 0/4] LP3943 MFD driver for a GPIO expander and a PWM generator
- From: Lee Jones <lee.jones@xxxxxxxxxx>
Re: [PATCH 2/3] ARM: sunxi: Add an ahci-platform compatible AHCI driver for the Allwinner SUNXi series of SoCs
- From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
Re: [PATCH 15/26] ARM: omap4-panda.dts: add display information
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
Re: [PATCHv3] usb: chipidea: add support for USB OTG controller on TI-NSPIRE
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
Re: [PATCHv13][ 2/4] video: imxfb: Also add pwmr for the device tree.
- From: Alexander Shiyan <shc_work@xxxxxxx>
Re: [PATCH 18/26] ARM: omap3-beagle.dts: add display information
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
Re: [PATCHv13][ 2/4] video: imxfb: Also add pwmr for the device tree.
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCHv13][ 2/4] video: imxfb: Also add pwmr for the device tree.
- From: Alexander Shiyan <shc_work@xxxxxxx>
Re: [PATCH] usb: chipidea: fix device tree binding for zevio/nspire usb driver
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
RE: [PATCH v6 3/3] dma: Add Freescale eDMA engine driver support
- From: Jingchang Lu <jingchang.lu@xxxxxxxxxxxxx>
Re: [PATCHv13][ 3/4] video: Kconfig: Allow more broad selection of the imxfb framebuffer driver.
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCHv13][ 2/4] video: imxfb: Also add pwmr for the device tree.
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH V3 0/4] ARM: tegra: convert dts files of all Tegra platforms to use pinctrl defines
- From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
Re: [PATCH 4/4] pinctrl: tegra: add pinmux controller driver for Tegra124
- From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
Re: [PATCH 1/4] pinctrl: tegra: Add devicetree binding document for Tegra124
- From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
Re: [PATCH 2/4] ARM: tegra: add pinmux controller to tegra124.dtsi
- From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
[PATCH V12 2/3] watchdog: s3c2410_wdt: use syscon regmap interface to configure pmu register
- From: Leela Krishna Amudala <l.krishna@xxxxxxxxxxx>
[PATCH V12 3/3] ARM: dts: update watchdog device nodes for Exynos5250 and Exynos5420
- From: Leela Krishna Amudala <l.krishna@xxxxxxxxxxx>
[PATCH V12 1/3] ARM: dts: Add pmu sysreg node to exynos5250 and exynos5420 dtsi files
- From: Leela Krishna Amudala <l.krishna@xxxxxxxxxxx>
[PATCH V12 0/3] Add watchdog DT nodes and use syscon regmap interface to configure pmu registers
- From: Leela Krishna Amudala <l.krishna@xxxxxxxxxxx>
Re: [PATCH 1/9] phy: core: Change the way of_phy_get is called
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
Re: [PATCH] ARM: dts: Fix mmc node on exynos5250 snow board
- From: Yuvaraj Kumar <yuvaraj.cd@xxxxxxxxx>
[GIT PULL] DeviceTree fixes for 3.13
- From: Rob Herring <robherring2@xxxxxxxxx>
Re: [PATCH] serial: rewrite pxa2xx-uart to use 8250_core
- From: James Cameron <quozl@xxxxxxxxxx>
Re: [PATCH] serial: rewrite pxa2xx-uart to use 8250_core
- From: James Cameron <quozl@xxxxxxxxxx>
Re: [PATCH v5 0/4] LP3943 MFD driver for a GPIO expander and a PWM generator
- From: Milo Kim <milo.kim@xxxxxx>
RE: [PATCH 1/2] usb: chipidea: fix mistake in device tree binding of nspire-usb to use vendor name 'lsi' instead of SoC name 'zevio'
- From: Peter Chen <Peter.Chen@xxxxxxxxxxxxx>
[PATCH RESEND v5 4/4] Documentation: add LP3943 DT bindings and document
- From: Milo Kim <milo.kim@xxxxxx>
[PATCH RESEND v5 3/4] pwm: add LP3943 PWM driver
- From: Milo Kim <milo.kim@xxxxxx>
[PATCH RESEND v5 1/4] mfd: add LP3943 MFD driver
- From: Milo Kim <milo.kim@xxxxxx>
[PATCH RESEND v5 2/4] gpio: add LP3943 I2C GPIO expander driver
- From: Milo Kim <milo.kim@xxxxxx>
[PATCH RESEND v5 0/4] LP3943 MFD driver for a GPIO expander and a PWM generator
- From: Milo Kim <milo.kim@xxxxxx>
[PATCH v5 4/4] Documentation: add LP3943 DT bindings and document
- From: Milo Kim <milo.kim@xxxxxx>
[PATCH v2 1/3] pinctrl: Add Qualcomm TLMM driver
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
[PATCH v2 2/3] pinctrl: Add msm8x74 configuration
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
[PATCH v2 3/3] pinctrl: Add documentation for pinctrl-msm8x74
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
[PATCH v5 4/4] Documentation: add LP3943 DT bindings and document
- From: Milo Kim <milo.kim@xxxxxx>
[PATCH v2 0/3] pinctrl: Qualcomm 8x74 pinctrl driver
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
[PATCH v5 3/4] pwm: add LP3943 PWM driver
- From: Milo Kim <milo.kim@xxxxxx>
[PATCH v5 2/4] gpio: add LP3943 I2C GPIO expander driver
- From: Milo Kim <milo.kim@xxxxxx>
[PATCH v5 1/4] mfd: add LP3943 MFD driver
- From: Milo Kim <milo.kim@xxxxxx>
[PATCH v5 0/4] LP3943 MFD driver for a GPIO expander and a PWM generator
- From: Milo Kim <milo.kim@xxxxxx>
Re: [PATCH 2/2] mmc: dw_mmc: add dw_mmc-k3 for k3 platform
- From: Arnd Bergmann <arnd@xxxxxxxx>
Re: [PATCH] net: davinci_emac: Fix platform data handling and make usable for am3517
- From: David Miller <davem@xxxxxxxxxxxxx>
Re: [PATCH 1/3] pinctrl: Add Qualcomm TLMM driver
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
Re: [PATCHv4 1/4] arm: dts: Add support for SD/MMC on SOCFPGA
- From: Arnd Bergmann <arnd@xxxxxxxx>
Re: [PATCH 5/7] net: of_mdio: parse "max-speed" property to set PHY supported features
- From: David Miller <davem@xxxxxxxxxxxxx>
Re: [PATCH] serial: rewrite pxa2xx-uart to use 8250_core
- From: James Cameron <quozl@xxxxxxxxxx>
[PATCHv2 1/5] wl1251: split wl251 platform data to a separate structure
- From: Sebastian Reichel <sre@xxxxxxxxxx>
[PATCHv2 3/5] wl1251: spi: add vio regulator support
- From: Sebastian Reichel <sre@xxxxxxxxxx>
[PATCHv2 5/5] Documentation: dt: wireless: Add wl1251
- From: Sebastian Reichel <sre@xxxxxxxxxx>
[PATCHv2 2/5] wl1251: move power GPIO handling into the driver
- From: Sebastian Reichel <sre@xxxxxxxxxx>
[PATCHv2 4/5] wl1251: spi: add device tree support
- From: Sebastian Reichel <sre@xxxxxxxxxx>
[PATCHv2 0/5] wl1251 device tree support
- From: Sebastian Reichel <sre@xxxxxxxxxx>
Re: [PATCH] serial: rewrite pxa2xx-uart to use 8250_core
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: [PATCH 5/7] net: of_mdio: parse "max-speed" property to set PHY supported features
- From: Joe Perches <joe@xxxxxxxxxxx>
Re: [PATCH] serial: rewrite pxa2xx-uart to use 8250_core
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Re: [PATCH 5/7] net: of_mdio: parse "max-speed" property to set PHY supported features
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
Re: [PATCH] pinctrl: samsung: Allow pin value to be initialized using pinfunc.
