Add device tree binding documentation for Texas Instrument's wl1251
wireless lan chip. For now only the SPI binding is documented.
Signed-off-by: Sebastian Reichel <sre@xxxxxxxxxx>
---
.../devicetree/bindings/net/wireless/ti,wl1251.txt | 39 ++++++++++++++++++++++
1 file changed, 39 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
new file mode 100644
index 0000000..189ae5c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
@@ -0,0 +1,39 @@
+* Texas Instruments wl1251 wireless lan controller
+
+The wl1251 chip can be connected via SPI or via SDIO. This
+document describes the binding for the SPI connected chip.
+
+Required properties:
+- compatible : Should be "ti,wl1251"
+- reg : Chip select address of device
+- spi-max-frequency : Maximum SPI clocking speed of device in Hz
+- interrupts : Should contain interrupt line
+- interrupt-parent : Should be the phandle for the interrupt controller
+ that services interrupts for this device
+- vio-supply : phandle to regulator providing VIO
+- ti,power-gpio : GPIO connected to chip's PMEN pin
+
+Optional properties:
+- ti,wl1251-has-eeprom : boolean, the wl1251 has an eeprom connected, which
+ provides configuration data (calibration, MAC, ...)
+- Please consult Documentation/devicetree/bindings/spi/spi-bus.txt
+ for optional SPI connection related properties,
+
+Examples:
+
+&spi1 {
+ wl1251@0 {
+ compatible = "ti,wl1251";
+
+ reg = <0>;
+ spi-max-frequency = <48000000>;
+ spi-cpol;
+ spi-cpha;
+
+ interrupt-parent = <&gpio2>;
+ interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */
+
+ vio-supply = <&vio>;
+ ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */
+ };
+};
--
1.8.4.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