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
Re: [PATCH 5/7] net: of_mdio: parse "max-speed" property to set PHY supported features
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
Re: [PATCH 3/7] net: of_mdio: do not overwrite PHY interrupt configuration
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
Re: [PATCH V3 0/4] ARM: tegra: convert dts files of all Tegra platforms to use pinctrl defines
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
Re: [PATCH 4/4] pinctrl: tegra: add pinmux controller driver for Tegra124
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
[PATCH] serial: rewrite pxa2xx-uart to use 8250_core
- From: Sergei Ianovich <ynvich@xxxxxxxxx>
Re: [PATCH 2/4] ARM: tegra: add pinmux controller to tegra124.dtsi
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
Re: [PATCH 3/4] ARM: tegra: select PINCTRL_TEGRA124 for Tegra124 SoC
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
Re: [PATCH 1/4] pinctrl: tegra: Add devicetree binding document for Tegra124
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
Re: [PATCH 2/4] ARM: tegra: add pinmux controller to tegra124.dtsi
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
[PATCH 2/2] Documentation: dt: Document TSC2005 DT binding
- From: Sebastian Reichel <sre@xxxxxxxxxx>
[PATCH 1/2] Input: tsc2005: add DT support
- From: Sebastian Reichel <sre@xxxxxxxxxx>
[PATCH 0/2] tsc2005 DT binding
- From: Sebastian Reichel <sre@xxxxxxxxxx>
[PATCH 1/7] net: of_mdio: factor PHY registration from of_mdiobus_register
- From: Florian Fainelli <florian@xxxxxxxxxxx>
[PATCH 2/7] net: of_mdio: use PHY_MAX_ADDR constant
- From: Florian Fainelli <florian@xxxxxxxxxxx>
[PATCH 7/7] Documentation: update Ethernet PHY devices binding with 'max-speed'
- From: Florian Fainelli <florian@xxxxxxxxxxx>
[PATCH 5/7] net: of_mdio: parse "max-speed" property to set PHY supported features
- From: Florian Fainelli <florian@xxxxxxxxxxx>
[PATCH 6/7] arc_emac: remove custom "max-speed" parsing code
- From: Florian Fainelli <florian@xxxxxxxxxxx>
[PATCH 3/7] net: of_mdio: do not overwrite PHY interrupt configuration
- From: Florian Fainelli <florian@xxxxxxxxxxx>
[PATCH 0/7] net: of_mdio improvements
- From: Florian Fainelli <florian@xxxxxxxxxxx>
[PATCH 4/7] net: phy: breakdown PHY_*_FEATURES defines
- From: Florian Fainelli <florian@xxxxxxxxxxx>
Re: [PATCH v8] gpio: add a driver for the Synopsys DesignWare APB GPIO block
- From: delicious quinoa <delicious.quinoa@xxxxxxxxx>
Re: [PATCH v8] gpio: add a driver for the Synopsys DesignWare APB GPIO block
- From: delicious quinoa <delicious.quinoa@xxxxxxxxx>
Re: [PATCH v8] gpio: add a driver for the Synopsys DesignWare APB GPIO block
- From: delicious quinoa <delicious.quinoa@xxxxxxxxx>
[PATCH] ARM: dts: Leave sdio1 as disabled on bcm28155-ap
- From: Tim Kryger <tim.kryger@xxxxxxxxxx>
Re: [PATCHv4 1/4] arm: dts: Add support for SD/MMC on SOCFPGA
- From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
[RESEND PATCH] ARM: dts: bcm28155-ap: Fix Card Detection GPIO
- From: Tim Kryger <tim.kryger@xxxxxxxxxx>
Re: [PATCH v4 0/4] LP3943 MFD driver for a GPIO expander and a PWM generator
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCHv4 1/4] arm: dts: Add support for SD/MMC on SOCFPGA
- From: Arnd Bergmann <arnd@xxxxxxxx>
Re: [PATCHv4 2/4] clk: socfpga: Add a hook for SD/MMC driver to control CIU clock settings
- From: Arnd Bergmann <arnd@xxxxxxxx>
Re: [PATCHv5][ 5/8] staging: imx-drm: parallel display: add regulator support.
- From: Marek Vasut <marex@xxxxxxx>
Re: [PATCHv5][ 3/8] staging: imx-drm: Correct BGR666 and the board's dts that use them.
- From: Marek Vasut <marex@xxxxxxx>
[PATCH v4 0/8] Update Kona drivers to use clocks
- From: Tim Kryger <tim.kryger@xxxxxxxxxx>
[PATCH v4 7/8] clocksource: kona: Add basic use of external clock
- From: Tim Kryger <tim.kryger@xxxxxxxxxx>
[PATCH v4 1/8] ARM: dts: Declare clocks as fixed on bcm11351
- From: Tim Kryger <tim.kryger@xxxxxxxxxx>
[PATCH v4 6/8] Documentation: dt: kona-timer: Add clocks property
- From: Tim Kryger <tim.kryger@xxxxxxxxxx>
[PATCH v4 5/8] mmc: sdhci-bcm-kona: Add basic use of clocks
- From: Tim Kryger <tim.kryger@xxxxxxxxxx>
[PATCH v4 2/8] ARM: dts: Specify clocks for UARTs on bcm11351
- From: Tim Kryger <tim.kryger@xxxxxxxxxx>
[PATCH v4 3/8] Documentation: dt: kona-sdhci: Add clocks property
- From: Tim Kryger <tim.kryger@xxxxxxxxxx>
[PATCH v4 4/8] ARM: dts: Specify clocks for SDHCIs on bcm11351
- From: Tim Kryger <tim.kryger@xxxxxxxxxx>
[PATCH v4 8/8] ARM: dts: Specify clocks for timer on bcm11351
- From: Tim Kryger <tim.kryger@xxxxxxxxxx>
Re: [PATCH V11 1/3] ARM: dts: Add pmu sysreg node to exynos5250 and exynos5420 dtsi files
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
Re: [PATCH V11 1/3] ARM: dts: Add pmu sysreg node to exynos5250 and exynos5420 dtsi files
- From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
Re: [PATCH v4 4/9] usb: ehci-s5p: Change to use phy provided by the generic phy framework
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Re: [PATCH] ARM: dts: Fix mmc node on exynos5250 snow board
- From: Sonny Rao <sonnyrao@xxxxxxxxxxxx>
Re: [PATCH] ARM: DTS: omap4-sdp: Add regulator for LCD backlight (pwm-backlight)
- From: Tony Lindgren <tony@xxxxxxxxxxx>
Re: [PATCH V11 1/3] ARM: dts: Add pmu sysreg node to exynos5250 and exynos5420 dtsi files
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
Re: [PATCH V11 1/3] ARM: dts: Add pmu sysreg node to exynos5250 and exynos5420 dtsi files
- From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
[PATCHv5][ 5/8] staging: imx-drm: parallel display: add regulator support.
- From: Denis Carikli <denis@xxxxxxxxxx>
[PATCHv5][ 3/8] staging: imx-drm: Correct BGR666 and the board's dts that use them.
- From: Denis Carikli <denis@xxxxxxxxxx>
[PATCHv5][ 2/8] staging: imx-drm: Add RGB666 support for parallel display.
- From: Denis Carikli <denis@xxxxxxxxxx>
[PATCHv5][ 1/8] [media] v4l2: add new V4L2_PIX_FMT_RGB666 pixel format.
- From: Denis Carikli <denis@xxxxxxxxxx>
Re: [PATCH V11 2/3] watchdog: s3c2410_wdt: use syscon regmap interface to configure pmu register
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
Re: [PATCH V11 1/3] ARM: dts: Add pmu sysreg node to exynos5250 and exynos5420 dtsi files
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
Re: [PATCH v2 4/4] Phy: Add DT nodes on kirkwood and Dove for the SATA PHY
- From: Jason Cooper <jason@xxxxxxxxxxxxxx>
Re: [PATCH v2 1/4] Phy: DT binding documentation for Marvell MVEBU SATA phy.
- From: Jason Cooper <jason@xxxxxxxxxxxxxx>
[PATCH v3] ARM: davinci: aemif: get rid of davinci-nand driver dependency on aemif
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx>
Re: [PATCH] pinctrl: samsung: Allow pin value to be initialized using pinfunc.
- From: Kevin Bracey <kevin@xxxxxxxxx>
Re: [PATCH] pinctrl: samsung: Allow pin value to be initialized using pinfunc.
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [RFC PATCH 2/2] of: add initcall with match boilerplate helpers
- From: Rob Herring <robherring2@xxxxxxxxx>
[PATCHv7][ 2/2] video: backlight: gpio-backlight: Add DT support.
- From: Denis Carikli <denis@xxxxxxxxxx>
[PATCHv7][ 1/2] backlight: gpio_backlight: Use a default state enum.
- From: Denis Carikli <denis@xxxxxxxxxx>
[PATCH v3 8/9] mtd: nand: davinci: reuse driver for Keystone arch
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx>
[PATCH v3 3/9] mtd: nand: davinci: check required ti,davinci-chipselect property
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx>
[PATCH v3 2/9] mtd: nand: davinci: return ENOMEM if memory allocation is failed
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx>
[PATCH v3 5/9] mtd: nand: davinci: move bindings under mtd
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx>
[PATCH v3 6/9] mtd: nand: davinci: extend description of bindings
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx>
[PATCH v3 4/9] mtd: nand: davinci: simplify error handling
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx>
[PATCH v3 7/9] mtd: nand: davinci: adjust DT properties to MTD generic
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx>
[PATCH v3 9/9] mtd: nand: davinci: don't request AEMIF address range
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx>
[PATCH v3 1/9] mtd: nand: davinci: fix driver registration
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx>
[PATCH v3 0/9] Reuse davinci-nand driver for Keystone arch
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx>
Re: [PATCH v2] DT: ATA: Add missing documentation of clocks to marvell binding.
- From: Mark Rutland <mark.rutland@xxxxxxx>
Re: [PATCH] DT: ATA: Add missing documentation of clocks to marvell binding.
- From: Mark Rutland <mark.rutland@xxxxxxx>
[PATCHv4 4/4] ARM: socfpga_defconfig: enable SD/MMC support
- From: <dinguyen@xxxxxxxxxx>
[PATCHv4 3/4] mmc: dw_mmc-socfpga: Remove the SOCFPGA specific platform for dw_mmc
- From: <dinguyen@xxxxxxxxxx>
[PATCHv4 2/4] clk: socfpga: Add a hook for SD/MMC driver to control CIU clock settings
- From: <dinguyen@xxxxxxxxxx>
[PATCHv4 1/4] arm: dts: Add support for SD/MMC on SOCFPGA
- From: <dinguyen@xxxxxxxxxx>
[PATCHv4 0/4] socfpga: Enable SD/MMC support
- From: <dinguyen@xxxxxxxxxx>
Re: [PATCH 13/26] ARM: omap3.dtsi: add omapdss information
- From: Tony Lindgren <tony@xxxxxxxxxxx>
Re: [PATCH] pinctrl: samsung: Allow pin value to be initialized using pinfunc.
- From: Tomasz Figa <t.figa@xxxxxxxxxxx>
Re: [PATCH v8] gpio: add a driver for the Synopsys DesignWare APB GPIO block
- From: Jamie Iles <jamie@xxxxxxxxxxxxx>
[PATCH v2 4/4] Phy: Add DT nodes on kirkwood and Dove for the SATA PHY
- From: Andrew Lunn <andrew@xxxxxxx>
[PATCH v2 3/4] SATA: MV: Add support for the optional PHYs
- From: Andrew Lunn <andrew@xxxxxxx>
[PATCH v2 1/4] Phy: DT binding documentation for Marvell MVEBU SATA phy.
- From: Andrew Lunn <andrew@xxxxxxx>
[PATCH v2 2/4] Phy: Add a PHY driver for Marvell MVEBU SATA PHY.
- From: Andrew Lunn <andrew@xxxxxxx>
[PATCH v2 0/4] PHY driver for Marvell SATA
- From: Andrew Lunn <andrew@xxxxxxx>
Re: [PATCH] spi: dt-binding: clarify gpio chipselect language
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
Re: [PATCHv3 3/4] mmc: dw_mmc-socfpga: Clean up SOCFPGA platform specific funcationality
- From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
Re: [PATCHv3 4/4] arm: dts: Add support for SD/MMC on SOCFPGA
- From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
[PATCH v2] DT: ATA: Add missing documentation of clocks to marvell binding.
- From: Andrew Lunn <andrew@xxxxxxx>
[PATCHv13][ 4/4] ARM: dts: imx25: mbimxsd25: Add displays support.
- From: Denis Carikli <denis@xxxxxxxxxx>
[PATCHv13][ 3/4] video: Kconfig: Allow more broad selection of the imxfb framebuffer driver.
- From: Denis Carikli <denis@xxxxxxxxxx>
[PATCHv13][ 2/4] video: imxfb: Also add pwmr for the device tree.
- From: Denis Carikli <denis@xxxxxxxxxx>
Re: [RFC PATCH v3 1/8] mmc: omap_hsmmc: use devm_regulator API
- From: Balaji T K <balajitk@xxxxxx>
Re: [PATCH] pinctrl: samsung: Allow pin value to be initialized using pinfunc.
- From: Tomasz Figa <t.figa@xxxxxxxxxxx>
Re: [PATCH] pinctrl: samsung: Allow pin value to be initialized using pinfunc.
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH v4 0/9] phy: Add new Exynos USB 2.0 PHY driver
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
[PATCHv13] ARM: dts: Add support for the cpuimx25 board from Eukrea and its baseboard.
- From: Denis Carikli <denis@xxxxxxxxxx>
Re: [RFC PATCH v3 6/8] ARM: dts: add pbias-supply
- From: Balaji T K <balajitk@xxxxxx>
Re: [PATCH 2/2] mmc: dw_mmc: add dw_mmc-k3 for k3 platform
- From: Rob Herring <robherring2@xxxxxxxxx>
RE: [PATCH 2/2] mmc: dw_mmc: add dw_mmc-k3 for k3 platform
- From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
Re: [PATCH 1/2] ASoC: add DT binding document for MAX98090 CODEC
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 2/2] ASoC: tegra: add tegra+MAX98090 machine driver
- From: Mark Brown <broonie@xxxxxxxxxx>
[PATCH 3/3] Add support for the eukrea-cpuimx28.
- From: Denis Carikli <denis@xxxxxxxxxx>
[PATCH 2/3] ARM: dts: mxs: Add a new pin config for the usb0 ID.
- From: Denis Carikli <denis@xxxxxxxxxx>
[PATCH 1/3] ARM: dts: mxs: Add 18bit pin config for lcdif.
- From: Denis Carikli <denis@xxxxxxxxxx>
Re: [PATCH] DT: ATA: Add missing documentation of clocks to marvell binding.
- From: Andrew Lunn <andrew@xxxxxxx>
[PATCH 2/9] phy: core: Add devm_of_phy_get to phy-core
- From: Kamil Debski <k.debski@xxxxxxxxxxx>
[PATCH 1/9] phy: core: Change the way of_phy_get is called
- From: Kamil Debski <k.debski@xxxxxxxxxxx>
[PATCH v4 4/9] usb: ehci-s5p: Change to use phy provided by the generic phy framework
- From: Kamil Debski <k.debski@xxxxxxxxxxx>
[PATCH v4 5/9] usb: s3c-hsotg: Use the new Exynos USB phy driver with the generic phy framework
- From: Kamil Debski <k.debski@xxxxxxxxxxx>
[PATCH v4 3/9] phy: Add new Exynos USB PHY driver
- From: Kamil Debski <k.debski@xxxxxxxxxxx>
[PATCH v4 0/9] phy: Add new Exynos USB 2.0 PHY driver
- From: Kamil Debski <k.debski@xxxxxxxxxxx>
Re: [PATCH] DT: ATA: Add missing documentation of clocks to marvell binding.
- From: Mark Rutland <mark.rutland@xxxxxxx>
[PATCH] DT: ATA: Add missing documentation of clocks to marvell binding.
- From: Andrew Lunn <andrew@xxxxxxx>
Re: [PATCHv3 3/4] mmc: dw_mmc-socfpga: Clean up SOCFPGA platform specific funcationality
- From: Mark Rutland <mark.rutland@xxxxxxx>
Re: [PATCHv3 2/4] arm: dts: Add a system manager compatible property
- From: Mark Rutland <mark.rutland@xxxxxxx>
[PATCH] spi: dt-binding: clarify gpio chipselect language
- From: Baruch Siach <baruch@xxxxxxxxxx>
[PATCH v10 1/2] s5k5baf: add camera sensor driver
- From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
[PATCH v10 2/2] s5k5baf: add DT bindings for camera sensor
- From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
[PATCH v10 0/2] S5K5BAF camera sensor driver
- From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
[PATCH v6 1/5] watchdog: davinci: change driver to use WDT core
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx>
[PATCH 4/4] pinctrl: tegra: add pinmux controller driver for Tegra124
- From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
[PATCH 1/4] pinctrl: tegra: Add devicetree binding document for Tegra124
- From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
[PATCH 2/4] ARM: tegra: add pinmux controller to tegra124.dtsi
- From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
[PATCH 3/4] ARM: tegra: select PINCTRL_TEGRA124 for Tegra124 SoC
- From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
[PATCH 0/4] pinctrl: tegra: Add pincontrol driver for Tegra124 SoC
- From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
[PATCH V3 2/4] ARM: tegra: convert dts files of Tegra114 platforms to use pinctrl defines
- From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
[PATCH V3 0/4] ARM: tegra: convert dts files of all Tegra platforms to use pinctrl defines
- From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
[PATCH V3 3/4] ARM: tegra: convert dts files of Tegra20 platforms to use pinctrl defines
- From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
[PATCH V3 4/4] ARM: tegra: convert dts files of Tegra30 platforms to use pinctrl defines
- From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
[PATCH V3 1/4] ARM: tegra: Add header file for pinctrl constants
- From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
Re: [PATCH v4 12/15] usb: phy: msm: Add support for secondary PHY control
- From: Mark Rutland <mark.rutland@xxxxxxx>
Re: [PATCH v4 10/15] usb: phy: msm: Add device tree support and binding information
- From: Mark Rutland <mark.rutland@xxxxxxx>
Re: [PATCH 1/5] Phy: DT binding documentation for Marvell MVEBU SATA phy.
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
Re: [PATCH v7 2/2] mmc: sdhci-msm: Initial support for MSM chipsets
- From: Mark Rutland <mark.rutland@xxxxxxx>
Re: [PATCH 1/2] usb: chipidea: fix mistake in device tree binding of nspire-usb to use vendor name 'lsi' instead of SoC name 'zevio'
- From: Daniel Tang <dt.tangr@xxxxxxxxx>
[PATCH] ARM: dts: Fix mmc node on exynos5250 snow board
- From: Yuvaraj Kumar C D <yuvaraj.cd@xxxxxxxxx>
Re: [PATCH v7 1/2] mmc: sdhci-msm: Initial SDHCI MSM driver documentation
- From: Mark Rutland <mark.rutland@xxxxxxx>
Re: ARM: gic_arch_extn (Was: [PATCH v3] irqchip: mmp: add dt support for wakeup)
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: [PATCH 0/5] Add more device nodes for am43x-epos-evm
- From: Sourav Poddar <sourav.poddar@xxxxxx>
Re: [PATCH 0/3] Add more device nodes for am43x gp evm.
- From: Sourav Poddar <sourav.poddar@xxxxxx>
Re: [PATCH 1/5] Phy: DT binding documentation for Marvell MVEBU SATA phy.
- From: Andrew Lunn <andrew@xxxxxxx>
Re: [PATCH 1/5] Phy: DT binding documentation for Marvell MVEBU SATA phy.
- From: Andrew Lunn <andrew@xxxxxxx>
Re: [PATCH 00/26] OMAPDSS: DT support (Christmas edition)
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
Re: [PATCH v9] s5k5baf: add camera sensor driver
- From: Mark Rutland <mark.rutland@xxxxxxx>
Re: [PATCH 1/2] usb: chipidea: fix mistake in device tree binding of nspire-usb to use vendor name 'lsi' instead of SoC name 'zevio'
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
Re: [PATCH 00/17] Add memory mapped support for ti qspi, m25p80 serial flash.
- From: Sourav Poddar <sourav.poddar@xxxxxx>
Re: [PATCH RFC 1/4] phy: Add new Exynos5 USB 3.0 PHY driver
- From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
Re: [PATCH v3 04/10] usb: dwc3: use quirks to know if a particualr platform doesn't have PHY
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
Re: [PATCH v5 1/3] mtd: nand: gpio: Add DT property to automatically determine bus width
- From: Alexander Shiyan <shc_work@xxxxxxx>
Re: [PATCH 2/2] ARM: shmobile: armadillo: Set vccq_sdhi0 regulator type in DT
- From: Simon Horman <horms@xxxxxxxxxxxx>
[PATCH] powerpc/p1010rdb-pa: modify phy interrupt.
- From: Zhao Qiang <B45475@xxxxxxxxxxxxx>
[PATCH] usb: chipidea: fix device tree binding for zevio/nspire usb driver
- From: dt.tangr@xxxxxxxxx
Re: [PATCH v3 04/10] usb: dwc3: use quirks to know if a particualr platform doesn't have PHY
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
Re: [PATCH 4/5] Phy: Add DT nodes on kirkwood and Dove for the SATA PHY
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
Re: [PATCH 3/5] SATA: MV: Add support for the optional PHYs
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
Re: [PATCH 2/5] Phy: Add a PHY driver for Marvell MVEBU SATA PHY.
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
Re: [PATCH 1/5] Phy: DT binding documentation for Marvell MVEBU SATA phy.
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
Re: [PATCH 2/2] ARM: shmobile: armadillo: Set vccq_sdhi0 regulator type in DT
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Re: [PATCH 1/2] usb: chipidea: fix mistake in device tree binding of nspire-usb to use vendor name 'lsi' instead of SoC name 'zevio'
- From: Daniel Tang <dt.tangr@xxxxxxxxx>
Re: [PATCH 1/2] usb: chipidea: fix mistake in device tree binding of nspire-usb to use vendor name 'lsi' instead of SoC name 'zevio'
- From: Daniel Tang <dt.tangr@xxxxxxxxx>
Re: [PATCH 3/3] usb: phy-generic: Add ULPI VBUS support
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
Re: [PATCH 2/2] ARM: shmobile: armadillo: Set vccq_sdhi0 regulator type in DT
- From: Simon Horman <horms@xxxxxxxxxxxx>
Re: [PATCHv3 4/4] arm: dts: Add support for SD/MMC on SOCFPGA
- From: Arnd Bergmann <arnd@xxxxxxxx>
Re: [PATCHv3 1/4] clk: socfpga: Add a clock driver for SOCFPGA's system manager
- From: Arnd Bergmann <arnd@xxxxxxxx>
Re: [PATCH v5 1/3] mtd: nand: gpio: Add DT property to automatically determine bus width
- From: Brian Norris <computersforpeace@xxxxxxxxx>
Re: ARM: gic_arch_extn (Was: [PATCH v3] irqchip: mmp: add dt support for wakeup)
- From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
[PATCH 1/1] usb: doc: rename ci13xxx-imx.txt to ci-hdrc-imx.txt
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
Re: [PATCH v8 1/2] PWM: atmel-pwm: add PWM controller driver
- From: Bo Shen <voice.shen@xxxxxxxxx>
Re: ARM: gic_arch_extn (Was: [PATCH v3] irqchip: mmp: add dt support for wakeup)
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
[PATCH V2 1/2] Documentation: dt: OMAP: explicitly state SoC compatible strings
- From: Nishanth Menon <nm@xxxxxx>
[PATCH V2 0/2] ARM: OMAP2+/dts: standardize SoC naming
- From: Nishanth Menon <nm@xxxxxx>
[PATCH V2 2/2] ARM: OMAP2+: board-generic: update SoC compatibility strings
- From: Nishanth Menon <nm@xxxxxx>
Re: [PATCH 1/2] regulator: gpio-regulator: Add required regulator-type property
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
ARM: gic_arch_extn (Was: [PATCH v3] irqchip: mmp: add dt support for wakeup)
- From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Re: [PATCH 2/2] ASoC: tegra: add tegra+MAX98090 machine driver
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 1/2] regulator: gpio-regulator: Add required regulator-type property
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 2/2] ASoC: tegra: add tegra+MAX98090 machine driver
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
Re: [PATCH 2/2] ASoC: tegra: add tegra+MAX98090 machine driver
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH] of: Add simple panel device tree binding
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
[PATCH 1/7] dt-bindings: add Calxeda ECX-3000 clock binding
- From: Rob Herring <robherring2@xxxxxxxxx>
[PATCH 3/7] dt-bindings: Add Calxeda system registers binding
- From: Rob Herring <robherring2@xxxxxxxxx>
[PATCH 4/7] clk: highbank: prevent glitching when going into bypass mode
- From: Rob Herring <robherring2@xxxxxxxxx>
[PATCH 2/7] dt-bindings: Add property calxeda,pll-max-hz for Calxeda clocks
- From: Rob Herring <robherring2@xxxxxxxxx>
[PATCH 5/7] clk: highbank: allow for different PLL frequency range
- From: Rob Herring <robherring2@xxxxxxxxx>
[PATCH 7/7] clk: highbank: add DT match for calxeda,ecx-3000-sregs
- From: Rob Herring <robherring2@xxxxxxxxx>
[PATCH 6/7] clk: highbank: allow enabling by user
- From: Rob Herring <robherring2@xxxxxxxxx>
[PATCH 0/7] Calxeda arm64 clock updates
- From: Rob Herring <robherring2@xxxxxxxxx>
Re: [PATCH v9] s5k5baf: add camera sensor driver
- From: Sylwester Nawrocki <sylvester.nawrocki@xxxxxxxxx>
[PATCHv3 4/4] arm: dts: Add support for SD/MMC on SOCFPGA
- From: <dinguyen@xxxxxxxxxx>
[PATCHv3 2/4] arm: dts: Add a system manager compatible property
- From: <dinguyen@xxxxxxxxxx>
[PATCHv3 3/4] mmc: dw_mmc-socfpga: Clean up SOCFPGA platform specific funcationality
- From: <dinguyen@xxxxxxxxxx>
[PATCHv3 1/4] clk: socfpga: Add a clock driver for SOCFPGA's system manager
- From: <dinguyen@xxxxxxxxxx>
[PATCHv3 0/4] socfpga: Enable SD/MMC support
- From: <dinguyen@xxxxxxxxxx>
Re: [PATCH v3] irqchip: mmp: add dt support for wakeup
- From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
[PATCH] ASoC: tegra: update module reset list for Tegra124
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
[PATCH 2/2] ASoC: tegra: add tegra+MAX98090 machine driver
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
[PATCH 1/2] ASoC: add DT binding document for MAX98090 CODEC
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
Re: [PATCH/RFC] ARM: omap3: Split the pinmux core device
- From: Tony Lindgren <tony@xxxxxxxxxxx>
Re: [PATCH v5 1/5] watchdog: davinci: change driver to use WDT core
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
Re: [RFC PATCH] Documentation: devicetree: add description for generic bus properties
- From: Mark Brown <broonie@xxxxxxxxxx>
[PATCH v5 0/5] Update Davinci watchdog driver
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx>
[PATCH v5 5/5] watchdog: davinci: reuse driver for keystone arch
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx>
[PATCH v5 1/5] watchdog: davinci: change driver to use WDT core
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx>
[PATCH v5 3/5] watchdog: davinci: add GET_TIMELEFT option support
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx>
[PATCH v5 2/5] watchdog: davinci: use davinci_wdt_device structure to hold device data
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx>
[PATCH v5 4/5] watchdog: davinci: add "timeout-sec" property
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx>
Re: [PATCH] pinctrl: tegra124: add pinctrl driver for NVIDIA's Tegra124 SoC
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
Re: [PATCH] ARM: tegra: add port FF to GPIO ID's
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
Re: [PATCH 01/31] ARM: tegra: add missing clock documentation to DT bindings
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
Re: [PATCH v1 0/2] of: irq: Ignore disabled interrupt controllers
- From: Rob Herring <robherring2@xxxxxxxxx>
Re: [PATCH v2] OF: base: match each node compatible against all given matches first
- From: Rob Herring <robherring2@xxxxxxxxx>
Re: [PATCH 4/5] Phy: Add DT nodes on kirkwood and Dove for the SATA PHY
- From: Andrew Lunn <andrew@xxxxxxx>
Re: [PATCH v2 2/2] clk: add accuracy support for fixed clock
- From: Mike Turquette <mturquette@xxxxxxxxxx>
Re: [PATCH v4 1/5] watchdog: davinci: change driver to use WDT core
- From: "ivan.khoronzhuk" <ivan.khoronzhuk@xxxxxx>
Re: [PATCH 5/5] ARM: defconfig: Enable generic phy in dove and kirkwood.
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
Re: [RFC PATCH] Documentation: devicetree: add description for generic bus properties
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
[PATCH 4/4] arm64: removed using of the mask attribute in the dts for reset bit.
- From: Feng Kan <fkan@xxxxxxx>
[PATCH 1/4] Documentation: add dts binding for X-Gene reboot dts node.
- From: Feng Kan <fkan@xxxxxxx>
[PATCH 0/4] Add missing components for X-Gene reboot drivers.
- From: Feng Kan <fkan@xxxxxxx>
[PATCH 2/4] arm64: add missing dts entry for X-Gene platform.
- From: Feng Kan <fkan@xxxxxxx>
[PATCH 3/4] arm64: Enable system reset via arch Kconfig for X-Gene system.
- From: Feng Kan <fkan@xxxxxxx>
Re: [PATCH 4/5] Phy: Add DT nodes on kirkwood and Dove for the SATA PHY
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
Re: [PATCH v4 1/5] watchdog: davinci: change driver to use WDT core
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
Re: [PATCH/RFC] ARM: omap3: Split the pinmux core device
- From: Tony Lindgren <tony@xxxxxxxxxxx>
Re: [PATCH/RFC] ARM: omap3: Split the pinmux core device
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Re: [RFC PATCH] Documentation: devicetree: add description for generic bus properties
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH v4 1/5] watchdog: davinci: change driver to use WDT core
- From: "ivan.khoronzhuk" <ivan.khoronzhuk@xxxxxx>
Re: [PATCH v4 1/5] watchdog: davinci: change driver to use WDT core
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
Re: [PATCH/RFC] ARM: omap3: Split the pinmux core device
- From: Tony Lindgren <tony@xxxxxxxxxxx>
Re: [PATCH RESEND v5 1/2] PWM: PXA: add device tree support to PWM driver
- From: Mike Dunn <mikedunn@xxxxxxxxxxx>
Re: [PATCH v4 0/5] Update Davinci watchdog driver
- From: Sekhar Nori <nsekhar@xxxxxx>
Re: [PATCH v4 1/5] watchdog: davinci: change driver to use WDT core
- From: Sekhar Nori <nsekhar@xxxxxx>
Re: [PATCH/RFC] ARM: omap3: Split the pinmux core device
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Re: [PATCH 01/31] ARM: tegra: add missing clock documentation to DT bindings
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
Re: [PATCH/RFC] ARM: omap3: Split the pinmux core device
- From: Tony Lindgren <tony@xxxxxxxxxxx>
[PATCH 5/5] ARM: defconfig: Enable generic phy in dove and kirkwood.
- From: Andrew Lunn <andrew@xxxxxxx>
[PATCH 4/5] Phy: Add DT nodes on kirkwood and Dove for the SATA PHY
- From: Andrew Lunn <andrew@xxxxxxx>
[PATCH 3/5] SATA: MV: Add support for the optional PHYs
- From: Andrew Lunn <andrew@xxxxxxx>
[PATCH 2/5] Phy: Add a PHY driver for Marvell MVEBU SATA PHY.
- From: Andrew Lunn <andrew@xxxxxxx>
[PATCH 1/5] Phy: DT binding documentation for Marvell MVEBU SATA phy.
- From: Andrew Lunn <andrew@xxxxxxx>
[PATCH 0/5] MVEBU SATA PHY driver
- From: Andrew Lunn <andrew@xxxxxxx>
[PATCH/RFC] ARM: omap3: Split the pinmux core device
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Re: [PATCH RFC 2/2] Documentation: arm: define DT C-states bindings
- From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
Re: [PATCH V2 2/2] ARM: tegra: convert device tree file of Dalmore to use pinctrl defines
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
Re: [PATCH V2 1/2] ARM: tegra: Add header file for pinctrl constants
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
Re: [PATCH 2/2] ARM: tegra: convert device tree file of Dalmore to use pinctrl defines
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
[PATCH 2/2] ARM: integrator: move EBI to the device tree
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
Re: [PATCH RFC 2/2] Documentation: arm: define DT C-states bindings
- From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
Re: [PATCH 1/3] clk: bcm281xx: define kona clock binding
- From: Alex Elder <alex.elder@xxxxxxxxxx>
Re: [PATCH v3] checkpatch: add DT compatible string documentation checks
- From: Joe Perches <joe@xxxxxxxxxxx>
[PATCH v3] checkpatch: add DT compatible string documentation checks
- From: Rob Herring <robherring2@xxxxxxxxx>
Re: [PATCH 00/26] OMAPDSS: DT support (Christmas edition)
- From: Sebastian Reichel <sre@xxxxxxxxxx>
Re: [PATCH RFC 2/2] Documentation: arm: define DT C-states bindings
- From: Kumar Gala <galak@xxxxxxxxxxxxxx>
[PATCH v2 2/3] clk: bcm281xx: add initial clock framework support
- From: Alex Elder <alex.elder@xxxxxxxxxx>
[PATCH v2 3/3] ARM: dts: bcm281xx: define real clocks
- From: Alex Elder <alex.elder@xxxxxxxxxx>
[PATCH v2 1/3] clk: bcm281xx: define kona clock binding
- From: Alex Elder <alex.elder@xxxxxxxxxx>
[PATCH v2 0/3] clk: bcm281xx: define Broadcom kona clocks
- From: Alex Elder <alex.elder@xxxxxxxxxx>
Re: [PATCH RFC 2/2] Documentation: arm: define DT C-states bindings
- From: Dave Martin <Dave.Martin@xxxxxxx>
Re: [PATCH RFC 1/2] Documentation: arm: add cache DT bindings
- From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
Re: [PATCH v3 04/10] usb: dwc3: use quirks to know if a particualr platform doesn't have PHY
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
Re: [PATCH RFC 1/4] phy: Add new Exynos5 USB 3.0 PHY driver
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
Re: [PATCH 1/2] usb: chipidea: fix mistake in device tree binding of nspire-usb to use vendor name 'lsi' instead of SoC name 'zevio'
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
Re: [PATCH 2/3] clk: bcm281xx: add initial clock framework support
- From: Mark Rutland <mark.rutland@xxxxxxx>
Re: [PATCH v2] OF: base: match each node compatible against all given matches first
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
Re: [PATCH 2/3] clk: bcm281xx: add initial clock framework support
- From: Alex Elder <alex.elder@xxxxxxxxxx>
Re: [PATCH 1/4] usb: chipidea: msm: Add device tree binding information
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
Re: [PATCH v6 3/3] mfd: max14577: Add device tree bindings document
- From: Lee Jones <lee.jones@xxxxxxxxxx>
Re: [PATCH v6 3/3] mfd: max14577: Add device tree bindings document
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
Re: [PATCH RFC 1/2] Documentation: arm: add cache DT bindings
- From: Dave Martin <Dave.Martin@xxxxxxx>
Re: [PATCH 2/3] ARM: sunxi: Add an ahci-platform compatible AHCI driver for the Allwinner SUNXi series of SoCs
- From: Tejun Heo <tj@xxxxxxxxxx>
Re: [PATCH 3/3] ARM: dts: bcm281xx: define real clocks
- From: Alex Elder <alex.elder@xxxxxxxxxx>
Re: [PATCH 2/3] ARM: sunxi: Add an ahci-platform compatible AHCI driver for the Allwinner SUNXi series of SoCs
- From: Olliver Schinagl <oliver+list@xxxxxxxxxxx>
Re: [PATCH 2/3] ARM: sunxi: Add an ahci-platform compatible AHCI driver for the Allwinner SUNXi series of SoCs
- From: Tejun Heo <tj@xxxxxxxxxx>
Re: [PATCH 1/3] RFC: AHCI: libahci is missing DMA
- From: Oliver Schinagl <oliver@xxxxxxxxxxx>
Re: [PATCH v2] OF: base: match each node compatible against all given matches first
- From: Meelis Roos <mroos@xxxxxxxx>
Re: [PATCH 2/3] clk: bcm281xx: add initial clock framework support
- From: Alex Elder <alex.elder@xxxxxxxxxx>
Re: [PATCH 2/3] ARM: sunxi: Add an ahci-platform compatible AHCI driver for the Allwinner SUNXi series of SoCs
- From: Oliver Schinagl <oliver@xxxxxxxxxxx>
Re: [PATCH 2/3] ARM: sunxi: Add an ahci-platform compatible AHCI driver for the Allwinner SUNXi series of SoCs
- From: Oliver Schinagl <oliver@xxxxxxxxxxx>
Re: [PATCH v6 3/3] mfd: max14577: Add device tree bindings document
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 1/3] RFC: AHCI: libahci is missing DMA
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
Re: [PATCH 1/3] clk: bcm281xx: define kona clock binding
- From: Alex Elder <alex.elder@xxxxxxxxxx>
Re: [PATCH 2/3] ARM: sunxi: Add an ahci-platform compatible AHCI driver for the Allwinner SUNXi series of SoCs
- From: Tejun Heo <tj@xxxxxxxxxx>
Re: [PATCH 1/3] RFC: AHCI: libahci is missing DMA
- From: Oliver Schinagl <oliver@xxxxxxxxxxx>
Re: [PATCH 1/3] RFC: AHCI: libahci is missing DMA
- From: Tejun Heo <tj@xxxxxxxxxx>
[PATCH 06/26] OMAPDSS: if dssdev->name==NULL, use alias
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
[PATCH 01/26] OMAPDSS: rename display-sysfs 'name' entry
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
[PATCH 00/26] OMAPDSS: DT support (Christmas edition)
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
[PATCH 09/26] OMAPFB: search for default display with DT alias
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
[PATCH 07/26] OMAPDSS: get dssdev->alias from DT alias
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
[PATCH 08/26] OMAPFB: clean up default display search
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
[PATCH 12/26] OMAPDSS: Add DT support to DSI
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
[PATCH 11/26] OMAPDSS: Add DT support to DSS, DISPC, DPI, HDMI, VENC
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
[PATCH 13/26] ARM: omap3.dtsi: add omapdss information
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
[PATCH 18/26] ARM: omap3-beagle.dts: add display information
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
[PATCH 17/26] ARM: omap3-tobi.dts: add lcd (TEST)
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
[PATCH 20/26] OMAPDSS: panel-dsi-cm: Add DT support
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
[PATCH 19/26] ARM: omap3-beagle-xm.dts: add display information
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
[PATCH 22/26] OMAPDSS: connector-dvi: Add DT support
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
[PATCH 24/26] OMAPDSS: hdmi-connector: Add DT support
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
[PATCH 23/26] OMAPDSS: encoder-tpd12s015: Add DT support
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
[PATCH 25/26] OMAPDSS: panel-dpi: Add DT support
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
[PATCH 26/26] OMAPDSS: connector-analog-tv: Add DT support
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
[PATCH 21/26] OMAPDSS: encoder-tfp410: Add DT support
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
[PATCH 16/26] ARM: omap4-sdp.dts: add display information
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
[PATCH 14/26] ARM: omap4.dtsi: add omapdss information
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
[PATCH 15/26] ARM: omap4-panda.dts: add display information
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
[PATCH 10/26] OMAPDSS: add of helpers
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
[PATCH 03/26] ARM: OMAP: remove DSS DT hack
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
[PATCH 02/26] OMAPDSS: DSI: fix fifosize
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
[PATCH 05/26] ARM: OMAP2+: add omapdss_init_of()
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
[PATCH 04/26] OMAPDSS: remove DT hacks for regulators
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
Re: [PATCH] gpio: MOXA ART: rename moxart_gpio_base to base
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
Re: [PATCH 2/3] ARM: sunxi: Add an ahci-platform compatible AHCI driver for the Allwinner SUNXi series of SoCs
- From: Mark Rutland <mark.rutland@xxxxxxx>
Re: [PATCH 0/3] AHCI: sunxi: Add sunxi AHCI driver
- From: Olliver Schinagl <oliver+list@xxxxxxxxxxx>
Re: [PATCH 1/2] usb: chipidea: fix mistake in device tree binding of nspire-usb to use vendor name 'lsi' instead of SoC name 'zevio'
- From: Mark Rutland <mark.rutland@xxxxxxx>
[PATCH 2/3] ARM: sunxi: Add an ahci-platform compatible AHCI driver for the Allwinner SUNXi series of SoCs
- From: oliver@xxxxxxxxxxx
[PATCH 3/3] ARM: sunxi: dts: Add ahci support to a few A10 and A20 boards
- From: oliver@xxxxxxxxxxx
[PATCH 0/3] AHCI: sunxi: Add sunxi AHCI driver
- From: oliver@xxxxxxxxxxx
[PATCH 1/3] RFC: AHCI: libahci is missing DMA
- From: oliver@xxxxxxxxxxx
[PATCH v3] irqchip: mmp: add dt support for wakeup
- From: Neil Zhang <zhangwm@xxxxxxxxxxx>
Re: [PATCH v8] gpio: add a driver for the Synopsys DesignWare APB GPIO block
- From: Mark Rutland <mark.rutland@xxxxxxx>
Re: [PATCH v6 3/3] mfd: max14577: Add device tree bindings document
- From: Lee Jones <lee.jones@xxxxxxxxxx>
Re: [PATCH 3/3] ARM: dts: bcm281xx: define real clocks
- From: Mark Rutland <mark.rutland@xxxxxxx>
Re: [PATCH 2/3] clk: bcm281xx: add initial clock framework support
- From: Mark Rutland <mark.rutland@xxxxxxx>
Re: [PATCH v6 3/3] mfd: max14577: Add device tree bindings document
- From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
Re: [PATCH v6 3/3] mfd: max14577: Add device tree bindings document
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
Re: [PATCH v6 3/3] mfd: max14577: Add device tree bindings document
- From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
Re: [PATCH v6 3/3] mfd: max14577: Add device tree bindings document
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
Re: [PATCH v4 0/4] LP3943 MFD driver for a GPIO expander and a PWM generator
- From: Lee Jones <lee.jones@xxxxxxxxxx>
Re: [PATCH v6 3/3] mfd: max14577: Add device tree bindings document
- From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
[PATCH v6 2/3] regulator: max14577: Add regulator driver for Maxim 14577
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
[PATCH v6 0/3] mfd: max14577: Add max14577 MFD drivers
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
[PATCH v6 3/3] mfd: max14577: Add device tree bindings document
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
[PATCH v6 1/3] charger: max14577: Add charger support for Maxim 14577
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
Re: [PATCH v4 0/4] LP3943 MFD driver for a GPIO expander and a PWM generator
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
Re: [PATCH v4 4/4] Documentation: add LP3943 DT bindings and document
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
Re: [PATCH v4 3/4] pwm: add LP3943 PWM driver
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
Re: [PATCH v2] ARM: davinci: aemif: get rid of davinci-nand driver dependency on aemif
- From: "ivan.khoronzhuk" <ivan.khoronzhuk@xxxxxx>
Re: [PATCH v8 1/2] PWM: atmel-pwm: add PWM controller driver
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
Re: [PATCHv6 05/13] iommu/core: add ops->{bound,unbind}_driver()
- From: Will Deacon <will.deacon@xxxxxxx>
Re: [PATCH 3/3] usb: phy-generic: Add ULPI VBUS support
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
Re: [PATCH] gpu: host1x: Add MIPI pad calibration DT bindings
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
Re: [PATCH v2] OF: base: match each node compatible against all given matches first
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
Re: [PATCH 1/3] clk: bcm281xx: define kona clock binding
- From: Mark Rutland <mark.rutland@xxxxxxx>
Re: [PATCH V5 1/1] drivers/gpio: Altera soft IP GPIO driver
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
Re: [PATCH RESEND v5 1/2] PWM: PXA: add device tree support to PWM driver
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
[PATCH 2/2] arm: nspire: modify device tree to use the nspire-usb driver
- From: dt.tangr@xxxxxxxxx
[PATCH 1/2] usb: chipidea: fix mistake in device tree binding of nspire-usb to use vendor name 'lsi' instead of SoC name 'zevio'
- From: dt.tangr@xxxxxxxxx
Re: [PATCH RESEND v5 1/2] PWM: PXA: add device tree support to PWM driver
- From: Haojian Zhuang <haojian.zhuang@xxxxxxxxxx>
Re: [PATCH RESEND v5 1/2] PWM: PXA: add device tree support to PWM driver
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
Re: [PATCH 03/31] ARM: tegra: document use of standard DMA DT bindings
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
Re: [PATCH 02/31] ARM: tegra: document reset properties in DT bindings
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
Re: [PATCH 01/31] ARM: tegra: add missing clock documentation to DT bindings
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
Re: [PATCH 01/31] ARM: tegra: add missing clock documentation to DT bindings
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
Re: [PATCH 1/4] usb: chipidea: msm: Add device tree binding information
- From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
Re: [PATCH V2 1/2] ARM: tegra: Add header file for pinctrl constants
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
[PATCH v3] usb: gadget: Add UDC driver for Aeroflex Gaisler GRUSBDC
- From: Andreas Larsson <andreas@xxxxxxxxxxx>
Re: [PATCH v4 0/4] LP3943 MFD driver for a GPIO expander and a PWM generator
- From: Lee Jones <lee.jones@xxxxxxxxxx>
Re: [PATCHv6 05/13] iommu/core: add ops->{bound,unbind}_driver()
- From: Hiroshi Doyu <hdoyu@xxxxxxxxxx>
Re: [PATCH 3/4] Regulators: TPS65218: Add Regulator driver for TPS65218 PMIC
- From: Manish Badarkhe <badarkhe.manish@xxxxxxxxx>
Re: [PATCHv3] usb: chipidea: add support for USB OTG controller on TI-NSPIRE
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
Re: [PATCH 3/3] usb: phy-generic: Add ULPI VBUS support
- From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
Re: [PATCH v2] checkpatch: add DT compatible string documentation checks
- From: Joe Perches <joe@xxxxxxxxxxx>
Re: [PATCH 1/4] usb: chipidea: msm: Add device tree binding information
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
RE: [PATCHv6 1/4] pwm: Add Freescale FTM PWM driver support
- From: Li Xiubo <Li.Xiubo@xxxxxxxxxxxxx>
Re: [PATCH 3/4] Regulators: TPS65218: Add Regulator driver for TPS65218 PMIC
- From: Keerthy <a0393675@xxxxxx>
Re: [PATCH 2/2] ARM: tegra: convert device tree file of Dalmore to use pinctrl defines
- From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
Re: [PATCH 1/2] ARM: dts: tegra: Header file for pinctrl constants
- From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
Re: [PATCH] ARM: tegra: convert device tree files to use key defines
- From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
Re: [PATCH v1 1/2] of: irq: Ignore disabled intc's when searching map
- From: Peter Crosthwaite <peter.crosthwaite@xxxxxxxxxx>
[PATCH 3/4] ARM: exynos: dts: cros5250: Add hdmi phy settings
- From: Shirish S <s.shirish@xxxxxxxxxxx>
[PATCH 1/4] ARM: dts: smdk5250: Add hdmi phy settings
- From: Shirish S <s.shirish@xxxxxxxxxxx>
[PATCH 4/4] drm: exynos: hdmi: Add dt support for hdmiphy settings
- From: Shirish S <s.shirish@xxxxxxxxxxx>
[PATCH 2/4] ARM: dts: arndale: Add hdmi phy settings
- From: Shirish S <s.shirish@xxxxxxxxxxx>
[PATCH 0/4] Add dt support for exynos hdmiphy settings
- From: Shirish S <s.shirish@xxxxxxxxxxx>
Re: [PATCH 4/4] drm: exynos: hdmi: Add dt support for hdmiphy settings
- From: Shirish S <shirish@xxxxxxxxxxxx>
[PATCH v2] checkpatch: add DT compatible string documentation checks
- From: Rob Herring <robherring2@xxxxxxxxx>
[PATCH 2/3] clk: bcm281xx: add initial clock framework support
- From: Alex Elder <alex.elder@xxxxxxxxxx>
[PATCH 3/3] ARM: dts: bcm281xx: define real clocks
- From: Alex Elder <alex.elder@xxxxxxxxxx>
[PATCH 1/3] clk: bcm281xx: define kona clock binding
- From: Alex Elder <alex.elder@xxxxxxxxxx>
[PATCH 0/3] clk: bcm281xx: define Broadcom kona clocks
- From: Alex Elder <alex.elder@xxxxxxxxxx>
Re: [PATCH 3/4] ARM: mvebu: NETGEAR ReadyNAS 104 .dts file cleanup
- From: Rob Herring <robherring2@xxxxxxxxx>
Re: [PATCH v8 1/2] PWM: atmel-pwm: add PWM controller driver
- From: Bo Shen <voice.shen@xxxxxxxxx>
Re: [PATCH RESEND v5 1/2] PWM: PXA: add device tree support to PWM driver
- From: Haojian Zhuang <haojian.zhuang@xxxxxxxxxx>
Re: [PATCH v4 0/4] LP3943 MFD driver for a GPIO expander and a PWM generator
- From: Milo Kim <milo.kim@xxxxxx>
Re: [PATCH v3 3/4] pwm: add LP3943 PWM driver
- From: Milo Kim <milo.kim@xxxxxx>
[PATCH] net: davinci_emac: Fix platform data handling and make usable for am3517
- From: Tony Lindgren <tony@xxxxxxxxxxx>
Re: [PATCH v2] OF: base: match each node compatible against all given matches first
- From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
Re: [RFC PATCH 0/3] DT support for ST micro accelerometers and gyroscopes
- From: Jean Delvare <khali@xxxxxxxxxxxx>
Re: [RFC PATCH 0/3] DT support for ST micro accelerometers and gyroscopes
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
Re: [PATCH REPOST] MAINTAINERS: remove swarren from DT bindings
- From: Rob Herring <robherring2@xxxxxxxxx>
[PATCH REPOST] MAINTAINERS: remove swarren from DT bindings
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
Re: [PATCH v3 2/2] iio: Add new driver dht11
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
Re: [PATCH] gpu: host1x: Add MIPI pad calibration DT bindings
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
Re: [RFC][PATCHv6+++ 01/13] of: introduce of_property_for_earch_phandle_with_args()
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
Re: [PATCH v2] OF: base: match each node compatible against all given matches first
- From: Meelis Roos <mroos@xxxxxxxx>
Re: [PATCH 2/2] ARM: tegra: convert device tree file of Dalmore to use pinctrl defines
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>

[Index of Archives] [Device Tree Spec] [Linux USB Devel] [Video for Linux] [Scanner Discussion] [Linux SCSI] [Samba] [Yosemite News]